About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [551 citations: 101–200 of 533 articles]

Articles published in International Journal of Polymer Science have been cited 551 times. The following is a list of the 533 articles that have cited the articles published in International Journal of Polymer Science.

  • Esmaeil Biazar, “Polyhydroxyalkanoates as Potential Biomaterials for Neural Tissue Regeneration,” International Journal of Polymeric Materials, vol. 63, no. 17, pp. 898–908, 2014. View at Publisher · View at Google Scholar
  • Joyce Cristina Cruz Santos, Alexandra A. P. Mansur, Virginia S. T. Ciminelli, and Herman S. Mansur, “Nanocomposites of Poly(Vinyl Alcohol)/Functionalized-Multiwall Carbon Nanotubes Conjugated With Glucose Oxidase for Potential Application as Scaffolds in Skin Wound Healing,” International Journal of Polymeric Materials and Polymeric Biomaterials, vol. 63, no. 4, pp. 185–196, 2014. View at Publisher · View at Google Scholar
  • Salah U. Hamim, and Raman P. Singh, “Effect of Hygrothermal Aging on the Mechanical Properties of Fluorinated and Nonfluorinated Clay-Epoxy Nanocomposites,” International Scholarly Research Notices, vol. 2014, pp. 1–13, 2014. View at Publisher · View at Google Scholar
  • Peyman Ezzati, Ismaeil Ghasemi, Mohammad Karrabi, Hamed Azizi, and Ivan Fortelny, “Preparation of porous PLLA/PCL blend by a combination of PEO phase and NaCl particulate leaching in PLLA/PCL/PEO/NaCl blend,” Iranian Polymer Journal, vol. 23, no. 10, pp. 757–766, 2014. View at Publisher · View at Google Scholar
  • Jingwen Liao, Ye Zhu, Zhaoyi Yin, Guoxin Tan, Chengyun Ning, and Chuanbin Mao, “Tuning nano-architectures and improving bioactivity of conducting polypyrrole coating on bone implants by incorporating bone-borne small molecules,” J. Mater. Chem. B, vol. 2, no. 45, pp. 7872–7876, 2014. View at Publisher · View at Google Scholar
  • Mingyue Zhang, Zhiqiang Cheng, Tianqi Zhao, Mengzhu Liu, Meijuan Hu, and Junfeng Li, “Synthesis, Characterization, and Swelling Behaviors of Salt-Sensitive Maize Bran–Poly(acrylic acid) Superabsorbent Hydrogel,” Journal of Agricultural and Food Chemistry, pp. 140821150125006, 2014. View at Publisher · View at Google Scholar
  • Andrea Undri, Luca Rosi, Marco Frediani, and Piero Frediani, “Conversion of poly(lactic acid) to lactide via microwave assisted pyrolysis,” Journal of Analytical and Applied Pyrolysis, 2014. View at Publisher · View at Google Scholar
  • Shinn-Gwo Hong, Heng-Wei Hsu, and Min-Tzung Ye, “Characterization and Use of Ultraviolet-Reactive Low-Molecular-Weight Polyhydroxybutyrate to Prepare Biodegradable Acrylates,” Journal of Applied Polymer Science, vol. 131, no. 3, 2014. View at Publisher · View at Google Scholar
  • Mun Fu Tse, “Adhesion of Maleic Anhydride Functionalized Polyolefins and Blends,” Journal of Applied Polymer Science, vol. 131, no. 3, 2014. View at Publisher · View at Google Scholar
  • Bijan Nasri-Nasrabadi, Tayebeh Behzad, and Rouhollah Bagheri, “Extraction and Characterization of Rice Straw Cellulose Nanofibers by an Optimized Chemomechanical Method,” Journal of Applied Polymer Science, vol. 131, no. 7, 2014. View at Publisher · View at Google Scholar
  • Fahmina Zafar, Hina Zafar, and Eram Sharmin, “Vegetable oil based polyurethanamide/organo-montmorillonite bio-nanocomposite,” Journal of Applied Polymer Science, 2014. View at Publisher · View at Google Scholar
  • S. Suganya, J. Venugopa, S. Ramakrishna, B. S. Lakshmi, and V. R. Giri Dev, “Aloe Vera/Silk Fibroin/Hydroxyapatite Incorporated Electrospun Nanofibrous Scaffold for Enhanced Osteogenesis,” Journal of Biomaterials and Tissue Engineering, vol. 4, no. 1, pp. 9–19, 2014. View at Publisher · View at Google Scholar
