About this Journal Submit a Manuscript Table of Contents
ISRN Biomaterials
Volume 2013 (2013), Article ID 185376, 10 pages
http://dx.doi.org/10.5402/2013/185376
Review Article

A Review of Surface Treatment Methods to Improve the Adhesive Cementation of Zirconia-Based Ceramics

1Occlusion and Fixed Prosthodontics Department, Dental School, UFMS, Campo Grande, MS, Brazil
2Department of Periodontics, Dental School, UFMS, Campo Grande, MS, Brazil
3Department of Implantology, Dental School, UFMS, Campo Grande, MS, Brazil
4Department of Restorative Dentistry and Dental Materials, Dental School, UFG, Goiânia, GO, Brazil
5Department of Dental Materials, Dental School, UNIUBE, Uberaba, MG, Brazil
6Faculdade de Odontologia, Universidade Federal de Goiás, Praça Universitária Esquina com 1a Avenida s/n, Setor Universitário, 74605-220 Goiânia, GO, Brazil

Received 17 July 2013; Accepted 29 August 2013

Academic Editors: A. Apicella, S.-J. Ding, R. Marx, and S. Sauro

Copyright © 2013 Rodrigo Dalla Lana Mattiello et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. R. Piascik, E. J. Swift, J. Y. Thompson, S. Grego, and B. R. Stoner, “Surface modification for enhanced silanation of zirconia ceramics,” Dental Materials, vol. 25, no. 9, pp. 1116–1121, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. M. B. Blatz, A. Sadan, and M. Kern, “Resin-ceramic bonding: a review of the literature,” Journal of Prosthetic Dentistry, vol. 89, no. 3, pp. 268–274, 2003. View at Publisher · View at Google Scholar · View at Scopus
  3. R. Janda, J. F. Roulet, M. Wulf, and H. J. Tiller, “A new adhesive technology for all-ceramics,” Dental Materials, vol. 19, no. 6, pp. 567–573, 2003. View at Publisher · View at Google Scholar · View at Scopus
  4. R. Amaral, M. Özcan, L. F. Valandro, I. Balducci, and M. A. Bottino, “Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions,” Journal of Biomedical Materials Research B, vol. 85, no. 1, pp. 1–9, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. M. A. Bottino, L. F. Valandro, R. Scotti, and L. Buso, “Effect of surface treatments on the resin bond to zirconium-based ceramic,” International Journal of Prosthodontics, vol. 18, no. 1, pp. 60–65, 2005. View at Scopus
  6. A. Della Bona and K. J. Anusavice, “Microstructure, composition, and etching topography of dental ceramics,” International Journal of Prosthodontics, vol. 15, no. 2, pp. 159–167, 2002. View at Scopus
  7. G. A. Borges, A. M. Sophr, M. F. de Goes, L. C. Sobrinho, and D. C. N. Chan, “Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics,” Journal of Prosthetic Dentistry, vol. 89, no. 5, pp. 479–488, 2003. View at Publisher · View at Google Scholar · View at Scopus
  8. W. Awliya, A. Odén, P. Yaman, J. B. Dennison, and M. E. Razzoog, “Shear bond strength of a resin cement to densely sintered high-purity alumina with various surface conditions,” Acta Odontologica Scandinavica, vol. 56, no. 1, pp. 9–13, 1998. View at Scopus
  9. S. Kitayama, T. Nikaido, R. Takahashi et al., “Effect of primer treatment on bonding of resin cements to zirconia ceramic,” Dental Materials, vol. 26, no. 5, pp. 426–432, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. R. M. Foxton, A. N. Cavalcanti, M. Nakajima et al., “Durability of resin cement bond to aluminium oxide and zirconia ceramics after air abrasion and laser treatment,” Journal of Prosthodontics, vol. 20, no. 2, pp. 84–92, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Özcan, C. Cura, and L. F. Valandro, “Early bond strength of two resin cements to Y-TZP ceramic using MPS or MPS/4-META silanes,” Odontology, vol. 99, no. 1, pp. 62–67, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. K. Takeuchi, A. Fujishima, A. Manabe et al., “Combination treatment of tribochemical treatment and phosphoric acid ester monomer of zirconia ceramics enhances the bonding durability of resin-based luting cements,” Dental Materials Journal, vol. 29, no. 3, pp. 316–323, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. S. M. P. Torres, G. A. Borges, A. M. Spohr, A. A. D. B. Cury, S. Yadav, and J. A. Platt, “The effect of surface treatments on the micro-shear bond strength of a resin luting agent and four all-ceramic systems,” Operative Dentistry, vol. 34, no. 4, pp. 399–407, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. F. J. T. Burke, G. J. P. Fleming, D. Nathanson, and P. M. Marquis, “Are adhesive technologies needed to support ceramics? An assessment of the current evidence,” Journal of Adhesive Dentistry, vol. 4, no. 1, pp. 7–22, 2002. View at Scopus
