Volume 7 [38 articles]
All | 1-10 | 11-20 | 21-30 | 31-38
- Rotordynamic Fluid Force Moments on an Open-type Centrifugal Compressor
Impeller in Precessing Motion, Yoshiki Yoshida, Yoshinobu Tsujimoto, Daizo Yokoyama, Hideo Ohashi, and Fumitaka Kano
Volume 7 (2001), Issue 4, Pages 237-251 - Flow Field in the Turbine Rotor Passage
in an Automotive Torque Converter Based on the High
Frequency Response Rotating Five-hole Probe
Measurement
Part I: Flow Field at the Design Condition (Speed Ratio 0.6), Y. F. Liu, B. Lakshminarayana, and J. Burningham
Volume 7 (2001), Issue 4, Pages 253-269 - Flow Field in the Turbine Rotor Passage in an Automotive Torque Converter Based
on the High Frequency Response Rotating Five-hole Probe Measurement
Part II: Flow field at the off-design condition and effects of speed ratio, Y. F. Liu, B. Lakshminarayana, and J. Burningham
Volume 7 (2001), Issue 4, Pages 271-284 - Flow Structures Inside a Rotor-Stator Cavity, T. Geis, J. Ebner, S. Kim, and S. Wittig
Volume 7 (2001), Issue 4, Pages 285-300 - Stability Analysis of Symmetrical Rotors Partially
Filled with a Viscous Incompressible Fluid, Zhu Changsheng
Volume 7 (2001), Issue 5, Pages 301-310 - Model Based Fault Identification in Rotor Systems
by Least Squares Fitting, Richard Markert, Roland Platz, and Malte Seidler
Volume 7 (2001), Issue 5, Pages 311-321 - Stabilization of Centrifuges with Instabilities Due
to Fluid-Structure Interactions: Various
Control Approaches, Heinz Ulbrich, Adrian Cyllik, and Guido Ahaus
Volume 7 (2001), Issue 5, Pages 323-333 - Influence of Inter-row Gap Value on Turbine Losses, Paul G. A. Cizmas, Corbett R. Hoenninger, Shun Chen, and Harry F. Martin
Volume 7 (2001), Issue 5, Pages 335-349 - Fluid Flow and Heat Transfer in an Internal
Coolant Passage, Tom I.-P. Shih, Yu-Liang Lin, and Mark A. Stephens
Volume 7 (2001), Issue 5, Pages 351-364 - Recontouring of Jet Engine Compressor Blades
by Flow Simulation, Herwart Hönen and Matthias Panten
Volume 7 (2001), Issue 5, Pages 365-374