Volume 7 [38 articles]
All | 1-10 | 11-20 | 21-30 | 31-38
- Modeling of Tilting-Pad Journal Bearings with Transfer Functions, J. A. Vázquez and L. E. Barrett
Volume 7 (2001), Issue 1, Pages 1-10 - Using Plücker Coordinates for Pumping Speed Evaluation of Molecular Pump
in the DSMC Method, Fong-Zhi Chen, Ming-June Tsai, Yu-Wen Chang, Rong-Yuan Jou, and Hong-Ping Cheng
Volume 7 (2001), Issue 1, Pages 11-20 - Recent Development in Turbine Blade Film Cooling, Je-Chin Han and Srinath Ekkad
Volume 7 (2001), Issue 1, Pages 21-40 - A Simplified Mass Conserving Algorithm for Journal Bearing under Large Dynamic Loads, H. Hirani, K. Athre, and S. Biswas
Volume 7 (2001), Issue 1, Pages 41-51 - 3-D Viscous Flow Analysis of a Mixed Flow Pump Impeller, Steven M. Miner
Volume 7 (2001), Issue 1, Pages 53-63 - Numerical Simulation and Performance Analysis of Twin Screw Air Compressors, W. S. Lee, R. H. Ma, S. L. Chen, W. F. Wu, and H. W. Hsia
Volume 7 (2001), Issue 1, Pages 65-78 - Studies on Pulse Jet Engine by Wind Tunnel Testing, Toshihiro Nakano, Michael Zeutzius, Hideo Miyanishi, Toshiaki Setoguchi, and Kenji Kaneko
Volume 7 (2001), Issue 2, Pages 79-85 - Rotation Effect on Jet Impingement Heat Transfer in Smooth Rectangular Channels with Film Coolant Extraction, James A. Parsons and Je-Chin Han
Volume 7 (2001), Issue 2, Pages 87-103 - Instantaneous Purified Orbit: A New Tool for Analysis of Nonstationary Vibration of Rotor System, Shi Dongfeng, Qu Liangsheng, and Bao Ming
Volume 7 (2001), Issue 2, Pages 105-115 - Sliding Mode Output Feedback Control of a Flexible Rotor Supported by Magnetic Bearings, A. S. Lewis, A. Sinha, and K. W. Wang
Volume 7 (2001), Issue 2, Pages 117-129 - Numerical Analysis of Rotating Pumping Flows in Inter-Coil Rotor Cavities and Short Cooling Grooves of a Generator, Wei Tong
Volume 7 (2001), Issue 2, Pages 131-141 - Stability Analysis of a Gear Pair System Supported by Squeeze-Film Dampers, T. N. Shiau, J. R. Chang, and S. T. Choi
Volume 7 (2001), Issue 2, Pages 143-151 - Introduction
Volume 7 (2001), Issue 3, Pages i-iii - A Transient Method Using Liquid Crystal for Film Cooling Over a Convex surface, Ping-Hei Chen, Min-Sheng Hung, and Pei-Pei Ding
Volume 7 (2001), Issue 3, Pages 153-164 - The Origin of Ekman Flow in a Cavity Subject to Impulsive Rotational Motions, Wen-Jei Yang, Hiroshi Ohue, and Genshi Kawashima
Volume 7 (2001), Issue 3, Pages 165-171 - Laser-Doppler Velocimetry Measurements Inside a Backward Curved Centrifugal Fan, Tong-Miin Liou and Meng-Yu Chen
Volume 7 (2001), Issue 3, Pages 173-181 - Local Heat Transfer and Pressure Drop in a Rotating Two-Pass Ribbed Rectangular Channel, Shou-Shing Hsieh and Hsiu-Cheng Liao
Volume 7 (2001), Issue 3, Pages 183-194 - Numerical Prediction of Flow and Heat Transfer
in a Two-pass Square Channel with 90∘ Ribs, Yong-Jun Jang, Hamn-Ching Chen, and Je-Chin Han
Volume 7 (2001), Issue 3, Pages 195-208 - Numerical Computation of Turbulent Flow and Heat Transfer in a Radially Rotating
Channel with Wall Conduction, Frank K. T. Lin, G. J. Hwang, S.-C. Wong, and C. Y. Soong
Volume 7 (2001), Issue 3, Pages 209-222 - Including the Effects of Flexible Bearing Supports
in Rotating Machinery, José A. Vázquez, Lloyd E. Barrett, and Ronald D. Flack
Volume 7 (2001), Issue 4, Pages 223-236 - Rotordynamic Fluid Force Moments on an Open-type Centrifugal Compressor
