Old and New Flavors of Flame (Furnace) Atomic Absorption Spectrometry

Table 1

Selected papers using FAAS in fuel analysis.

Sample (s)	Analyte	Remarks	Ref.
Biodiesel	Ca and Mg	Microemulsion as sample preparation	[35]
Ethanol	Cu, Fe, Ni, and Zn	Cellulose chemically modified with p-aminobenzoic groups was used for preconcentration step	[36]
Lubricating oil	Cu, Fe, Ni, Pb, and Zn	Sulphanilic acid was used to ash samples at 550°C	[37]
Lubricating oil	Cu, Fe, Ni, Pb, and Zn	ANOVA was used to show a trend of concentration increasing of metals in wear lubricating oils (samples were ashed)	[38]