  • Simzar Hosseinzadeh, Masoud Soleimani, Sayed Mahdi Rezayat, Jafar Ai, and Mohammad Vasei, “The activation of satellite cells by nanofibrous poly epsilon-caprolacton constructs,” Journal of Biomaterials Applications, vol. 28, no. 6, pp. 801–812, 2014. View at Publisher · View at Google Scholar
  • Suganya Shanmugavel, Venugopal Jayarama Reddy, Seeram Ramakrishna, B. S. Lakshmi, and V. R. Giri Dev, “Precipitation of hydroxyapatite on electrospun polycaprolactone/aloe vera/silk fibroin nanofibrous scaffolds for bone tissue engineering,” Journal of Biomaterials Applications, vol. 29, no. 1, pp. 46–58, 2014. View at Publisher · View at Google Scholar
  • Anisa Mahomed, and Brian J. Tighe, “The design of contact lens based ocular drug delivery systems for single-day use: Part (I) Structural factors, surrogate ophthalmic dyes and passive diffusion studies,” Journal of Biomaterials Applications, vol. 29, no. 3, pp. 341–353, 2014. View at Publisher · View at Google Scholar
  • Gary Chinga-Carrasco, and Kristin Syverud, “Pretreatment-dependent surface chemistry of wood nanocellulose for pH-sensitive hydrogels,” Journal of Biomaterials Applications, vol. 29, no. 3, pp. 423–432, 2014. View at Publisher · View at Google Scholar
  • Joshua Minton, Cara Janney, Rosa Akbarzadeh, Carlie Focke, Aswati Subramanian, Tyler Smith, Joseph McKinney, Junyi Liu, James Schmitz, Paul F. James, and Azizeh-Mitra Yousefi, “Solvent-free polymer/bioceramic scaffolds for bone tissue engineering: fabrication, analysis, and cell growth,” Journal of Biomaterials Science, Polymer Edition, pp. 1–19, 2014. View at Publisher · View at Google Scholar
  • Marcin Lipowiecki, Markéta Ryvolová, Ákos Töttösi, Niels Kolmer, Sumsun Naher, Stephen A. Brennan, Mercedes Vázquez, and Dermot Brabazon, “Permeability of rapid prototyped artificial bone scaffold structures,” Journal of Biomedical Materials Research Part A, 2014. View at Publisher · View at Google Scholar
  • Hilal Unal Gulsuner, Nevin Atalay Gengec, Murat Kilinc, H. Yildirim Erbil, and Ayse B. Tekinay, “Osteoselection supported by phase separated polymer blend films,” Journal of Biomedical Materials Research Part A, 2014. View at Publisher · View at Google Scholar
  • Azizeh-Mitra Yousefi, Md Enamul Hoque, Rangabhatala G. S. V. Prasad, and Nicholas Uth, “Current strategies in multiphasic scaffold design for osteochondral tissue engineering: A review,” Journal of Biomedical Materials Research Part A, 2014. View at Publisher · View at Google Scholar
  • Rosa Akbarzadeh, and Azizeh-Mitra Yousefi, “Effects of processing parameters in thermally induced phase separation technique on porous architecture of scaffolds for bone tissue engineering,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2014. View at Publisher · View at Google Scholar
  • Deniz Ozdil, and Halil Murat Aydin, “Polymers for medical and tissue engineering applications,” Journal of Chemical Technology & Biotechnology, 2014. View at Publisher · View at Google Scholar
  • Fayang Jin, Rui Liu, Wanfen Pu, and Cailin Wen, “Preparation and Properties of Polymer/Vermiculite Hybrid Superabsorbent Reinforced by Fiber for Enhanced Oil Recovery,” Journal of Chemistry, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Faris M. AL-Oqla, and S.M. Sapuan, “Natural fiber reinforced polymer composites in industrial applications: feasibility of date palm fibers for sustainable automotive industry,” Journal of Cleaner Production, vol. 66, pp. 347–354, 2014. View at Publisher · View at Google Scholar
