About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [46 citations: 46 articles]

Articles published in ISRN Chemical Engineering have been cited 46 times. The following is a list of the 46 articles that have cited the articles published in ISRN Chemical Engineering.

  • A. Moreira Keila, N. Herculano Polyanna, de H. C. Maciel Marlia, S. Porto Tatiana, R. Spier Michele, Maria Souza-Motta Cristina, L. F. Porto Ana, and R. Soccol Carlos, “Optimization of phytase production by Aspergillus japonicus Saito URM 5633 using cassava bast as substrate in solid state fermentation,” African Journal of Microbiology Research, vol. 8, no. 9, pp. 929–938, 2014. View at Publisher · View at Google Scholar
  • Shweta Kulshreshtha, Nupur Mathur, and Pradeep Bhatnagar, “Mushroom as a product and their role in mycoremediation,” AMB Express, vol. 4, no. 1, pp. 29, 2014. View at Publisher · View at Google Scholar
  • Anil B Shrirao, Frank H Kung, Derek Yip, Cheul H Cho, and Ellen Townes-Anderson, “Vacuum-assisted fluid flow in microchannels to pattern substrates and cells,” Biofabrication, vol. 6, no. 3, pp. 035016, 2014. View at Publisher · View at Google Scholar
  • S. Hamieh, R. Beauchet, L. Lemee, J. Toufaily, B. Koubaissy, T. Hamieh, and Y. Pouilloux, “Bio oil synthesis by coupling biological biomass pretreatment and catalytic hydroliquefaction process,” Bioresource Technology, vol. 156, pp. 389–394, 2014. View at Publisher · View at Google Scholar
  • E. Gallegos-Suárez, F.R. García-García, I.D. González-Jiménez, I. Rodríguez-Ramos, A. Guerreo-Ruiz, and K. Li, “Ceramic hollow fibres catalytic enhanced reactors for glycerol steam reforming,” Catalysis Today, 2014. View at Publisher · View at Google Scholar
  • Princy Gupta, and Satya Paul, “Solid acids: Green alternatives for acid catalysis,” Catalysis Today, 2014. View at Publisher · View at Google Scholar
  • Lidija V. Trandafilović, Radenka Krsmanović Whiffen, Suzana Dimitrijević-Branković, Milovan Stoiljković, Adriaan S. Luyt, and Vladimir Djoković, “ZnO/Ag hybrid nanocubes in alginate biopolymer: Synthesis and properties,” Chemical Engineering Journal, vol. 253, pp. 341–349, 2014. View at Publisher · View at Google Scholar
  • I. Adánez-Rubio, P. Gayán, A. Abad, F. García-Labiano, L. F. de Diego, and J. Adánez, “Kinetic analysis of a Cu-based Oxygen Carrier: relevance of temperature and oxygen partial pressure on reduction and oxidation reactions rates in Chemical Looping with Oxygen Uncoupling (CLOU),” Chemical Engineering Journal, 2014. View at Publisher · View at Google Scholar
  • A. O. Sharif, S. Al-Aibi, D. Hawkins, and R. Thorpe, “Analytical solution and experimental measurements for temperature distribut ion prediction of three-phase direct-contact condenser,” Energy, vol. 67, pp. 538–547, 2014. View at Publisher · View at Google Scholar
  • Mehdi Arjmand, Roeland F. Kooiman, Magnus Rydén, Henrik Leion, Tobias Per Mattisson, and Anders Lyngfelt, “ Sulphur Tolerance of Ca x Mn 1−y M y O 3−δ (M = Mg, Ti) Perovskite-type Oxygen Carriers in Chemical-Looping with Oxygen Uncoupling (CLOU) ,” Energy & Fuels, pp. 140115013628009, 2014. View at Publisher · View at Google Scholar
  • Sylvain Giraudet, Benoit Boulinguiez, and Pierre Le Cloirec, “Adsorption and Electrothermal Desorption of Volatile Organic Compounds and Siloxanes onto an Activated Carbon Fiber Cloth for Biogas Purification,” Energy & Fuels, pp. 140603163538008, 2014. View at Publisher · View at Google Scholar
  • Vinayagam Ramesh, and Vytla Ramachandra Murty, “ Sequential Statistical Optimization of Media Components for the Production of Glucoamylase by Thermophilic Fungus Humicola grisea MTCC 352 ,” Enzyme Research, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Damien Amadei, Maria D. Chatzidaki, Julia Devienne, Julien Monteil, Maud Cansell, Aristotelis Xenakis, and Fernando Leal-Calderon, “Low shear-rate process to obtain transparent W/O fine emulsions as functional foods,” Food Research International, vol. 62, pp. 533–540, 2014. View at Publisher · View at Google Scholar
  • I. Adánez-Rubio, A. Abad, P. Gayán, L.F. de Diego, F. García-Labiano, and J. Adánez, “Biomass combustion with CO2 capture by chemical looping with oxygen uncoupling (CLOU),” Fuel Processing Technology, vol. 124, pp. 104–114, 2014. View at Publisher · View at Google Scholar
