About this Journal Submit a Manuscript Table of Contents
ISRN Materials Science
Volume 2013 (2013), Article ID 541762, 6 pages
http://dx.doi.org/10.1155/2013/541762
Research Article

Fabrication of Hybrid Surface Composite through Friction Stir Processing and Its Impression Creep Behaviour

Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Surathkal, Karnataka 575025, India

Received 1 July 2013; Accepted 24 July 2013

Academic Editors: K. Hokamoto and E. J. Nassar

Copyright © 2013 S. Prakrathi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

S. Prakrathi, M. Ravikumar, K. R. Udupa, and K. Udaya Bhat, “Fabrication of Hybrid Surface Composite through Friction Stir Processing and Its Impression Creep Behaviour,” ISRN Materials Science, vol. 2013, Article ID 541762, 6 pages, 2013. doi:10.1155/2013/541762