  • Xinsheng Yang, Hern Kim, Liqin Yang, and Cuihua Cheng, “Composite varistors based on epoxy resin/La0.8Sr0.2MnO3,” Journal of Composite Materials, vol. 48, no. 6, pp. 677–681, 2014. View at Publisher · View at Google Scholar
  • Pravuram Panda, Gopa Mishra, Sisir Mantry, Saroj Kumar Singh, and Swami Prasad Sinha, “A study on mechanical, thermal, and electrical properties of glass fiber-reinforced epoxy hybrid composites filled with plasma-synthesized AlN,” Journal of Composite Materials, vol. 48, no. 25, pp. 3073–3082, 2014. View at Publisher · View at Google Scholar
  • Soumen Jana, Robert D. Simari, Daniel B. Spoon, and Amir Lerman, “Drug delivery in aortic valve tissue engineering,” Journal of Controlled Release, 2014. View at Publisher · View at Google Scholar
  • M. Schmid, B. Krimmel, U. Grupa, and K. Noller, “Effects of thermally induced denaturation on technological-functional properties of whey protein isolate-based films,” Journal of Dairy Science, 2014. View at Publisher · View at Google Scholar
  • Anita Mekap, Piyush R. Das, and R. N. P. Choudhary, “Dielectric and Impedance Spectroscopy of ZnWO4 Electroceramics,” Journal of Electronic Materials, vol. 43, no. 9, pp. 3527–3533, 2014. View at Publisher · View at Google Scholar
  • Mei Yang, Jingcheng Hao, and Hongguang Li, “Syntheses and Aggregation Behavior of Pyridine-Based CH-CF Hybrid Surfactants,” Journal of Fluorine Chemistry, 2014. View at Publisher · View at Google Scholar
  • Akihiro Hideno, Kentaro Abe, and Hiroyuki Yano, “Preparation using Pectinase and Characterization of Nanofibers from Orange Peel Waste in Juice Factories,” Journal of Food Science, 2014. View at Publisher · View at Google Scholar
  • Zhengyu Jin, Hui Gong, and Kaijun Wang, “Application of hybrid coagulation microfiltration with air backflushing to direct sewage concentration for organic matter recovery,” Journal of Hazardous Materials, 2014. View at Publisher · View at Google Scholar
  • Mukesh K. Pandey, Abhishek Kumar, Sethu Ravichandran, Virinder S. Parmar, Arthur C. Watterson, and Jayant Kumar, “Chemo-enzymatic Synthesis of Polydimethylsiloxane Curcumin Copolymer for Detection of Nitro-aromatics,” Journal of Macromolecular Science Part A-Pure and Applied Chemistry, vol. 51, no. 5, pp. 399–404, 2014. View at Publisher · View at Google Scholar
  • Yifeng Hong, Jack G. Zhou, and Donggang Yao, “Porogen Templating Processes: An Overview,” Journal of Manufacturing Science and Engineering-Transactions of The Asme, vol. 136, no. 3, 2014. View at Publisher · View at Google Scholar
  • Takahiro Tokunaga, Miki Shoiriki, Tomonobu Mizumo, and Yoshiro Kaneko, “Preparation of low-crystalline POSS containing two types of alkylammonium groups and its optically transparent film,” Journal of Materials Chemistry C, vol. 2, no. 14, pp. 2496–2501, 2014. View at Publisher · View at Google Scholar
  • Irina Alexandra Paun, Marian Zamfirescu, Mona Mihailescu, Catalin Romeo Luculescu, Cosmin Catalin Mustaciosu, Ion Dorobantu, Bogdan Calenic, and Maria Dinescu, “Laser micro-patterning of biodegradable polymer blends for tissue engineering,” Journal of Materials Science, 2014. View at Publisher · View at Google Scholar
  • K. Prabakaran, S. Mohanty, and S. K. Nayak, “Influence of surface modified TiO2 nanoparticles on dielectric properties of PVdF–HFP nanocomposites,” Journal of Materials Science: Materials in Electronics, 2014. View at Publisher · View at Google Scholar
  • Iu. Bykova, V. Weinhardt, A. Kashkarova, S. Lebedev, T. Baumbach, V. Pichugin, K. Zaitsev, and I. Khlusov, “Physical properties and biocompatibility of UHMWPE-derived materials modified by synchrotron radiation,” Journal of Materials Science: Materials in Medicine, 2014. View at Publisher · View at Google Scholar
