Volume 2005 [29 articles]

• Effects of Low Reynolds Number on Wake-Generated Unsteady Flow of an Axial-Flow Turbine Rotor, Takayuki Matsunuma and Yasukata Tsutsui
  Volume 2005 (2005), Issue 1, Pages 1-15
• Rotor-Bearing System Stability Performance Comparing Hybrid versus Conventional Bearings, Julio Gomez-Mancilla, Valeri Nosov, and Gerardo Silva-Navarro
  Volume 2005 (2005), Issue 1, Pages 16-22
• CFD Analysis of the First-Stage Rotor and Stator in a Two-Stage Mixed Flow Pump, Steven M. Miner
  Volume 2005 (2005), Issue 1, Pages 23-29
• Wake Behavior behind Turbine Cascades in Compressible Two-Dimensional Flows, Rainer Kurz
  Volume 2005 (2005), Issue 1, Pages 30-35
• Effect of Reynolds Number and Property Variation on Fluid Flow and Heat Transfer in the Entrance Region of a Turbine Blade Internal-Cooling Channel, R. Ben-Mansour and L. Al-Hadhrami
  Volume 2005 (2005), Issue 1, Pages 36-44
• Analysis of Secondary Flows in Centrifugal Impellers, Klaus Brun and Rainer Kurz
  Volume 2005 (2005), Issue 1, Pages 45-52
• Unbalance Response Prediction for Rotors on Ball Bearings Using Speed- and Load-Dependent Nonlinear Bearing Stiffness, David P. Fleming and J. V. Poplawski
  Volume 2005 (2005), Issue 1, Pages 53-59
• A Combined Numerical and Experimental Study of Heat Transfer in a Roughened Square Channel with 45∘ Ribs, M. E. Taslim and H. Liu
  Volume 2005 (2005), Issue 1, Pages 60-66
• Effect of Channel Orientation and Rib Pitch-to-Height Ratio on Pressure Drop in a Rotating Square Channel with Ribs on Two Opposite Surfaces, S. V. Prabhu, Neelabh Arora, and R. P. Vedula
  Volume 2005 (2005), Issue 1, Pages 67-76
• Investigation of Flow Behavior around Corotating Blades in a Double-Spindle Lawn Mower Deck, W. Chon and R. S. Amano
  Volume 2005 (2005), Issue 1, Pages 77-89
• Comparative Study of Unsteady Flows in a Transonic Centrifugal Compressor with Vaneless and Vaned Diffusers, Michael M. Cui
  Volume 2005 (2005), Issue 1, Pages 90-103
• A Multicoefficient Slip-Corrected Reynolds Equation for Micro-Thin Film Gas Lubrication, Eddie Yin-Kwee Ng and Ningyu Liu
  Volume 2005 (2005), Issue 2, Pages 105-111
• Performance Prediction of Cross-Flow Fans Using Mean Streamline Analysis, Jae-Won Kim, Eun Young Ahn, and Hyoung Woo Oh
  Volume 2005 (2005), Issue 2, Pages 112-116
• An Improved Integral Method for Prediction of Distorted Inlet Flow Propagation in Axial Compressor, Eddie Yin-Kwee Ng, Ningyu Liu, Hong Ngiap Lim, and Daniel Tan
  Volume 2005 (2005), Issue 2, Pages 117-127
• Synchronous Analysis for Diagnostics of Rolling Bearings in the Turbojet Engine, Zdzisław Gosiewski and Andrzej Romaniuk
  Volume 2005 (2005), Issue 2, Pages 128-134
• Numerical Simulation of Turbopump Inducer Cavitating Behavior, O. Coutier-Delgosha, P. Morel, R. Fortes-Patella, and JL. Reboud
  Volume 2005 (2005), Issue 2, Pages 135-142
• Application of Evolutionary Algorithms and Statistical Analysis in the Numerical Optimization of an Axial Compressor, Alberto Clarich, Giovanni Mosetti, Valentino Pediroda, and Carlo Poloni
  Volume 2005 (2005), Issue 2, Pages 143-151
• Numerical Simulation of Turbulent Fluid Flow and Heat Transfer in a Ribbed Rotating Two-Pass Square Duct, Tong-Miin Liou, Shih-Hui Chen, and Yi-Chen Li
  Volume 2005 (2005), Issue 2, Pages 152-160
• Optimization of Hydraulic Machinery Bladings by Multilevel CFD Techniques, Susanne Thum and Rudolf Schilling
  Volume 2005 (2005), Issue 2, Pages 161-167
• Numerical Simulation of Multiplicity and Stability of Mixed Convection in Rotating Curved Ducts, Liqiu Wang and Tianliang Yang
  Volume 2005 (2005), Issue 2, Pages 168-178
• Experimental and Numerical Investigations of a Flexible Rotor on Flexible Bearing Supports, J.-J. Sinou, C. Villa, and F. Thouverez
  Volume 2005 (2005), Issue 3, Pages 179-189
• Development and Design of a Centrifugal Compressor Volute, Cheng Xu and Michael Müller
  Volume 2005 (2005), Issue 3, Pages 190-196
• Thermal Fluid Flow Transport Phenomenon in Unsteady Rotating Drum during Spin-Down Process, Shuichi Torii and Wen-Jei Yang
  Volume 2005 (2005), Issue 3, Pages 197-201
• Investigation of the Optimum Clocking Position in a Two-Stage Axial Turbine, Dieter Bohn, Sabine Ausmeier, and Jing Ren
  Volume 2005 (2005), Issue 3, Pages 202-210
• Systematic Investigation on Conjugate Heat Transfer Rates of Film Cooling Configurations, Dieter Bohn, Jing Ren, and Karsten Kusterer
  Volume 2005 (2005), Issue 3, Pages 211-220
• Identifying and Minimising Uncertainty for Experimental Journal Bearing Studies, G. D. Wale and D. Mba
  Volume 2005 (2005), Issue 3, Pages 221-231
• The Computation of Flow and Heat Transfer through an Orthogonally Rotating Square-Ended U-Bend Using Low-Reynolds-Number Models, Konstantinos-Stephen P. Nikas and Hector Iacovides
  Volume 2005 (2005), Issue 3, Pages 232-243
• Numerical Modelization of the Flow in Centrifugal Pump: Volute Influence in Velocity and Pressure Fields, Miguel Asuaje, Farid Bakir, Smaïne Kouidri, Frank Kenyery, and Robert Rey
  Volume 2005 (2005), Issue 3, Pages 244-255
• Investigation of the Unsteady Flow Generated by an Axial Fan: Experimental Testing and Simulations, R. S. Amano, E. K. Lee, C. Xu, and Jianhui Xie
  Volume 2005 (2005), Issue 3, Pages 256-263