- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Submit a Manuscript
- Subscription Information
- Table of Contents
ISRN Mathematical Physics
Volume 2013 (2013), Article ID 156857, 17 pages
Unifying the Galilei Relativity and the Special Relativity
1Universidade Federal do Rio de Janeiro, Observatório do Valongo, 20080-090 Rio de Janeiro, RJ, Brazil
2Departamento de Matemática, Universidade Federal de Santa Catarina, 88.040-900 Florianópolis, SC, Brazil
Received 4 April 2013; Accepted 8 May 2013
Academic Editors: G. Cleaver, A. Herrera-Aguilar, D. Singleton, and F. Sugino
Copyright © 2013 Alexandre Lyra and Marcelo Carvalho. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
We present two models combining some aspects of the Galilei and the Special relativities that lead to a unification of both relativities. This unification is founded on a reinterpretation of the absolute time of the Galilei relativity that is considered as a quantity in its own and not as mere reinterpretation of the time of the Special relativity in the limit of low velocity. In the first model, the Galilei relativity plays a prominent role in the sense that the basic kinematical laws of Special relativity, for example, the Lorentz transformation and the velocity law, follow from the corresponding Galilei transformations for the position and velocity. This first model also provides a new way of conceiving the nature of relativistic spacetime where the Lorentz transformation is induced by the Galilei transformation through an embedding of 3-dimensional Euclidean space into hyperplanes of 4-dimensional Euclidean space. This idea provides the starting point for the development of a second model that leads to a generalization of the Lorentz transformation, which includes, as particular cases, the standard Lorentz transformation and transformations that apply to the case of superluminal frames.
It is common to consider the Galilei relativity as the low velocity limit case of the Special relativity (SR). This is revealed by the behavior of the Lorentz transformation when we take ; for example, In this view, the absolute time of the Galilei relativity, henceforth denoted by , is not considered as an independent quantity but it refers to a particular situation of SR when it is possible to identify and , which allows us to take . It is in this sense that the absolute time is usually conceived. Therefore, the fact that one generally has seems to deny the possibility of having an absolute time in SR. We refer to the time of the SR as the physical time.
In our work we intend to reinterpret the notion of absolute time in such a way that the Galilei relativity recovers its role as a theory in its own, correcting then a common view that treats the principles of the Galilei and the Special relativities as irreconcilable notions. One of the difficulties we encounter to carry out this goal is related to the way we currently understand the concept of time, which is somehow already shaped by ideas of the SR. Here, we focus our efforts on the development of two models, called models I and II, that are built in order to allow to introduce the concept of absolute time in a general setup that also incorporates the concept of time of SR.
In model I, the fact that suggest us not to identify the absolute time with but with a function depending on and, perhaps, on the spatial location where the event occurred. Then, if for a certain instant we have , representing the same event with respect to two inertial frames, we would expect the absolute character of to imply that , with this expression being verified for any value of the ratio . In addition, we would also expect to obtain the Lorentz transformation by replacing into the Galilei law . Having established this, the next step would be to obtain the velocity law of SR from the corresponding velocity law of the Galilei relativity, . The fulfillment of these two laws places the Galilei relativity as a guiding principle for deriving some of the SR laws.
From a calculational perspective, the Lorentz transformation can be obtained by considering as variables the set , together with the equation . In model I, we will show that in order to combine the Galilei and the Special relativities, it is sufficient to enlarge the variables’ set of SR to and to consider the pair of equations Here, the effect of this enlargement is to produce not only the usual Lorentz transformation, but also an extra equation relating the absolute and the physical time, which gives an operational definition for the absolute time associated to the occurrence of an event.
In what concerns the structure of spacetime, we notice that both relativities are formulated in terms of a 4-dimensional space . In the Galilei view, two observers belonging to inertial frames , describe the occurrence of an event, respectively, as a point and . Here, due to the nature of the absolute time, for a fixed , the Galilei transformation reduces itself to a map .