  • Alisa Katsen-Globa, Ina Meiser, Yuriy A. Petrenko, Roman V. Ivanov, Vladimir I. Lozinsky, Heiko Zimmermann, and Alexander Yu. Petrenko, “Towards ready-to-use 3-D scaffolds for regenerative medicine: adhesion-based cryopreservation of human mesenchymal stem cells attached and spread within alginate-gelatin cryogel scaffolds,” Journal of Materials Science-Materials in Medicine, vol. 25, no. 3, pp. 857–871, 2014. View at Publisher · View at Google Scholar
  • Hong Li, Lili Yang, Xieping Dong, Yifei Gu, Guoyu Lv, and Yonggang Yan, “Composite scaffolds of nano calcium deficient hydroxyapatite/multi-(amino acid) copolymer for bone tissue regeneration,” Journal of Materials Science-Materials in Medicine, vol. 25, no. 5, pp. 1257–1265, 2014. View at Publisher · View at Google Scholar
  • Michael J. Whitcombe, Nicole Kirsch, and Ian A. Nicholls, “Molecular imprinting science and technology: a survey of the literature for the years 2004-2011,” Journal of Molecular Recognition, vol. 27, no. 6, pp. 297–401, 2014. View at Publisher · View at Google Scholar
  • Alaa Ali, Kamal Yusoh, and S. F. Hasany, “Synthesis and Physicochemical Behaviour of Polyurethane-Multiwalled Carbon Nanotubes Nanocomposites Based on Renewable Castor Oil Polyols,” Journal of Nanomaterials, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Shima Tavakol, Mohammad Reza Nikpour, Elham Hoveizi, Behnaz Tavakol, Seyed Mahdi Rezayat, Mahdi Adabi, Sahebeh Shajari Abokheili, and Mohsen Jahanshahi, “Investigating the effects of particle size and chemical structure on cytotoxicity and bacteriostatic potential of nano hydroxyapatite/chitosan/silica and nano hydroxyapatite/chitosan/silver; as antibacterial bone substitutes,” Journal of Nanoparticle Research, vol. 16, no. 10, 2014. View at Publisher · View at Google Scholar
  • Ankush A. Gokhale, “Recent Advances in the Fabrication of Nanostructured Barrier Films,” Journal of Nanoscience and Nanotechnology, vol. 14, no. 3, pp. 2157–2177, 2014. View at Publisher · View at Google Scholar
  • Phl Phuong Ha-Lien Tran, and Tv Toi Van Vo, “Polymer Conjugate-Based Nanomaterials for Drug Delivery,” Journal of Nanoscience and Nanotechnology, vol. 14, no. 1, pp. 815–827, 2014. View at Publisher · View at Google Scholar
  • Vuyiswa J. Mkhabela, and Suprakas Sinha Ray, “Poly(epsilon-caprolactone) Nanocomposite Scaffolds for Tissue Engineering: A Brief Overview,” Journal of Nanoscience and Nanotechnology, vol. 14, no. 1, pp. 535–545, 2014. View at Publisher · View at Google Scholar
  • Liliana Polo-Corrales, and Magda Latorre-Esteves, “Scaffold Design for Bone Regeneration,” Journal of Nanoscience and Nanotechnology, vol. 14, no. 1, pp. 15–56, 2014. View at Publisher · View at Google Scholar
  • Matthew Mata, Carlos J. Garcia-Cervera, and Hector D. Ceniceros, “Ordering kinetics of a conserved binary mixture with a nematic liquid crystal component,” Journal of Non-Newtonian Fluid Mechanics, vol. 212, pp. 18–27, 2014. View at Publisher · View at Google Scholar
  • Ahmad Oryan, Soodeh Alidadi, Ali Moshiri, and Nicola Maffulli, “Bone regenerative medicine: classic options, novel strategies, and future directions,” Journal of Orthopaedic Surgery and Research, vol. 9, 2014. View at Publisher · View at Google Scholar
  • Markus Andre, Boris Kühl, Gerald Brenner-Weiss, Christoph Syldatk, and Jens Rudat, “Cationic heterooligopeptides by ficain-catalyzed co-oligomerization of lysine and methionine ethylesters,” Journal of Peptide Science, 2014. View at Publisher · View at Google Scholar
