About this Journal Submit a Manuscript Table of Contents
ISRN Materials Science
Volume 2013 (2013), Article ID 536069, 8 pages
http://dx.doi.org/10.1155/2013/536069
Research Article

Process of Identifying Stress Fields from Strain Fields in the Specimen with a Hole

1Department of Material Engineering, Faculty of Metallurgy and Materials Engineering, VŠB-Technical University of Ostrava, 17. Listopadu 15, Poruba, 708 33 Ostrava, Czech Republic
2Department of Non-Ferrous Metals, Refining and Recycling, Faculty of Metallurgy and Materials Engineering, VŠB-Technical University of Ostrava, 17. Listopadu 15/2172, Poruba, 708 33 Ostrava, Czech Republic

Received 16 July 2013; Accepted 16 September 2013

Academic Editors: Y. C. Lu and J. M. Prado

Copyright © 2013 Michaela Štamborská et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Michaela Štamborská, Miroslav Kvíčala, and Vratislav Mareš, “Process of Identifying Stress Fields from Strain Fields in the Specimen with a Hole,” ISRN Materials Science, vol. 2013, Article ID 536069, 8 pages, 2013. doi:10.1155/2013/536069