About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [357 citations: 1–100 of 345 articles]

Articles published in International Journal of Polymer Science have been cited 357 times. The following is a list of the 345 articles that have cited the articles published in International Journal of Polymer Science.

  • Christopher A McKay, Rebecca D Pomrenke, Joshua S McLane, Nicholas J Schaub, Elise K DeSimone, Lee A. Ligon, and Ryan J Gilbert, “An Injectable, Calcium Responsive Composite Hydrogel for the Treatment of Acute Spinal Cord Injury,” ACS Applied Materials & Interfaces, pp. 140103091723000, 2014. View at Publisher · View at Google Scholar
  • Peng Yang, and Wantai Yang, “Hydroxylation of Organic Polymer Surface: Method and Application,” ACS Applied Materials & Interfaces, pp. 140306115004002, 2014. View at Publisher · View at Google Scholar
  • M. Binazadeh, and L. D. Unsworth, “Effect of peptide secondary structure on adsorption and adsorbed film prope rties on end-grafted polyethylene oxide layers,” Acta Biomaterialia, vol. 10, no. 1, pp. 56–66, 2014. View at Publisher · View at Google Scholar
  • S. Jana, B.J. Tefft, D.B. Spoon, and R.D. Simari, “Scaffolds for tissue engineering of cardiac valves,” Acta Biomaterialia, 2014. View at Publisher · View at Google Scholar
  • Ramses V. Martinez, Anand Bala Subramaniam, Hyo Jae Yoon, Rui M. D. Nunes, Heiko Lange, Martin M. Thuo, and George M. Whitesides, “Omniphobic "R-F Paper" Produced by Silanization of Paper with Fluoroalkyltr ichlorosilanes,” Advanced Functional Materials, vol. 24, no. 1, pp. 60–70, 2014. View at Publisher · View at Google Scholar
  • Nazia Mehrban, Edgardo Abelardo, Alexandra Wasmuth, Kieran L. Hudson, Leanne M. Mullen, Andrew R. Thomson, Martin A. Birchall, and Derek N. Woolfson, “Assessing Cellular Response to Functionalized α-Helical Peptide Hydrogels,” Advanced Healthcare Materials, 2014. View at Publisher · View at Google Scholar
  • Eduardo Sadot Herrera-Sosa, Gonzalo Martínez-Barrera, Carlos Barrera-Díaz, and Epifanio Cruz-Zaragoza, “Waste Tire Particles and Gamma Radiation as Modifiers of the Mechanical Properties of Concrete,” Advances in Materials Science and Engineering, vol. 2014, pp. 1–7, 2014. View at Publisher · View at Google Scholar
  • Muhammet Samet Kilic, Seyda Korkut, and Baki Hazer, “Electrical Energy Generation From a Novel Polypropylene Grafted Polyethylene Glycol Based Enzymatic Fuel Cell,” Analytical Letters, pp. 140201072233004, 2014. View at Publisher · View at Google Scholar
  • Marcela M.M. Bilek, “Biofunctionalisation of surfaces by energetic ion implantation: review of progress on applications in implantable biomedical devices and antibody microarrays,” Applied Surface Science, 2014. View at Publisher · View at Google Scholar
  • Takuhiro Ishii, and Tomonobu Mizumo, “Facile Preparation of Ionic Liquid Containing Silsesquioxane Framework,” Bulletin of The Chemical Society of Japan, vol. 87, no. 1, pp. 155–159, 2014. View at Publisher · View at Google Scholar
  • J. P. Mikkola, D. Yu. Murzin, M. Vaher, M. Kaljurand, and M. Koel, “Sugars and sugar derivatives in ionic liquid media obtained from lignocellu losic biomass: Comparison of capillary electrophoresis and chromatographic analysis,” Catalysis Today, vol. 223, pp. 18–24, 2014. View at Publisher · View at Google Scholar
  • Caspar Paetz, and Rainer Hagen, “Melt Phase Polymerization of Racemic Lactide to High-Performance Poly(Lactic Acid),” Chemie Ingenieur Technik, 2014. View at Publisher · View at Google Scholar