  • Tian-Xiang Xiang, and Bradley D. Anderson, “ Water Uptake, Distribution, and Mobility in Amorphous Poly( d , l -Lactide) by Molecular Dynamics Simulation ,” Journal of Pharmaceutical Sciences, 2014. View at Publisher · View at Google Scholar
  • Eduardo Aluicio-Sarduy, Aliaksandr Baidak, Georgios C. Vougioukalakis, and Panagiotis E. Keivanidis, “Phosphorimetric Characterization of Solution-Processed Polymeric Oxygen Barriers for the Encapsulation of Organic Electronics,” Journal of Physical Chemistry C, vol. 118, no. 5, pp. 2361–2369, 2014. View at Publisher · View at Google Scholar
  • Parahat Atayev, and Mualla Oner, “Effect of incorporation of clay and zinc oxide nanoparticles on oxygen barrier properties of polypropylene sheet,” Journal of Plastic Film & Sheeting, vol. 30, no. 3, pp. 248–265, 2014. View at Publisher · View at Google Scholar
  • Turup P. Mohan, and Krishnan Kanny, “Mechanical and barrier properties of copolyester-nanoclay composites,” Journal of Polymer Engineering, vol. 34, no. 6, pp. 511–520, 2014. View at Publisher · View at Google Scholar
  • Qing-Bo Wei, Feng Fu, Yu-Qi Zhang, and Long Tang, “Preparation, characterization, and antibacterial properties of pH-responsive P(MMA-co-MAA)/silver nanocomposite hydrogels,” Journal of Polymer Research, vol. 21, no. 2, 2014. View at Publisher · View at Google Scholar
  • Jessica L. Nichol, Nicole L. Morozowich, Thomas E. Decker, and Harry R. Allcock, “Crosslinkable citronellol containing polyphosphazenes and their biomedical potential,” Journal of Polymer Science Part A: Polymer Chemistry, 2014. View at Publisher · View at Google Scholar
  • Subhas C. Shit, and Pathik M. Shah, “Edible Polymers: Challenges and Opportunities,” Journal of Polymers, vol. 2014, pp. 1–13, 2014. View at Publisher · View at Google Scholar
  • Tuğba Toraman, and Baki Hazer, “Synthesis and Characterization of the Novel Thermoresponsive Conjugates Based on Poly(3-hydroxy alkanoates),” Journal of Polymers and the Environment, 2014. View at Publisher · View at Google Scholar
  • Pablo Jiménez-Bonilla, Jessica Salas-Arias, Marianelly Esquivel, and Jose Roberto Vega-Baudrit, “Optimization of Microwave-Assisted and Conventional Heating Comparative Synthesis of Poly(lactic acid) by Direct Melt Polycondensation from Agroindustrial Banana (Musa AAA Cavendish) and Pineapple (Ananas comosus) Fermented Wastes,” Journal of Polymers and the Environment, 2014. View at Publisher · View at Google Scholar
  • Jens Vandewijngaarden, Marius Murariu, Philippe Dubois, Robert Carleer, Jan Yperman, Peter Adriaensens, Sonja Schreurs, Nadia Lepot, Roos Peeters, and Mieke Buntinx, “Gas Permeability Properties of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate),” Journal of Polymers and the Environment, 2014. View at Publisher · View at Google Scholar
  • Adedayo Fashina, Edith Antunes, and Tebello Nyokong, “A comparative photophysicochemical study of mono substituted phthalocyanines grafted onto silica nanoparticles,” Journal of Porphyrins and Phthalocyanines, vol. 18, no. 5, pp. 396–405, 2014. View at Publisher · View at Google Scholar
  • Brent Tisserat, Louis Reifschneider, David Grewell, and Gowrishanker Srinivasan, “Effect of particle size, coupling agent and DDGS additions on Paulownia wood polypropylene composites,” Journal of Reinforced Plastics and Composites, vol. 33, no. 14, pp. 1279–1293, 2014. View at Publisher · View at Google Scholar
  • D. Puglia, R. Petrucci, E. Fortunati, F. Luzi, J.M. Kenny, and L. Torre, “Revalorisation of Posidonia Oceanica as Reinforcement in Polyethylene/Maleic Anhydride Grafted Polyethylene Composites,” Journal of Renewable Materials, vol. 2, no. 1, pp. 66–76, 2014. View at Publisher · View at Google Scholar
