About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [75 citations: 75 articles]

Articles published in ISRN Mechanical Engineering have been cited 75 times. The following is a list of the 75 articles that have cited the articles published in ISRN Mechanical Engineering.

  • Houlin Liu, Jian Ding, Hanwei Dai, and Minggao Tan, “Investigation into Transient Flow in a Centrifugal Pump with Wear Ring Clearance Variation,” Advances in Mechanical Engineering, vol. 2014, pp. 1–15, 2014. View at Publisher · View at Google Scholar
  • A. Garcia-Uceda Juarez, A. Raimo, E. Shapiro, and B. Thornber, “Steady Turbulent Flow Computations Using a Low Mach Fully Compressible Scheme,” AIAA Journal, pp. 1–17, 2014. View at Publisher · View at Google Scholar
  • Ashutosh Giri, and Patrick E. Hopkins, “Spectral analysis of thermal boundary conductance across solid/classical liquid interfaces: A molecular dynamics study,” Applied Physics Letters, vol. 105, no. 3, pp. 033106, 2014. View at Publisher · View at Google Scholar
  • Keith R. Holland, Dolores Garcia Escribano, and Hans-Elias de Bree, “An Introduction to Virtual Phased Arrays for Beamforming Applications,” Archives of Acoustics, vol. 39, no. 1, pp. 81–88, 2014. View at Publisher · View at Google Scholar
  • M.K.H. Abdolbaqi, C.S.N. Azwadi, and R. Mamat, “Heat Transfer Augmentation in the Straight Channel by Using Nanofluids,” Case Studies in Thermal Engineering, 2014. View at Publisher · View at Google Scholar
  • Jonathan D. Miller, Oleg N. Senkov, Christopher Woodward, Michael D. Uchic, and Jaimie Tiley, “Exploration and Development of High Entropy Alloys for Structural Applicati ons,” Entropy, vol. 16, no. 1, pp. 494–525, 2014. View at Publisher · View at Google Scholar
  • R Maryami, S Farahat, M Javad poor, and M H Shafiei Mayam, “Bubbly drag reduction in a vertical Couette–Taylor system with superimposed axial flow,” Fluid Dynamics Research, vol. 46, no. 5, pp. 055504, 2014. View at Publisher · View at Google Scholar
  • Dipankar Chatterjee, and Bittagopal Mondal, “Mixed Convection Heat Transfer from an Equilateral Triangular Cylinder in Cross Flow at Low Reynolds Numbers,” Heat Transfer Engineering, pp. 00–00, 2014. View at Publisher · View at Google Scholar
  • Adnan M. Hussein, R.A. Bakar, K. Kadirgama, and K.V. Sharma, “Heat transfer enhancement using nanofluids in an automotive cooling system,” International Communications in Heat and Mass Transfer, 2014. View at Publisher · View at Google Scholar
  • Yuzhu Liu, Hui Wang, Ajay K. Prasad, and Suresh G. Advani, “Role of heat pipes in improving the hydrogen charging rate in a metal hydride storage tank,” International Journal of Hydrogen Energy, 2014. View at Publisher · View at Google Scholar
  • Zheng Ye, Victor L. Berdichevsky, and Wenbin Yu, “An equivalent classical plate model of corrugated structures,” International Journal of Solids and Structures, 2014. View at Publisher · View at Google Scholar
  • P.H. Michael Böttger, Andrey V. Gusarov, Valery Shklover, Jörg Patscheider, and Matthias Sobiech, “Anisotropic layered media with microinclusions: Thermal properties of arc-evaporation multilayer metal nitrides,” International Journal of Thermal Sciences, vol. 77, pp. 75–83, 2014. View at Publisher · View at Google Scholar
  • Zahra Shomali, and Abbas Abbassi, “Investigation of highly non-linear dual-phase-lag model in nanoscale solid argon with temperature-dependent properties,” International Journal of Thermal Sciences, vol. 83, pp. 56–67, 2014. View at Publisher · View at Google Scholar
  • Andrey V. Gusarov, Valery Shklover, Joerg Patscheider, and Matthias Sobiech, “Anisotropic layered media with microinclusions: Thermal properties of arc-e vaporation multilayer metal nitrides,” International Journal of Thermal Sciences, vol. 77, pp. 75–83, 2014. View at Publisher · View at Google Scholar
