About this Journal Submit a Manuscript Table of Contents
ISRN Materials Science
Volume 2012 (2012), Article ID 746308, 25 pages
http://dx.doi.org/10.5402/2012/746308
Review Article

Fatigue in Adhesively Bonded Joints: A Review

Department of Mechanical Construction and Production, Ghent University, Technologiepark 903, 9052 Zwijnaarde, Belgium

Received 22 August 2012; Accepted 3 October 2012

Academic Editors: J. F. Bartolomé, D. Chicot, and J. E. Lowther

Copyright © 2012 M. M. Abdel Wahab. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y.-M. Jen, “Fatigue life evaluation of adhesively bonded scarf joints,” International Journal of Fatigue, vol. 36, no. 1, pp. 30–39, 2012. View at Publisher · View at Google Scholar
  2. G. Altan, M. Topçu, and H. Çallioǧlu, “The effects of the butterfly joints on failure loads and fatigue performance of composite structures,” Science and Engineering of Composite Materials, vol. 17, no. 3, pp. 199–212, 2010. View at Scopus
  3. G. Fessel, J. G. Broughton, N. A. Fellows, J. F. Durodola, and A. R. Hutchinson, “Fatigue performance of metallic reverse-bent joints,” Fatigue & Fracture of Engineering Materials & Structures, vol. 32, no. 9, pp. 704–712, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. P. R. Underhill, A. N. Rider, and P. Livingstone, “Fatigue behaviour of aluminum bonded joints as a function of wedge test performance,” Journal of Adhesion Science and Technology, vol. 23, no. 4, pp. 555–566, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. Zhang, A. P. Vassilopoulos, and T. Keller, “Stiffness degradation and fatigue life prediction of adhesively-bonded joints for fiber-reinforced polymer composites,” International Journal of Fatigue, vol. 30, no. 10-11, pp. 1813–1820, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. R. T. Tenchev and B. G. Falzon, “An experimental and numerical study of the static and fatigue performance of a composite adhesive repair,” Key Engineering Materials, vol. 383, pp. 25–34, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. V. Marcadon, Y. Nadot, A. Roy, and J. L. Gacougnolle, “Fatigue behaviour of T-joints for marine applications,” International Journal of Adhesion and Adhesives, vol. 26, no. 7, pp. 481–489, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Zhou and T. Keller, “Fatigue behavior of adhesively bonded joints composed of pultruded GFRP adherends for civil infrastructure applications,” Composites A, vol. 37, no. 8, pp. 1119–1130, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. Q. Zeng and C. T. Sun, “Fatigue performance of a bonded wavy composite lap joint,” Fatigue & Fracture of Engineering Materials & Structures, vol. 27, no. 5, pp. 413–422, 2004. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Imanaka, K. Ishii, and H. Nakayama, “Evaluation of fatigue strength of adhesively bonded single and single step double lap joints based on stress singularity parameters,” Engineering Fracture Mechanics, vol. 62, no. 4-5, pp. 409–424, 1999. View at Scopus
  11. H. S. da Costa Mattos, A. H. Monteiro, and R. Palazzetti, “Failure analysis of adhesively bonded joints in composite materials,” Materials & Design, vol. 33, pp. 242–247, 2012. View at Publisher · View at Google Scholar
  12. Y.-M. Jen and C.-W. Ko, “Evaluation of fatigue life of adhesively bonded aluminum single-lap joints using interfacial parameters,” International Journal of Fatigue, vol. 32, no. 2, pp. 330–340, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Bernasconi, S. Beretta, F. Moroni, and A. Pirondi, “Local stress analysis of the fatigue behaviour of adhesively bonded thick composite laminates,” The Journal of Adhesion, vol. 86, no. 5-6, pp. 480–500, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Melander, J. Linder, H. Stensiö, M. Larsson, A. Gustavsson, and G. Björkman, “How defects in an adhesive layer influence the fatigue strength of bonded steel-sheet specimens,” Fatigue & Fracture of Engineering Materials & Structures, vol. 22, no. 5, pp. 421–426, 1999. View at Publisher · View at Google Scholar · View at Scopus
  15. S. K. Mazumdar and P. K. Mallick, “Static and fatigue behavior of adhesive joints in SMC-SMC composites,” Polymer Composites, vol. 19, no. 2, pp. 139–146, 1998. View at Scopus
  16. S. Azari, M. Papini, and J. K. Spelt, “Effect of adhesive thickness on fatigue and fracture of toughened epoxy joints—part I: experiments,” Engineering Fracture Mechanics, vol. 78, no. 1, pp. 153–162, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. S. Azari, M. Papini, and J. K. Spelt, “Effect of adhesive thickness on fatigue and fracture of toughened epoxy joints—part II: analysis and finite element modeling,” Engineering Fracture Mechanics, vol. 78, no. 1, pp. 138–152, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. C. Blanchard, A. Chateauminois, and L. Vincent, “A new testing methodology for the assessment of fatigue properties of structural adhesives,” International Journal of Adhesion and Adhesives, vol. 16, no. 4, pp. 289–299, 1996. View at Publisher · View at Google Scholar · View at Scopus
  19. G. Meneghetti, M. Quaresimin, and M. Ricotta, “Influence of the interface ply orientation on the fatigue behaviour of bonded joints in composite materials,” International Journal of Fatigue, vol. 32, no. 1, pp. 82–93, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. J. M. Ferreira, H. Silva, J. D. Costa, and M. Richardson, “Stress analysis of lap joints involving natural fibre reinforced interface layers,” Composites B, vol. 36, no. 1, pp. 1–7, 2005. View at Publisher · View at Google Scholar · View at Scopus
  21. X. He, “A review of finite element analysis of adhesively bonded joints,” International Journal of Adhesion and Adhesives, vol. 31, no. 4, pp. 248–264, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. X. He, “FEA of fatigue behaviour of adhesively bonded joints,” Advanced Materials Research, vol. 148-149, pp. 753–757, 2011. View at Publisher · View at Google Scholar
  23. W. R. Broughton and G. D. Dean, Measurement Good Practice Guide No. 104: Fatigue and Creep Testing of Adhesives and Thermoplastic Joined Systems, 2007.
  24. S. Kumar and P. C. Pandey, “Fatigue life prediction of adhesively bonded single lap joints,” International Journal of Adhesion and Adhesives, vol. 31, no. 1, pp. 43–47, 2011. View at Publisher · View at Google Scholar · View at Scopus
  25. S. I. Markolefas and T. K. Papathanassiou, “Stress redistributions in adhesively bonded double-lap joints, with elastic-perfectly plastic adhesive behavior, subjected to axial lap-shear cyclic loading,” International Journal of Adhesion and Adhesives, vol. 29, no. 7, pp. 737–744, 2009. View at Publisher · View at Google Scholar · View at Scopus
  26. S. Kumar and P. C. Pandey, “Cyclic-fatigue performance of adhesively bonded lap joint,” in Computational Methods, part 1, 2, pp. 541–546, 2006.