  15. C. J. Soares, P. V. Soares, J. C. Pereira, and R. B. Fonseca, “Surface treatment protocols in the cementation process of ceramic and laboratory-processed composite restorations: a literature review,” Journal of Esthetic and Restorative Dentistry, vol. 17, no. 4, pp. 224–235, 2005. View at Scopus
  16. C. J. Soares, L. R. M. Martins, R. B. Fonseca, L. Correr-Sobrinho, and A. J. Fernandes Neto, “Influence of cavity preparation design on fracture resistance of posterior Leucite-reinforced ceramic restorations,” Journal of Prosthetic Dentistry, vol. 95, no. 6, pp. 421–429, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. A. N. Cavalcanti, R. M. Foxton, T. F. Watson, M. T. Oliveira, M. Giannini, and G. M. Marchi, “Bond strength of resin cements to a zirconia ceramic with different surface treatments,” Operative Dentistry, vol. 34, no. 3, pp. 280–287, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. S. M. Wegner and M. Kern, “Long-term resin bond strength to zirconia ceramic,” Journal of Adhesive Dentistry, vol. 2, no. 2, pp. 139–147, 2000. View at Scopus
  19. S. M. Wegner and M. Kern, “Long-term resin bond strength to zirconia ceramic,” Journal of Esthetic and Restorative Dentistry, vol. 16, no. 5, pp. 327–328, 2004.
  20. M. Kern and S. M. Wegner, “Bonding to zirconia ceramic: adhesion methods and their durability,” Dental Materials, vol. 14, no. 1, pp. 64–71, 1998. View at Scopus
  21. M. B. Blatz, A. Sadan, J. Martin, and B. Lang, “In vitro evaluation of shear bond strengths of resin to densely-sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling,” Journal of Prosthetic Dentistry, vol. 91, no. 4, pp. 356–362, 2004. View at Publisher · View at Google Scholar · View at Scopus
  22. R. C. de Oyagüe, F. Monticelli, M. Toledano, E. Osorio, M. Ferrari, and R. Osorio, “Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic,” Dental Materials, vol. 25, no. 2, pp. 172–179, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. S. S. Atsu, M. A. Kilicarslan, H. C. Kucukesmen, and P. S. Aka, “Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin,” Journal of Prosthetic Dentistry, vol. 95, no. 6, pp. 430–436, 2006. View at Publisher · View at Google Scholar · View at Scopus
  24. L. F. Valandro, M. Özcan, M. C. Bottino, et al., “Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: the effect of surface conditioning,” Journal of Adhesive Dentistry, vol. 8, no. 3, pp. 175–181, 2006. View at Scopus
  25. R. Amaral, M. Özcan, M. A. Bottino, and L. F. Valandro, “Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning,” Dental Materials, vol. 22, no. 3, pp. 283–290, 2006. View at Publisher · View at Google Scholar · View at Scopus
  26. M. Özcan and P. K. Vallittu, “Effect of surface conditioning methods on the bond strength of luting cement to ceramics,” Dental Materials, vol. 19, no. 8, pp. 725–731, 2003. View at Publisher · View at Google Scholar · View at Scopus
  27. K. Yoshida, Y. Tsuo, and M. Atsuta, “Bonding of dual-cured resin cement to zirconia ceramic using phosphate acid ester monomer and zirconate coupler,” Journal of Biomedical Materials Research B, vol. 77, no. 1, pp. 28–33, 2006. View at Publisher · View at Google Scholar · View at Scopus
  28. J. P. Matinlinna, L. V. J. Lassila, and P. K. Vallittu, “Pilot evaluation of resin composite cement adhesion to zirconia using a novel silane system,” Acta Odontologica Scandinavica, vol. 65, no. 1, pp. 44–51, 2007. View at Publisher · View at Google Scholar · View at Scopus
  29. J. P. Matinlinna, T. Heikkinen, M. Özcan, L. V. J. Lassila, and P. K. Vallittu, “Evaluation of resin adhesion to zirconia ceramic using some organosilanes,” Dental Materials, vol. 22, no. 9, pp. 824–831, 2006. View at Publisher · View at Google Scholar · View at Scopus
