International Journal of Rotating Machinery
Volume 2009 (2009), Article ID 936251, 9 pages
doi:10.1155/2009/936251
Research Article

Systems Design, Fabrication, and Testing of a High-Speed Miniature Motor for Cryogenic Cooler

Dipjyoti Acharya,1 Lei Zhou,1 Liping Zheng,1 Thomas X. Wu,1 Jay Kapat,1 Louis Chow,1 and Nagaraj K. Arakere2

1Department of Mechanical, Materials, and Aerospace Engineering, University of Central Florida, 4000 Central Florida Blvd, Orlando, FL 32816, USA
2Mechanical & Aerospace Engineering, University of Florida, Gainesville, FL 32611, USA

Received 13 June 2009; Revised 20 September 2009; Accepted 12 October 2009

Academic Editor: Yasutomo Kaneko

Copyright © 2009 Dipjyoti Acharya et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Dipjyoti Acharya, Lei Zhou, Liping Zheng, et al., “Systems Design, Fabrication, and Testing of a High-Speed Miniature Motor for Cryogenic Cooler,” International Journal of Rotating Machinery, vol. 2009, Article ID 936251, 9 pages, 2009. doi:10.1155/2009/936251