In the SR view, the observers describe the event as a point , and where now, due to the nature of the physical time, the Lorentz transformation is not restricted to be a map as before, but it is considered as a map on the whole space, . In model I, the existence of the absolute time allows us to unveil an additional structure present in the SR spacetime that is already present in the Galilei view. In fact, when we express the absolute time in terms of the physical time, , , we will show that we can define embeddings , in terms of certain hyperplanes , . The Lorentz transformation is then seen as a map between these 3-dimensional hyperplanes that is induced by the Galilei transformation acting on , for a certain . Therefore, we may see the spacetime as the union of these hyperplanes, for example, . In the spacetime of Galilei relativity this splitting is self-evident and corresponds to the hyperplanes of .
Inspired by the equation that defines the embeddings , , we develop model II by taking as our fundamental equation, where are arbitrary parameters that will allow us to define a generalization of the Lorentz transformation. In model II, the absolute time is introduced by modifying the previous equation to Here, the Galilei relativity arises assuming in addition the relation . This is sufficient to reduce the generalized transformation to the particular form of the standard Lorentz transformation, showing then the consistency of both relativities. In model II, however, we will show that we are allowed to have the Lorentz transformation weather or not we consider the Galilei relativity, a situation that does not happen in model I.
Some works [1, 2] deal with the Galilei and the Special relativities but focus on opposite goals not proposing a scheme for unifying both relativities. In fact, in  the assumption that the Galilei law of velocity applies to the motion of bodies, signals, and forces leads to inconsistencies that are solved by the introduction of the postulate of the constancy of the speed of light, which ultimately leads to SR. In , a transformation relating the Galilei and the Minkowski-Einstein coordinates is established, which may signalize that relativistic effects are due to motion relative to an actual 3-space. (The author continues this development in a model that is known by Process Physics.) In our work, we follow another direction as our goal is to harmonize both relativities by a convenient treatment of the absolute time and the fundamentals laws of both relativities. We are not aware of any work devoted to this issue; therefore, we hope that our work may provide a convenient starting point for further investigation on this topic.
Our work is organized as follows. Model I is developed in Section 3. In Section 3.1 we introduce a set of assumptions settling the main properties of the physical space and time that are necessary to develop a model incorporating both the Galilei and the Special relativities. We axiomatize the existence of two times, the absolute time of the Galilei relativity and the physical time of SR, and we discuss an important issue, due to Møller, concerning the correct interpretation of the physical space where (1) is defined. In Section 3.2 we obtain the Lorentz transformation from the Galilei law and the assumptions of Section 3.1. In Section 3.4 we obtain from the law of velocity transformation of Galilei relativity the corresponding velocity law of SR. We also discuss a problem associated to the so-called Thomas precession. In Section 3.5 we give a geometric interpretation for the spacetime of SR and show how the concept of absolute time allows to define a partition of the spacetime in terms of certain 3-dimensional hyperplanes. Model II is developed in Section 4. In Section 4.1 we establish a set of assumptions that is slightly different than the assumptions of model I, namely, in what concerns the introduction of the Special and the Galilei relativities (resp., numbered as assumptions (III) and (IV)). In Section 4.2 we derive a transformation that we call Generalized Lorentz Transformation, and in Section 4.3 we analyze the velocity transformation associated to it. We then show that the Generalized Lorentz Transformation includes, as particular cases, the standard Lorentz transformation together with transformations that may be used when we have superluminal frames. We then analyze in Section 4.4 how to introduce the Galilei relativity in the framework of model II. In Section 4.5 we analyze the conservation of momentum and obtain the corresponding relativistic expression for the mass. Finally, in Section 5 we analyze how elementary considerations from the differential structure of the projective space allow us to think on the concept of the absolute time as associated to one of the dimensions of Euclidean space .
2. Basic Definitions
We recall some basic definitions that are necessary for the statement of our assumptions.