  • Sami Boufi, Annamaria Celli, and Sarita Kango, “Nanofibrillated cellulose: surface modification and potential applications,” Colloid and Polymer Science, vol. 292, no. 1, pp. 5–31, 2014. View at Publisher · View at Google Scholar
  • Kohsaku Kawakami, “Preparation of polyoligo(ethyleneglycol) methacrylate decorated with pendan t cholesterol moieties: Hydrogel and mesoglobule preparation and their use for entrapping lipophilic nanomaterials,” Colloids and Surfaces A-Physicochemical and Engineering Aspects, vol. 444, pp. 173–179, 2014. View at Publisher · View at Google Scholar
  • Nabihah Sallih, Peter Lescher, and Debes Bhattacharyya, “Factorial Study of Material and Process Parameters on the Mechanical Properties of Extruded Kenaf Fibre/Polypropylene Composite Sheets,” Composites Part A: Applied Science and Manufacturing, 2014. View at Publisher · View at Google Scholar
  • C. Mattrand, A. Béakou, and K. Charlet, “Numerical modeling of the flax fiber morphology variability,” Composites Part A: Applied Science and Manufacturing, 2014. View at Publisher · View at Google Scholar
  • Cato T. Laurencin, Keshia M. Ashe, Nicole Henry, Ho Man Kan, and Kevin W.-H. Lo, “Delivery of small molecules for bone regenerative engineering: preclinical studies and potential clinical applications,” Drug Discovery Today, 2014. View at Publisher · View at Google Scholar
  • A. P. Jovanović, M. N. Stankov, V. Lj. Marković, and S. N. Stamenković, “The validity of the one-dimensional fluid model of electrical breakdown in synthetic air at low pressure,” EPL (Europhysics Letters), vol. 104, no. 6, pp. 65001, 2014. View at Publisher · View at Google Scholar
  • Nadia Hégarat, Darya Novopashina, Alesya A. Fokina, Alexandre S. Boutorine, Alya G. Venyaminova, Danièle Praseuth, and Jean-Christophe François, “Monitoring DNA triplex formation using multicolor fluorescence and application to insulin-like growth factor I promoter downregulation,” FEBS Journal, 2014. View at Publisher · View at Google Scholar
  • Abdolrasoul Soleimani, Stephan Drappel, Rina Carlini, and Adela Goredema, “Structure-Property Relationships for a Series of Poly(ester amide)s, Contai ning Amino Acids,” Industrial & Engineering Chemistry Research, vol. 53, no. 4, pp. 1452–1460, 2014. View at Publisher · View at Google Scholar
  • Nicolas Le Moigne, Marc Longerey, Jean-Marie Taulemesse, Jean-Charles Bénézet, and Anne Bergeret, “Study of the interface in natural fibres reinforced poly(lactic acid) biocomposites modified by optimized organosilane treatments,” Industrial Crops and Products, vol. 52, pp. 481–494, 2014. View at Publisher · View at Google Scholar
  • Michael George, Paolo G. Mussone, and David C. Bressler, “Surface and thermal characterization of natural fibres treated with enzymes,” Industrial Crops and Products, vol. 53, pp. 365–373, 2014. View at Publisher · View at Google Scholar
  • Mina Beyki, Sara Zhaveh, Seyede Tahere Khalili, Tavoos Rahmani-Cherati, Alina Abollahi, Mansour Bayat, Meisam Tabatabaei, and Afshin Mohsenifar, “Encapsulation of Mentha piperita essential oils in chitosan–cinnamic acid nanogel with enhanced antimicrobial activity against Aspergillus flavus,” Industrial Crops and Products, vol. 54, pp. 310–319, 2014. View at Publisher · View at Google Scholar
  • M. Lerasle, M. Federighi, H. Simonin, V. Anthoine, S. Rezé, R. Chéret, and S. Guillou, “Combined use of modified atmosphere packaging and high pressure to extend the shelf-life of raw poultry sausage,” Innovative Food Science & Emerging Technologies, 2014. View at Publisher · View at Google Scholar
