About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [143 citations: 1–100 of 143 articles]

Articles published in ISRN Materials Science have been cited 143 times. The following is a list of the 143 articles that have cited the articles published in ISRN Materials Science.

  • Yuyu Pan, Ran Xiao, Qiming Peng, Shitong Zhang, Dongge Ma, Feng Li, Fangzhong Shen, Yinghui Wang, Bing Yang, and Yuguang Ma, “Employing similar to 100% Excitons in OLEDs by Utilizing a Fluorescent Mole cule with Hybridized Local and ChargeTransfer Excited State,” Advanced Functional Materials, vol. 24, no. 11, pp. 1609–1614, 2014. View at Publisher · View at Google Scholar
  • Safa Shoaee, Raja Shahid Ashraf, Hugo Bronstein, Bob C. Schroeder, Weimin Zhang, Zhuping Fei, Martin Heeney, Iain McCulloch, and James R. Durrant, “Material Crystallinity as a Determinant of Triplet Dynamics and Oxygen Quen ching in Donor Polymers for Organic Photovoltaic Devices,” Advanced Functional Materials, vol. 24, no. 10, pp. 1474–1482, 2014. View at Publisher · View at Google Scholar
  • Vygintas Jankus, Fernando B. Dias, and Andrew Monkman, “Photophysical Investigation of the Thermally Activated Delayed Emission fro m Films of m-MTDATA: PBD Exciplex,” Advanced Functional Materials, vol. 24, no. 16, pp. 2343–2351, 2014. View at Publisher · View at Google Scholar
  • Bader S. Ghanem, Raja Swaidan, Eric Litwiller, and Ingo Pinnau, “Ultra-Microporous Triptycene-based Polyimide Membranes for High-Performance Gas Separation,” Advanced Materials, 2014. View at Publisher · View at Google Scholar
  • Bader S. Ghanem, Raja Swaidan, Xiaohua Ma, Eric Litwiller, and Ingo Pinnau, “Energy-Efficient Hydrogen Separation by AB-Type Ladder-Polymer Molecular Sieves,” Advanced Materials, 2014. View at Publisher · View at Google Scholar
  • Yuichi Masubuchi, “Simulating the Flow of Entangled Polymers,” Annual Review of Chemical and Biomolecular Engineering, vol. 5, no. 1, pp. 11–33, 2014. View at Publisher · View at Google Scholar
  • Ruifang Du, Xiangbiao Qiu, and Aidong Li, “Ferroelectric modulation on resonant tunneling through perovskite double-ba rriers,” Applied Physics Letters, vol. 104, no. 14, 2014. View at Publisher · View at Google Scholar
  • S. Karthikeyan, and B. Ramamoorthy, “Effect of reducing agent and nano Al2O3 particles on the properties of electroless Ni–P coating,” Applied Surface Science, 2014. View at Publisher · View at Google Scholar
  • Diôgo P. Bezerra, Francisco W.M. da Silva, Pedro A.S. de Moura, Allyson G.S. Sousa, Rodrigo S. Vieira, Enrique Rodriguez-Castellon, and Diana C.S. de Azevedo, “CO2 Adsorption In Amine-Grafted Zeolite 13X,” Applied Surface Science, 2014. View at Publisher · View at Google Scholar
  • Christian Dammann, “Simulation of strain-induced anisotropy for polymers with weighting functio ns,” Archive of Applied Mechanics, vol. 84, no. 1, pp. 21–41, 2014. View at Publisher · View at Google Scholar
  • T. Preethi, B. Abarna, K.N. Vidhya, and G.R. Rajarajeswari, “Sol-gel derived cobalt doped nano titania photocatalytic system for solar light induced degradation of crystal violet,” Ceramics International, 2014. View at Publisher · View at Google Scholar
  • Jie Zhou, Ping Chen, Xu Wang, Yan Wang, Yi Wang, Feng Li, Minghui Yang, Yan Huang, Junsheng Yu, and Zhiyun Lu, “Charge-transfer-featured materials—promising hosts for fabrication of efficient OLEDs through triplet harvesting via triplet fusion,” Chemical Communications, vol. 50, no. 57, pp. 7586, 2014. View at Publisher · View at Google Scholar