  • Andrew J. Lohn, Patrick R. Mickel, and Matthew J. Marinella, “Analytical estimations for thermal crosstalk, retention, and scaling limits in filamentary resistive memory,” Journal of Applied Physics, vol. 115, no. 23, pp. 234507, 2014. View at Publisher · View at Google Scholar
  • Norma A. Rodriguez, “Numerical study of airflow and heat transfer in an air-cooled room with dif ferent inlet positions,” Journal of Building Physics, vol. 37, no. 3, pp. 246–268, 2014. View at Publisher · View at Google Scholar
  • H. A. Mohammed, K. M. Munisamy, and N. H. Saeid, “Influence of Various Geometrical Shapes on Mixed Convection Through an Open -Cell Aluminium Foam Filled with Nanofluid,” Journal of Computational and Theoretical Nanoscience, vol. 11, no. 5, pp. 1275–1289, 2014. View at Publisher · View at Google Scholar
  • Tommi Tynell, Ashutosh Giri, John Gaskins, Patrick E. Hopkins, Paolo Mele, Koji Miyazaki, and Maarit Karppinen, “Efficiently suppressed thermal conductivity in ZnO thin films via periodic introduction of organic layers,” Journal of Materials Chemistry A, vol. 2, no. 31, pp. 12150, 2014. View at Publisher · View at Google Scholar
  • Arun Prasath Manogaran, Prabu Manoharan, Didier Priem, Surendar Last Marya, and Guillaume Racineux, “Magnetic Pulse Spot Welding of bimetals,” Journal of Materials Processing Technology, 2014. View at Publisher · View at Google Scholar
  • Radhe Shyam, and Rajendra Prasad Chhabra, “Low Reynolds number flow of power-law fluids over two square cylinders in tandem,” Korean Journal of Chemical Engineering, 2014. View at Publisher · View at Google Scholar
  • Tao Qu, “An analysis of the effects of temperature and structural arrangements on th e thermal conductivity and thermal diffusivity of tropocollagen-hydroxyapat ite interfaces,” Materials Science & Engineering C-Materials for Biological Applications, vol. 38, pp. 28–38, 2014. View at Publisher · View at Google Scholar
  • Chwan-Lu Tseng, Shun-Yuan Wang, Shou-Chuang Lin, Jen-Hsiang Chou, and Ke-Fan Chen, “A Diagnostic System for Speed-Varying Motor Rotary Faults,” Mathematical Problems in Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Fan Yang, and Chao Liu, “Pressure Pulsations of the Blade Region in S-Shaped Shaft-Extension Tubular Pumping System,” Mathematical Problems in Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • A. Bose, and N. Nirmalkar, “Forced Convection from a Heated Equilateral Triangular Cylinder in Bingham Plastic Fluids,” Numerical Heat Transfer Part A-Applications, vol. 66, no. 1, pp. 107–129, 2014. View at Publisher · View at Google Scholar
  • Richa Agarwal, and Amit Dhiman, “Flow and Heat Transfer Phenomena Across Two Confined Tandem Heated Triangular Bluff Bodies,” Numerical Heat Transfer, Part A: Applications, vol. 66, no. 9, pp. 1020–1047, 2014. View at Publisher · View at Google Scholar
  • Xiao-wang Zhou, Reese E. Jones, Patrick E. Hopkins, and Thomas E. Beechem, “Thermal boundary conductance between Al films and GaN nanowires investigated with molecular dynamics,” Physical Chemistry Chemical Physics, vol. 16, no. 20, pp. 9403, 2014. View at Publisher · View at Google Scholar
  • Caroline S. Gorham, Khalid Hattar, Ramez Cheaito, John C. Duda, John T. Gaskins, Thomas E. Beechem, Jon F. Ihlefeld, Laura B. Biedermann, Edward S. Piekos, Douglas L. Medlin, and Patrick E. Hopkins, “Ion irradiation of the native oxide/silicon surface increases the thermal boundary conductance across aluminum/silicon interfaces,” Physical Review B, vol. 90, no. 2, 2014. View at Publisher · View at Google Scholar
