Volume 4 [24 articles]
All | 1-10 | 11-20 | 21-24
- Heat (Mass) Transfer in a Rotating Two-Pass Square Channel — Part II:
Local Transfer Coefficient, Smooth Channel, R. T. Kukreja, C. W. Park, and S. C. Lau
Volume 4 (1998), Issue 1, Pages 1-15 - Hysteresis on Wells Turbine Characteristics in Reciprocating Flow, T. Setoguchi, M. Takao, and K. Kaneko
Volume 4 (1998), Issue 1, Pages 17-24 - Computation of Q3D Viscous Flows in Various Annular
Turbine Stages with Heat Transfer, E. Y. K. Ng and Miao Yi
Volume 4 (1998), Issue 1, Pages 25-33 - Turbulent Flow and Heat Transfer in Circular Couette
Flows in Concentric Annulus, Shuichi Torii and Wen-Jei Yang
Volume 4 (1998), Issue 1, Pages 35-48 - Fault Diagnostic Method for Pump Running Conditions
Based on Process Modeling and Neural Network, T. Uchiyama, S. Kallweit, and H. Siekmann
Volume 4 (1998), Issue 1, Pages 49-59 - A Film-Cooling CFD Bibliography: 1971–1996, D. M. Kercher
Volume 4 (1998), Issue 1, Pages 61-72 - Two-Dimensional Convection Induced by Gravity and
Centrifugal Forces in a Rotating Porous Layer Far Away
from the Axis of Rotation, Peter Vadasz and Saneshan Govender
Volume 4 (1998), Issue 2, Pages 73-90 - A Brush Seals Program Modeling and Developments, Robert C. Hendricks, Ralph Flower, and Harold Howe
Volume 4 (1998), Issue 2, Pages 91-96 - Effects of System Rotation on Turbulence Structure:
A Review Relevant to Turbomachinery Flows, James P. Johnston
Volume 4 (1998), Issue 2, Pages 97-112 - Flow and Mass Transfer Performance in Short Pin-Fin
Channels with Different Fin Shapes, R. J. Goldstein and S. B. Chen
Volume 4 (1998), Issue 2, Pages 113-128 - Appropriate Dynamic-Stall Models for Performance
Predictions of VAWTs with NLF Blades, Christian Masson, Christophe Leclerc, and Ion Paraschivoiu
Volume 4 (1998), Issue 2, Pages 129-139 - Wind Turbine Aerodynamic Performance
by Lifting Line Method, Horia Dumitrescu and Vladimir Cardos
Volume 4 (1998), Issue 3, Pages 141-149 - Numerical Study for Optimizing Heat Transfer in High
Speed Rotating Components, S. Wittig, S. Kim, Th. Scherer, and I. Weissert
Volume 4 (1998), Issue 3, Pages 151-161 - Effect of Film Injection Location on Local Heat Transfer
Coefficient on a Gas Turbine Blade, Anant B. Mehendale, H. Wanda Jiang, Srinath V. Ekkad, and Je-Chin Han
Volume 4 (1998), Issue 3, Pages 163-174 - Heat/Mass Transfer Distribution in a Rotating Two-Pass Square Channel
Part I: Regional Heat Transfer, Smooth Channel, C. W. Park, M. Kandis, and S. C. Lau
Volume 4 (1998), Issue 3, Pages 175-188 - Small Radial Compressors: Aerodynamic Design and Analysis, K. A. R. Ismail, C. V. A. G. Rosolen, F. J. Benevenuto, and D. Lucato
Volume 4 (1998), Issue 3, Pages 189-200 - Heat Transfer on a Film-Cooled Rotating Blade Using a
Two-Equation Turbulence Model, Vijay K. Garg
Volume 4 (1998), Issue 3, Pages 201-216 - Experimental Investigation of Rotor-Stator Interaction
in Axial-Flow Turbines and Compressors, Heinz E. Gallus
Volume 4 (1998), Issue 4, Pages 217-231 - Blade Deterioration in a Gas Turbine Engine, W. Tabakoff, A. Hamed, and V. Shanov
Volume 4 (1998), Issue 4, Pages 233-241 - Modeling of Compressor Performance Deterioration
Due to Erosion, A. Hamed, W. Tabakoff, and D. Singh
Volume 4 (1998), Issue 4, Pages 243-248 - Analytic Creep Durability of Rotating Uniform Disks, Yuriy Nyashin and Victor Shishlyaev
Volume 4 (1998), Issue 4, Pages 249-256 - Calculation of Rotor Dynamic Coefficients for Labyrinth Seals, B. P. Williams and R. D. Flack
Volume 4 (1998), Issue 4, Pages 257-269 - Thermal-Fluid Transport Phenomena of a
Strongly-Heated Gas Flow in Parallel Tube Rotation, Shuichi Torii and Wen-Jei Yang
Volume 4 (1998), Issue 4, Pages 271-282 - Heat Transfer and Friction in a Low-Aspect-Ratio
Rectangular Channel with Staggered Slit-Ribbed Walls, Jenn-Jiang Hwang and Tong-Miin Liou
Volume 4 (1998), Issue 4, Pages 283-291