  27. N. V. Datla, M. Papini, J. A. Schroeder, and J. K. Spelt, “Modified DCB and CLS specimens for mixed-mode fatigue testing of adhesively bonded thin sheets,” International Journal of Adhesion and Adhesives, vol. 30, no. 6, pp. 439–447, 2010. View at Publisher · View at Google Scholar · View at Scopus
  28. S. M. R. Khalili, A. Shokuhfar, S. D. Hoseini, M. Bidkhori, S. Khalili, and R. K. Mittal, “Experimental study of the influence of adhesive reinforcement in lap joints for composite structures subjected to mechanical loads,” International Journal of Adhesion and Adhesives, vol. 28, no. 8, pp. 436–444, 2008. View at Publisher · View at Google Scholar · View at Scopus
  29. B. Täljsten, C. S. Hansen, and J. W. Schmidt, “Strengthening of old metallic structures in fatigue with prestressed and non-prestressed CFRP laminates,” Construction and Building Materials, vol. 23, no. 4, pp. 1665–1677, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. A. E. Nolting, P. R. Underhill, and S. W. Dean, “Fatigue behavior of adhesively bonded aluminium double strap joints,” Journal of ASTM International, vol. 5, no. 5, p. 101559, 2008. View at Publisher · View at Google Scholar
  31. K. Ishii, M. Imanaka, H. Nakayama, and H. Kodama, “Evaluation of the fatigue strength of adhesively bonded CFRP/metal single and single-step double-lap joints,” Composites Science and Technology, vol. 59, no. 11, pp. 1675–1683, 1999. View at Publisher · View at Google Scholar · View at Scopus
  32. K. Ishii, M. Imanaka, H. Nakayama, and H. Kodama, “Fatigue failure criterion of adhesively bonded CFRP/metal joints under multiaxial stress conditions,” Composites A, vol. 29, no. 4, pp. 415–422, 1998. View at Scopus
  33. A. D. Crocombe, “Predicting the response of adhesively bonded structures under a range of service load conditions using finite element methods,” International Journal of Materials and Product Technology, vol. 14, no. 5-6, pp. 411–429, 1999. View at Scopus
  34. M. Imanaka and T. Iwata, “Estimation of fatigue strength for adhesively-bonded lap joints based on fatigue failure criterion under multiaxial stress conditions,” The Journal of Adhesion, vol. 65, no. 1–4, pp. 7–24, 1998. View at Scopus
  35. M. Dessureault and J. K. Spelt, “Observations of fatigue crack initiation and propagation in an epoxy adhesive,” International Journal of Adhesion and Adhesives, vol. 17, no. 3, pp. 183–195, 1997. View at Scopus
  36. M. Imanaka and T. Iwata, “Fatigue failure criterion of adhesively-bonded joints under combined stress conditions,” The Journal of Adhesion, vol. 59, no. 1–4, pp. 111–126, 1996. View at Scopus
  37. M. Imanaka, W. Kishimoto, K. Okita, and H. Nakayama, “Estimation of fatigue life of adhesive joints and reliability assessment,” Journal of the Society of Materials Science, Japan, vol. 39, no. 439, pp. 412–418, 1990. View at Scopus
  38. M. Imanaka, W. Kishimoto, K. Okita, and H. Nakayama, “Study on fatigue behavior of adhesive-bonded butt joint (effect of unbonded defects at adhesive/adherend interface on fatigue strength),” Journal of the Society of Materials Science, Japan, vol. 34, no. 377, pp. 134–137, 1985. View at Scopus
  39. P. Mertiny and K. Ursinus, “Damage behavior of joined fiber-reinforced polymer pipe under monotonic and cyclic loading,” in Proceedings of the ASME Pressure Vessels and Piping Conference (PVP '07), vol. 3, pp. 499–504, San Antonio, Tex, USA, July 2007. View at Publisher · View at Google Scholar
  40. E. M. Knox, M. J. Cowling, and S. A. Hashim, “Fatigue performance of adhesively bonded connections in GRE pipes,” International Journal of Fatigue, vol. 22, no. 6, pp. 513–519, 2000. View at Publisher · View at Google Scholar · View at Scopus
  41. T. Keller and M. Schollmayer, “Through-thickness performance of adhesive joints between FRP bridge decks and steel girders,” Composite Structures, vol. 87, no. 3, pp. 232–241, 2009. View at Publisher · View at Google Scholar · View at Scopus
  42. R. J. Clark and D. P. Romilly, “Bending of bonded composite repairs for aluminum aircraft structures: a design study,” Journal of Aircraft, vol. 44, no. 6, pp. 2012–2025, 2007. View at Publisher · View at Google Scholar · View at Scopus
  43. Z. Z. Gao and Z. F. Yue, “Fatigue failure of polyethylene methacrylate in adhesive assembly under unsymmetrical bending,” Theoretical and Applied Fracture Mechanics, vol. 48, no. 1, pp. 89–96, 2007. View at Publisher · View at Google Scholar · View at Scopus
  44. M. Takiguchi and F. Yoshida, “Effects of loading speed and shear prestrain on adhesive fatigue strength in single-lap joint,” Key Engineering Materials, vol. 340-341, pp. 1479–1484, 2007. View at Scopus
  45. R. R. Gomatam and E. Sancaktar, “The effects of stress state, loading frequency and cyclic waveforms on the fatigue behavior of silver-filled electronically-conductive adhesive joints,” Journal of Adhesion Science and Technology, vol. 20, no. 1, pp. 53–68, 2006. View at Publisher · View at Google Scholar · View at Scopus
  46. R. R. Gomatam and E. Sancaktar, “A novel cumulative fatigue damage model for electronically-conductive adhesive joints under variable loading,” Journal of Adhesion Science and Technology, vol. 20, no. 1, pp. 69–86, 2006. View at Publisher · View at Google Scholar · View at Scopus
  47. R. R. Gomatam and E. Sancaktar, “A comprehensive fatigue life predictive model for electronically conductive adhesive joints under constant-cycle loading,” Journal of Adhesion Science and Technology, vol. 20, no. 1, pp. 87–104, 2006. View at Publisher · View at Google Scholar · View at Scopus
  48. A. Gladkov and A. Bar-Cohen, “Parametric dependence of fatigue of electronic adhesives,” IEEE Transactions on Components and Packaging Technologies, vol. 22, no. 2, pp. 200–208, 1999. View at Publisher · View at Google Scholar · View at Scopus
  49. A. D. Crocombe and G. Richardson, “Assessing stress state and mean load effects on the fatigue response of adhesively bonded joints,” International Journal of Adhesion and Adhesives, vol. 19, no. 1, pp. 19–27, 1999. View at Scopus
  50. Z. Yang, K. Zhang, Y. Ma, and Y. Li, “Orthogonal test research on the effect of curing technology on the fatigue life of adhesive bonding of CFRP and aluminum alloy,” Advanced Materials Research, vol. 181-182, pp. 534–539, 2011. View at Publisher · View at Google Scholar
  51. K. C. Shin and J. J. Lee, “Effects of thermal residual stresses on failure of co-cured lap joints with steel and carbon fiber-epoxy composite adherends under static and fatigue tensile loads,” Composites A, vol. 37, no. 3, pp. 476–487, 2006. View at Publisher · View at Google Scholar · View at Scopus
  52. L. F. M. da Silva, N. M. A. J. Ferreira, V. Richter-Trummer, and E. A. S. Marques, “Effect of grooves on the strength of adhesively bonded joints,” International Journal of Adhesion and Adhesives, vol. 30, no. 8, pp. 735–743, 2010. View at Publisher · View at Google Scholar · View at Scopus
  53. T. Sekercioglu and V. Kovan, “Prediction of static shear force and fatigue life of adhesive joints by artificial neural network,” Kovove Materialy, vol. 46, no. 1, pp. 51–57, 2008. View at Scopus
  54. S. Azari, M. Papini, and J. K. Spelt, “Effect of surface roughness on the performance of adhesive joints under static and cyclic loading,” The Journal of Adhesion, vol. 86, no. 7, pp. 742–764, 2010. View at Publisher · View at Google Scholar · View at Scopus
  55. A. M. Pereira, J. M. Ferreira, F. V. Antunes, and P. J. Bártolo, “Study on the fatigue strength of AA 6082-T6 adhesive lap joints,” International Journal of Adhesion and Adhesives, vol. 29, no. 6, pp. 633–638, 2009. View at Publisher · View at Google Scholar · View at Scopus