  • Enyuan Hu, Seong-Min Bak, Jue Liu, Xiqian Yu, Yongning Zhou, Steven N. Ehrlich, and Kyung-Wan Nam, “Oxygen-Release-Related Thermal Stability and Decomposition Pathways of LixN i0.5Mn1.5O4 Cathode Materials,” Chemistry of Materials, vol. 26, no. 2, pp. 1108–1118, 2014. View at Publisher · View at Google Scholar
  • Brandon R. Long, Jason R. Croy, Fulya Dogan, Matthew R. Suchomel, Baris Key, Jianguo Wen, Dean J. Miller, Michael M. Thackeray, and Mahalingam Balasubramanian, “ Effect of Cooling Rates on Phase Separation in 0.5Li 2 MnO 3 ·0.5LiCoO 2 Electrode Materials for Li-Ion Batteries ,” Chemistry of Materials, vol. 26, no. 11, pp. 3565–3572, 2014. View at Publisher · View at Google Scholar
  • Weigang Lu, Zhangwen Wei, Daqiang Yuan, Jian Tian, Stephen Fordham, and Hong-Cai Zhou, “Rational Design and Synthesis of Porous Polymer Networks: Toward High Surface Area,” Chemistry of Materials, pp. 140720160630008, 2014. View at Publisher · View at Google Scholar
  • N. Vu-Bac, T. Lahmer, Y. Zhang, X. Zhuang, and T. Rabczuk, “Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs),” Composites Part B: Engineering, vol. 59, pp. 80–95, 2014. View at Publisher · View at Google Scholar
  • Behrad Koohbor, Silas Mallon, Addis Kidane, and Michael A. Sutton, “A DIC-based study of in-plane mechanical response and fracture of orthotropic carbon fiber reinforced composite,” Composites Part B: Engineering, 2014. View at Publisher · View at Google Scholar
  • Jankerle Neves Boeloni, Natália Melo Ocarino, Alfredo Miranda Goes, and Rogéria Serakides, “Comparative study of osteogenic differentiation potential of mesenchymal stem cells derived from bone marrow and adipose tissue of osteoporotic female rats,” Connective Tissue Research, pp. 1–11, 2014. View at Publisher · View at Google Scholar
  • Claudio Garino, Elisa Borfecchia, Roberto Gobetto, Jeroen A. van Bokhoven, and Carlo Lamberti, “Determination of the electronic and structural configuration of coordination compounds by synchrotron-radiation techniques,” Coordination Chemistry Reviews, 2014. View at Publisher · View at Google Scholar
  • Shouli Bai, Kewei Zhang, Jianhua Sun, Ruixian Luo, Dianqing Li, and Aifan Chen, “Surface decoration of WO3 architectures with Fe2O3 nanoparticles for visible-light-driven photocatalysis,” CrystEngComm, vol. 16, no. 16, pp. 3289, 2014. View at Publisher · View at Google Scholar
  • T. Badapanda, S. Sarangi, B. Behera, P.K. Sahoo, S. Anwar, T.P. Sinha, G.E. Luz, E. Longo, and L.S. Cavalcante, “Structural refinement, Optical and Ferroelectric properties of microcrystalline Ba(Zr0.05Ti0.95)O3 perovskite,” Current Applied Physics, 2014. View at Publisher · View at Google Scholar
  • Bart Van der Bruggen, and Patricia Luis, “Pervaporation as a tool in chemical engineering: a new era?,” Current Opinion in Chemical Engineering, vol. 4, pp. 47–53, 2014. View at Publisher · View at Google Scholar
  • David M. Warsinger, Jaichander Swaminathan, Elena Guillen-Burrieza, Hassan A. Arafat, and John H. Lienhard V, “Scaling and fouling in membrane distillation for desalination applications: A review,” Desalination, 2014. View at Publisher · View at Google Scholar
  • Avi Efraty, “Closed circuit desalination series no-12: the use of 4, 5 and 6 element modules with the BWRO-CCD technology for high recovery, low energy and reduced fouling applications,” Desalination and Water Treatment, pp. 1–25, 2014. View at Publisher · View at Google Scholar