  • Natalia O. Gegel, Anna B. Shipovskaya, Luba S. Vdovykh, and Tatiana S. Babicheva, “Preparation and Properties of 3D Chitosan Microtubes,” Journal of Soft Matter, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Kazuki Yamamoto, Joji Ohshita, Tomonobu Mizumo, and Toshinori Tsuru, “Polymerization behavior and gel properties of ethane, ethylene and acetylene-bridged polysilsesquioxanes,” Journal of Sol-Gel Science and Technology, vol. 71, no. 1, pp. 24–30, 2014. View at Publisher · View at Google Scholar
  • R. Simón-Allué, P. Pérez-López, S. Sotomayor, E. Peña, G. Pascual, J.M. Bellón, and B. Calvo, “Short- and long-term biomechanical and morphological study of new suture types in abdominal wall closure,” Journal of the Mechanical Behavior of Biomedical Materials, 2014. View at Publisher · View at Google Scholar
  • Thunyaluck Phupoksakul, Manusawee Leuangsukrerk, Pidsawat Numpiboonmarn, Anongnat Somwangthanaroj, and Theeranun Janjarasskul, “Properties of poly(lactide)-whey protein isolate laminated films,” Journal of the Science of Food and Agriculture, 2014. View at Publisher · View at Google Scholar
  • Aniket Vyas, and Jude O. Iroh, “Thermal behavior and structure of clay/nylon-6 nanocomposite synthesized by in situ solution polymerization,” Journal of Thermal Analysis and Calorimetry, 2014. View at Publisher · View at Google Scholar
  • A.G. Supri, S.J. Tan, H. Ismail, and P.L. Teh, “Properties of (Low-density polyethylene)/(natural rubber)/(water hyacinth fiber) composites: The effect of polyaniline,” Journal of Vinyl and Additive Technology, 2014. View at Publisher · View at Google Scholar
  • Marisa Erencia, Francisco Cano, Jose A. Tornero, Jorge Macanás, and Fernando Carrillo, “Resolving the Electrospinnability Zones and Diameter Prediction for the Electrospinning of the Gelatin/Water/Acetic Acid System,” Langmuir, pp. 140611094918000, 2014. View at Publisher · View at Google Scholar
  • Laura Martins Fonseca, Júlia Rosa Gonçalves, Shanise Lisie Mello El Halal, Vânia Zanella Pinto, Alvaro Renato Guerra Dias, Andressa Carolina Jacques, and Elessandra da Rosa Zavareze, “Oxidation of potato starch with different sodium hypochlorite concentrations and its effect on biodegradable films,” LWT - Food Science and Technology, 2014. View at Publisher · View at Google Scholar
  • Nathalie Bock, Maria A. Woodruff, Roland Steck, Dietmar W. Hutmacher, Brooke L. Farrugia, and Tim R. Dargaville, “Enzymatic Synthesis of Amylose Brushes Revisited: Details from X-Ray Photoelectron Spectroscopy and Spectroscopic Ellipsometry,” Macromolecular Bioscience, vol. 14, no. 2, pp. 202–214, 2014. View at Publisher · View at Google Scholar
  • Giuliana Gorrasi, Roberto Pantani, Marius Murariu, and Philippe Dubois, “PLA/Halloysite Nanocomposite Films: Water Vapor Barrier Properties and Specific Key Characteristics,” Macromolecular Materials and Engineering, vol. 299, no. 1, pp. 104–115, 2014. View at Publisher · View at Google Scholar
  • Andrzej K. Bledzki, Hans-Peter Fink, and Mohini Sain, “Progress Report on Natural Fiber Reinforced Composites,” Macromolecular Materials and Engineering, vol. 299, no. 1, pp. 9–26, 2014. View at Publisher · View at Google Scholar
  • Stephen C. Agwuncha, Suprakas Sinha Ray, Jarugala Jayaramudu, Caroline Khoathane, and Rotimi Sadiku, “Influence of Boehmite Nanoparticle Loading on the Mechanical, Thermal, and Rheological Properties of Biodegradable Polylactide/Poly(ϵ-caprolactone) Blends,” Macromolecular Materials and Engineering, 2014. View at Publisher · View at Google Scholar