An event is any physical occurrence taking place on a certain location and in a certain instant. We adopt the standard definitions of observer and reference frame as stated concisely in ; that is, by an observer we understand any entity equipped with a standard rod and a standard clock that allows for the measurement of length and time (in fact, the physical time as we will introduce in the assumption (II)) and that is able to communicate with other observers by means of light signals. A reference frame is understood as an infinite set of observers each one at rest relative to the other and having their standard clocks synchronized. Abstractly, the infinite set of observers composing a reference frame is idealized in such a way that for any event there is an observer present on the same location where the event took place, which then establishes the space coordinate of the event. This observer also determines, by the reading of his clock, the instant of time when the event occurred. We will consider reference frames endowed with a rectangular coordinate system. By an inertial frame we understand any frame in which a body free of forces is unaccelerated.
We use the notation to denote the description of an event relative to a frame . We write to indicate the same event as seen by the frames . In the particular case when one frame analyzes the movement of another frame , we will assume that the frame is entirely represented by its origin and write for the position of relative to , and for the time measured by . Finally, in our work by a Lorentz transformation we always mean a Lorentz boost, except in Section 5 where a Lorentz boost attains its precise meaning as a particular Lorentz transformation.
3. Model I
3.1. The Assumptions
In what concerns space and time, our basic assumptions are as follows. Space. Each inertial frame describes space as being an euclidean 3-dimensional vector space. Time. We model time as any variable that can be used to describe what we intuitively understand as the “instant when events occur.” We distinguish two kinds of choices as follows. By physical time, denoted by , we understand a choice for the time variable that can be measured with the use of standard devices, like atomic clocks, under suitable arrangements (e.g., when they are the clocks of a reference frame and are all conveniently synchronized, etc.). By absolute time, denoted by , we understand a choice for the time variable having the property that given an event all observers assign to it the same value for the instant when the event occurred. (Later, through the analysis of their transformation properties, we will identify the physical time as the ordinary time of the special relativity, while the absolute time will be identified with the time of the Galilei relativity.) As a principle, we assume that any variable that serves to describe time may be expressed in terms of the physical time in such way that by the measurement of the latter one can determine the value of the former. Therefore, for any frame in which one knows how to shift from it is possible to describe an event writing its coordinates as or . Given two inertial frames , moving with relative velocity and an event whose coordinates are , relative to , we have When we consider speed calculated in terms of derivatives relative to the physical time, the relation (4) expresses the constancy of the speed of light. The Galilean Relativity Principle. Given two inertial frames , moving with relative velocity and an event whose coordinates are , relative to , we have componentwise that The relation between and is linear.
Remarks. (i) In assumption (I), it is assumed that observers in inertial frames see physical space endowed with an euclidean structure. This assumption is supported by the lack of evidence signalyzing deviations of space properties from the euclidean structure (see the discussion of French in [4, pages 59–61]). The position of an event relative to inertial frames , is written as , and since each frame is endowed with its own coordinate system, the spaces and are conceived as distinct spaces; therefore, we must understand the relation between the vectors and established in (5) not as a vector equation defined in one and the same vector space. However, it is possible to do so if we reinterpret the vectors and as follows. (This reasoning is originally due to Møller .) Given two frames , we assume that there is a single space where the components of the vectors are seen as images of maps and such that for a fixed they satisfy (5); that is, we can think of the vectors , as vectors in , which justify using the same notation for them. Equation (5) is now understood as an equation defined in .
From the perspective of the Galilei relativity, it is clear that the vector can be measured directly from the observers of the frame that at the instant are placed, respectively, at the positions corresponding to the origin of the frame and the event ; that is, componentwise we identify , (7) where This corresponds to the same equation (5), now referred entirely to the space . This procedure is equivalent to identify with . A similar procedure allows to identify and . The assumption that spaces , are euclidean is then consistent with the interpretation we obtain for (5) through the identification , .