  30. B. Ersu, B. Yuzugullu, A. Ruya Yazici, and S. Canay, “Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments,” Journal of Dentistry, vol. 37, no. 11, pp. 848–856, 2009. View at Publisher · View at Google Scholar · View at Scopus
  31. M. N. Aboushelib, C. J. Kleverlaan, and A. J. Feilzer, “Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia-based materials,” Journal of Prosthetic Dentistry, vol. 98, no. 5, pp. 379–388, 2007. View at Publisher · View at Google Scholar · View at Scopus
  32. M. N. Aboushelib, A. J. Feilzer, and C. J. Kleverlaan, “Bonding to zirconia using a new surface treatment,” Journal of Prosthodontics, vol. 19, no. 5, pp. 340–346, 2010. View at Publisher · View at Google Scholar · View at Scopus
  33. M. N. Aboushelib, H. Mirmohamadi, J. P. Matinlinna, E. Kukk, H. F. Ounsi, and Z. Salameh, “Innovations in bonding to zirconia-based materials. Part II: focusing on chemical interactions,” Dental Materials, vol. 25, no. 8, pp. 989–993, 2009. View at Publisher · View at Google Scholar · View at Scopus
  34. J. W. McLean and T. H. Hughes, “The reinforcement of dental porcelain with ceramic oxides,” British Dental Journal, vol. 119, no. 6, pp. 251–267, 1965. View at Scopus
  35. A. Della Bona, M. Borba, P. Benetti, and D. Cecchetti, “Effect of surface treatments on the bond strength of a zirconia-reinforced ceramic to composite resin,” Brazilian Oral Research, vol. 21, no. 1, pp. 10–15, 2007. View at Scopus
  36. A. Della Bona, T. A. Donassollo, F. F. Demarco, A. A. Barrett, and J. J. Mecholsky Jr., “Characterization and surface treatment effects on topography of a glass-infiltrated alumina/zirconia-reinforced ceramic,” Dental Materials, vol. 23, no. 6, pp. 769–775, 2007. View at Publisher · View at Google Scholar · View at Scopus
  37. T. A. Donassollo, F. F. Demarco, and A. Della Bona, “Resin bond strength to a zirconia-reinforced ceramic after different surface treatments,” General Dentistry, vol. 57, no. 4, pp. 374–379, 2009. View at Scopus
  38. P. Dérand and T. Dérand, “Bond strength of luting cements to zirconium oxide ceramics,” International Journal of Prosthodontics, vol. 13, no. 2, pp. 131–135, 2000. View at Scopus
  39. R. C. Oyagüe, F. Monticelli, M. Toledano, E. Osorio, M. Ferrari, and R. Osorio, “Effect of water aging on microtensile bond strength of dual-cured resin cements to pre-treated sintered zirconium-oxide ceramics,” Dental Materials, vol. 25, no. 3, pp. 392–399, 2009. View at Publisher · View at Google Scholar · View at Scopus
  40. M. Özcan, H. Nijhuis, and L. F. Valandro, “Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging,” Dental Materials Journal, vol. 27, no. 1, pp. 99–104, 2008. View at Publisher · View at Google Scholar · View at Scopus
  41. Y. Tsuo, K. Yoshida, and M. Atsuta, “Effects of alumina-blasting and adhesive primers on bonding between resin luting agent and zirconia ceramics,” Dental Materials Journal, vol. 25, no. 4, pp. 669–674, 2006. View at Scopus
  42. B. Yang, A. Barloi, and M. Kern, “Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin,” Dental Materials, vol. 26, no. 1, pp. 44–50, 2010. View at Publisher · View at Google Scholar · View at Scopus
  43. F. Lehmann and M. Kern, “Durability of resin bonding to zirconia ceramic using different primers,” The Journal of Adhesive Dentistry, vol. 11, no. 6, pp. 479–483, 2009. View at Scopus
  44. J. Y. Yun, S. R. Ha, J. B. Lee, and S. H. Kim, “Effect of sandblasting and various metal primers on the shear bond strength of resin cement to Y-TZP ceramic,” Dental Materials, vol. 26, no. 7, pp. 650–658, 2010. View at Scopus
  45. L. Silva, A. Costa, J. Queiroz, M. Bottino, and L. Valandro, “Ceramic primer heat-treatment effect on resin cement/Y-TZP bond strength,” Operative Dentistry, vol. 37, no. 6, pp. 634–640, 2012. View at Publisher · View at Google Scholar
  46. P. Magne, M. P. G. Paranhos, and L. H. Burnett Jr., “New zirconia primer improves bond strength of resin-based cements,” Dental Materials, vol. 26, no. 4, pp. 345–352, 2010. View at Publisher · View at Google Scholar · View at Scopus