  • Ramesh Subbiah, Ping Du, Mintai Peter Hwang, In Gul Kim, Se Young Van, Yong Kwan Noh, Hansoo Park, and Kwideok Park, “Dual growth factor-loaded core-shell polymer microcapsules can promote osteogenesis and angiogenesis,” Macromolecular Research, 2014. View at Publisher · View at Google Scholar
  • Avik Sarker, Nguyen Thuy Ba Linh, Hae Il Jung, Hyun Seok Seo, and Byong Taek Lee, “Fabrication of recombinant human bone morphogenetic protein-2 coated porous biphasic calcium phosphate-sodium carboxymethylcellulose-gelatin scaffold and its In vitro evaluation,” Macromolecular Research, 2014. View at Publisher · View at Google Scholar
  • Babak Samiey, Chil-Hung Cheng, and Jiangning Wu, “Organic-Inorganic Hybrid Polymers as Adsorbents for Removal of Heavy Metal Ions from Solutions: A Review,” Materials, vol. 7, no. 2, pp. 673–726, 2014. View at Publisher · View at Google Scholar
  • Elena Părpăriţă, Raluca Nicoleta Darie, Carmen-Mihaela Popescu, Md. Azhar Uddin, and Cornelia Vasile, “Structure–morphology–mechanical properties relationship of some polypropylene/lignocellulosic composites,” Materials & Design, vol. 56, pp. 763–772, 2014. View at Publisher · View at Google Scholar
  • M. Mandhakini, A. Chandramohan, K. Jayanthi, and M. Alagar, “Carbon black reinforced C8 ether linked bismaleimide toughened electrically conducting epoxy nanocomposites,” Materials & Design, vol. 64, pp. 706–713, 2014. View at Publisher · View at Google Scholar
  • Fatima Eddoumy, Haytam Kasem, Houcine Dhieb, Josephus Gerardus Buijnsters, Philippe Dufrenoy, Jean-Pierre Celis, and Yannick Desplanques, “Role of constituents of friction materials on their sliding behavior between room temperature and 400 °C,” Materials & Design, 2014. View at Publisher · View at Google Scholar
  • Bent Mueller, Dietmar Koch, Rainer Lutz, Karl A. Schlegel, Laura Treccani, and Kurosch Rezwan, “A novel one-pot process for near-net-shape fabrication of open-porous resorbable hydroxyapatite/protein composites and in vivo assessment,” Materials Science & Engineering C-Materials for Biological Applications, vol. 42, pp. 137–145, 2014. View at Publisher · View at Google Scholar
  • Carolina P. Ollé Resa, Rosa J. Jagus, and Lía N. Gerschenson, “Effect of natamycin, nisin and glycerol on the physicochemical properties, roughness and hydrophobicity of tapioca starch edible films,” Materials Science and Engineering: C, 2014. View at Publisher · View at Google Scholar
  • Bahman Torabinejad, Jamshid Mohammadi-Rovshandeh, Seyed Mohammad Davachi, and Ali Zamanian, “Synthesis and characterization of nanocomposite scaffolds based on triblock copolymer of L-lactide, ε-caprolactone and nano-hydroxyapatite for bone tissue engineering,” Materials Science and Engineering: C, 2014. View at Publisher · View at Google Scholar
  • A. Díaz, L. del Valle, L. Franco, J.R. Sarasua, F. Estrany, and J. Puiggalí, “Anhydric maleic functionalization and polyethylene glycol grafting of lactide-co-trimethylene carbonate copolymers,” Materials Science and Engineering: C, 2014. View at Publisher · View at Google Scholar
  • Ana Gantar, Lucilia P. da Silva, Joaquim M. Oliveira, Alexandra P. Marques, Vitor M. Correlo, Saša Novak, and Rui L. Reis, “Nanoparticulate Bioactive-Glass-Reinforced Gellan-Gum Hydrogels for Bone-Tissue Engineering,” Materials Science and Engineering: C, 2014. View at Publisher · View at Google Scholar
  • M. Hoyer, N. Drechsel, M. Meyer, C. Meier, C. Hinüber, A. Breier, J. Hahner, G. Heinrich, C. Rentsch, L.-A. Garbe, W. Ertel, G. Schulze-Tanzil, and A. Lohan, “Embroidered polymer-collagen hybrid scaffold variants for ligament tissue engineering,” Materials Science and Engineering: C, 2014. View at Publisher · View at Google Scholar
