Volume 1 [21 articles]
All | 1-10 | 11-20 | 21-21
- Editorial, Wen-Jei Yang
Volume 1 (1994), Issue 1, Pages i-i - Aspect Ratio Effect on Convective Heat Transfer of Radially Outward Flow in
Rotating Rectangular Ducts, C. R. Kuo and G. J. Hwang
Volume 1 (1994), Issue 1, Pages 1-18 - On the Development of Two-Dimensional Wakes within Curved
Channels: Experimental and Theoretical Investigation, M. T. Schobeiri, K. Pappu, and J. John
Volume 1 (1994), Issue 1, Pages 19-35 - Flow-Excited Turbine Rotor Instability, Andrew D. Dimarogonas and Julio C. Gomez-Mancilla
Volume 1 (1994), Issue 1, Pages 37-51 - Case Study of Pump Failure Due to Rotor-Stator Interaction, Hideo Ohashi
Volume 1 (1994), Issue 1, Pages 53-60 - Comparison of Different Actuator Concepts for
Applications in Rotating Machinery, Heinz Ulbrich
Volume 1 (1994), Issue 1, Pages 61-71 - Film Cooling Effectiveness Data for Simple Injection
Geometries: A Collection of Three-Axis Plots, L. D. Stone and R. J. Goldstein
Volume 1 (1994), Issue 1, Pages 73-81 - Modal Testing of Rotors with Fluid Interaction, Agnes Muszynska
Volume 1 (1995), Issue 2, Pages 83-116 - Brush Seal Performance and Durability Issues Based
on T-700 Engine Test Results, R. C. Hendricks
Volume 1 (1995), Issue 2, Pages 117-128 - Influence of Rotation on Heat Transfer from a Two-Pass Channel with Periodically
Placed Turbulence and Secondary Flow Promoters, S. Dutta, J.-C. Han, and Y.-M. Zhang
Volume 1 (1995), Issue 2, Pages 129-144 - Evaluation of Seal Effects on the Stability
of Rotating Fluid Machinery, T. Iwatsubo and B. C. Sheng
Volume 1 (1995), Issue 2, Pages 145-152 - Interactive Development of Seals, Bearings, and
Secondary Flow Systems with the Power Stream, R. C. Hendricks, B. M. Steinetz, M. M. Athavale, A. J. Przekwas, M. J. Braun, M. I. Dozozo, F. K. Choy, V. V. Kudriavtsev, R. L. Mullen, and G. L. Von Pragenau
Volume 1 (1995), Issue 3-4, Pages 153-185 - The Effect of Surface Roughness of a Body in the High
Reynolds Number Flow, Tsutomu Adachi
Volume 1 (1995), Issue 3-4, Pages 187-197 - Laser Velocimetry Measurements in a Double Volute Centrifugal Pump, William De Ojeda, Ronald D. Flack, and Steven M. Miner
Volume 1 (1995), Issue 3-4, Pages 199-214 - Convex Curvature Effect on the Wake
Including Recovery from the Curvature, S. M. You
Volume 1 (1995), Issue 3-4, Pages 215-224 - Effects of Hydrostatic Pocket Shape on the Flow
Pattern and Pressure Distribution, M. J. Braun and M. Dzodzo
Volume 1 (1995), Issue 3-4, Pages 225-235 - Vibrational Diagnostics of Rotating Machinery
Malfunctions, Agnes Muszynska
Volume 1 (1995), Issue 3-4, Pages 237-266 - Identification Procedures as Tools for Fault Diagnosis
of Rotating Machinery, Susanne Seibold and Claus-Peter Fritzen
Volume 1 (1995), Issue 3-4, Pages 267-275 - Analysis of Vibration Characteristics for a Rotor-Bearing System Using Distributed
Spring and Damper Model, D. C. Han, S. H. Choi, and Y. H. Lee
Volume 1 (1995), Issue 3-4, Pages 277-284 - Rotordynamic Coefficients of Long Staggered
Labyrinth Gas Seals, K. Kwanka and W. Ortinger
Volume 1 (1995), Issue 3-4, Pages 285-291 - Modelling Turbine Vibration in Terms
if its Load Variation, T. J. Chalko and D. X. Li
Volume 1 (1995), Issue 3-4, Pages 293-299