  • Alessandro Corsini, and Giovanni Delibra, “The application of sinusoidal blade-leading edges in a fan-design methodolo gy to improve stall resistance,” Proceedings of The Institution of Mechanical Engineers Part A-Journal of Po, vol. 228, no. 3, pp. 255–271, 2014. View at Publisher · View at Google Scholar
  • Sebastian Stichel, and Per Wennhage, “Substitution of corrugated sheets in a railway vehicle's body structure by a multiple-requirement based selection process,” Proceedings of The Institution of Mechanical Engineers Part F-Journal of Ra, vol. 228, no. 2, pp. 143–157, 2014. View at Publisher · View at Google Scholar
  • A. Aziz Hairuddin, Talal Yusaf, and Andrew P. Wandel, “A review of hydrogen and natural gas addition in diesel HCCI engines,” Renewable and Sustainable Energy Reviews, vol. 32, pp. 739–761, 2014. View at Publisher · View at Google Scholar
  • S.-W. Lee, and C. Hierold, “Electrical and thermal insulation via an oxidized, rough contact interface for the electro-thermal actuation of carbon nanotubes,” Sensors and Actuators A: Physical, vol. 210, pp. 10–17, 2014. View at Publisher · View at Google Scholar
  • Carmine De Bartolo, Angelo Algieri, and Sergio Bova, “Simulation and experimental validation of the flow field at the entrance and within the filter housing of a production spark-ignition engine,” Simulation Modelling Practice and Theory, vol. 41, pp. 73–86, 2014. View at Publisher · View at Google Scholar
  • Matthew E. Caplan, Ashutosh Giri, and Patrick E. Hopkins, “Analytical model for the effects of wetting on thermal boundary conductance across solid/classical liquid interfaces,” The Journal of Chemical Physics, vol. 140, no. 15, pp. 154701, 2014. View at Publisher · View at Google Scholar
  • Yao Xu, and David M. Leitner, “Vibrational Energy Flow through the Green Fluorescent Protein–Water Interface: Communication Maps and Thermal Boundary Conductance,” The Journal of Physical Chemistry B, pp. 140206113646006, 2014. View at Publisher · View at Google Scholar
  • Zhanli Wang, Yanjuan Hu, Yao Wang, Chao Dong, and Zaixiang Pang, “Cutting Force Predication Based on Integration of Symmetric Fuzzy Number and Finite Element Method,” The Scientific World Journal, vol. 2014, pp. 1–8, 2014. View at Publisher · View at Google Scholar
  • Johnson K. Agbo, Yao Xu, Ping Zhang, John E. Straub, and David M. Leitner, “Vibrational energy flow across heme–cytochrome c and cytochrome c–water interfaces,” Theoretical Chemistry Accounts, vol. 133, no. 7, 2014. View at Publisher · View at Google Scholar
  • H. Saghi, and M. J. Ketabdari, “A Modification to SLIC and PLIC Volume of Fluid Models using New Advection Method,” Arabian Journal for Science and Engineering, 2013. View at Publisher · View at Google Scholar
  • Helena M. Ramos, Charlotte Teyssier, Irene Samora, and Anton J. Schleiss, “Energy recovery in SUDS towards smart water grids: A case study,” Energy Policy, 2013. View at Publisher · View at Google Scholar
  • P. D. Barros, A. J. Baptista, J. L. Alves, M. C. Oliveira, D. M. Rodrigues, and L. F. Menezes, “Trimming of 3D solid finite element meshes: sheet metal forming tests and applications,” Engineering with Computers, 2013. View at Publisher · View at Google Scholar
  • Indrajit G. Roy, “On robust estimation of discrete Hilbert transform of noisy data,” Geophysics, vol. 78, no. 6, pp. V239–V249, 2013. View at Publisher · View at Google Scholar
  • Adnan M. Hussein, K.V. Sharma, R.A. Bakar, and K. Kadirgama, “The effect of cross sectional area of tube on friction factor and heat transfer nanofluid turbulent flow,” International Communications in Heat and Mass Transfer, 2013. View at Publisher · View at Google Scholar