  47. J. P. Matinlinna, L. V. J. Lassila, M. Özcan, A. Yli-Urpo, and P. K. Vallittu, “An introduction to silanes and their clinical applications in dentistry,” International Journal of Prosthodontics, vol. 17, no. 2, pp. 155–164, 2004. View at Scopus
  48. N. Barghi, “To silanate or not to silanate: making a clinical decision,” Compendium of Continuing Education in Dentistry, vol. 21, no. 8, pp. 659–666, 2000. View at Scopus
  49. R. Frankenberger, N. Krämer, and J. Sindel, “Repair strength of etched vs silica-coated metal-ceramic and all-ceramic restorations,” Operative Dentistry, vol. 25, no. 3, pp. 209–215, 2000. View at Scopus
  50. H. R. Horn, “Porcelain laminate veneers bonded to etched enamel,” Dental Clinics of North America, vol. 27, no. 4, pp. 671–684, 1983. View at Scopus
  51. K. J. M. Soderholm and S. W. Shang, “Molecular orientation of siliane at the surface of colloidal silica,” Journal of Dental Research, vol. 72, no. 6, pp. 1050–1054, 1993. View at Scopus
  52. T. Derand, M. Molin, and K. Kvam, “Bond strength of composite luting cement to zirconia ceramic surfaces,” Dental Materials, vol. 21, no. 12, pp. 1158–1162, 2005. View at Publisher · View at Google Scholar · View at Scopus
  53. L. F. Valandro, M. Özcan, R. Amaral, F. P. P. Leite, and M. A. Bottino, “Microtensile bond strength of a resin cement to silica-coated and silanized in-ceram zirconia before and after aging,” International Journal of Prosthodontics, vol. 20, no. 1, pp. 70–72, 2007. View at Scopus
  54. A. Casucci, E. Osorio, R. Osorio et al., “Influence of different surface treatments on surface zirconia frameworks,” Journal of Dentistry, vol. 37, no. 11, pp. 891–897, 2009. View at Publisher · View at Google Scholar · View at Scopus
  55. T. T. Heikkinen, L. V. J. Lassila, J. P. Matinlinna, and P. K. Vallittu, “Effect of operating air pressure on tribochemical silica-coating,” Acta Odontologica Scandinavica, vol. 65, no. 4, pp. 241–248, 2007. View at Publisher · View at Google Scholar · View at Scopus
  56. M. Kern and V. P. Thompson, “Sandblasting and silica-coating of dental alloys: volume loss, morphology and changes in the surface composition,” Dental Materials, vol. 9, no. 3, pp. 155–161, 1993. View at Publisher · View at Google Scholar · View at Scopus
  57. M. Wolfart, F. Lehmann, S. Wolfart, and M. Kern, “Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods,” Dental Materials, vol. 23, no. 1, pp. 45–50, 2007. View at Publisher · View at Google Scholar · View at Scopus
  58. M. Kern, A. Barloi, and B. Yang, “Surface conditioning influences zirconia ceramic bonding,” Journal of Dental Research, vol. 88, no. 9, pp. 817–822, 2009. View at Publisher · View at Google Scholar · View at Scopus
  59. M. Kern and V. P. Thompson, “Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability,” The Journal of Prosthetic Dentistry, vol. 73, no. 3, pp. 240–249, 1995. View at Scopus
  60. C. Chen, C. J. Kleverlaan, and A. J. Feilzer, “Effect of an experimental zirconia-silica coating technique on micro tensile bond strength of zirconia in different priming conditions,” Dental Materials, vol. 28, no. 8, pp. e127–e134, 2012. View at Publisher · View at Google Scholar · View at Scopus
  61. H. Lüthy, O. Loeffel, and C. H. F. Hammerle, “Effect of thermocycling on bond strength of luting cements to zirconia ceramic,” Dental Materials, vol. 22, no. 2, pp. 195–200, 2006. View at Publisher · View at Google Scholar · View at Scopus
  62. B. K. Kim, H. E. K. Bae, J. S. Shim, and K. W. Lee, “The influence of ceramic surface treatments on the tensile bond strength of composite resin to all-ceramic coping materials,” Journal of Prosthetic Dentistry, vol. 94, no. 4, pp. 357–362, 2005. View at Publisher · View at Google Scholar · View at Scopus
  63. D. Re, D. Augusti, I. Sailer, D. Spreafico, and A. Cerutti, “The effect of surface treatment on the adhesion of resin cements to Y-TZP,” The European Journal of Esthetic Dentistry, vol. 3, no. 2, pp. 186–196, 2008. View at Scopus