  56. W.-S. Kim and J.-J. Lee, “Adhesion strength and fatigue life improvement of co-cured composite/metal lap joints by silane-based interphase formation,” Journal of Adhesion Science and Technology, vol. 21, no. 2, pp. 125–140, 2007. View at Publisher · View at Google Scholar · View at Scopus
  57. D. J. Bland, A. J. Kinloch, V. Stolojan, and J. F. Watts, “Failure mechanisms in adhesively bonded aluminium: an XPS and PEELS study,” Surface and Interface Analysis, vol. 40, no. 3-4, pp. 128–131, 2008. View at Publisher · View at Google Scholar · View at Scopus
  58. R. Bermejo, J. Oñoro, and R. García-Ledesma, “Fatigue behaviour of single overlap joints on steel and pre-painting steel with epoxy adhesive,” Revista de Metalurgia, vol. 44, no. 4, pp. 310–316, 2008. View at Scopus
  59. R. R. Gomatam and E. Sancaktar, “Effects of various adherend surface treatments on fatigue behavior of joints bonded with a silver-filled electronically conductive adhesive,” Journal of Adhesion Science and Technology, vol. 19, no. 8, pp. 659–678, 2005. View at Publisher · View at Google Scholar · View at Scopus
  60. V. Shenoy, I. A. Ashcroft, G. W. Critchlow, and A. D. Crocombe, “Unified methodology for the prediction of the fatigue behaviour of adhesively bonded joints,” International Journal of Fatigue, vol. 32, no. 8, pp. 1278–1288, 2010. View at Publisher · View at Google Scholar · View at Scopus
  61. K. B. Katnam, A. D. Crocombe, H. Khoramishad, and I. A. Ashcroft, “Load ratio effect on the fatigue behaviour of adhesively bonded joints: an enhanced damage model,” The Journal of Adhesion, vol. 86, no. 3, pp. 257–272, 2010. View at Publisher · View at Google Scholar · View at Scopus
  62. A. Graner Solana, A. D. Crocombe, and I. A. Ashcroft, “Fatigue life and backface strain predictions in adhesively bonded joints,” International Journal of Adhesion and Adhesives, vol. 30, no. 1, pp. 36–42, 2010. View at Publisher · View at Google Scholar · View at Scopus
  63. V. Shenoy, I. A. Ashcroft, G. W. Critchlow, A. D. Crocombe, and M. M. Abdel Wahab, “Strength wearout of adhesively bonded joints under constant amplitude fatigue,” International Journal of Fatigue, vol. 31, no. 5, pp. 820–830, 2009. View at Publisher · View at Google Scholar · View at Scopus
  64. J. H. Kim, B. J. Park, and Y. W. Han, “Evaluation of fatigue characteristics for adhesively-bonded composite stepped lap joint,” Composite Structures, vol. 66, no. 1–4, pp. 69–75, 2004. View at Publisher · View at Google Scholar · View at Scopus
  65. M. M. A. Wahab, I. A. Ashcroft, A. D. Crocombe, et al., “Prediction of fatigue thresholds in adhesively bonded joints using damage mechanics and fracture mechanics,” Journal of Adhesion Science and Technology, vol. 15, no. 7, pp. 763–781, 2001. View at Publisher · View at Google Scholar · View at Scopus
  66. M. M. Abdel Wahab, I. Hilmy, I. A. Ashcroft, and A. D. Crocombe, “Evaluation of fatigue damage in adhesive bonding: part 1: bulk adhesive,” Journal of Adhesion Science and Technology, vol. 24, no. 2, pp. 305–324, 2010. View at Publisher · View at Google Scholar · View at Scopus
  67. M. M. Abdel Wahab, I. Hilmy, I. A. Ashcroft, and A. D. Crocombe, “Evaluation of fatigue damage in adhesive bonding: part 2: single lap joint,” Journal of Adhesion Science and Technology, vol. 24, no. 2, pp. 325–345, 2010. View at Publisher · View at Google Scholar · View at Scopus
  68. I. Hilmy, M. M. Abdel Wahab, I. A. Ashcroft, and A. D. Crocombe, “A finite element analysis of scarf joint for controlling the triaxiality function in adhesive bonding,” Key Engineering Materials, vol. 385–387, pp. 17–20, 2008. View at Publisher · View at Google Scholar · View at Scopus
  69. M. Quaresimin and M. Ricotta, “Life prediction of bonded joints in composite materials,” International Journal of Fatigue, vol. 28, no. 10, pp. 1166–1176, 2006. View at Publisher · View at Google Scholar · View at Scopus
  70. M. Quaresimin and M. Ricotta, “Fatigue behaviour and damage evolution of single lap bonded joints in composite material,” Composites Science and Technology, vol. 66, no. 2, pp. 176–187, 2006. View at Publisher · View at Google Scholar · View at Scopus
  71. M. Imanaka, M. Taniguchi, T. Hamano, and M. Kimoto, “Fatigue life estimation of adhesively bonded scarf joints based on a continuum damage mechanics model,” Polymers and Polymer Composites, vol. 13, no. 4, pp. 359–370, 2005. View at Scopus
  72. M. Imanaka, T. Hamano, A. Morimoto, R. Ashino, and M. Kimoto, “Fatigue damage evaluation of adhesively bonded butt joints with a rubber-modified epoxy adhesive,” Journal of Adhesion Science and Technology, vol. 17, no. 7, pp. 981–994, 2003. View at Publisher · View at Google Scholar · View at Scopus
  73. M. M. A. Wahab, I. A. Ashcroft, A. D. Crocombe, and L. Joussot, “Lifetime prediction for fatigue damage in bonded joints,” Key Engineering Materials, vol. 245-246, pp. 43–50, 2003. View at Publisher · View at Google Scholar · View at Scopus
  74. D. R. Lefebvre and D. A. Dillard, “A stress singularity approach for the prediction of fatigue crack initiation in adhesive bonds. Part 1: theory,” The Journal of Adhesion, vol. 70, no. 1-2, pp. 119–138, 1999. View at Scopus
  75. D. R. Lefebvre, D. A. Dillard, and J. G. Dillard, “A stress singularity approach for the prediction of fatigue crack initiation in adhesive bonds. Part 2: experimental,” The Journal of Adhesion, vol. 70, no. 1-2, pp. 139–154, 1999. View at Publisher · View at Google Scholar · View at Scopus
  76. H. Khoramishad, A. D. Crocombe, K. B. Katnam, and I. A. Ashcroft, “A generalised damage model for constant amplitude fatigue loading of adhesively bonded joints,” International Journal of Adhesion and Adhesives, vol. 30, no. 6, pp. 513–521, 2010. View at Publisher · View at Google Scholar · View at Scopus
  77. H. Khoramishad, A. D. Crocombe, K. B. Katnam, and I. A. Ashcroft, “Predicting fatigue damage in adhesively bonded joints using a cohesive zone model,” International Journal of Fatigue, vol. 32, no. 7, pp. 1146–1158, 2010. View at Publisher · View at Google Scholar · View at Scopus
  78. V. Shenoy, I. A. Ashcroft, G. W. Critchlow, A. D. Crocombe, and M. M. Abdel Wahab, “An investigation into the crack initiation and propagation behaviour of bonded single-lap joints using backface strain,” International Journal of Adhesion and Adhesives, vol. 29, no. 4, pp. 361–371, 2009. View at Publisher · View at Google Scholar · View at Scopus
  79. A. G. Solana, A. D. Crocombe, M. M. Abdel Wahab, and I. A. Ashcroft, “Fatigue initiation in adhesively-bonded single-lap joints,” Journal of Adhesion Science and Technology, vol. 21, no. 14, pp. 1343–1357, 2007. View at Publisher · View at Google Scholar · View at Scopus
  80. J. Deng and M. M. K. Lee, “Fatigue performance of metallic beam strengthened with a bonded CFRP plate,” Composite Structures, vol. 78, no. 2, pp. 222–231, 2007. View at Publisher · View at Google Scholar · View at Scopus
  81. A. D. Crocombe, C. Y. Ong, C. M. Chan, M. M. A. Wahab, and I. A. Ashcroft, “Investigating fatigue damage evolution in adhesively bonded structures using backface strain measurement,” The Journal of Adhesion, vol. 78, no. 9, pp. 745–776, 2002. View at Publisher · View at Google Scholar · View at Scopus
  82. Z. H. Zhang, J. K. Shang, and F. V. Lawrence, “A back-face strain technique for detecting fatigue-crack initiation in adhesive joints,” The Journal of Adhesion, vol. 49, no. 1-2, pp. 23–36, 1995. View at Publisher · View at Google Scholar
  83. T. F. Capell, J. Palaniappan, S. L. Ogin et al., “The use of an embedded chirped fibre Bragg grating sensor to monitor disbond initiation and growth in adhesively bonded composite/metal single lap joints,” Journal of Optics A, vol. 9, no. 6, article S07, pp. S40–S44, 2007. View at Publisher · View at Google Scholar · View at Scopus