Impeller in Precessing Motion, Yoshiki Yoshida, Yoshinobu Tsujimoto, Daizo Yokoyama, Hideo Ohashi, and Fumitaka Kano
Volume 7 (2001), Issue 4, Pages 237-251 - Flow Field in the Turbine Rotor Passage
in an Automotive Torque Converter Based on the High
Frequency Response Rotating Five-hole Probe
Measurement
Part I: Flow Field at the Design Condition (Speed Ratio 0.6), Y. F. Liu, B. Lakshminarayana, and J. Burningham
Volume 7 (2001), Issue 4, Pages 253-269 - Flow Field in the Turbine Rotor Passage in an Automotive Torque Converter Based
on the High Frequency Response Rotating Five-hole Probe Measurement
Part II: Flow field at the off-design condition and effects of speed ratio, Y. F. Liu, B. Lakshminarayana, and J. Burningham
Volume 7 (2001), Issue 4, Pages 271-284 - Flow Structures Inside a Rotor-Stator Cavity, T. Geis, J. Ebner, S. Kim, and S. Wittig
Volume 7 (2001), Issue 4, Pages 285-300 - Stability Analysis of Symmetrical Rotors Partially
Filled with a Viscous Incompressible Fluid, Zhu Changsheng
Volume 7 (2001), Issue 5, Pages 301-310 - Model Based Fault Identification in Rotor Systems
by Least Squares Fitting, Richard Markert, Roland Platz, and Malte Seidler
Volume 7 (2001), Issue 5, Pages 311-321 - Stabilization of Centrifuges with Instabilities Due
to Fluid-Structure Interactions: Various
Control Approaches, Heinz Ulbrich, Adrian Cyllik, and Guido Ahaus
Volume 7 (2001), Issue 5, Pages 323-333 - Influence of Inter-row Gap Value on Turbine Losses, Paul G. A. Cizmas, Corbett R. Hoenninger, Shun Chen, and Harry F. Martin
Volume 7 (2001), Issue 5, Pages 335-349 - Fluid Flow and Heat Transfer in an Internal
Coolant Passage, Tom I.-P. Shih, Yu-Liang Lin, and Mark A. Stephens
Volume 7 (2001), Issue 5, Pages 351-364 - Recontouring of Jet Engine Compressor Blades
by Flow Simulation, Herwart Hönen and Matthias Panten
Volume 7 (2001), Issue 5, Pages 365-374 - Celebration of Professor Wen-Jei Yang's 70th Birthday
Volume 7 (2001), Issue 6, Pages i-ii - Experimental and Computational Study of Trapped Vortex Combustor Sector Rig with High-Speed Diffuser Flow, R. C. Hendricks, D. T. Shouse, W. M. Roquemore, D. L. Burrus, B. S. Duncan, R. C. Ryder, A. Brankovic, N.-S. Liu, J. R. Gallagher, and J. A. Hendricks
Volume 7 (2001), Issue 6, Pages 375-385 - A Parametric Study of Solute Redistribution During
Transient Liquid Phase Diffusion Bonding Process, Tien-Chien Jen, Yuning Jiao, and Thomas Hwang
Volume 7 (2001), Issue 6, Pages 387-396 - Effects of Leading Edge Sweep on the Cavitating
Characteristics of Inducer Pumps, Allan J. Acosta, Yoshinobu Tsujimoto, Yoshiki Yoshida, Seiji Azuma, and Paul Cooper
Volume 7 (2001), Issue 6, Pages 397-404 - Study on the Performance of a Sirocco Fan (Optimum Design of Blade Shape), Tsutomu Adachi, Naohiro Sugita, and Yousuke Yamada
Volume 7 (2001), Issue 6, Pages 405-414 - Detailed Film Cooling Measurements over a Gas Turbine Blade Using a Transient Liquid Crystal Image Technique, Hui Du, Srinath V. Ekkad, Je-Chin Han, and C. Pang Lee
Volume 7 (2001), Issue 6, Pages 415-424 - Effects of Gaps Between Side-Walls and 60∘ Ribs on the Heat Transfer and Rib Induced Secondary Flow
Inside a Stationary and Rotating Cooling Channel, Robert Kiml, Sadanari Mochizuki, and Akira Murata
Volume 7 (2001), Issue 6, Pages 425-433 - Thermal Buoyancy Effects in Rotating
Non-Isothermal Flows, C. Y. Soong
Volume 7 (2001), Issue 6, Pages 435-446