Volume 8 [41 articles]

• Turbulent Flow and Endwall Heat Transfer Analysis in a 90∘ Turning Duct and Comparisons with Measured Data: Part I: Influence of Reynolds Number and Streamline Curvature on Viscous Flow Development, Kuisoon Kim, Brian G. Wiedner, and Cengiz Camci
  Volume 8 (2002), Issue 2, Pages 109-123
• Turbulent Flow and Endwall Heat Transfer Analysis in a 908 Turning Duct and Comparisons with Measured Data: Part II: Influence of Secondary Flow, Vorticity, Turbulent Kinetic Energy, and Thermal Boundary Conditions on Endwall Heat Transfer, Kuisoon Kim, Brian G. Wiedner, and Cengiz Camci
  Volume 8 (2002), Issue 2, Pages 125-140
• Comparison of the Flow Inside Whirling and Non-Whirling Smooth Annular Seals at 50% Eccentricity, Gerald L. Morrison, Mark C. Johnson, and H. Davis Thames III
  Volume 8 (2002), Issue 2, Pages 141-152
• Rotating Brush Seal, S. B. Lattime, M. J. Braun, F. K. Choy, R. C. Hendricks, and B. M. Steinetz
  Volume 8 (2002), Issue 2, Pages 153-160
• Jet Impingement Heat Transfere on Pinned Surface Using a Transient Liquid Cristal Technique, Gm S. Azad, Yizhe Huang, and Je-Chin Han
  Volume 8 (2002), Issue 3, Pages 161-173
• A New Adaptive Turbulence Model for Unsteady Flow Fields in Rotating Machinery, F. Magagnato and M. Gabi
  Volume 8 (2002), Issue 3, Pages 175-183
• A Three Dimensional Modeling of the Dynamic Behavior of Composite Rotors, E. Chatelet, D. Lornage, and G. Jacquet-Richardet
  Volume 8 (2002), Issue 3, Pages 185-192
• Study on the Fluctuating Flow in an Axial Flow Fan (Effects of Operational Conditions and Rotational Speeds), Tsutomu Adachi
  Volume 8 (2002), Issue 3, Pages 193-199
• Thermomechanical Analysis of Four-lobe Rotors in a Roots-type Multi-Recompression Heater, Honglu Wang and James D. Felske
  Volume 8 (2002), Issue 3, Pages 201-213
• Experimental Study of the Flow in the Suction Pipe of A Centrifugal Impeller: Steady Conditions Compared with Fast Start-Up, Stéphane Bolpaire, Jean-Paul Barrand, and Guy Caignaert
  Volume 8 (2002), Issue 3, Pages 215-222