  84. W. S. Johnson and S. Mall, “Influence of interface ply orientation on fatigue damage of adhesively bonded composite joints,” Journal of Composites Technology and Research, vol. 8, no. 1, pp. 3–7, 1986. View at Publisher · View at Google Scholar · View at Scopus
  85. M. V. Fernández, M. F. S. F. de Moura, L. F. M. da Silva, and A. T. Marques, “Composite bonded joints under mode I fatigue loading,” International Journal of Adhesion and Adhesives, vol. 31, no. 5, pp. 280–285, 2011. View at Publisher · View at Google Scholar · View at Scopus
  86. M. M. A. Wahab, I. A. Ashcroft, A. D. Crocombe, and P. A. Smith, “Finite element prediction of fatigue crack propagation lifetime in composite bonded joints,” Composites A, vol. 35, no. 2, pp. 213–222, 2004. View at Publisher · View at Google Scholar · View at Scopus
  87. M. M. A. Wahab, I. A. Ashcroft, A. D. Crocombe, and P. A. Smith, “Fatigue crack propagation in adhesively bonded joints,” Key Engineering Materials, vol. 251-252, pp. 229–233, 2003. View at Scopus
  88. M. M. A. Wahab, I. A. Ashcroft, A. D. Crocombe, and P. A. Smith, “Numerical prediction of fatigue crack propagation lifetime in adhesively bonded structures,” International Journal of Fatigue, vol. 24, no. 6, pp. 705–709, 2002. View at Publisher · View at Google Scholar · View at Scopus
  89. F. Moroni and A. Pirondi, “A procedure for the simulation of fatigue crack growth in adhesively bonded joints based on the cohesive zone model and different mixed-mode propagation criteria,” Engineering Fracture Mechanics, vol. 78, no. 8, pp. 1808–1816, 2011. View at Publisher · View at Google Scholar · View at Scopus
  90. A. Pirondi and F. Moroni, “Simulation of mixed mode I/II fatigue crack propagation in adhesive joints with a modified cohesive zone model,” Journal of Adhesion Science and Technology, vol. 25, no. 18, pp. 2483–2499, 2011. View at Publisher · View at Google Scholar
  91. A. Pirondi and F. Moroni, “A progressive damage model for the prediction of fatigue crack growth in bonded joints,” The Journal of Adhesion, vol. 86, no. 5-6, pp. 501–521, 2010. View at Publisher · View at Google Scholar · View at Scopus
  92. K. Ishii, “Effect of substrate material on fatigue crack propagation rate of adhesively bonded DCB joints,” Journal of Adhesion Science and Technology, vol. 25, no. 20, pp. 2775–2787, 2011.
  93. S.-H. Baek, W.-S. Kim, C.-J. Jang, and J.-J. Lee, “Mixed mode fatigue characteristics of composite/metal interfaces,” Key Engineering Materials, vol. 452-453, pp. 437–440, 2011. View at Publisher · View at Google Scholar
  94. S. Giannis and R. H. Martin, “Predicting fatigue life of Glare skin-stringer configurations in aerospace panels,” Plastics, Rubber and Composites, vol. 39, no. 3–5, pp. 171–179, 2010. View at Publisher · View at Google Scholar · View at Scopus
  95. S. Azari, M. Papini, J. A. Schroeder, and J. K. Spelt, “The effect of mode ratio and bond interface on the fatigue behavior of a highly-toughened epoxy,” Engineering Fracture Mechanics, vol. 77, no. 3, pp. 395–414, 2010. View at Publisher · View at Google Scholar · View at Scopus
  96. I. A. Ashcroft, J. P. Casas-Rodriguez, and V. V. Silberschmidt, “A model to predict the anomalous fatigue crack growth behaviour seen in mixed mechanism fracture,” The Journal of Adhesion, vol. 86, no. 5-6, pp. 522–538, 2010. View at Publisher · View at Google Scholar · View at Scopus
  97. A. Pirondi and F. Moroni, “An investigation of fatigue failure prediction of adhesively bonded metal/metal joints,” International Journal of Adhesion and Adhesives, vol. 29, no. 8, pp. 796–805, 2009. View at Publisher · View at Google Scholar · View at Scopus
  98. H. M. Diab, Z. Wu, and K. Iwashita, “Theoretical solution for fatigue debonding growth and fatigue life prediction of FRP-concrete interfaces,” Advances in Structural Engineering, vol. 12, no. 6, pp. 781–792, 2009. View at Publisher · View at Google Scholar · View at Scopus
  99. G. V. Marannano, L. Mistretta, A. Cirello, and S. Pasta, “Crack growth analysis at adhesive-adherent interface in bonded joints under mixed mode I/II,” Engineering Fracture Mechanics, vol. 75, no. 18, pp. 5122–5133, 2008. View at Publisher · View at Google Scholar · View at Scopus
  100. A. Pirondi and G. Nicoletto, “Mixed mode I/II fatigue crack growth in adhesive joints,” Engineering Fracture Mechanics, vol. 73, no. 16, pp. 2557–2568, 2006. View at Publisher · View at Google Scholar · View at Scopus
  101. P. T. Cheuk, L. Tong, A. N. Rider, and J. Wang, “Analysis of energy release rate for fatigue cracked metal-to-metal double-lap shear joints,” International Journal of Adhesion and Adhesives, vol. 25, no. 2, pp. 181–191, 2005. View at Publisher · View at Google Scholar · View at Scopus
  102. X. X. Xu, A. D. Crocombe, and P. A. Smith, “Mixed-mode fatigue and fracture behaviour of joints bonded with either filled or filled and toughened adhesive,” International Journal of Fatigue, vol. 17, no. 4, pp. 279–286, 1995. View at Scopus
  103. F. C. Edde and Y. Verreman, “Nominally Constant strain-energy release rate specimen for the study of mode II fracture and fatigue in adhesively bonded joints,” International Journal of Adhesion and Adhesives, vol. 15, no. 1, pp. 29–32, 1995. View at Publisher · View at Google Scholar
  104. M.-P. Moutrille, X. Balandraud, M. Grédiac, K. Derrien, and D. Baptiste, “Applying thermoelasticity to study stress relief and crack propagation in aluminium specimens patched with composite material,” Journal of Strain Analysis for Engineering Design, vol. 43, no. 6, pp. 423–433, 2008. View at Publisher · View at Google Scholar · View at Scopus
  105. S. Azari, M. Papini, J. A. Schroeder, and J. K. Spelt, “Fatigue threshold behavior of adhesive joints,” International Journal of Adhesion and Adhesives, vol. 30, no. 3, pp. 145–159, 2010. View at Publisher · View at Google Scholar · View at Scopus
  106. M. Kayupov and Y. A. Dzenis, “Stress concentrations caused by bond cracks in single-lap adhesive composite joints,” Composite Structures, vol. 54, no. 2-3, pp. 215–220, 2001. View at Publisher · View at Google Scholar · View at Scopus
  107. Y. Guo, S. L. Ogin, T. F. Capell et al., “Effect of disbond propagation on the reflected spectra of CFBG sensors embedded within the bond-line of composite bonded joints,” Advanced Materials Research, vol. 79–82, pp. 2067–2070, 2009.
  108. P. T. Cheuk, L. Tong, C. H. Wang, A. Baker, and P. Chalkley, “Fatigue crack growth in adhesively bonded composite-metal double-lap joints,” Composite Structures, vol. 57, no. 1–4, pp. 109–115, 2002. View at Publisher · View at Google Scholar · View at Scopus
  109. T. R. Brussat and S. T. Chiu, “Fatigue crack growth of bondline cracks in structural bonded joints,” Journal of Engineering Materials and Technology, vol. 100, no. 1, pp. 39–45, 1978. View at Scopus
  110. J. P. Casas-Rodriguez, I. A. Ashcroft, and V. V. Silberschmidt, “Propagation of delamination zones in bonded joints,” Proceedings of the Estonian Academy of Sciences, vol. 56, no. 2, pp. 170–176, 2007. View at Scopus
  111. I. A. Ashcroft, S. Erpolat, and J. Tyrer, “Damage assessment in bonded composite joints,” Key Engineering Materials, vol. 245-246, pp. 501–508, 2003. View at Publisher · View at Google Scholar · View at Scopus
  112. T. Du, M. Liu, S. Seghi, K. J. Hsia, J. Economy, and J. K. Shang, “Piezoelectric actuation of fatigue crack growth along polymer/metal interface,” in Long Term Durability of Structural Materials: Durability 2000, pp. 187–192, 2001.