  • Aaron Breivogel, Myeongjin Park, Donggu Lee, Stefanie Klassen, Angelika Kuehnle, Changhee Lee, and Kookheon Char, “Push-Pull Design of Bis(tridentate) Ruthenium(II) Polypyridine Chromophores as Deep Red Light Emitters in Light-Emitting Electrochemical Cells,” European Journal of Inorganic Chemistry, vol. 2014, no. 2, pp. 288–295, 2014. View at Publisher · View at Google Scholar
  • M. Hazwan Hussin, Afidah Abdul Rahim, Mohamad Nasir Mohamad Ibrahim, Mehdi Yemloul, Dominique Perrin, and Nicolas Brosse, “Investigation on the structure and antioxidant properties of modified lignin obtained by different combinative processes of oil palm fronds (OPF) biomass,” Industrial Crops and Products, vol. 52, pp. 544–551, 2014. View at Publisher · View at Google Scholar
  • Laura Martel, Nicola Magnani, Jean-Francois Vigier, Jacobus Boshoven, Chris Selfslag, Ian Farnan, Jean-Christophe Griveau, Joseph Somers, and Thomas Fanghänel, “High-Resolution Solid-State Oxygen-17 NMR of Actinide-Bearing Compounds: An Insight into the 5f Chemistry,” Inorganic Chemistry, pp. 140613123354009, 2014. View at Publisher · View at Google Scholar
  • E. Legrand, X. Feaugas, and J. Bouhattate, “Generalized model of desorption kinetics: Characterization of hydrogen trapping in a homogeneous membrane,” International Journal of Hydrogen Energy, 2014. View at Publisher · View at Google Scholar
  • D.F. Araújo, E.O. Vilar, and J. Palma Carrasco, “A critical review of mathematical models used to determine the density of hydrogen trapping sites in steels and alloys,” International Journal of Hydrogen Energy, 2014. View at Publisher · View at Google Scholar
  • Luma M. Ahmed, Irina Ivanova, Falah H. Hussein, and Detlef W. Bahnemann, “Role of Platinum Deposited on TiO2 in Photocatalytic Methanol Oxidation and Dehydrogenation Reactions,” International Journal of Photoenergy, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • P. Shanthraj, P. Eisenlohr, M. Diehl, and F. Roters, “Numerically robust spectral methods for crystal plasticity simulations of heterogeneous materials,” International Journal of Plasticity, 2014. View at Publisher · View at Google Scholar
  • Farah Nadia Daud, Azizan Ahmad, and Khairiah Haji Badri, “An Investigation on the Properties of Palm-Based Polyurethane Solid Polymer Electrolyte,” International Journal of Polymer Science, vol. 2014, pp. 1–5, 2014. View at Publisher · View at Google Scholar
  • J. P. M. Goncalves, “Cohesive zone model for high-cycle fatigue of adhesively bonded joints unde r mode I loading,” International Journal of Solids and Structures, vol. 51, no. 5, pp. 1123–1131, 2014. View at Publisher · View at Google Scholar
  • Björn Rohde, Andrea Wibbeke, Hans-Peter Heim, and Volker Schöppner, “The Manufacture of Hot-Compacted Layered Composite Systems Made of Oriented Semifinished PP-Films,” ISRN Polymer Science, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • William R. Newson, Ramune Kuktaite, Mikael S. Hedenqvist, Mikael Gällstedt, and Eva Johansson, “Effect of Additives on the Tensile Performance and Protein Solubility of Industrial Oilseed Residual Based Plastics,” Journal of Agricultural and Food Chemistry, pp. 140708150527008, 2014. View at Publisher · View at Google Scholar
  • N.M. Ferreira, A.V. Kovalevsky, J.C. Waerenborgh, M. Quevedo-Reyes, A.A. Timopheev, F.M. Costa, and J.R. Frade, “Crystallization of iron-containing Si-Al-Mg-O glasses under laser floating zone conditions,” Journal of Alloys and Compounds, 2014. View at Publisher · View at Google Scholar
  • Liliana Rosu, Cristian-Catalin Gavat, and Cristian-Dragos Varganici, “Photochemical stability of cellulose textile surfaces painted with some rea ctive azo-triazine dyes,” Journal of Materials Science, vol. 49, no. 13, pp. 4469–4480, 2014. View at Publisher · View at Google Scholar