  • Sunita Nayak, Sanchareeka Dey, and Subhas C. Kundu, “Silk sericin-alginate-chitosan microcapsules: Hepatocytes encapsulation for enhanced cellular functions,” International Journal of Biological Macromolecules, 2014. View at Publisher · View at Google Scholar
  • T. Hajeeth., P.N. Sudha., K. Vijayalakshmi., and T. Gomathi., “Sorption studies on cr (vi) removal from aqueous solution using cellulose grafted with acrylonitrile monomer,” International Journal of Biological Macromolecules, 2014. View at Publisher · View at Google Scholar
  • Jong Seo Lee, Sang Dae Baek, Jayachandran Venkatesan, Ira Bhatnagar, Hee Kyung Chang, Hui Taek Kim, and Se-Kwon Kim, “In vivo study of chitosan-natural nano hydroxyapatite scaffolds for bone tissue regeneration,” International Journal of Biological Macromolecules, 2014. View at Publisher · View at Google Scholar
  • Luciano F. Boesel, Sylvaine Le Meur, Linda Thöny-Meyer, and Qun Ren, “The effect of molecular weight on the material properties ofbiosynthesized poly(4-hydroxybutyrate),” International Journal of Biological Macromolecules, 2014. View at Publisher · View at Google Scholar
  • Richard C. Petersen, “Computational conformational antimicrobial analysis developing mechanomolecular theory for polymer biomaterials in materials science and engineering,” International Journal of Computational Materials Science and Engineering, pp. 1450003, 2014. View at Publisher · View at Google Scholar
  • Piergiorgio Gentile, Valeria Chiono, Irene Carmagnola, and Paul Hatton, “An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering,” International Journal of Molecular Sciences, vol. 15, no. 3, pp. 3640–3659, 2014. View at Publisher · View at Google Scholar
  • S. S. Saravanakumar, A. Kumaravel, T. Nagarajan, and I. Ganesh Moorthy, “ Investigation on Physicochemical Properties of Alkali Treated Prosopis juliflora Fibers ,” International Journal of Polymer Analysis and Characterization, pp. 140319112856005, 2014. View at Publisher · View at Google Scholar
  • Joyce Cristina Cruz Santos, Alexandra A. P. Mansur, and Virginia S. T. Ciminelli, “Nanocomposites of Poly(Vinyl Alcohol)/Functionalized-Multiwall Carbon Nanot ubes Conjugated With Glucose Oxidase for Potential Application as Scaffolds in Skin Wound Healing,” International Journal of Polymeric Materials and Polymeric Biomaterials, vol. 63, no. 4, pp. 185–196, 2014. View at Publisher · View at Google Scholar
  • Tayebeh Behzad, and Rouhollah Bagheri, “Extraction and Characterization of Rice Straw Cellulose Nanofibers by an Op timized Chemomechanical Method,” Journal of Applied Polymer Science, vol. 131, no. 7, 2014. View at Publisher · View at Google Scholar
  • Fahmina Zafar, Hina Zafar, and Eram Sharmin, “Vegetable oil based polyurethanamide/organo-montmorillonite bio-nanocomposite,” Journal of Applied Polymer Science, 2014. View at Publisher · View at Google Scholar
  • S. Suganya, J. Venugopa, S. Ramakrishna, and B. S. Lakshmi, “Aloe Vera/Silk Fibroin/Hydroxyapatite Incorporated Electrospun Nanofibrous Scaffold for Enhanced Osteogenesis,” Journal of Biomaterials and Tissue Engineering, vol. 4, no. 1, pp. 9–19, 2014. View at Publisher · View at Google Scholar
  • Simzar Hosseinzadeh, Sayed Mahdi Rezayat, Jafar Ai, and Mohammad Vasei, “The activation of satellite cells by nanofibrous poly epsilon-caprolacton c onstructs,” Journal of Biomaterials Applications, vol. 28, no. 6, pp. 801–812, 2014. View at Publisher · View at Google Scholar
  • Marcin Lipowiecki, Markéta Ryvolová, Ákos Töttösi, Niels Kolmer, Sumsun Naher, Stephen A. Brennan, Mercedes Vázquez, and Dermot Brabazon, “Permeability of rapid prototyped artificial bone scaffold structures,” Journal of Biomedical Materials Research Part A, 2014. View at Publisher · View at Google Scholar
