About this Journal Submit a Manuscript Table of Contents
ISRN Materials Science
Volume 2013 (2013), Article ID 679820, 9 pages
http://dx.doi.org/10.1155/2013/679820
Review Article

An Overview of Semisolid Processing of Aluminium Alloys

Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Selangor, Malaysia

Received 9 November 2012; Accepted 19 December 2012

Academic Editors: Z. Ma, E. J. Nassar, and R. Rodríguez

Copyright © 2013 M. S. Salleh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [3 citations]

The following is the list of published articles that have cited the current article.

  • M. N. Mohammed, M. Z. Omar, J. Syarif, Z. Sajuri, M. S. Salleh, and K. S. Alhawari, “Microstructural Evolution during DPRM Process of Semisolid Ledeburitic D2 Tool Steel,” The Scientific World Journal, vol. 2013, pp. 1–7, 2013. View at Publisher · View at Google Scholar
  • M.S. Salleh, M.Z. Omar, J. Syarif, K.S. Alhawari, and M.N. Mohammed, “Microstructure and Mechanical Properties of Thixoformed A319 Aluminium Alloy,” Materials & Design, 2014. View at Publisher · View at Google Scholar
  • Manish Kumar, Sudip K. Samanta, Pradip Dutta, and Debashis Ghosh, “Semisolid Processing of A380 Al Alloy Using Cooling Slope,” Materials and Manufacturing Processes, vol. 29, no. 4, pp. 422–428, 2014. View at Publisher · View at Google Scholar