  • Raja Swaidan, Bader S. Ghanem, Eric Litwiller, and Ingo Pinnau, “Pure- and Mixed-Gas CO2/CH4 Separation Properties of PIM-1 and an Amidoxime-Functionalized PIM-1,” Journal of Membrane Science, 2014. View at Publisher · View at Google Scholar
  • Andreza de Sousa, Karynne Cristina de Souza, Paula Maria da Silva Leite, Ricardo Geraldo de Sousa, and Edésia Martins Barros de Sousa, “A Dual-Functional [SBA-15/Fe3O4/P(N-iPAAm)] Hybrid System as a Potential Nanoplatform for Biomedical Application,” Journal of Nanomaterials, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • H. Y. Wong, and A. H. You, “Impedance and Structural Studies on Plasticized PCL-LiSO3CF3-SiO2 Polymer E lectrolytes,” Journal of Nanoscience and Nanotechnology, vol. 14, no. 7, pp. 5561–5567, 2014. View at Publisher · View at Google Scholar
  • T Steilmann, B J Maier, M Gospodinov, U Bismayer, and B Mihailova, “ Electric-field-induced local structural phenomena in relaxor ferroelectric PbSc 0.5 Nb 0.5 O 3 near the intermediate temperature T* studied by Raman spectroscopy ,” Journal of Physics: Condensed Matter, vol. 26, no. 17, pp. 175401, 2014. View at Publisher · View at Google Scholar
  • Sahrul Saehana, Muslimin, and Mikrajuddin Abdullah, “Electrochemical impedance spectroscopy study of TiO2 based solar cells,” Journal of Renewable and Sustainable Energy, vol. 6, no. 2, pp. 023109, 2014. View at Publisher · View at Google Scholar
  • Domenica Tonelli, Mario Berrettoni, Giuliana Aquilanti, and Marco Minicucci, “Copper hexacyanoferrate modified electrodes for hydrogen peroxide detection as studied by X-ray absorption spectroscopy,” Journal of Solid State Electrochemistry, vol. 18, no. 4, pp. 965–973, 2014. View at Publisher · View at Google Scholar
  • Heidy Cruz, and Younggon Son, “Developent of a new technique removing paint from recycled car-bumper,” Journal of the Korea Academia-Industrial cooperation Society, vol. 15, no. 5, pp. 3298–3303, 2014. View at Publisher · View at Google Scholar
  • Shinya Okita, Yasuhito Takahashi, Leonardo Puppulin, Akihiro Sudo, and Giuseppe Pezzotti, “Failure analysis of sandwich-type ceramic-on-ceramic hip joints: A spectros copic investigation into the role of the polyethylene shell component,” Journal of The Mechanical Behavior of Biomedical Materials, vol. 31, pp. 55–67, 2014. View at Publisher · View at Google Scholar
  • Chi-Kien Seou, Sie-Tiong Ha, Yip-Foo Win, Siew-Ling Lee, and Guan-Yeow Yeap, “Synthesis and phase transition behaviours of new non-symmetric liquid crystal dimers,” Liquid Crystals, pp. 1–8, 2014. View at Publisher · View at Google Scholar
  • Arsia Takeh, and Sachin Shanbhag, “Inferring Comonomer Content Using Crystaf: Uncertainty Analysis,” Macromolecular Theory and Simulations, 2014. View at Publisher · View at Google Scholar
  • Raja Swaidan, Majed Al-Saeedi, Bader Ghanem, Eric Litwiller, and Ingo Pinnau, “Rational Design of Intrinsically Ultramicroporous Polyimides Containing Bridgehead-Substituted Triptycene for Highly Selective and Permeable Gas Separation Membranes,” Macromolecules, pp. 140715161705006, 2014. View at Publisher · View at Google Scholar
  • K.W. Liew, H.J. Kong, K.O. Low, C.K. Kok, and Derric Lee, “The Effect of Heat Treatment Duration on Mechanical and Tribological Characteristics of Ni-P-PTFE Coating on Low Carbon High Tensile Steel,” Materials & Design, 2014. View at Publisher · View at Google Scholar