  • Hilal Unal Gulsuner, Nevin Atalay Gengec, Murat Kilinc, H. Yildirim Erbil, and Ayse B. Tekinay, “Osteoselection supported by phase separated polymer blend films,” Journal of Biomedical Materials Research Part A, 2014. View at Publisher · View at Google Scholar
  • Rosa Akbarzadeh, and Azizeh-Mitra Yousefi, “Effects of processing parameters in thermally induced phase separation technique on porous architecture of scaffolds for bone tissue engineering,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2014. View at Publisher · View at Google Scholar
  • Faris M. AL-Oqla, and S.M. Sapuan, “Natural fiber reinforced polymer composites in industrial applications: feasibility of date palm fibers for sustainable automotive industry,” Journal of Cleaner Production, vol. 66, pp. 347–354, 2014. View at Publisher · View at Google Scholar
  • Xinsheng Yang, Hern Kim, Liqin Yang, and Cuihua Cheng, “Composite varistors based on epoxy resin/La0.8Sr0.2MnO3,” Journal of Composite Materials, vol. 48, no. 6, pp. 677–681, 2014. View at Publisher · View at Google Scholar
  • Takahiro Tokunaga, Miki Shoiriki, and Tomonobu Mizumo, “Preparation of low-crystalline POSS containing two types of alkylammonium g roups and its optically transparent film,” Journal of Materials Chemistry C, vol. 2, no. 14, pp. 2496–2501, 2014. View at Publisher · View at Google Scholar
  • Alisa Katsen-Globa, Ina Meiser, Yuriy A. Petrenko, Roman V. Ivanov, Vladimir I. Lozinsky, and Alexander Yu. Petrenko, “Towards ready-to-use 3-D scaffolds for regenerative medicine: adhesion-base d cryopreservation of human mesenchymal stem cells attached and spread with in alginate-gelatin cryogel scaffolds,” Journal of Materials Science-Materials in Medicine, vol. 25, no. 3, pp. 857–871, 2014. View at Publisher · View at Google Scholar
  • Michael J. Whitcombe, Nicole Kirsch, and Ian A. Nicholls, “Molecular imprinting science and technology: a survey of the literature for the years 2004-2011,” Journal of Molecular Recognition, vol. 27, no. 6, pp. 297–401, 2014. View at Publisher · View at Google Scholar
  • Ankush A. Gokhale, “Recent Advances in the Fabrication of Nanostructured Barrier Films,” Journal of Nanoscience and Nanotechnology, vol. 14, no. 3, pp. 2157–2177, 2014. View at Publisher · View at Google Scholar
  • Phl Phuong Ha-Lien Tran, and Tv Toi Van Vo, “Polymer Conjugate-Based Nanomaterials for Drug Delivery,” Journal of Nanoscience and Nanotechnology, vol. 14, no. 1, pp. 815–827, 2014. View at Publisher · View at Google Scholar
  • Vuyiswa J. Mkhabela, “Poly(epsilon-caprolactone) Nanocomposite Scaffolds for Tissue Engineering: A Brief Overview,” Journal of Nanoscience and Nanotechnology, vol. 14, no. 1, pp. 535–545, 2014. View at Publisher · View at Google Scholar
  • Liliana Polo-Corrales, and Magda Latorre-Esteves, “Scaffold Design for Bone Regeneration,” Journal of Nanoscience and Nanotechnology, vol. 14, no. 1, pp. 15–56, 2014. View at Publisher · View at Google Scholar
  • Ahmad Oryan, Soodeh Alidadi, and Nicola Maffulli, “Bone regenerative medicine: classic options, novel strategies, and future d irections,” Journal of Orthopaedic Surgery and Research, vol. 9, 2014. View at Publisher · View at Google Scholar
  • Tian-Xiang Xiang, and Bradley D. Anderson, “ Water Uptake, Distribution, and Mobility in Amorphous Poly( d , l -Lactide) by Molecular Dynamics Simulation ,” Journal of Pharmaceutical Sciences, 2014. View at Publisher · View at Google Scholar
