About this Journal Submit a Manuscript Table of Contents
International Journal of Rotating Machinery
Volume 6 (2000), Issue 4, Pages 235-244
http://dx.doi.org/10.1155/S1023621X00000221

Stresses in Composite Shafts Subjected to Unbalance Excitation and Transmitted Torque

Mechanical Engineering Department, Indian Institute of Technology, Hauz Khas, New Delhi 110016, India

Received 24 April 1998; Revised 14 August 1998

Copyright © 2000 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

In the present study, stress analysis of fiber reinforced thin composite shafts subjected to unbalance excitation and steady torque, is carried out. Shafts of uniform as well as variable wall thickness are considered. The shaft is modeled as a simply supported Timoshenko beam in which shear deformation, rotary inertia and gyroscopic effects have been included. Modified equivalent modulus beam theory has been adopted. Rayleigh-Ritz displacements are used for deriving the solution equations. Shafts with a uniform wall thickness, and with variable wall thickness in which the thickness is varied along the axial length of the shaft for three different cases of fiber angles have been studied. Axial variation of stresses is studied in detail. Results obtained indicate that the stresses in the variable wall thickness are smaller than the one with uniform wall thickness, even for the same weight of the shaft.