  • M.S. Salleh, M.Z. Omar, J. Syarif, K.S. Alhawari, and M.N. Mohammed, “Microstructure and Mechanical Properties of Thixoformed A319 Aluminium Alloy,” Materials & Design, 2014. View at Publisher · View at Google Scholar
  • Manish Kumar, Sudip K. Samanta, Pradip Dutta, and Debashis Ghosh, “Semisolid Processing of A380 Al Alloy Using Cooling Slope,” Materials and Manufacturing Processes, vol. 29, no. 4, pp. 422–428, 2014. View at Publisher · View at Google Scholar
  • Sandhya Kulkarni, B.M. Nagabhushana, Narsimha Parvatikar, Anilkumar Koppalkar, C. Shivakumara, and R. Damle, “Dielectric and electrical studies of Pr3+ doped nano CaSiO3 perovskite ceramics,” Materials Research Bulletin, vol. 50, pp. 197–202, 2014. View at Publisher · View at Google Scholar
  • Md A Basar, S Debnath, and A B Md Ismail, “An experimental study on the effect of film layer and annealing on morphology by AFM of tin dioxide thin film prepared by spin-coating method,” Materials Research Express, vol. 1, no. 2, pp. 026402, 2014. View at Publisher · View at Google Scholar
  • Gad Sabbatier, Pierre Abadie, Florence Dieval, Bernard Durand, and Gaétan Laroche, “Evaluation of an air spinning process to produce tailored biosynthetic nanofibre scaffolds,” Materials Science and Engineering: C, vol. 35, pp. 347–353, 2014. View at Publisher · View at Google Scholar
  • Adem Tataroğlu, Mert Yıldırım, and Halil Mert Baran, “Dielectric characteristics of gamma irradiated Au/SnO2/n-Si/Au (MOS) capacitor,” Materials Science in Semiconductor Processing, 2014. View at Publisher · View at Google Scholar
  • S. Sunithamani, and P. Lakshmi, “Simulation study on performance of MEMS piezoelectric energy harvester with optimized substrate to piezoelectric thickness ratio,” Microsystem Technologies, 2014. View at Publisher · View at Google Scholar
  • J. Forneris, M. Jakšić, Ž. Pastuović, and E. Vittone, “A Monte Carlo software for the 1-dimensional simulation of IBIC experiments,” Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2014. View at Publisher · View at Google Scholar
  • Stephan Friedrich, and Charles L. Melcher, “The europium oxidation state in CsSrI3:Eu scintillators measured by X-ray a bsorption spectroscopy,” Optical Materials, vol. 36, no. 3, pp. 670–674, 2014. View at Publisher · View at Google Scholar
  • Khian-Hooi Chew, Kok-Geng Lim, Lye-Hock Ong, and Makoto Iwata, “ Effect of composition and interface intermixing on polarization behaviors of BaTiO 3 /(Ba,Sr)TiO 3 superlattices ,” physica status solidi (a), 2014. View at Publisher · View at Google Scholar
  • T. Vitova, S. Mangold, C. Paulmann, M. Gospodinov, V. Marinova, and B. Mihailova, “X-ray absorption spectroscopy of Ru-doped relaxor ferroelectrics with a perovskite-type structure,” Physical Review B, vol. 89, no. 14, 2014. View at Publisher · View at Google Scholar
  • Zheng Gong Wang, Xia Liu, Dong Wang, and Jian Jin, “Tröger's base-based copolymers with intrinsic microporosity for CO2 separation and effect of Tröger's base on separation performance,” Polymer Chemistry, vol. 5, no. 8, pp. 2793, 2014. View at Publisher · View at Google Scholar
  • M. Hazwan Hussin, Afidah Abdul Rahim, Mohamad Nasir Mohamad Ibrahim, Dominique Perrin, Mehdi Yemloul, and Nicolas Brosse, “Impact of catalytic oil palm fronds (OPF) pulping on organosolv lignin properties,” Polymer Degradation and Stability, 2014. View at Publisher · View at Google Scholar
  • Qiaobao Zhang, Kaili Zhang, Daguo Xu, Guangcheng Yang, Hui Huang, Fude Nie, Chenmin Liu, and Shihe Yang, “CuO nanostructures: Synthesis, characterization, growth mechanisms, fundamental properties, and applications,” Progress in Materials Science, vol. 60, pp. 208–337, 2014. View at Publisher · View at Google Scholar