  • Eduardo Aluicio-Sarduy, Aliaksandr Baidak, and Georgios C. Vougioukalakis, “Phosphorimetric Characterization of Solution-Processed Polymeric Oxygen Bar riers for the Encapsulation of Organic Electronics,” Journal of Physical Chemistry C, vol. 118, no. 5, pp. 2361–2369, 2014. View at Publisher · View at Google Scholar
  • Qing-Bo Wei, Feng Fu, Yu-Qi Zhang, and Long Tang, “Preparation, characterization, and antibacterial properties of pH-responsive P(MMA-co-MAA)/silver nanocomposite hydrogels,” Journal of Polymer Research, vol. 21, no. 2, 2014. View at Publisher · View at Google Scholar
  • Tuğba Toraman, and Baki Hazer, “Synthesis and Characterization of the Novel Thermoresponsive Conjugates Based on Poly(3-hydroxy alkanoates),” Journal of Polymers and the Environment, 2014. View at Publisher · View at Google Scholar
  • D. Puglia, R. Petrucci, E. Fortunati, F. Luzi, J.M. Kenny, and L. Torre, “Revalorisation of Posidonia Oceanica as Reinforcement in Polyethylene/Maleic Anhydride Grafted Polyethylene Composites,” Journal of Renewable Materials, vol. 2, no. 1, pp. 66–76, 2014. View at Publisher · View at Google Scholar
  • Aniket Vyas, and Jude O. Iroh, “Thermal behavior and structure of clay/nylon-6 nanocomposite synthesized by in situ solution polymerization,” Journal of Thermal Analysis and Calorimetry, 2014. View at Publisher · View at Google Scholar
  • A.G. Supri, S.J. Tan, H. Ismail, and P.L. Teh, “Properties of (Low-density polyethylene)/(natural rubber)/(water hyacinth fiber) composites: The effect of polyaniline,” Journal of Vinyl and Additive Technology, 2014. View at Publisher · View at Google Scholar
  • Maria A. Woodruff, Roland Steck, Dietmar W. Hutmacher, Brooke L. Farrugia, and Tim R. Dargaville, “Enzymatic Synthesis of Amylose Brushes Revisited: Details from X-Ray Photoe lectron Spectroscopy and Spectroscopic Ellipsometry,” Macromolecular Bioscience, vol. 14, no. 2, pp. 202–214, 2014. View at Publisher · View at Google Scholar
  • Roberto Pantani, Marius Murariu, and Philippe Dubois, “PLA/Halloysite Nanocomposite Films: Water Vapor Barrier Properties and Spec ific Key Characteristics,” Macromolecular Materials and Engineering, vol. 299, no. 1, pp. 104–115, 2014. View at Publisher · View at Google Scholar
  • Andrzej K. Bledzki, Hans-Peter Fink, and Mohini Sain, “Progress Report on Natural Fiber Reinforced Composites,” Macromolecular Materials and Engineering, vol. 299, no. 1, pp. 9–26, 2014. View at Publisher · View at Google Scholar
  • Elena Părpăriţă, Raluca Nicoleta Darie, Carmen-Mihaela Popescu, Md. Azhar Uddin, and Cornelia Vasile, “Structure–morphology–mechanical properties relationship of some polypropylene/lignocellulosic composites,” Materials & Design, vol. 56, pp. 763–772, 2014. View at Publisher · View at Google Scholar
  • Carolina P. Ollé Resa, Rosa J. Jagus, and Lía N. Gerschenson, “Effect of natamycin, nisin and glycerol on the physicochemical properties, roughness and hydrophobicity of tapioca starch edible films,” Materials Science and Engineering: C, 2014. View at Publisher · View at Google Scholar
  • Markus Schmid, Sven Sängerlaub, Laura Wege, and Andreas Stäbler, “Properties of Transglutaminase Crosslinked Whey Protein Isolate Coatings and Cast Films,” Packaging Technology and Science, 2014. View at Publisher · View at Google Scholar
  • H. Surya Prakash Rao, Avinash Desai, Ivy Sarkar, Monalisa Mohapatra, and Ashok Kumar Mishra, “Photophysical behavior of a new cholesterol attached coumarin derivative and fluorescence spectroscopic studies on its interaction with bile salt systems and lipid bilayer membranes,” Physical Chemistry Chemical Physics, vol. 16, no. 3, pp. 1247, 2014. View at Publisher · View at Google Scholar