  113. K. Ishii, M. Imanaka, and H. Nakayama, “Fatigue crack propagation behavior of adhesively-bonded CFRP/aluminum joints,” Journal of Adhesion Science and Technology, vol. 21, no. 2, pp. 153–167, 2007. View at Publisher · View at Google Scholar · View at Scopus
  114. M. M. Abou-Hamda, M. M. Megahed, and M. M. I. Hammouda, “Fatigue crack growth in double cantilever beam specimen with an adhesive layer,” Engineering Fracture Mechanics, vol. 60, no. 5-6, pp. 605–614, 1998. View at Scopus
  115. A. Pirondi and G. Nicoletto, “Fatigue crack growth in bonded DCB specimens,” Engineering Fracture Mechanics, vol. 71, no. 4–6, pp. 859–871, 2004. View at Publisher · View at Google Scholar · View at Scopus
  116. X. X. Xu, A. D. Crocombe, and P. A. Smith, “Fatigue crack growth rates in adhesive joints tested at different frequencies,” The Journal of Adhesion, vol. 58, no. 3-4, pp. 191–204, 1996. View at Scopus
  117. H. Aglan and Z. Abdo, “An innovative approach to fatigue disbond propagation in adhesive joints,” Journal of Adhesion Science and Technology, vol. 10, no. 3, pp. 183–198, 1996. View at Scopus
  118. X. X. Xu, A. D. Crocrombe, and P. A. Smith, “Fatigue behaviour of joints bonded with either filled, or filled and toughened, adhesive,” International Journal of Fatigue, vol. 16, no. 7, pp. 469–477, 1994. View at Publisher · View at Google Scholar · View at Scopus
  119. X. X. Xu, A. D. Crocombe, and P. A. Smith, “Frequency effect on fatigue-crack growth-rate in joints bonded with either filled or filled and toughened adhesive,” Vide Science Technique et Applications, vol. 272, pp. 232–236, 1994.
  120. Y. Zhang, A. P. Vassilopoulos, and T. Keller, “Fracture of adhesively-bonded pultruded GFRP joints under constant amplitude fatigue loading,” International Journal of Fatigue, vol. 32, no. 7, pp. 979–987, 2010. View at Publisher · View at Google Scholar · View at Scopus
  121. A. J. Kinloch and S. O. Osiyemi, “Predicting the fatigue life of adhesively-bonded joints,” The Journal of Adhesion, vol. 43, no. 1-2, pp. 79–90, 1993. View at Publisher · View at Google Scholar
  122. H. Khoramishad, A. D. Crocombe, K. B. Katnam, and I. A. Ashcroft, “Fatigue damage modelling of adhesively bonded joints under variable amplitude loading using a cohesive zone model,” Engineering Fracture Mechanics, vol. 78, no. 18, pp. 3212–3225, 2011. View at Publisher · View at Google Scholar
  123. M. Eskandarian and R. M. Jennings, “A new test methodology for simultaneous assessment of monotonic and fatigue behaviors of adhesive joints,” Journal of Adhesion Science and Technology, vol. 25, no. 18, pp. 2501–2520, 2011. View at Publisher · View at Google Scholar
  124. A. H. Al-Ghamdi, I. A. Ashcroft, A. D. Crocombe, and M. M. Abdel-Wahab, “Crack growth in adhesively bonded joints subjected to variable frequency fatigue loading,” The Journal of Adhesion, vol. 79, no. 12, pp. 1161–1182, 2003. View at Scopus
  125. V. Shenoy, I. A. Ashcroft, G. W. Critchlow, and A. D. Crocombe, “Fracture mechanics and damage mechanics based fatigue lifetime prediction of adhesively bonded joints subjected to variable amplitude fatigue,” Engineering Fracture Mechanics, vol. 77, no. 7, pp. 1073–1090, 2010. View at Publisher · View at Google Scholar · View at Scopus
  126. V. Shenoy, I. A. Ashcroft, G. W. Critchlow, A. D. Crocombe, and M. M. Abdel Wahab, “An evaluation of strength wearout models for the lifetime prediction of adhesive joints subjected to variable amplitude fatigue,” International Journal of Adhesion and Adhesives, vol. 29, no. 6, pp. 639–649, 2009. View at Publisher · View at Google Scholar · View at Scopus
  127. A. E. Nolting, P. R. Underhill, and D. L. DuQuesnay, “Variable amplitude fatigue of bonded aluminum joints,” International Journal of Fatigue, vol. 30, no. 1, pp. 178–187, 2008. View at Publisher · View at Google Scholar · View at Scopus
  128. I. A. Ashcroft, “A simple model to predict crack growth in bonded joints and laminates under variable-amplitude fatigue,” Journal of Strain Analysis for Engineering Design, vol. 39, no. 6, pp. 707–716, 2004. View at Publisher · View at Google Scholar · View at Scopus
  129. S. Erpolat, I. A. Ashcroft, A. D. Crocombe, and M. M. Abdel-Wahab, “Fatigue crack growth acceleration due to intermittent overstressing in adhesively bonded CFRP joints,” Composites A, vol. 35, no. 10, pp. 1175–1183, 2004. View at Publisher · View at Google Scholar · View at Scopus
  130. I. A. Ashcroft, J. P. Casas-Rodriguez, and V. V. Silberschmidt, “Fatigue crack growth in adhesively bonded joints with intermittent impacts,” Key Engineering Materials, vol. 452-453, pp. 5–8, 2011. View at Publisher · View at Google Scholar
  131. I. A. Ashcroft, V. V. Silberschmidt, B. Echard, and J. Pablo Casas Rodriguez, “Crack propagation in a toughened epoxy adhesive under repeated impacts,” Shock and Vibration, vol. 18, no. 1-2, pp. 157–170, 2011. View at Publisher · View at Google Scholar · View at Scopus
  132. G. Tsigkourakos, J. P. Casas-Rodriguez, and V. V. Silberschmidt, “Analysis of damage propagation in single lap joints in impact fatigue,” Vibro-Impact Dynamics of Ocean Systems and Related Problems, vol. 44, pp. 247–257, 2009. View at Publisher · View at Google Scholar
  133. V. V. Silberschmidt, J. P. Casas-Rodriguez, and I. A. Ashcroft, “Impact fatigue of adhesive joints,” Key Engineering Materials, vol. 399, pp. 71–78, 2009. View at Publisher · View at Google Scholar · View at Scopus
  134. J. P. Casas-Rodriguez, I. A. Ashcroft, and V. V. Silberschmidt, “Damage in adhesively bonded CFRP joints: sinusoidal and impact-fatigue,” Composites Science and Technology, vol. 68, no. 13, pp. 2663–2670, 2008. View at Publisher · View at Google Scholar · View at Scopus
  135. J. P. Casas-Rodriguez, I. A. Ashcroft, and V. V. Silberschmidt, “Delamination in adhesively bonded CFRP joints: standard fatigue, impact-fatigue and intermittent impact,” Composites Science and Technology, vol. 68, no. 12, pp. 2401–2409, 2008. View at Publisher · View at Google Scholar · View at Scopus
  136. J. P. Casas-Rodriguez, I. A. Ashcroft, and V. V. Silberschmidt, “Damage evolution in adhesive joints subjected to impact fatigue,” Journal of Sound and Vibration, vol. 308, no. 3-5, pp. 467–478, 2007. View at Publisher · View at Google Scholar · View at Scopus
  137. J. P. Casas-Rodriguez, I. A. Ashcroft, and V. V. Silberschmidt, “Effect of impact-fatigue on damage in adhesive joints,” Key Engineering Materials, vol. 347, pp. 653–658, 2007. View at Publisher · View at Google Scholar · View at Scopus
  138. I. A. Ashcroft, J. P. Casas-Rodriguez, and V. V. Silberschmidt, “Mixed-mode crack growth in bonded composite joints under standard and impact-fatigue loading,” Journal of Materials Science, vol. 43, no. 20, pp. 6704–6713, 2008. View at Publisher · View at Google Scholar · View at Scopus