  • D. Sarada Kalyani, S. Srinivasa Rao, M. Sarath Babu, B. V. Appa Rao, and B. Sreedhar, “Electrochemical and surface analytical studies of carbon steel protected from corrosion in a low-chloride environment containing a phosphonate-based inhibitor,” Research on Chemical Intermediates, 2014. View at Publisher · View at Google Scholar
  • Sanne Sulejmani, Camille Sonnenfeld, Thomas Geernaert, Geert Luyckx, Pawel Mergo, Waclaw Urbanczyk, Karima Chah, Hugo Thienpont, and Francis Berghmans, “Disbond monitoring in adhesive joints using shear stress optical fiber sensors,” Smart Materials and Structures, vol. 23, no. 7, pp. 075006, 2014. View at Publisher · View at Google Scholar
  • M. Saif, S.M.K. Aboul-Fotouh, S.A. El-Molla, M.M. Ibrahim, and L.F.M. Ismail, “Evaluation of the photocatalytic activity of Ln3+-TiO2 nanomaterial using fluorescence technique for real wastewater treatment,” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 2014. View at Publisher · View at Google Scholar
  • Nurhidayatullaili Muhd Julkapli, Samira Bagheri, and Sharifah Bee Abd Hamid, “Recent Advances in Heterogeneous Photocatalytic Decolorization of Synthetic Dyes,” The Scientific World Journal, vol. 2014, pp. 1–25, 2014. View at Publisher · View at Google Scholar
  • Xiaoli Zhao, Jie Jin, Jui-Ching Cheng, Jyh-Wei Lee, Kuo-Hong Wu, Kuo-Cheng Lin, Jung-Ruey Tsai, and Kou-Chen Liu, “Structural and optical properties of zirconia thin films deposited by reactive high-power impulse magnetron sputtering,” Thin Solid Films, 2014. View at Publisher · View at Google Scholar
  • Guan-Cheng Fang, Yuh-Chia Chang, Ting-Yi Kuo, Pi-Tai Chou, Shih-Wei Lin, and Ken-Tsung Wong, “Highly Efficient Bilayer Interface Exciplex For Yellow Organic Light-Emitti ng Diode,” Acs Applied Materials & Interfaces, vol. 5, no. 15, pp. 6826–6831, 2013. View at Publisher · View at Google Scholar
  • Pengfei Li, Lin Hu, Alan J. H. McGaughey, and Sheng Shen, “Crystalline Polyethylene Nanofibers with the Theoretical Limit of Young's Modulus,” Advanced Materials, 2013. View at Publisher · View at Google Scholar
  • Maura Monduzzi, Sandrina Lampis, Sergio Murgia, and Andrea Salis, “From Self-Assembly Fundamental Knowledge to Nanomedicine Developments,” Advances in Colloid and Interface Science, 2013. View at Publisher · View at Google Scholar
  • Shi Liu, and Ilya Grinberg, “Exploration of the intrinsic inertial response of ferroelectric domain wall s via molecular dynamics simulations,” Applied Physics Letters, vol. 103, no. 23, 2013. View at Publisher · View at Google Scholar
  • M. Prabakaran, M. Venkatesh, S. Ramesh, and V. Periasamy, “Corrosion inhibition behavior of propyl phosphonic acid-Zn2+ system for car bon steel in aqueous solution,” Applied Surface Science, vol. 276, pp. 592–603, 2013. View at Publisher · View at Google Scholar
  • Khin Zaw, M. Reza Safizadeh, Joachim Luther, and Kim Choon Ng, “Analysis of a membrane based air-dehumidification unit for air conditioning in tropical climates,” Applied Thermal Engineering, 2013. View at Publisher · View at Google Scholar
  • Montserrat Colilla, Blanca González, and María Vallet-Regí, “Mesoporous silica nanoparticles for the design of smart delivery nanodevices,” Biomaterials Science, vol. 1, no. 2, pp. 114, 2013. View at Publisher · View at Google Scholar
  • Abu Bakar Mohd Hilmi, Ahmad Sukari Halim, Hasnan Jaafar, Abu Bakar Asiah, and Asma Hassan, “Chitosan Dermal Substitute and Chitosan Skin Substitute Contribute to Accelerated Full-Thickness Wound Healing in Irradiated Rats,” BioMed Research International, vol. 2013, pp. 1–13, 2013. View at Publisher · View at Google Scholar