A different picture emerges in SR. Now, instead of (5) we have the relation (it seems it was Møller (see [5, Section ]) who first noticed the importance of giving a correct interpretation for (9) as an equation established in an abstract vector space, where it would make sense to relate to the vectors and that, in principle, belong to different spaces. Møller did so thinking exclusively from the perspective of the SR. However, the same question is already manifest from the perspective of the Galilei relativity if we intend to interpret correctly (5)) Here, the vectors , are mapped into an abstract space , where we understand that (9) is defined. From the perspective of SR and according to the frame , if the event occurs at the instant , the observers on the frame that occupy, respectively, the positions of the origin of the frame and the event allow us to define a vector which is not componentwise equal to the vector as measured by the frame (11) In fact, using the relation together with (9) to write in terms of , we obtain componentwise that Therefore, from the perspective of SR, we cannot identify the vectors and as we did before. Physically, this means that measurements performed by the observers of the frame are not sufficient to identify (10) with (9) of . We then distinguish the spaces and in the sense that we cannot identify or with as we did in the case of the Galilei relativity.
(ii) In assumption (III), we consider that (4) holds not only for the events associated with the movement of a light ray, but also for every event. As we know , in the standard treatment of SR if we assume that (4) is verified for a light ray, then from the assumption of the linearity of the transformation involving and we obtain that condition (4) is also verified for any event. In our approach, since we work essentially with two equations (4), (5) and an extended set of variables , there is no guarantee that assuming that (4) is true for a light ray would imply its validity for all events. (For the case of the standard treatment of the SR, Landau and Lifshitz give a heuristic argument justifying it in [7, page 5], while Einstein put it axiomatically in [8, appendix one].) Therefore, in the development of our model it is necessary to assume from the beginning that (4) is verified for not only for those events associated to the movement of a light ray, but also all events. This will become evident in the derivation shown in Section 3.2.
(iii) The physical and the absolute time introduced in assumption (II) assume their specific characteristic from the conditions they have to obey in assumptions (III) and (IV). These conditions identify as the time of Special relativity and as the time of Galilei relativity.
(iv) Whenever we set a transformation between two frames we assume that at , or equivalently at , the origins of both frames coincide and their coordinate axes are parallel.
(v) In assumption (V), by a linear relation between the pairs we mean that and depend only on the first-order power of .
3.2. Deriving the Transformation
In order to obtain the transformations we start from assumption (IV) which gives From assumption (III) we obtain that allows us to write Now, according to assumption (V), we look for a relation between and such that the corresponding expression for given in (17), when replaced into (14), results in a transformation involving at most terms to the first power in , . In order to obtain that, let us consider the following particular relation between and , for example, which gives . The constants and must be chosen in such way that becomes a perfect square, that is, which gives . (We could have written (19) in the form . As we will see, the minus sign adopted in (19) becomes necessary if we intend to obtain the standard Lorentz transformation of SR.) We have then Here, the choice for the sign of is fixed as follows. Replacing given by (20) into (14) and considering the time transformation (18), we assume that the transformation is invertible upon replacing with . Therefore, we notice the following. If , we must choose If , we must choose In both cases, we obtain the transformation As we have expected, the transformation (23) satisfies the condition and leaves invariant, that is, since it was built in order to satisfy those assumptions. Here, we assume that the parameter depends on the relative speed , which for convenience we denote by . Under this assumption, we also obtain that .
The transformation (23) depends on the velocity defined as the derivative relative to the absolute time: Now, considering the physical time we can define another velocity We obtain a relation between , as follows. Identifying with the origin of the frame we have from (24) which allows us to write and then Since the parameter depends on , we obtain that also depends on through the expression which gives Therefore, in our formalism every speed calculated as the derivative relative to the physical time is always less than . Since in SR this is the type of derivative we consider, it seems that the problem of tachyons is ruled out in SR. From (31) we may express in terms of as and the transformation (23) becomes that is, the familiar Lorentz transformation. Hence, we have obtained a complete equivalence between the Galilei and the Lorentz transformation.