  139. V. V. Silberschmidt, J. P. Casas-Rodriguez, and I. A. Ashcroft, “Impact fatigue in adhesive joints,” Proceedings of the Institution of Mechanical Engineers C, vol. 222, no. 10, pp. 1981–1994, 2008. View at Publisher · View at Google Scholar · View at Scopus
  140. M. Imanaka, W. Kishimoto, K. Okita, H. Nakayama, and M. Shirato, “On the impact fatigue strength of adhesive-bonded lap joint,” Journal of the Society of Materials Science, Japan, vol. 34, no. 386, pp. 1296–1300, 1985. View at Scopus
  141. M. Imanaka, W. Kishimoto, K. Okita, and H. Nakayama, “On the impact fatigue behavior of adhesive-bonded butt joint,” Journal of the Society of Materials Science, Japan, vol. 32, no. 358, pp. 796–801, 1983. View at Scopus
  142. B. W. Barber and D. W. Radford, “Impact-fatigue behavior of composite tube/metal end fitting bonded joints,” Composites Engineering, vol. 5, no. 8, pp. 995–1009, 1995. View at Scopus
  143. L.-L. Gao, L. Wang, H. Gao, G. Chen, and X. Chen, “Fatigue life evaluation of anisotropic conductive adhesive film joints under mechanical and hygrothermal loads,” Microelectronics Reliability, vol. 51, no. 8, pp. 1393–1397, 2011. View at Publisher · View at Google Scholar · View at Scopus
  144. Y. S. Chan, F. Song, and S. W. R. Lee, “Investigation on lead-free solder joint reliability of edge-bonded CBGA under temperature cycling,” in Proceedings of the 12th International Conference on Electronic Packaging Technology & High Density Packaging (ICEPT-HDP '11), pp. 1–6, August 2011. View at Publisher · View at Google Scholar
  145. Q. Yu, M. Shiratori, and T. Mori, “Nonsteady thermal stress analysis and thermal fatigue strength of metal-CFRP bonded joints,” JSME International Journal A, vol. 36, no. 1, pp. 43–49, 1993. View at Scopus
  146. N. V. Datla, M. Papini, J. Ulicny, B. Carlson, and J. K. Spelt, “The effects of test temperature and humidity on the mixed-mode fatigue behavior of a toughened adhesive aluminum joint,” Engineering Fracture Mechanics, vol. 78, no. 6, pp. 1125–1139, 2011. View at Publisher · View at Google Scholar · View at Scopus
  147. R. R. Gomatam and E. Sancaktar, “Fatigue and failure behaviors of silver-filled electronically-conductive adhesive joints subjected to elevated humidity,” Journal of Adhesion Science and Technology, vol. 18, no. 15-16, pp. 1833–1848, 2004. View at Publisher · View at Google Scholar · View at Scopus
  148. R. R. Gomatam and E. Sancaktar, “Modeling fatigue behavior of electronically conductive adhesive joints under elevated temperature and humidity conditions,” in Proceedings of the 4th IEEE International Conference on Polymers and Adhesives in Microelectronics and Photonics, pp. 14–26, September 2004. View at Scopus
  149. A. J. Kinloch, M. S. G. Little, and J. F. Watts, “The role of the interphase in the environmental failure of adhesive joints,” Acta Materialia, vol. 48, no. 18-19, pp. 4543–4553, 2000. View at Publisher · View at Google Scholar · View at Scopus
  150. Z. Abdo and H. Aglan, “Analysis of aircraft adhesive joints under combined thermal and mechanical cyclic loadings,” Journal of Adhesion Science and Technology, vol. 11, no. 7, pp. 941–956, 1997. View at Scopus
  151. R. V. Valentin, L. M. Butkus, and W. S. Johnson, “A finite element and experimental evaluation of boron-epoxy doublers bonded to an aluminum substrate,” Journal of Composites Technology and Research, vol. 20, no. 2, pp. 108–119, 1998. View at Scopus
  152. R. A. Dickie, L. P. Haack, J. K. Jethwa, A. J. Kinloch, and J. F. Watts, “The fatigue and durability behaviour of automotive adhesives. Part II: failure mechanisms,” The Journal of Adhesion, vol. 66, no. 1–4, pp. 1–37, 1998. View at Publisher · View at Google Scholar · View at Scopus
  153. A. J. Curley, J. K. Jethwa, A. J. Kinloch, and A. C. Taylor, “The fatigue and durability behaviour of automotive adhesives. Part III: predicting the service life,” The Journal of Adhesion, vol. 66, no. 1–4, pp. 39–59, 1998. View at Scopus
  154. J. K. Jethwa and A. J. Kinloch, “The fatigue and durability behaviour of automotive adhesives. Part I: fracture mechanics tests,” The Journal of Adhesion, vol. 61, no. 1–4, pp. 71–95, 1997. View at Scopus
  155. M. Fernando, W. W. Harjoprayitno, and A. J. Kinloch, “A fracture mechanics study of the influence of moisture on the fatigue behaviour of adhesively bonded aluminium-alloy joints,” International Journal of Adhesion and Adhesives, vol. 16, no. 2, pp. 113–119, 1996. View at Publisher · View at Google Scholar · View at Scopus
  156. E. Lachmann, “Durability of bonded metal joints in motor-vehicle construction,” Vide Science Technique et Applications, vol. 272, pp. 277–283, 1994.
  157. H. W. So, N. N. S. Chen, and P. I. F. Niem, “Fatigue performance of adhesive joints immersed in different solutions,” The Journal of Adhesion, vol. 44, no. 4, pp. 245–256, 1994. View at Publisher · View at Google Scholar
  158. Y. Zhang, A. P. Vassilopoulos, and T. Keller, “Environmental effects on fatigue behavior of adhesively-bonded pultruded structural joints,” Composites Science and Technology, vol. 69, no. 7-8, pp. 1022–1028, 2009. View at Publisher · View at Google Scholar · View at Scopus
  159. G. Neser and E. Altunsaray, “The effcts of seawater environment, material direction and thickness on the fatigue performance of adhesively bonded and bolted joints of non-crimp GRP structures,” Advanced Composites Letters, vol. 15, no. 4, pp. 127–137, 2006. View at Scopus
  160. I. A. Ashcroft, D. J. Hughes, and S. J. Shaw, “Adhesive bonding of fibre reinforced polymer composite materials,” Assembly Automation, vol. 20, no. 2, pp. 150–161, 2000. View at Scopus
  161. P. N. Reis, J. A. M. Ferreira, J. D. M. Costa, and M. O. W. Richardson, “Fatigue of thermoplastic composites adhesive lap joints,” in Advances in Mechanical Behaviour, Plasticity and Damage: Proceedings of Euromat 2000, vol. 1-2, pp. 237–242, 2000.
  162. M. N. Charalambides, R. Hardouin, A. J. Kinloch, and F. L. Matthews, “Adhesively-bonded repairs to fibre-composite materials I: experimental,” Composites A, vol. 29, no. 11, pp. 1371–1381, 1998. View at Scopus
  163. L. M. Butkus, R. V. Valentin, and W. S. Johnson, “Durability issues in bonded joint design,” in Proceedings of the 19th Symposium of the International Committee on Aeronautical Fatigue (ICAF '97), vol. 2, pp. 843–854, Edinburgh, Scotland, June 1997.
  164. A. S. Crasto and R. Y. Kim, “Environmental durability of a composite-to-composite adhesive bond in infrastructure applications,” in Proceedings of the 28th International SAMPE Technical Conference, pp. 837–849, November 1996. View at Scopus
  165. R. B. Gilmore and S. J. Shaw, “The effect of temperature and humidity on the fatigue behaviour of composite bonded joints,” Composites Bonding, American Society for Testing and Materials Special Technical Publication, 1227, pp. 82–95, 1994.