  • Sanne De Smet, Sophie Lingier, and Filip E. Du Prez, “MacroRAFT agents from renewable resources and their use as polymeric scaffolds in a grafting from approach,” Polymer Chemistry, vol. 5, no. 9, pp. 3163, 2014. View at Publisher · View at Google Scholar
  • Oihana Gordobil, Itziar Egüés, Rodrigo Llano-Ponte, and Jalel Labidi, “Physicochemical properties of PLA lignin blends,” Polymer Degradation and Stability, 2014. View at Publisher · View at Google Scholar
  • Matteo Gigli, Nadia Lotti, Massimo Gazzano, Valentina Siracusa, Lara Finelli, Andrea Munari, and Marco Dalla Rosa, “Biodegradable aliphatic copolyesters containing PEG-like sequences for sustainable food packaging applications,” Polymer Degradation and Stability, 2014. View at Publisher · View at Google Scholar
  • R. Gallego, S. Lopez-Quintana, F. Basurto, N. Villarreal, and J. C. Merino, “Synthesis of new compatibilizers to poly(lactic acid) blends,” Polymer Engineering and Science, vol. 54, no. 3, pp. 522–530, 2014. View at Publisher · View at Google Scholar
  • Jesmy Jose, Ghazaleh Pourfallah, Alcides Lopes Leao, and Suresh S Narine, “Influence of monomeric and polymeric structure on the physical properties of thermoplastic polyesters derived from hydroxy fatty acids,” Polymer International, 2014. View at Publisher · View at Google Scholar
  • Nurshamila Shaari Balakrishna, H. Ismail, and N. Othman, “Polypropylene/Rattan Powder/Kaolin Hybrid Composites: Processing, Mechanical and Thermal Properties,” Polymer-Plastics Technology and Engineering, vol. 53, no. 5, pp. 451–458, 2014. View at Publisher · View at Google Scholar
  • A.F. Koutsomitopoulou, J.C. Bénézet, A. Bergeret, and G.C. Papanicolaou, “Preparation and characterization of olive pit powder as a filler to PLA-matrix bio-composites,” Powder Technology, vol. 255, pp. 10–16, 2014. View at Publisher · View at Google Scholar
  • Giulia Giuntoli, Luca Rosi, Marco Frediani, Barbara Sacchi, Barbara Salvadori, Simone Porcinai, and Piero Frediani, “Novel coatings from renewable resources for the protection of bronzes,” Progress in Organic Coatings, 2014. View at Publisher · View at Google Scholar
  • T. Patricio, M. Domingos, A. Gloria, U. D'Amora, and J. F. Coelho, “Fabrication and characterisation of PCL and PCL/PLA scaffolds for tissue en gineering,” Rapid Prototyping Journal, vol. 20, no. 2, pp. 145–156, 2014. View at Publisher · View at Google Scholar
  • Saki Imabayashi, Kenji Komaguchi, Zhifang Tan, Yousuke Ooyama, and Yutaka Harima, “Synthesis and electrical properties of novel oligothiophenes partially cont aining 3,4-ethylenedioxythiophenes,” Rsc Advances, vol. 4, no. 5, pp. 2501–2508, 2014. View at Publisher · View at Google Scholar
  • Mohd Rasdan Ibrahim, Herda Yati Katman, Mohamed Rehan Karim, Suhana Koting, and Nuha S. Mashaan, “The Effect of Crumb Rubber Particle Size to the Optimum Binder Content for Open Graded Friction Course,” The Scientific World Journal, vol. 2014, pp. 1–8, 2014. View at Publisher · View at Google Scholar