  • Muhammet Samet Kilic, Seyda Korkut, and Baki Hazer, “A novel poly(propylene-co-imidazole) based biofuel cell: System optimization and operation for energy generation,” Materials Science and Engineering: C, 2014. View at Publisher · View at Google Scholar
  • N. Sakthivel, R. Socrates, G.M. Shanthini, A. Rajaram, and S. Narayana Kalkura, “Silver ions impregnated composite biomaterial optimally prepared using zeta potential measurements,” Materials Science and Engineering: C, 2014. View at Publisher · View at Google Scholar
  • X. H. Hu, H. P. Tan, D. Li, and M. Y. Gu, “Surface functionalisation of contact lenses by CS/HA multilayer film to improve its properties and deliver drugs,” Materials Technology, vol. 29, no. 1, pp. 8–13, 2014. View at Publisher · View at Google Scholar
  • A. Komuraiah, N. Shyam Kumar, and B. Durga Prasad, “Chemical Composition of Natural Fibers and its Influence on their Mechanical Properties,” Mechanics of Composite Materials, vol. 50, no. 3, pp. 359–376, 2014. View at Publisher · View at Google Scholar
  • Mingshu Zhou, and Dong Yu, “Cartilage tissue engineering using PHBV and PHBV/Bioglass scaffolds,” Molecular Medicine Reports, vol. 10, no. 1, pp. 508–514, 2014. View at Publisher · View at Google Scholar
  • Manisha Pandey, Najwa Mohamad, and Mohd Cairul Iqbal Mohd Amin, “Bacterial cellulose/acrylamide pH-sensitive smart hydrogel: Development, characterization and toxicity studies in ICR mice model,” Molecular Pharmaceutics, pp. 140826131719002, 2014. View at Publisher · View at Google Scholar
  • Cyrus Weijie Beh, Deng Pan, Jason Lee, Xuan Jiang, Kelvin J. Liu, Hai-Quan Mao, and Tza-Huei Wang, “Direct Interrogation of DNA Content Distribution in Nanoparticles by a Novel Microfluidics-based Single-Particle Analysis,” Nano Letters, pp. 140723095550007, 2014. View at Publisher · View at Google Scholar
  • D. Cody, E. Mihaylova, L. O’Neill, T. Babeva, H. Awala, R. Retoux, S. Mintova, and I. Naydenova, “Effect of zeolite nanoparticles on the optical properties of diacetone acrylamide-based photopolymer,” Optical Materials, 2014. View at Publisher · View at Google Scholar
  • Szabolcs Beke, Balazs Farkas, Ilaria Romano, and Fernando Brandi, “3D scaffold fabrication by mask projection excimer laser stereolithography,” Optical Materials Express, vol. 4, no. 10, pp. 2032–2041, 2014. View at Publisher · View at Google Scholar
  • Hariyadi Soetedjo, and Jukka Räty, “Use of a modified Drude's equation to investigate the optical rotation property of sugars,” Optik - International Journal for Light and Electron Optics, 2014. View at Publisher · View at Google Scholar
  • Hisayuki Endo, Nobuhiro Takeda, and Masafumi Unno, “Synthesis and Properties of Phenylsilsesquioxanes with Ladder and Double-Decker Structures,” Organometallics, vol. 33, no. 15, pp. 4148–4151, 2014. View at Publisher · View at Google Scholar
  • Markus Schmid, Sven Sängerlaub, Laura Wege, and Andreas Stäbler, “Properties of Transglutaminase Crosslinked Whey Protein Isolate Coatings and Cast Films,” Packaging Technology and Science, 2014. View at Publisher · View at Google Scholar
  • H. Surya Prakash Rao, Avinash Desai, Ivy Sarkar, Monalisa Mohapatra, and Ashok Kumar Mishra, “Photophysical behavior of a new cholesterol attached coumarin derivative and fluorescence spectroscopic studies on its interaction with bile salt systems and lipid bilayer membranes,” Physical Chemistry Chemical Physics, vol. 16, no. 3, pp. 1247, 2014. View at Publisher · View at Google Scholar