  • Yakindra Prasad Timilsena, Chandana Janaka Abeywickrama, Sudip Kumar Rakshit, and Nicolas Brosse, “Effect of different pretreatments on delignification pattern and enzymatic hydrolysability of miscanthus, oil palm biomass and typha grass,” Bioresource Technology, vol. 135, pp. 82–88, 2013. View at Publisher · View at Google Scholar
  • Jin Young Hong, Young Soo Kim, and Kyeong Keun Oh, “Fractionation and delignification of empty fruit bunches with low reaction severity for high sugar recovery,” Bioresource Technology, vol. 146, pp. 176–183, 2013. View at Publisher · View at Google Scholar
  • Viana, Thiago Silva, Duque, Pedro Henrique Fonseca, Pinto, Camila Prestes, Aguiar, Ana Luiza Carvalho Guimaraes, Souza, Flávia Carvalho, Cotrim, Bruno Almeida, Resende, Gabriel de Oliveira, Barreto Jr, and Cleber Bomfim, “Sinthesys Of Cinnamic Acid Derivatives With Corrosion Inhibition Activity For Carbon Steel Alloy,” Blucher Chemistry Proceedings, vol. 2, no. 1, pp. 141–141, 2013. View at Publisher · View at Google Scholar
  • Raquel Martinez-Franco, Joakim R. Thogersen, and Avelino Corma, “Efficient One-Pot Preparation of Cu-SSZ-13 Materials using Cooperative OSDA s for their Catalytic Application in the SCR of NOx,” Chemcatchem, vol. 5, no. 11, pp. 3316–3323, 2013. View at Publisher · View at Google Scholar
  • Supalak Kongsri, Kanogporn Janpradit, Keerati Buapa, Suchila Techawongstien, and Saksit Chanthai, “Nanocrystalline hydroxyapatite from fish scale waste: Preparation, characterization and application for selenium adsorption in aqueous solution,” Chemical Engineering Journal, vol. 215-216, pp. 522–532, 2013. View at Publisher · View at Google Scholar
  • Manuel Moliner, Cristina Martinez, and Avelino Corma, “Synthesis strategies for preparing useful small pore zeolites for gas separations and catalysis,” Chemistry of Materials, pp. 130617054637002, 2013. View at Publisher · View at Google Scholar
  • Mark E Davis, “Zeolites From a Materials Chemistry Perspective,” Chemistry of Materials, pp. 130906030614005, 2013. View at Publisher · View at Google Scholar
  • Revanur Prasad, Swayampakula Kalyani, Dasari Manjunath, and Madupathi Madhumala, “Processing of surface and ground water by hydrostatic pressure-driven membr ane techniques: design and economic aspects,” Desalination And Water Treatment, vol. 51, no. 28-30, pp. 5873–5885, 2013. View at Publisher · View at Google Scholar
  • Chinwe A. Nwanya, Charl J. Jafta, Paul M. Ejikeme, Paulinus E. Ugwuoke, M.V. Reddy, Rose U. Osuji, Kenneth I. Ozoemena, and Fabian I. Ezema, “Electrochromic and electrochemical capacitive properties of tungsten oxide and its polyaniline nanocomposite films obtained by chemical bath deposition method,” Electrochimica Acta, 2013. View at Publisher · View at Google Scholar
  • Kyungmok Kim, and Bernard Forest, “Fracture simulation for zirconia toughened alumina microstructure,” Engineering Computations, vol. 30, no. 5, pp. 648–664, 2013. View at Publisher · View at Google Scholar
  • Monica Cicuendez, Isabel Izquierdo-Barba, Maria Teresa Portoles, and Maria Vallet-Regi, “Biocompatibility and levofloxacin delivery of mesoporous materials,” European Journal of Pharmaceutics and Biopharmaceutics, vol. 84, no. 1, pp. 115–124, 2013. View at Publisher · View at Google Scholar
  • Ajoy K. Chanda, Swati Neogi, and Sudarsan Neogi, “Optimization of Plasma Treatment for Enhanced Filler Matrix Adhesion in Manufacturing Green Composites with Rice Husk,” Indian Chemical Engineer, pp. 1–12, 2013. View at Publisher · View at Google Scholar