  • Van Cuong Nguyen, and Quoc Hue Pho, “Preparation of Chitosan Coated Magnetic Hydroxyapatite Nanoparticles and Application for Adsorption of Reactive Blue 19 and Ni2+ Ions,” The Scientific World Journal, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Cha Ping Liau, Mansor Bin Ahmad, Kamyar Shameli, Wan Md Zin Wan Yunus, Nor Azowa Ibrahim, Norhazlin Zainuddin, and Yoon Yee Then, “Preparation and Characterization of Polyhydroxybutyrate/Polycaprolactone Nanocomposites,” The Scientific World Journal, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Simona Concilio, Valeria Bugatti, Heinz C. Neitzert, Giovanni Landi, Antonietta De Sio, Jürgen Parisi, Stefano Piotto, and Pio Iannelli, “Zn-complex based on oxadiazole/carbazole structure: synthesis, optical and electric properties,” Thin Solid Films, 2014. View at Publisher · View at Google Scholar
  • Lourdes Franco, Jordi Puiggalí, Marc Planellas, Matías Sacristán, Lorena Rey, Cristian Olmo, Joan Aymamí, María T. Casas, and Luis J. del Valle, “Micro-molding with ultrasonic vibration energy: new method to disperse nanoclays in polymer matrices,” Ultrasonics Sonochemistry, 2014. View at Publisher · View at Google Scholar
  • Cuicui Li, Stephany Y. Tzeng, Liane E. Tellier, and Jordan J. Green, “(3-Aminopropyl)-4-methylpiperazine End-capped Poly(1,4-butanediol diacrylate-co-4-amino-1-butanol)-based Multilayer Films for Gene Delivery,” ACS Applied Materials & Interfaces, pp. 130624104305001, 2013. View at Publisher · View at Google Scholar
  • Yan Han, Qiongyu Zeng, Haiyan Li, and Jiang Chang, “The calcium silicate/alginate composite: preparation and evaluation of its behavior as bioactive injectable hydrogels,” Acta Biomaterialia, 2013. View at Publisher · View at Google Scholar
  • Zm Shi Zhuming, Y Song Yu, F Lu Fang, Ty Zhou Tianyou, X Zhao Xin, Wk Zhang Wenke, and Zt Li Zhanting, “Evaluation on the Stability of the Intramolecular N-H center dot center dot center dot OMe Hydrogen Bonds of Aromatic Amide Foldamers,” Acta Chimica Sinica, vol. 71, no. 1, pp. 51–61, 2013. View at Publisher · View at Google Scholar
  • Sahadev A. Shankarappa, Julia M. Hickey, Jenny C. Dohlman, Brian P. Timko, Kathryn A. Whitehead, Jung-Jae Lee, Robert Langer, Daniel G. Anderson, and Daniel S. Kohane, “A Stiff Injectable Biodegradable Elastomer,” Advanced Functional Materials, vol. 23, no. 12, pp. 1527–1533, 2013. View at Publisher · View at Google Scholar
  • Davy-Louis Versace, Julien Ramier, Daniel Grande, Samir Abbad Andaloussi, Pierre Dubot, Nelly Hobeika, Jean-Pierre Malval, Jacques Lalevee, Estelle Renard, and Valerie Langlois, “Versatile Photochemical Surface Modification of Biopolyester Microfibrous Scaffolds with Photogenerated Silver Nanoparticles for Antibacterial Activity,” Advanced Healthcare Materials, vol. 2, no. 7, pp. 1008–1018, 2013. View at Publisher · View at Google Scholar
  • E. Bugnicourt, M. Schmid, O. Mc. Nerney, J. Wildner, L. Smykala, A. Lazzeri, and P. Cinelli, “Processing and Validation of Whey-Protein-Coated Films and Laminates at Semi-Industrial Scale as Novel Recyclable Food Packaging Materials with Excellent Barrier Properties,” Advances in Materials Science and Engineering, vol. 2013, pp. 1–10, 2013. View at Publisher · View at Google Scholar
  • Sushma Karra, Maogen Zhang, and Waldemar Gorski, “Electrochemistry and Current Control in Surface Films Based on Silica-Azure Redox Nanoparticles, Carbon Nanotubes, Enzymes, and Polyelectrolytes,” Analytical Chemistry, vol. 85, no. 2, pp. 1208–1214, 2013. View at Publisher · View at Google Scholar
  • A.E. Vasdekis, E.A. Scott, S. Roke, J.A. Hubbell, and D. Psaltis, “Vesicle Photonics,” Annual Review of Materials Research, vol. 43, no. 1, pp. 283–305, 2013. View at Publisher · View at Google Scholar
  • Xiaoqing Zhang, “Chemical Approaches in Processing Wheat Gluten-Based Polymer Materials,” Australian Journal of Chemistry, 2013. View at Publisher · View at Google Scholar
