Table of Contents for Year 2010 [9 articles]

• Model Reduction Methods for Rotor Dynamic Analysis: A Survey and Review, Matthew B. Wagner, Amir Younan, Paul Allaire, and Randy Cogill
  Volume 2010 (2010), Article ID 273716, 17 pages
• Influence of Thermodynamic Effect on Blade Load in a Cavitating Inducer, Kengo Kikuta, Noriyuki Shimiya, Tomoyuki Hashimoto, Mitsuru Shimagaki, Hideaki Nanri, and Yoshiki Yoshida
  Volume 2010 (2010), Article ID 302360, 7 pages
• Analysis of Acoustic Cavitation Surge in a Rocket Engine Turbopump, Hideaki Nanri, Hiroki Kannan, Naoki Tani, and Yoshiki Yoshida
  Volume 2010 (2010), Article ID 717013, 8 pages
• Numerical Investigation of Velocity Flow Field inside an Impeller Air Model of a Centrifugal Pump with Vaned Diffuser Interactions and Comparison with PIV Measurements, Abdelmadjid Atif, Saad Benmansour, and Gerard Bois
  Volume 2010 (2010), Article ID 706043, 12 pages
• Effects of the Hot Alignment of a Power Unit on Oil-Whip Instability Phenomena, A. Vania and P. Pennacchi
  Volume 2010 (2010), Article ID 385947, 12 pages
• Condition Monitoring of Forward Curved Centrifugal Blower Using Coast Down Time Analysis, G. R. Rameshkumar, B. V. A. Rao, and K. P. Ramachandran
  Volume 2010 (2010), Article ID 962804, 12 pages
• Gear Fault Detection Based on Teager-Huang Transform, Hui Li, Haiqi Zheng, and Liwei Tang
  Volume 2010 (2010), Article ID 502064, 9 pages
• Study of Sweep and Induced Dihedral Effects in Subsonic Axial Flow Compressor Passages—Part II: Detailed Study of the Effects on Tip Leakage Phenomena, P. V. Ramakrishna and M. Govardhan
  Volume 2010 (2010), Article ID 491413, 13 pages
• Approximated Stiffness Coefficients in Rotor Systems Supported by Bearings with Clearance, Magnus Karlberg
  Volume 2010 (2010), Article ID 540101, 5 pages