  166. S. Okuda, S. Nishina, and T. Watanabe, “Tensile fatigue behavior of adhesive bonded joint of FRP in water,” Journal of the Society of Materials Science, Japan, vol. 34, no. 376, pp. 87–92, 1985. View at Scopus
  167. H. Miyairi, A. Muramatsu, and H. Fukuda, “Fatigue strength and endurance of adhesive-bonded joints,” Journal of the Society of Materials Science, Japan, vol. 24, no. 266, pp. 1051–1056, 1975. View at Scopus
  168. A. J. Curley, H. Hadavinia, A. J. Kinloch, and A. C. Taylor, “Predicting the service-life of adhesively-bonded joints,” International Journal of Fracture, vol. 103, no. 1, pp. 41–69, 2000. View at Publisher · View at Google Scholar · View at Scopus
  169. W. S. Johnson and L. M. Butkus, “Considering environmental conditions in the design of bonded structures: a fracture mechanics approach,” Fatigue & Fracture of Engineering Materials & Structures, vol. 21, no. 4, pp. 465–478, 1998. View at Scopus
  170. I. A. Ashcroft, M. M. A. Wahab, and A. D. Crocombe, “Predicting degradation in bonded composite joints using a semi-coupled finite-element method,” Mechanics of Advanced Materials and Structures, vol. 10, no. 3, pp. 227–248, 2003. View at Publisher · View at Google Scholar · View at Scopus
  171. M. M. Abdel Wahab, I. A. Ashcroft, A. D. Crocombe, and S. J. Shaw, “Diffusion of moisture in adhesively bonded joints,” The Journal of Adhesion, vol. 77, no. 1, pp. 43–80, 2001. View at Publisher · View at Google Scholar · View at Scopus
  172. M. M. A. Wahab, I. A. Ashcroft, A. D. Crocombe, D. J. Hughes, and S. J. Shaw, “The effect of environment on the fatigue of bonded composite joints. Part 2: fatigue threshold prediction,” Composites A, vol. 32, no. 1, pp. 59–69, 2001. View at Publisher · View at Google Scholar · View at Scopus
  173. M. D. Banea and L. F. M. da Silva, “Static and fatigue behaviour of room temperature vulcanising silicone adhesives for high temperature aerospace applications,” Materialwissenschaft und Werkstofftechnik, vol. 41, no. 5, pp. 325–335, 2010. View at Publisher · View at Google Scholar · View at Scopus
  174. M. D. Banea and L. F. M. da Silva, “Mechanical characterization of flexible adhesives,” The Journal of Adhesion, vol. 85, no. 4-5, pp. 261–285, 2009. View at Publisher · View at Google Scholar · View at Scopus
  175. T. Hattori, “Fatigue strength of FRP/metal adhesive joints under low temperature,” in Proceedings of the 4th International Conference on High Performance Structures and Materials, May 2008. View at Publisher · View at Google Scholar
  176. H. Y. Hwang and D. G. Lee, “Temperature effects on the torsional fatigue characteristics of adhesively bonded tubular single-lap joints,” Journal of Adhesion Science and Technology, vol. 18, no. 4, pp. 413–425, 2004. View at Publisher · View at Google Scholar · View at Scopus
  177. K. M. Liechti, G. A. Arzoumanidis, and S. J. Park, “Fatigue fracture of fully saturated bonded joints,” The Journal of Adhesion, vol. 78, no. 5, pp. 383–411, 2002. View at Publisher · View at Google Scholar · View at Scopus
  178. I. A. Ashcroft and S. J. Shaw, “Mode I fracture of epoxy bonded composite joints 2. Fatigue loading,” International Journal of Adhesion and Adhesives, vol. 22, no. 2, pp. 151–167, 2002. View at Publisher · View at Google Scholar · View at Scopus
  179. I. A. Ashcroft, D. J. Hughes, S. J. Shaw, M. A. Wahab, and A. Crocombe, “Effect of temperature on the quasi-static strength and fatigue resistance of bonded composite double lap joints,” The Journal of Adhesion, vol. 75, no. 1, pp. 61–88, 2001. View at Scopus
  180. I. A. Ashcroft, M. M. A. Wahab, A. D. Crocombe, D. J. Hughes, and S. J. Shaw, “The effect of environment on the fatigue of bonded composite joints. Part 1: testing and fractography,” Composites A, vol. 32, no. 1, pp. 45–58, 2001. View at Publisher · View at Google Scholar · View at Scopus
  181. H. Aglan, T. Rowell, T. Ahmed, and R. Thomas, “Durability assessment of composite repairs bonded to aircraft structures,” Journal of Adhesion Science and Technology, vol. 13, no. 1, pp. 127–148, 1999. View at Scopus
  182. J. A. Harris and P. A. Fay, “Fatigue life evaluation of structural adhesives for automative applications,” International Journal of Adhesion and Adhesives, vol. 12, no. 1, pp. 9–18, 1992. View at Scopus
  183. P. R. Underhill, A. N. Rider, and D. L. Duquesnay, “The effect of warm water surface treatments on the fatigue life in shear of aluminum joints,” International Journal of Adhesion and Adhesives, vol. 26, no. 4, pp. 199–205, 2006. View at Publisher · View at Google Scholar · View at Scopus
  184. M. L. Abel, A. N. N. Adams, A. J. Kinloch, S. J. Shaw, and J. F. Watts, “The effects of surface pretreatment on the cyclic-fatigue characteristics of bonded aluminium-alloy joints,” International Journal of Adhesion and Adhesives, vol. 26, no. 1-2, pp. 50–61, 2006. View at Publisher · View at Google Scholar · View at Scopus
  185. P. R. Underhill and D. L. Duquesnay, “The dependence of the fatigue life of adhesive joints on surface preparation,” International Journal of Adhesion and Adhesives, vol. 26, no. 1-2, pp. 62–66, 2006. View at Publisher · View at Google Scholar · View at Scopus
  186. M. W. Rushforth, P. Bowen, E. McAlpine, X. Zhou, and G. E. Thompson, “The effect of surface pretreatment and moisture on the fatigue performance of adhesively-bonded aluminium,” Journal of Materials Processing Technology, vol. 153-154, no. 1–3, pp. 359–365, 2004. View at Publisher · View at Google Scholar · View at Scopus
  187. H. Hadavinia, A. J. Kinloch, M. S. G. Little, and A. C. Taylor, “The prediction of crack growth in bonded joints under cyclic-fatigue loading I. Experimental studies,” International Journal of Adhesion and Adhesives, vol. 23, no. 6, pp. 449–461, 2003. View at Publisher · View at Google Scholar · View at Scopus
  188. H. Hadavinia, A. J. Kinloch, M. S. G. Little, and A. C. Taylor, “The prediction of crack growth in bonded joints under cyclic-fatigue loading II. Analytical and finite element studies,” International Journal of Adhesion and Adhesives, vol. 23, no. 6, pp. 463–471, 2003. View at Publisher · View at Google Scholar · View at Scopus
  189. G. C. Mays and A. E. Vardy, “Fatigue performance and durability of epoxy resin bonded metal lap joints,” in Proceedings of the International Conference on Fatigue in Polymers, London, UK, June 1983.
  190. P. Portillo, J. Kreiner, and T. Lancey, “Torsional fatigue behavior of adhesively joined tubes,” Journal of Materials Processing Technology, vol. 191, no. 1–3, pp. 339–341, 2007. View at Publisher · View at Google Scholar · View at Scopus
  191. N. Tomioka and M. Kakiage, “Evaluation of fatigue strength of adhesive bonded box section beams,” in Advances in Fracture Research, vol. 1–6, pp. 1717–1724, 1997.
