About this Journal Submit a Manuscript Table of Contents
ISRN Materials Science
Volume 2013 (2013), Article ID 541762, 6 pages
http://dx.doi.org/10.1155/2013/541762
Research Article

Fabrication of Hybrid Surface Composite through Friction Stir Processing and Its Impression Creep Behaviour

Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Surathkal, Karnataka 575025, India

Received 1 July 2013; Accepted 24 July 2013

Academic Editors: K. Hokamoto and E. J. Nassar

Copyright © 2013 S. Prakrathi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. E. Smallman and R. J. Bishop, Modern Physical Metallurgy and Materials Engineering, Butterworth Publishing, New York, NY, USA, 6th edition, 1999.
  2. T. P. D. Rajan, R. M. Pillai, and B. C. Pai, “Functionally graded Al-Al3Ni in situ intermetallic composites: fabrication and microstructural characterization,” Journal of Alloys and Compounds, vol. 453, no. 1-2, pp. L4–L7, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. R. S. Mishra and Z. Y. Ma, “Friction stir welding and processing,” Materials Science and Engineering R, vol. 50, no. 1-2, pp. 1–78, 2005. View at Publisher · View at Google Scholar
  4. D. Yadav and R. Bauri, “Nickel particle embedded aluminium matrix composite with high ductility,” Materials Letters, vol. 64, no. 6, pp. 664–667, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. H. S. Arora, H. Singh, and B. K. Dindaw, “Composite fabrication using friction stir processing—a review,” The International Journal of Advanced Manufacturing Technology, vol. 61, no. 9–12, pp. 1043–1055, 2012. View at Publisher · View at Google Scholar
  6. R. S. Mishra, Z. Y. Ma, and I. Charit, “Friction stir processing: a novel technique for fabrication of surface composite,” Materials Science and Engineering A, vol. 341, no. 1-2, pp. 307–310, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Shafiei-Zarghani, S. F. Kashani-Bozorg, and A. Zarei-Hanzaki, “Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing,” Materials Science and Engineering A, vol. 500, no. 1-2, pp. 84–91, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. E. R. I. Mahmoud, K. Ikeuchi, and M. Takahashi, “Fabrication of SiC particle reinforced composite on aluminium surface by friction stir processing,” Science and Technology of Welding and Joining, vol. 13, no. 7, pp. 607–618, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. Z. Y. Ma and R. S. Mishra, “Cavitation in superplastic 7075 Al alloys prepared via friction stir processing,” Acta Materialia, vol. 51, no. 12, pp. 3551–3569, 2003. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Dolatkhah, P. Golbabaei, M. K. Besharati Givi, and F. Molaiekiya, “Investigating effects of process parameters on microstructural and mechanical properties of Al5052/SiC metal matrix composite fabricated via friction stir processing,” Materials and Design, vol. 37, pp. 458–464, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. I. S. Lee, P. W. Kao, and N. J. Ho, “Microstructure and mechanical properties of Al-Fe in situ nanocomposite produced by friction stir processing,” Intermetallics, vol. 16, no. 9, pp. 1104–1108, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. C. J. Hsu, P. W. Kao, and N. J. Ho, “Intermetallic-reinforced aluminum matrix composites produced in situ by friction stir processing,” Materials Letters, vol. 61, no. 6, pp. 1315–1318, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. D. Yadav and R. Bauri, “Processing, microstructure and mechanical properties of nickel particles embedded aluminium matrix composite,” Materials Science and Engineering A, vol. 528, no. 3, pp. 1326–1333, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. L. Ke, C. Huang, L. Xing, and K. Huang, “Al-Ni intermetallic composites produced in situ by friction stir processing,” Journal of Alloys and Compounds, vol. 503, no. 2, pp. 494–499, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Qian, J. Li, J. Xiong, F. Zhang, and X. Lin, “Insitu synthesizing Al3Ni for fabrication of intermetallic reinforced aluminium alloy composites by friction stir processing,” Materials Science and Engineering A, vol. 550, pp. 279–285, 2012. View at Publisher · View at Google Scholar
  16. D. H. Sastry, “Impression creep technique—an overview,” Materials Science and Engineering A, vol. 409, no. 1-2, pp. 67–75, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. R. A. Higgins, Engineering Metallurgy, Arnold Publishing, New York, NY, USA, 6th edition, 1993.
  18. H. Baker and H. Okamoto, ASM Handbook, vol. 3 of Alloy Phase Diagrams, ASM International, Materials Park, Ohio, USA, 1992.
  19. M. Atapour, A. Pilchak, G. S. Frankel, and J. C. Williams, “Corrosion behaviour of investment cast and friction stir processed Ti-6Al-4V,” Corrosion Science, vol. 52, no. 9, pp. 3062–3069, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. C. W. Yang, “Tensile mechanical properties and failure behaviors of friction stir processing (FSP) modified Mg-Al-Zn and dual-phase Mg-Li-Al-Zn alloys,” in Materials Science: Advanced Topics, Y. Mastai, Ed., InTech, 2013.
  21. C.-F. Chen, P.-W. Kao, L. Chang, and N.-J. Ho, “Mechanical properties of nanometric Al2O3 particulate-reinforced Al-Al11Ce3 composites produced by friction stir processing,” Materials Transactions, vol. 51, no. 5, pp. 933–938, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. H. Sieber, J. S. Park, J. Weissmüller, and J. H. Perepezko, “Structural evolution and phase formation in cold-rolled aluminum-nickel multilayers,” Acta Materialia, vol. 49, no. 7, pp. 1139–1151, 2001. View at Publisher · View at Google Scholar · View at Scopus
  23. F. A. Mohamed and T. G. Langdon, “Deformation mechanism maps based on grain size,” Metallurgical Transactions, vol. 5, no. 11, pp. 2339–2345, 1974. View at Scopus
  24. Y. Li and T. G. Langdon, “Creep behavior of an Al-6061 metal matrix composite reinforced with alumina particulates,” Acta Materialia, vol. 45, no. 11, pp. 4797–4806, 1997. View at Scopus
  25. H. Takagi, M. Dao, M. Fujiwara, and M. Otsuka, “Experimental and computational creep characterization of Al-Mg solid-solution alloy through instrumented indentation,” Philosophical Magazine, vol. 83, no. 35, pp. 3959–3976, 2003. View at Publisher · View at Google Scholar · View at Scopus
  26. O. D. Sherbi and J. Wordsworth, “Deformation processing and structure,” in ASM Handbook, chapter 8, American Society for Metals, Metal Park, Ohio, USA, 1984.