Volume 9 [44 articles]

• Advances in Unsteady Boundary Layer Transition Research, Part I: Theory and Modeling, M. T. Schobeiri and L. Wright
  Volume 9 (2003), Issue 1, Pages 1-9
• Advances in Unsteady Boundary Layer Transition Research, Part II: Experimental Verification, M. T. Schobeiri and L. Wright
  Volume 9 (2003), Issue 1, Pages 11-22
• Abnormally High Power Output of Wind Turbine in Cold Weather: A Preliminary Study, Christophe Leclerc and Christian Masson
  Volume 9 (2003), Issue 1, Pages 23-33
• Erosion Testing of Coatings for V-22 Aircraft Applications, G. Y. Richardson, S. C. Lei, and W. Tabakoff
  Volume 9 (2003), Issue 1, Pages 35-40
• Thermomechanical Behavior of Rotor with Rubbing, Jerzy T. Sawicki, Alberto Montilla-Bravo, and Zdzislaw Gosiewski
  Volume 9 (2003), Issue 1, Pages 41-47
• Investigation of Flow Through Centrifugal Pump Impellers Using Computational Fluid Dynamics, Weidong Zhou, Zhimei Zhao, T. S. Lee, and S. H. Winoto
  Volume 9 (2003), Issue 1, Pages 49-61
• Expert System Source Identification of Excessive Vibration, R. Gordon Kirk and Zenglin Guo
  Volume 9 (2003), Issue 2, Pages 63-79
• Local Mass and Heat Transfer on a Turbine Blade Tip, P. Jin and R. J. Goldstein
  Volume 9 (2003), Issue 2, Pages 81-95
• Identification of Rub and Unbalance in 320 MW Turbogenerators, N. Bachschmid, P. Pennacchi, A. Vania, G. A. Zanetta, and L. Gregori
  Volume 9 (2003), Issue 2, Pages 97-112
• Transverse Crack Modeling and Validation in Rotor Systems, Including Thermal Effects, N. Bachschmid, P. Pennacchi, E. Tanzi, and S. Audebert
  Volume 9 (2003), Issue 2, Pages 113-126
• Mechatronical Design Studies on Small Brushless Motors, W. Amrhein, S. Silber, K. Nenninger, G. Trauner, and R. Schöb
  Volume 9 (2003), Issue 2, Pages 127-133
• An Experimental Study on the Fluid Forces Induced by Rotor-Stator Interaction in a Centrifugal Pump, Shijie Guo and Hidenobu Okamoto
  Volume 9 (2003), Issue 2, Pages 135-144
• Effects of Volute Design and Number of Impeller Blades on Lateral Impeller Forces and Hydraulic Performance, Daniel O. Baun and Ronald D. Flack
  Volume 9 (2003), Issue 2, Pages 145-152
• An Experimental Investigation of Transpiration Cooling. Part I: Application of an Infrared Measurement Technique, J. H. Wang, J. Messner, and H. Stetter
  Volume 9 (2003), Issue 3, Pages 153-161
• Cavitating Flow Calculations in Industry, Philippe Dupont and Tomoyoshi Okamura
  Volume 9 (2003), Issue 3, Pages 163-170
• Two- and Three-Dimensional Numerical Experiments Representing Two Limiting Cases of an In-Line Pair of Finger Seal Components, M. J. Braun, V. V. Kudriavtsev, B. M. Steinetz, and M. P. Proctor
  Volume 9 (2003), Issue 3, Pages 171-179
• Using the Modal Method in Rotor Dynamic Systems, Eduard Malenovský
  Volume 9 (2003), Issue 3, Pages 181-196
• Vibration and Stability of 3000-hp, Titanium Chemical Process Blower, Les Gutzwiller and Mark A. Corbo
  Volume 9 (2003), Issue 3, Pages 197-217
• Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge-Shaped Friction Dampers, Lars Panning, Walter Sextro, and Karl Popp
  Volume 9 (2003), Issue 3, Pages 219-228
• Panel Discussion on Inducer Design Criteria, Marc Wegner, Allan J. Acosta, and Yoshinobu Tsujimoto
  Volume 9 (2003), Issue 4, Pages 229-237
• Reduction of Discrete-Frequency Fan Noise Using Slitlike Expansion Chambers, Akira Sadamoto and Yoshinori Murakami
  Volume 9 (2003), Issue 4, Pages 239-246
• Numerical Calculation of the Three-Dimensional Swirling Flow Inside the Centrifugal Pump Volutes, E. Cezmi Nursen and Erkan Ayder
  Volume 9 (2003), Issue 4, Pages 247-253
• Rotor Dynamics Analysis of Rotating Machine Systems Using Artificial Neural Networks, M. Kalkat, Ş. Yıldırım, and I. Uzmay
  Volume 9 (2003), Issue 4, Pages 255-262
• Modeling of Unsteady Sheet Cavitation on Marine Propeller Blades, Spyros A. Kinnas, HanSeong Lee, and Yin L. Young