  64. A. Piwowarczyk, H. C. Lauer, and J. A. Sorensen, “The shear bond strength between luting cements and zirconia ceramics after two pre-treatments,” Operative Dentistry, vol. 30, no. 3, pp. 382–388, 2005. View at Scopus
  65. M. Uo, G. Sjögren, A. Sundh, M. Goto, F. Watari, and M. Bergman, “Effect of surface condition of dental zirconia ceramic (Denzir) on bonding,” Dental Materials Journal, vol. 25, no. 3, pp. 626–631, 2006. View at Publisher · View at Google Scholar · View at Scopus
  66. F. P. Nothdurft, P. J. Motter, and P. R. Pospiech, “Effect of surface treatment on the initial bond strength of different luting cements to zirconium oxide ceramic,” Clinical Oral Investigations, vol. 13, no. 2, pp. 229–235, 2009. View at Publisher · View at Google Scholar · View at Scopus
  67. R. Tanaka, A. Fujishima, Y. Shibata, A. Manabe, and T. Miyazaki, “Cooperation of phosphate monomer and silica modification on zirconia,” Journal of Dental Research, vol. 87, no. 7, pp. 666–670, 2008. View at Publisher · View at Google Scholar · View at Scopus
  68. M. B. Blatz, G. Chiche, S. Holst, and A. Sadan, “Influence of surface treatment and simulated aging on bond strengths of luting agents to zirconia,” Quintessence International, vol. 38, no. 9, pp. 745–753, 2007. View at Scopus
  69. M. J. Kim, Y. K. Kim, K. H. Kim, and T. Y. Kwon, “Shear bond strengths of various luting cements to zirconia ceramic: surface chemical aspects,” Journal of Dentistry, vol. 39, no. 11, pp. 795–803, 2011. View at Publisher · View at Google Scholar · View at Scopus
  70. Ç. Ural, T. Külünk, Ş. Külünk, M. Kurt, and S. Baba, “Determination of resin bond strength to zirconia ceramic surface using different primers,” Acta Odontologica Scandinavica, vol. 69, no. 1, pp. 48–53, 2011. View at Publisher · View at Google Scholar · View at Scopus
  71. A. Usumez, N. Hamdemirci, B. Y. Koroglu, I. Simsek, O. Parlar, and T. Sari, “Bond strength of resin cement to zirconia ceramic with different surface treatments,” Lasers in Medical Science, vol. 28, no. 1, pp. 259–266, 2013. View at Publisher · View at Google Scholar
  72. M. G. Subasi and O. Inan, “Influence of surface treatments and resin cement selection on bonding to zirconia,” Lasers in Medical Science, 2012. View at Publisher · View at Google Scholar
  73. T. Derand, M. Molin, E. Kleven, P. Haag, and S. Karlsson, “Bond strength of luting materials to ceramic crowns after different surface treatments,” The European Journal of Prosthodontics and Restorative Dentistry, vol. 16, no. 1, pp. 35–38, 2008. View at Scopus
  74. M. N. Aboushelib, J. P. Matinlinna, Z. Salameh, and H. Ounsi, “Innovations in bonding to zirconia-based materials: part I,” Dental Materials, vol. 24, no. 9, pp. 1268–1272, 2008. View at Publisher · View at Google Scholar · View at Scopus
  75. A. Vanderlei, M. Bottino, and L. Valandro, “Evaluation of resin bond strength to yttria-stabilized tetragonal zirconia and framework marginal fit: comparison of different surface conditionings,” Operative Dentistry, 2013. View at Publisher · View at Google Scholar
  76. M. B. Blatz, J. H. Phark, F. Ozer et al., “In vitro comparative bond strength of contemporary self-adhesive resin cements to zirconium oxide ceramic with and without air-particle abrasion,” Clinical Oral Investigations, vol. 14, no. 2, pp. 187–192, 2010. View at Publisher · View at Google Scholar · View at Scopus
  77. D. M. Qeblawi, C. A. Muñoz, J. D. Brewer, and E. A. Monaco Jr., “The effect of zirconia surface treatment on flexural strength and shear bond strength to a resin cement,” Journal of Prosthetic Dentistry, vol. 103, no. 4, pp. 210–220, 2010. View at Publisher · View at Google Scholar · View at Scopus
  78. M. Inokoshi, A. Kameyama, J. de Munck, S. Minakuchi, and B. van Meerbeek, “Durable bonding to mechanically and/or chemically pre-treated dental zirconia,” Journal of Dentistry, vol. 41, no. 2, pp. 170–179, 2013. View at Publisher · View at Google Scholar
  79. H. Sano, “Microtensile testing, nanoleakage, and biodegradation of resin-dentin bonds,” Journal of Dental Research, vol. 85, no. 1, pp. 11–14, 2006. View at Publisher · View at Google Scholar · View at Scopus