From (30) we obtain a similar expression relating and ,, and since depends on the absolute value , we end up with From (30) we could also have considered as a vector in . However, we avoid this interpretation as it would lead to an inconsistency associated to the so-called Thomas precession that we will analyze in Section 3.4.3.
3.3. On the Role of the Parameter
As we have seen, the parameter was introduced in (18) as a free parameter in the sense that it was assumed to depend only on the relative speed between the frames. The assumptions give no prescription on how to fix this dependence. Having established the relation between the absolute and the physical time, we introduced another velocity , considered as a derivative relative to the physical time, which is related to and the parameter through (30), (31). Whatever the form we may take for , once we obtain as a function of we may rewrite in terms of , which results in (33). This gives a “universal” character for the Lorentz transformation with the transformation (23) becoming (34). Despite this, the constraint between and arising from a particular choice of may signalize different behaviors.
In fact, let us assume and choose such that With this choice, the transformation (23) becomes that agrees with the expression obtained originally by Shankara (see [9, equations , ]) and also by Duffey  in the description of superluminal frames. From (31) we obtain a relation that is also present in the tachyonic model of , whose context is of a wave propagating in a medium with the velocities being interpreted in a different way; namely, is the group velocity of the wave, while is the phase velocity. Here, even though the transformation (37) reduces to the form given on (34), which has the usual Lorentz form, the physical distinction between and may be employed to select one of the forms of the transformation as being physically relevant for the problem one is analyzing. We return to this issue in Section 4.3.2.
3.4. The Velocity Transformation
Following the program of deducing transformations directly from the assumptions given in (I)–(IV) and the results previously obtained, we now intend to obtain the law of velocity transformation and analyze some of its consequences.
3.4.1. Obtaining the Transformation from the Galilean Velocity Law
Let us assume two frames and moving with velocity and such that at (or equivalently at ) both origins coincide. The position of a moving particle is written as , , and from we obtain the rule of velocity addition in Galilei relativity: From (24), and using the chain rule, we have Let us denote Taking the scalar product by on both sides of (40) we obtain Using this last expression back in (40) together with (30) and (31), we obtain the final form Since and are derivatives of the position vectors , with respect to the physical times and , we see (43) as the “physical time” counterpart of the rule of velocity addition of the Galilean relativity. It is straightforward to obtain that and we conclude that and . However, for a particle moving with a constant velocity relative to the frames , , we also have similar relations as the ones given in (31): Therefore, the only possibility for having , is related to a situation that does not demand relation (31), perhaps the case of an accelerated particle that would result in a relation for different from the one obtained in (24) that is the base for deducing (31).
3.4.2. The Light Speed as a Derivative Relative to
Let us assume the propagation of a light ray with , being the position of a point in the wave front as seen by and ; that is, with . We then have that implies different values for the speed when considered as a rate of change relative to the absolute time; that is, Here, there is one more consistency check to be performed. We expect to have the following relation: . In fact, consider an event as described by . At this instant, assume that the observer in the frame that is at the same location of the event sends a light ray towards the observer that is at the origin of . The arrival of the light ray at the origin of corresponds to another event described by as . Here, in order to relate and , and and , we assume any auxiliary frame moving relative to with velocity and employ (25). For the events , , we then have Denoting and expressing , we obtain Then, and from (47) we obtain .
3.4.3. The Composition of Velocities
Let us assume three frames moving relative to each other with velocities , , having their axes parallel and their origins coinciding at . According to Galilei relativity, we write with In particular, we have , which results in We now analyze the movement of relative to and and then the movement of relative to and using the same procedure that led to (43).