  Volume 9 (2003), Issue 4, Pages 263-277
• Comparison of Two Diffusers in a Transonic Centrifugal Compressor, Koji Nakagawa, Hiroshi Hayami, and Yuichi Keimi
  Volume 9 (2003), Issue 4, Pages 279-284
• Pressure Fluctuation in a Vaned Diffuser Downstream from a Centrifugal Pump Impeller, Akinori Furukawa, Hisasada Takahara, Takahiro Nakagawa, and Yusuke Ono
  Volume 9 (2003), Issue 4, Pages 285-292
• Phase-Averaged Method Applied to Periodic Flow Between Shrouded Corotating Disks, Shen-Chun Wu and Yau-Ming Chen
  Volume 9 (2003), Issue 4, Pages 293-301
• Deflections and Strains in Cracked Shafts Due to Rotating Loads: A Numerical and Experimental Analysis, Nicolò Bachschmid and Ezio Tanzi
  Volume 9 (2003), Issue 4, Pages 303-311
• Weibull-Based Design Methodology for Rotating Structures in Aircraft Engines, Erwin V. Zaretsky, Robert C. Hendricks, and Sherry Soditus
  Volume 9 (2003), Issue 5, Pages 313-325
• Steady and Unsteady Casingwall Flow Phenomena in a Single-Stage Low-Speed Compressor at Part-Load Conditions, H. Saathoff, A. Deppe, U. Stark, M. Rohdenburg, H. Rohkamm, D. Wulff, and G. Kosyna
  Volume 9 (2003), Issue 5, Pages 327-335
• Internal Flow of a High Specific-Speed Diagonal-Flow Fan (Rotor Outlet Flow Fields with Rotating Stall), Norimasa Shiomi, Wen-Xin Cai, Akio Muraoka, Kenji Kaneko, and Toshiaki Setoguchi
  Volume 9 (2003), Issue 5, Pages 337-344
• Large-Eddy Simulation of Unsteady Flow in a Mixed-Flow Pump, Chisachi Kato, Hiroshi Mukai, and Akira Manabe
  Volume 9 (2003), Issue 5, Pages 345-351
• Rotor Cascade Shape Optimization with Unsteady Passing Wakes Using Implicit Dual-Time Stepping and a Genetic Algorithm, Eun Seok Lee, George S. Dulikravich, and Brian H. Dennis
  Volume 9 (2003), Issue 5, Pages 353-361
• Numerical Simulation of Combustion and Rotor-Stator Interaction in a Turbine Combustor, Dragos D. Isvoranu and Paul G. A. Cizmas
  Volume 9 (2003), Issue 5, Pages 363-374
• Application of the Turbulent Potential Model to Unsteady Flows and Three-Dimensional Boundary Layers, J. Blair Perot, Sasanka Are, and Xing Zhang
  Volume 9 (2003), Issue 5, Pages 375-384
• Darmstadt Rotor No. 2, II: Design of Leaning Rotor Blades, Jörg Bergner, Dietmar K. Hennecke, Martin Hoeger, and Karl Engel
  Volume 9 (2003), Issue 6, Pages 385-391
• Darmstadt Rotor No. 2, III: Experimental Analysis of an Aft-Swept Axial Transonic Compressor Stage, Stephan Kablitz, Jörg Bergner, Dietmar K. Hennecke, Manfred Beversdorff, and Richard Schodl
  Volume 9 (2003), Issue 6, Pages 393-402
• Experimental Investigation of Cavitation Signatures in an Automotive Torque Converter Using a Microwave Telemetry Technique, C. L. Anderson, L. Zeng, P. O. Sweger, A. Narain, and J. R. Blough
  Volume 9 (2003), Issue 6, Pages 403-410
• Computational Fluid Dynamics in Torque Converters: Validation and Application, Jean Schweitzer and Jeya Gandham
  Volume 9 (2003), Issue 6, Pages 411-418
• Flow Characteristics at the Pump-Turbine Interface of a Torque Converter at Extreme Speed Ratios, A. Habsieger and R. D. Flack
  Volume 9 (2003), Issue 6, Pages 419-426
• Characteristics of Steady and Transient Superfluid Transport for the Cooling of Superconducting Rotating Machines, Thomas C. Chuang
  Volume 9 (2003), Issue 6, Pages 427-436
• The Dynamic Modeling of Multiple Pairs of Spur Gears in Mesh, Including Friction and Geometrical Errors, Shengxiang Jia, Ian Howard, and Jiande Wang
  Volume 9 (2003), Issue 6, Pages 437-442
• Effects of Compressibility on the Performance of a Wave-Energy Conversion Device with an Impulse Turbine Using a Numerical Simulation Technique, A. Thakker, T. S. Dhanasekaran, M. Takao, and T. Setoguchi
  Volume 9 (2003), Issue 6, Pages 443-450
• Refined Turbulence Modeling for Swirl Velocity in Turbomachinery Seals, Namhyo Kim and David L. Rhode
  Volume 9 (2003), Issue 6, Pages 451-459