  • Hameed B. Mahood, Adel O. Sharif, and Rex B. Thorpe, “Transient volumetric heat transfer coefficient prediction of a three-phase direct contact condenser,” Heat and Mass Transfer, 2014. View at Publisher · View at Google Scholar
  • Vikesh G. Lade, Achyut D. Pakhare, and Virendra K. Rathod, “Mass Transfer Studies in Pulsed Sieve Plate Extraction Column for the Removal of Tributyl Phosphate from Aqueous Nitric Acid,” Industrial & Engineering Chemistry Research, pp. 140318082123007, 2014. View at Publisher · View at Google Scholar
  • H. Y. Sohn, and Kevin J. Whitty, “Oxidation Kinetics of Cu2O in Oxygen Carriers for Chemical Looping with Oxy gen Uncoupling,” Industrial & Engineering Chemistry Research, vol. 53, no. 8, pp. 2976–2986, 2014. View at Publisher · View at Google Scholar
  • Zan Liu, and William H. Green, “Analysis of adsorbent-based warm CO2 capture technology for Integrated Gasification Combined Cycle (IGCC) power plants,” Industrial & Engineering Chemistry Research, pp. 140604165129009, 2014. View at Publisher · View at Google Scholar
  • Carl Linderholm, Pavleta Knutsson, Matthias Schmitz, Pontus Markström, and Anders Lyngfelt, “Material balances of carbon, sulfur, nitrogen and ilmenite in a 100kW CLC reactor system,” International Journal of Greenhouse Gas Control, vol. 27, pp. 188–202, 2014. View at Publisher · View at Google Scholar
  • Raffaele Molinari, Tiziana Marino, and Pietro Argurio, “Photocatalytic membrane reactors for hydrogen production from water,” International Journal of Hydrogen Energy, 2014. View at Publisher · View at Google Scholar
  • Hiroki Miyajima, Maria Camelita Kasuya, and Kenichi Hatanaka, “Dodecafluoroheptanol: Oxygen reservoir for the culture of mouse melanoma B16 cells,” Journal of Fluorine Chemistry, vol. 163, pp. 46–49, 2014. View at Publisher · View at Google Scholar
  • Peck Loo Kiew, and Zainal Ahmad, “Kinetics and Modeling of Pepsin Soluble Collagen (PSC) Extraction from the Skin of Malaysian catfish (Hybrid Clarias sp.),” Journal of The Korean Society for Applied Biological Chemistry, vol. 57, no. 1, pp. 53–66, 2014. View at Publisher · View at Google Scholar
  • Ganesh R. Kale, Bhaskar D. Kulkarni, and Ranjit N. Chavan, “Combined gasification of lignite coal: Thermodynamic and application study,” Journal of the Taiwan Institute of Chemical Engineers, vol. 45, no. 1, pp. 163–173, 2014. View at Publisher · View at Google Scholar
  • Sushant Kumar, and Surendra K. Saxena, “A comparative study of CO2 sorption properties for different oxides,” Materials for Renewable and Sustainable Energy, vol. 3, no. 3, 2014. View at Publisher · View at Google Scholar
  • R. Kotteeswaran, and L. Sivakumar, “Optimal Tuning of Decentralized PI Controller of Nonlinear Multivariable Process Using Archival Based Multiobjective Particle Swarm Optimization,” Modelling and Simulation in Engineering, vol. 2014, pp. 1–16, 2014. View at Publisher · View at Google Scholar
  • Geraldine Merle, Morgane Seon-Lutz, Joao Henrique Lopes, and Jake E. Barralet, “Hierarchical Stable Enzyme Microenvironments for High-Temperature Stability in Amine Solvents,” Particle & Particle Systems Characterization, 2014. View at Publisher · View at Google Scholar
  • Thao M. Ho, Tony Howes, and Bhesh R. Bhandari, “Encapsulation of gases in powder solid matrices and their applications: a review,” Powder Technology, 2014. View at Publisher · View at Google Scholar
  • Hiroaki Onoe, Kiichi Inamori, Masahiro Takinoue, and Shoji Takeuchi, “Centrifuge-based cell encapsulation in hydrogel microbeads using sub-microliter sample solution,” RSC Advances, vol. 4, no. 58, pp. 30480, 2014. View at Publisher · View at Google Scholar
  • Reem Ahmed, Chandra M. Sinnathambi, Usama Eldmerdash, and Duvvuri Subbarao, “Thermodynamics Analysis of Refinery Sludge Gasification in Adiabatic Updraft Gasifier,” The Scientific World Journal, vol. 2014, pp. 1–8, 2014. View at Publisher · View at Google Scholar
  • Johnson H. Y. Chung, Sina Naficy, Zhilian Yue, Robert Kapsa, Anita Quigley, Simon E. Moulton, and Gordon G. Wallace, “Bio-ink properties and printability for extrusion printing living cells,” Biomaterials Science, vol. 1, no. 7, pp. 763, 2013. View at Publisher · View at Google Scholar
  • Aleš Zadražil, and František Štěpánek, “Remote control of desorption by radiofrequency heating: Single pellet experiments,” Chemical Engineering Science, 2013. View at Publisher · View at Google Scholar