(i) The Movement of Relative to and . For the movement of relative to and , we have and From (53) we obtain Denoting and using (56), we obtain by the same procedure employed in obtaining (43) the following expression:
(ii) The Movement of Relative to and . For the movement of relative to and , we have and From (53) and using that , , , we now have Denoting we obtain where we have used that to identify . We recognize (59), (63) with the velocity transformations obtained by Møller in his analysis of the Thomas precession . As we know, in this particular case, the velocities , are related by a rotation [5, 11]. We notice that each of (59), (63) involves vectors belonging to different spaces; therefore we should interpret each equation in the same way as we did for (9); that is, are vectors belonging to an abstract space where (59), (63) make sense. It is in this space that we have which accounts for the Thomas precession. However, the vectors are defined in the space where they satisfy (55), which is a consequence of the frames having their axis parallel during its translational movement. Now, the reason for not identifying the velocities , as vectors in becomes clear. Indeed, if this was the case, then using (30) we would associate each of them with the vectors , through and from (55) we would have , which contradicts (64).
3.5. The Structure of Space and Time
Spacetime is the physical arena where events occur. Therefore, in order to describe spacetime, we must endow it with a suitable coordinate system, for example, the one provided by a reference frame, which is how we describe events. In our approach, we have an equivalence between the absolute and the physical time that allows an observer to associate coordinates with events according to or , and from each of these coordinatizations originates a particular view for the spacetime. In what follows, we search for a description of spacetime that combines the views of the Galilei and the Special relativities.
Given two frames , , let us write the Galilei transformation as Due to the absolute character of , we have that for a fixed the Galilei transformation is essentially a map , where denote the 3-dimensional Euclidean space. When spacetime is described using as coordinates, we refer to it as the Galilei spacetime that admits the following representation: . In this sense, the Galilei spacetime decomposes in terms of 3-dimensional spaces that are indexed by .
Now, let us analyze the transformation under the form (23). For the same fixed value of , we rewrite (25) as with and . We identify (67) as the equation of two hyperplanes and defined, respectively, in the spaces and (the spaces , serve here as the background in terms of which each observer describes spacetime). Then, for a fixed value of , the transformation (23) is seen as a transformation between these hyperplanes. Here, when spacetime is described using as coordinates (in fact, in order to have coordinates with the dimension of length we would write and in place of, respectively, and ), we refer to it as the SR spacetime and it decomposes as .
From the previous considerations, the properties of the spacetime that arise from our unified model are summarized as follows. First, we notice that the Galilei and SR spacetime refer to the same spacetime in fact, they are just different descriptions of the same structure. Second, both the Galilei and the SR spacetime are sliced by 3-dimensional spaces, with the Galilei spacetime being “sliced” by hyperplanes that are normal to the -direction or, equivalently, by planes that correspond to the space . For the SR spacetime, the “slicing” is made by hyperplanes , that are orthogonal to the direction of the vectors and . In particular, the relation between the Galilei transformation and the Lorentz transformation is clarified by the diagram below: (69) where for a fixed and relative to two frames of reference that move with relative velocity we have defined mappings We notice that endowing , , , with the standard Euclidean topology we obtain , as embedded, respectively, in and . Then, given a Galilei transformation , the embeddings transfer to the spaces , where it assumes the form of the Lorentz transformation , which is shown in the scheme below (71) This view of the transformation provides an alternative way to analyze some aspects of the composition of Lorentz transformations. Indeed, let us write the Lorentz transformation as and consider three frames , and that move with relative velocities , , and . Consider then the following diagram (73) We notice that since the hyperplanes and are different, the Lorentz transformations and may be composed only through the maps , for example, and we have Therefore, from this interpretation of the Lorentz transformation acting on hyperplanes associated to the same value of , we reobtain the common fact that the composition of two Lorentz transformations is not a Lorentz transformation. Here, the reason is that even though the composition may be identified with , the latter induces the Lorentz transformation only through the embeddings , .
4. Model II
We propose another model based on the following assumptions. Space. Each inertial frame describes space as an euclidean 3-dimensional vector space. Time. Time is described by a variable that depends on the frame in such a way that two inertial frames and measure time and . The speed of light is constant relative to inertial frames. Relative to two inertial frames, any event satisfies with arbitrary parameters. The relation between and is linear.