  • Rimeh Daghrir, Patrick Drogui, and Didier Robert, “ Modified TiO 2 For Environmental Photocatalytic Applications: A Review ,” Industrial & Engineering Chemistry Research, pp. 130226090752004, 2013. View at Publisher · View at Google Scholar
  • Annalaura Del Regno, Aleksandra Gonciaruk, Laura Leay, Mariolino Carta, Matthew Croad, Richard Malpass-Evans, and Neil B. McKeown, “Polymers of Intrinsic Microporosity Containing Troger Base for CO2 Capture,” Industrial & Engineering Chemistry Research, vol. 52, no. 47, pp. 16939–16950, 2013. View at Publisher · View at Google Scholar
  • Soshu Kirihara, Satoko Tasaki, and Yusuke Itakura, “Creation of Titania Artificial Interfaces with Geometric Patterns by Using Microstereolithography and Aqueous Solution Techniques,” International Journal Of Applied Ceramic Technology, vol. 10, no. 3, pp. 468–473, 2013. View at Publisher · View at Google Scholar
  • Thierry Vanherck, Guillaume Jean, Maurice Gonon, Jacques Lobry, and Francis Cambier, “Spark Plasma Sintering: Homogenization of the Compact Temperature Field for Non Conductive Materials,” International Journal of Applied Ceramic Technology, 2013. View at Publisher · View at Google Scholar
  • Siraj Shaik, Madhusudana Rao Kummara, Sudhakar Poluru, Chandrababu Allu, Jaffer Mohiddin Gooty, Chowdoji Rao Kashayi, and Marata Chinna Subbarao Subha, “A Green Approach to Synthesize Silver Nanoparticles in Starch-co-Poly(acrylamide) Hydrogels by Tridax procumbens Leaf Extract and Their Antibacterial Activity,” International Journal of Carbohydrate Chemistry, vol. 2013, pp. 1–10, 2013. View at Publisher · View at Google Scholar
  • Jun Wang, and Weizhi Li, “Adjusting White OLEDs with Yellow Light Emission Phosphor Dye and Ultrathin NPB Layer Structure,” International Journal Of Photoenergy, 2013. View at Publisher · View at Google Scholar
  • Asghar Azizi, Saeed Azizi, Amir-Abbas Farshid, Behnam Heshmatian, and Keyvan Amini, “Improvement of functional recovery of transected peripheral nerve by means of chitosan grafts filled with Vitamin E, pyrroloquinoline quinone and their combination,” International Journal of Surgery, 2013. View at Publisher · View at Google Scholar
  • D. J. Goossens, “Diffuse Scattering from Lead-Containing Ferroelectric Perovskite Oxides,” ISRN Materials Science, vol. 2013, pp. 1–17, 2013. View at Publisher · View at Google Scholar
  • Marco Giorgetti, “A Review on the Structural Studies of Batteries and Host Materials by X-Ray Absorption Spectroscopy,” ISRN Materials Science, vol. 2013, pp. 1–22, 2013. View at Publisher · View at Google Scholar
  • B. Ruta, V.M. Giordano, L. Erra, C. Liu, and E. Pineda, “Structural and dynamical properties of Mg65Cu25Y10 metallic glasses studied by in situ high energy x-ray diffraction and time resolved x-ray photon correlation spectroscopy,” Journal of Alloys and Compounds, 2013. View at Publisher · View at Google Scholar
  • Byron Freelon, Kamlesh Suthar, and Jan Ilavsky, “A multi-length-scale USAXS/SAXS facility: 10–50 keV small-angle X-ray scattering instrument,” Journal of Applied Crystallography, vol. 46, no. 5, pp. 1508–1512, 2013. View at Publisher · View at Google Scholar
  • Martin Mayo, Eyal Yahel, Yaron Greenberg, El'ad N. Caspi, Brigitte Beuneu, and Guy Makov, “Determination of the structure of liquids: an asymptotic approach,” Journal of Applied Crystallography, vol. 46, no. 6, pp. 1582–1591, 2013. View at Publisher · View at Google Scholar