  • Mark E Davis, “Zeolites From a Materials Chemistry Perspective,” Chemistry of Materials, pp. 130906030614005, 2013. View at Publisher · View at Google Scholar
  • Gabor Konya, Christopher K. Clayton, Robert J. Lewis, Blake R. Wilde, Edward M. Eyring, and Kevin J. Whitty, “Characteristics and CLOU Performance of a Novel SiO2-Supported Oxygen Carri er Prepared from CuO and beta-SiC,” Energy & Fuels, vol. 27, no. 10, pp. 6040–6047, 2013. View at Publisher · View at Google Scholar
  • Maria Elena Russo, Giuseppe Olivieri, Clemente Capasso, Viviana De Luca, Antonio Marzocchella, Piero Salatino, and Mosè Rossi, “Kinetic study of a novel thermo-stable α-carbonic anhydrase for biomimetic CO2 capture,” Enzyme and Microbial Technology, 2013. View at Publisher · View at Google Scholar
  • Anshu Singhal, Mrinal R. Pai, Rekha Rao, Kodanthakurup T. Pillai, Ingo Lieberwirth, and Avesh K. Tyagi, “Copper(I) Oxide Nanocrystals - One Step Synthesis, Characterization, Formation Mechanism, and Photocatalytic Properties,” European Journal of Inorganic Chemistry, vol. 2013, no. 14, pp. 2640–2651, 2013. View at Publisher · View at Google Scholar
  • Chuck W. F. Yu, and Jeong Tai Kim, “Photocatalytic Oxidation for Maintenance of Indoor Environmental Quality,” Indoor and Built Environment, vol. 22, no. 1, pp. 39–51, 2013. View at Publisher · View at Google Scholar
  • Djéssica Tatiane Raspe, Lúcio Cardozo Filho, and Camila da Silva, “Effect of Additives and Process Variables on Enzymatic Hydrolysis of Macauba Kernel Oil (Acrocomia aculeata),” International Journal of Chemical Engineering, vol. 2013, pp. 1–8, 2013. View at Publisher · View at Google Scholar
  • Dazheng Jing, Tobias Mattisson, Henrik Leion, Magnus Rydén, and Anders Lyngfelt, “Examination of Perovskite Structure CaMnO3-δ with MgO Addition as Oxygen Carrier for Chemical Looping with Oxygen Uncoupling Using Methane and Syngas,” International Journal of Chemical Engineering, vol. 2013, pp. 1–16, 2013. View at Publisher · View at Google Scholar
  • Kilsung Kwon, Seung Jun Lee, Longnan Li, Changheon Han, and Daejoong Kim, “Energy harvesting system using reverse electrodialysis with nanoporous polycarbonate track-etch membranes,” International Journal of Energy Research, 2013. View at Publisher · View at Google Scholar
  • Gullapelli Sadanandam, Kannekanti Lalitha, Valluri Durga Kumari, Muthukonda V. Shankar, and Machiraju Subrahmanyam, “Cobalt doped TiO2: A stable and efficient photocatalyst for continuous hydrogen production from glycerol: Water mixtures under solar light irradiation,” International Journal of Hydrogen Energy, 2013. View at Publisher · View at Google Scholar
  • Jingzheng Ren, Alessandro Manzardo, Sara Toniolo, and Antonio Scipioni, “Sustainability of hydrogen supply chain. Part II: Prioritizing and classifying the sustainability of hydrogen supply chains based on the combination of extension theory and AHP,” International Journal of Hydrogen Energy, 2013. View at Publisher · View at Google Scholar
  • Jingzheng Ren, Alessandro Manzardo, Sara Toniolo, and Antonio Scipioni, “Sustainability of hydrogen supply chain. Part I: Identification of critical criteria and cause–effect analysis for enhancing the sustainability using DEMATEL,” International Journal of Hydrogen Energy, 2013. View at Publisher · View at Google Scholar
  • Selvaraj Raja, and Vytla Ramachandra Murty, “Optimization of Aqueous Two-Phase Systems for the Recovery of Soluble Proteins from Tannery Wastewater Using Response Surface Methodology,” Journal of Engineering, vol. 2013, pp. 1–10, 2013. View at Publisher · View at Google Scholar
  • M. A. Tantawy, A. M. El-Roudi, Elham M. Abdalla, and M. A. Abdelzaher, “Fire Resistance of Sewage Sludge Ash Blended Cement Pastes,” Journal of Engineering, vol. 2013, pp. 1–7, 2013. View at Publisher · View at Google Scholar
  • Jianbing Li, Xinyuan Song, Guangji Hu, and Ronald Wallen Thring, “Ultrasonic desorption of petroleum hydrocarbons from crude oil contaminated soils,” Journal of Environmental Science and Health, Part A, vol. 48, no. 11, pp. 1378–1389, 2013. View at Publisher · View at Google Scholar
  • Yu S. Chekryshkin, “Deep hexachlorocyclohexane oxidation on molten high-basic catalysts,” Russian Journal of Applied Chemistry, vol. 86, no. 5, pp. 648–653, 2013. View at Publisher · View at Google Scholar