  • Yelin Deng, Wouter M.J. Achten, Karel Van Acker, and Joost R. Duflou, “Life cycle assessment of wheat gluten powder and derived packaging film,” Biofuels, Bioproducts and Biorefining, 2013. View at Publisher · View at Google Scholar
  • Mojtaba Binazadeh, Ali Faghihnejad, Larry D Unsworth, and Hongbo Zeng, “Understanding the Effect of Secondary Structure on Molecular Interactions of Poly-L-Lysine with Different Substrates by SFA,” Biomacromolecules, pp. 130916005713003, 2013. View at Publisher · View at Google Scholar
  • Anupama Shrivastav, Hae-Yeong Kim, and Young-Rok Kim, “Advances in the Applications of Polyhydroxyalkanoate Nanoparticles for Novel Drug Delivery System,” BioMed Research International, vol. 2013, pp. 1–12, 2013. View at Publisher · View at Google Scholar
  • Simon F. Williams, and Said Rizk, “Poly-4-hydroxybutyrate (P4HB): a new generation of resorbable medical devic es for tissue repair and regeneration,” Biomedical Engineering-Biomedizinische Technik, vol. 58, no. 5, pp. 439–452, 2013. View at Publisher · View at Google Scholar
  • Anastasia Koroleva, Olga Kufelt, Sabrina Schlie-Wolter, and Ulf Hinze, “Laser microstructured biodegradable scaffolds,” Biomedical Engineering-Biomedizinische Technik, vol. 58, no. 5, pp. 399–405, 2013. View at Publisher · View at Google Scholar
  • Tao Song, Andrey Pranovich, and Bjarne Holmbom, “Separation of polymeric galactoglucomannans from hot-water extract of spruce wood,” Bioresource Technology, vol. 130, pp. 198–203, 2013. View at Publisher · View at Google Scholar
  • Hadi Alphonse Goubran, Magdy El-Ekiaby, Mirjana Radosevic, Tim-Mo Chen, and Keng-Liang Ou, “Blood-derived biomaterials and platelet growth factors in regenerative medi cine,” Blood Reviews, vol. 27, no. 2, pp. 77–89, 2013. View at Publisher · View at Google Scholar
  • Se-Kook Park, Jae-Deok Jeon, Min-A Park, Ki Bong Lee, Chang-Soo Jin, and Kyoung-Hee Shin, “Poly(vinylbenzyl chloride-glycidyl methacrylate)/Polyethylene Composite Ani on Exchange Membranes for Vanadium Redox Battery Application,” Bulletin Of The Korean Chemical Society, vol. 34, no. 6, pp. 1651–1655, 2013. View at Publisher · View at Google Scholar
  • Ji Yang, Jie Chen, Dan Pan, Ying Wan, and Zheng Wang, “pH-sensitive interpenetrating network hydrogels based on chitosan derivatives and alginate for oral drug delivery,” Carbohydrate Polymers, vol. 92, no. 1, pp. 719–725, 2013. View at Publisher · View at Google Scholar
  • Sreejith Raveendran, Brahatheeswaran Dhandayuthapani, Yutaka Nagaoka, Yasuhiko Yoshida, Toru Maekawa, and D. Sakthi Kumar, “Biocompatible nanofibers based on extremophilic bacterial polysaccharide, Mauran from Halomonas maura,” Carbohydrate Polymers, vol. 92, no. 2, pp. 1225–1233, 2013. View at Publisher · View at Google Scholar
  • Suvendu Manna, Prosenjit Saha, Debasis Roy, Ramkrishna Sen, Basudam Adhikari, and Sancharini Das, “Enhanced biodegradation resistance of biomodified jute fibers,” Carbohydrate Polymers, vol. 93, no. 2, pp. 597–603, 2013. View at Publisher · View at Google Scholar
  • Romina J. Glisoni, María J. García-Fernández, Marylú Pino, Gabriel Gutkind, Albertina G. Moglioni, Carmen Alvarez-Lorenzo, Angel Concheiro, and Alejandro Sosnik, “β-Cyclodextrin hydrogels for the ocular release of antibacterial thiosemicarbazones,” Carbohydrate Polymers, vol. 93, no. 2, pp. 449–457, 2013. View at Publisher · View at Google Scholar
  • Marina Alekhina, Kirsi S. Mikkonen, Raimo Alén, Maija Tenkanen, and Herbert Sixta, “Carboxymethylation of alkali extracted xylan for preparation of bio-based packaging films,” Carbohydrate Polymers, 2013. View at Publisher · View at Google Scholar