  192. J. W. Kwon and D. G. Lee, “The effects of surface roughness and bond thickness on the fatigue life of adhesively bonded tubular single lap joints,” Journal of Adhesion Science and Technology, vol. 14, no. 8, pp. 1085–1102, 2000. View at Scopus
  193. H. Nayeb-Hashemi, J. N. Rossettos, and A. P. Melo, “Multiaxial fatigue life evaluation of tubular adhesively bonded joints,” International Journal of Adhesion and Adhesives, vol. 17, no. 1, pp. 55–63, 1997. View at Publisher · View at Google Scholar · View at Scopus
  194. V. Prakash, C. M. Chen, A. Engelhard, and G. Powell, “Torsional fatigue test for adhesive bonded butt joints,” Journal of Testing and Evaluation, vol. 23, no. 3, pp. 228–230, 1995. View at Scopus
  195. S. Hurme, A. Oinonen, and G. Marquis, “Fatigue of bonded steel interfaces under cyclic shear loading and static normal stress,” Engineering Fracture Mechanics, vol. 78, no. 8, pp. 1644–1656, 2011. View at Publisher · View at Google Scholar · View at Scopus
  196. C.-T. Hoang-Ngoc and E. Paroissien, “Simulation of single-lap bonded and hybrid (bolted/bonded) joints with flexible adhesive,” International Journal of Adhesion and Adhesives, vol. 30, no. 3, pp. 117–129, 2010. View at Publisher · View at Google Scholar · View at Scopus
  197. G. Kelly, “Quasi-static strength and fatigue life of hybrid (bonded/bolted) composite single-lap joints,” Composite Structures, vol. 72, no. 1, pp. 119–129, 2006. View at Publisher · View at Google Scholar · View at Scopus
  198. S. Sam and M. Shome, “Static and fatigue performance of weld bonded dual phase steel sheets,” Science and Technology of Welding & Joining, vol. 15, no. 3, pp. 242–247, 2010. View at Publisher · View at Google Scholar · View at Scopus
  199. V. M. Gonçalves and P. A. F. Martins, “Static and fatigue performance of weld-bonded stainless steel joints,” Materials and Manufacturing Processes, vol. 21, no. 8, pp. 774–778, 2006. View at Publisher · View at Google Scholar · View at Scopus
  200. P. K. Ghosh and M. Balaram, “Improvement in spot weld properties of steel sheet by weldbonding using particulate composite adhesive,” Transactions of the Indian Institute of Metals, vol. 58, no. 1, pp. 115–131, 2005. View at Scopus
  201. P. K. Ghosh and Vivek, “Weldbonding of stainless steel,” ISIJ International, vol. 43, no. 1, pp. 85–94, 2003. View at Scopus
  202. B. H. Chang, Y. W. Shi, and L. Q. Lu, “Studies on the stress distribution and fatigue behavior of weld-bonded lap shear joints,” Journal of Materials Processing Technology, vol. 108, no. 3, pp. 307–313, 2001. View at Publisher · View at Google Scholar · View at Scopus
  203. M. Ring-Groth, C. Magnusson, and J. Powell, “The fatigue properties of weldbonded stainless steel joints,” Journal of Advanced Materials, vol. 32, no. 1, pp. 21–27, 2000. View at Scopus
  204. D. Hejcman, J. F. Knott, P. Bowen, and C. L. Davis, “Fatigue of welded and adhesively bonded aluminium alloys for use in automotive applications,” in Proceedings of the 11th Biennial European Conference on Fracture—Mechanisms and Mechanics of Damage and Failure (ECF '11), vol. 3, pp. 1665–1670, September 1996.
  205. P. C. Wang, S. K. Chisholm, G. Banas, and F. V. Lawrence, “The role of failure mode, resistance spot weld and adhesive on the fatigue behavior of weld/bonded aluminum,” Welding Journal, vol. 74, no. 2, pp. S41–S47, 1995. View at Scopus
  206. M. D. Gilchrist and R. A. Smith, “Fatigue and fracture of adhesively bonded and welded/bonded T-peel joints,” Fracture Mechanics: 25Th Volume, American Society for Testing and Materials Special Technical Publication, 1220, pp. 222–238, 1995.
  207. M. D. Gilchrist and R. A. Smith, “Fatigue growth of cohesive defects in T-peel joints,” The Journal of Adhesion, vol. 42, no. 3, pp. 179–190, 1993. View at Scopus
  208. M. D. Gilchrist and R. A. Smith, “Development of cohesive fatigue cracks in T-peel joints,” International Journal of Adhesion and Adhesives, vol. 13, no. 1, pp. 53–57, 1993. View at Scopus
  209. K. R. Wentz and H. F. Wolfe, “Development of random fatigue data for adhesively bonded and weld/bonded structures subjected to dynamic excitation,” Journal of Engineering Materials and Technology, vol. 100, no. 1, pp. 70–76, 1978. View at Scopus
  210. M. E. Somervuori, M. T. Alenius, T. Kosonen, R. Karppi, and H. E. Hänninen, “Corrosion fatigue of weld-bonded austenitic stainless steels in 3.5% NaCl solution,” Materials and Corrosion, vol. 57, no. 7, pp. 562–567, 2006. View at Publisher · View at Google Scholar · View at Scopus
  211. P. C. Wang, P. Mabery, and C. K. Chisholm, “Degradation of fatigue properties of welded/bonded aluminum exposed to moisture and elevated-temperature,” The Journal of Adhesion, vol. 43, no. 1-2, pp. 121–137, 1993. View at Publisher · View at Google Scholar
  212. G. di Franco, L. Fratini, and A. Pasta, “Fatigue strength of a single lap joint SPR-bonded,” in Proceedings of the 14th International ESAFORM Conference on Material Forming (ESAFORM '11), vol. 1353 of AIP Conference Proceedings, pp. 1265–1271, May 2011.
  213. F. Moroni, A. Pirondi, and F. Kleiner, “Experimental analysis and comparison of the strength of simple and hybrid structural joints,” International Journal of Adhesion and Adhesives, vol. 30, no. 5, pp. 367–379, 2010. View at Publisher · View at Google Scholar · View at Scopus
  214. A. Kwakernaak and J. C. J. Hofsiede, “Adhesive bonding: providing improved fatigue resistance and damage tolerance at lower costs,” SAMPE Journal, vol. 44, no. 5, pp. 6–15, 2008. View at Scopus
  215. M. Imanaka, K. Haraga, and T. Nishikawa, “Fatigue-strength of adhesive rivet combined lap joints,” The Journal of Adhesion, vol. 49, no. 3-4, pp. 197–209, 1995.
  216. D. Croccolo, M. de Agostinis, and N. Vincenzi, “Experimental analysis of static and fatigue strength properties in press-fitted and adhesively bonded steel-aluminium components,” Journal of Adhesion Science and Technology, vol. 25, no. 18, pp. 2521–2538, 2011. View at Publisher · View at Google Scholar
  217. D. Croccolo, M. de Agostinis, and N. Vincenzi, “How to improve static and fatigue strength in press-fitted joints using anaerobic adhesive,” Proceedings of the Institution of Mechanical Engineers C, vol. 225, no. 12, pp. 2792–2803, 2011. View at Publisher · View at Google Scholar
  218. D. Croccolo, M. de Agostinis, and N. Vincenzi, “Static and dynamic strength evaluation of interference fit and adhesively bonded cylindrical joints,” International Journal of Adhesion and Adhesives, vol. 30, no. 5, pp. 359–366, 2010. View at Publisher · View at Google Scholar · View at Scopus
  219. E. Dragoni, “Fatigue testing of taper press fits bonded with anaerobic adhesives,” The Journal of Adhesion, vol. 79, no. 8-9, pp. 729–747, 2003. View at Publisher · View at Google Scholar · View at Scopus
  220. Z. Liu and D. Ho Bae, “A study on joining technology of aluminum alloy sheet using nano-adhesives,” International Journal of Modern Physics B, vol. 25, no. 31, pp. 4265–4268, 2011. View at Publisher · View at Google Scholar
  221. A. Dorigato and A. Pegoretti, “The role of alumina nanoparticles in epoxy adhesives,” Journal of Nanoparticle Research, vol. 13, no. 6, pp. 2429–2441, 2011. View at Publisher · View at Google Scholar · View at Scopus
  222. S. Ho Yoon and D. Gil Lee, “In situ crack propagation monitoring in tubular adhesive joints containing quartz nano-particles,” Journal of Adhesion Science and Technology, vol. 25, no. 16, pp. 1973–1985, 2011. View at Publisher · View at Google Scholar
  223. S. Bhowmik, R. Benedictus, J. A. Poulis, H. W. Bonin, and V. T. Bui, “High-performance nanoadhesive bonding of space-durable polymer and its performance under space environments,” Journal of Spacecraft and Rockets, vol. 46, no. 1, pp. 218–224, 2009. View at Publisher · View at Google Scholar · View at Scopus