Remarks. Postulates (I) and (II) are essentially the same postulates (I) and (II) of model I, except that in the current postulate (II) of model II there is no mention of the absolute time.
The condition is suggested by a previous condition given in (67), but now with the constants , being arbitrary parameters. Here, (76) is the starting point from which we will derive the transformation. In this sense, it plays the same role as the relation of the standard SR formulation. However, while in SR this last equation may be expressed in terms of the invariance of the quadratic form , which is a quantity defined uniquely in terms of the spacetime coordinates, the same cannot be said of (76) since it contains explicitly the parameters that, in general, do not refer to any known property of the space and time. Therefore, unless we are able to identify the parameters with any intrinsic property of the spacetime, it will not be possible to associate any mathematical structure with (76) as it was done with .
4.2. The Generalized Lorentz Transformation
From (V) we write From (IV), we obtain by replacing them into (76) that which momentarily gives Here we assume with arbitrary quantities that will be fixed later. We require that the inverse transformation is obtained by the change of into (79). This fixes . Let us consider now the expression for the velocity. Here, we have From (III) the speed of light is constant relative to any inertial frame. Then for a light wave we have From (81), (80), using , and due to the arbitrariness of the direction of the unit vector , we obtain which then fixes all the transformation constants , and in terms of as follows and finally leaves us with the transformations We have then obtained a class of transformations that is compatible with the invariance of the speed of light and that depends on arbitrary parameters . We call this transformation Generalized Lorentz Transformation (GLT). It is immediate to check that it satisfies (and not only for a light wave), which shows that it must include the standard Lorentz transformation as a particular case.
Remark. It is possible to work with a more general relation than the one given in (76); for example, if we assume that can be transformed, then we would write and the effect of the invariance of in this new condition corresponds to replace , in (85), that is, with being an arbitrary space rotation.
In  Kapuscik using only the assumption of the linearity of the transformation and the constancy of the speed of light proposed a generalization of the Lorentz transformation having the form The comparison of the time transformation given in (87) and (88) suggests the identification that also shows the equivalence of the space transformation. In our formalism, up to the derivation of (87), there is no restriction on the parameters , while in the development of  they have to obey . Since in  the relative velocity between the frames is identified with , the previous inequality leads to the restriction . As we will show in Sections 4.3.1 and 4.3.2, in our formalism there is no restriction on the relative speed of the frames. Having obtained the GLT given in (85) we analyze in the sequence some of its properties.
4.3. Transformation of Velocity
Associated with GLR, we obtain by replacing (84) into (81) the associated transformation of velocity as Therefore we obtain for the GLT that That is, relative to the two frames described by transformation (85), a particle that is described as subluminal (superluminal) particle by one frame will also be described as subluminal (superluminal) particle by the other frame.
4.3.1. A Transformation Involving Subluminal Frames:
As a particular case of transformation (85) let us choose the parameters in such way that with . We obtain that replacing in (85) leads to the transformation with that corresponds to the Lorentz transformation.
4.3.2. A Transformation Involving Superluminal Frames:
Let us choose satisfying with . Now we obtain and replacing it into (85) gives the transformation with . Here, we reobtained Shankara and Duffey’s transformation for tachyons [9, 10]. This transformation (98) appeared originally in  in the description of the propagation of a wave in a medium with one of the frames being at rest relative to the medium and the other moving with a speed greater than (in fact, in  since the medium is not the vacuum, instead of the light speed is denoted by ). The physical content of this transformation has been discussed more generally in , to which we refer the reader for details. Here we wish to analyze the role played by the velocity in the transformation. We consider two situations.
First, let us consider the movement of an object such that according to the frame the object is at rest relative to the frame . Assume that is the relative velocity between the frames. Then the frame writes for the position of the object . Replacing it in (98), we obtain and . Therefore, for an interval , associates with the movement of the object the set of events , while associates with the set of events . Since the whole movement of the object as described by reduces in to a static situation where and since there are many corresponding to the many possible values of , we conclude that relative to