  • Iman Rahbari, Farzam Mortazavi, and Mohammad Hassan Rahimian, “High order numerical simulation of non-Fourier heat conduction: An application of numerical Laplace transform inversion,” International Communications in Heat and Mass Transfer, 2013. View at Publisher · View at Google Scholar
  • N. Shivasankaran, P. Senthil Kumar, G. Nallakumarasamy, and K. Venkatesh Raja, “Repair Shop Job Scheduling With Parallel Operators And Multiple Constraints Using Simulated Annealing,” International Journal of Computational Intelligence Systems, vol. 6, no. 2, pp. 223–233, 2013. View at Publisher · View at Google Scholar
  • G. Pantazis, E. Lambrou, S. Polydoras, and V. Gotsis, “3D Digital Terrestrial Model Creation Using Image Assisted Total Station and Rapid Prototyping Technology,” International Journal of Heritage in the Digital Era, vol. 2, no. 2, pp. 245–262, 2013. View at Publisher · View at Google Scholar
  • Ching-Song Jwo, Zi-Jie Chien, Yen-Lin Chen, and Chao-Chun Chien, “Development of a Wind Directly Forced Heat Pump and Its Efficiency Analysis,” International Journal of Photoenergy, vol. 2013, pp. 1–7, 2013. View at Publisher · View at Google Scholar
  • M. J. Ketabdari, and A. N. Roozbahani, “Numerical simulation of plunging wave breaking by the weakly compressible smoothed particle hydrodynamic method,” Journal of Applied Mechanics and Technical Physics, vol. 54, no. 3, pp. 477–486, 2013. View at Publisher · View at Google Scholar
  • R. F. Ganiev, O. B. Balakshin, and B. G. Kukharenko, “Limit vibration and pressure-pulsation cycles of the flow in the case of turbocharger rotor blade flutter,” Journal of Machinery Manufacture and Reliability, vol. 42, no. 1, pp. 1–6, 2013. View at Publisher · View at Google Scholar
  • Volker Franco Steier, Christof Koplin, and Andreas Kailer, “Influence of pressure-assisted polymerization on the microstructure and str ength of polymer-infiltrated ceramics,” Journal Of Materials Science, vol. 48, no. 8, pp. 3239–3247, 2013. View at Publisher · View at Google Scholar
  • Maodan Yuan, To Kang, Jianhai Zhang, and Hak-Joon Kim, “Numerical simulation of ultrasonic minimum reflection for residual stress e valuation in 2D case,” Journal of Mechanical Science and Technology, vol. 27, no. 11, pp. 3207–3214, 2013. View at Publisher · View at Google Scholar
  • Mohammad Javad Ketabdari, and Hassan Saghi, “Development of volume of fluid methods to model free surface flow using new advection algorithm,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2013. View at Publisher · View at Google Scholar
  • Zhang Li, Yingzi Jin, Dou Huashu, and Jin Yuzhen, “Numerical and experimental investigation on aerodynamic performance of small axial flow fan with hollow blade root,” Journal of Thermal Science, vol. 22, no. 5, pp. 424–432, 2013. View at Publisher · View at Google Scholar
  • Lun Liu, and Shupeng Sun, “Vibration Analysis for Rotating Ring-Stiffened Cylindrical Shells With Arbi trary Boundary Conditions,” Journal of Vibration and Acoustics-Transactions of The Asme, vol. 135, no. 6, 2013. View at Publisher · View at Google Scholar
  • Amit Kumar Dhiman, and Shailesh Kumar, “Non-Newtonian power-law flow across a confined triangular bluff body in a channel,” Korean Journal of Chemical Engineering, vol. 30, no. 1, pp. 33–44, 2013. View at Publisher · View at Google Scholar
  • Andrew J. Capel, Steve Edmondson, Steven D. R. Christie, Ruth D. Goodridge, Richard J. Bibb, and Matthew Thurstans, “Design and additive manufacture for flow chemistry,” Lab on a Chip, vol. 13, no. 23, pp. 4583, 2013. View at Publisher · View at Google Scholar
  • Yang Li, Zhen Luo, Fuyu Yan, Rui Duan, and Qi Yao, “Effect of external magnetic field on resistance spot welds of aluminum alloy,” Materials & Design, 2013. View at Publisher · View at Google Scholar
  • R. E. Jones, P. E. Hopkins, and J. C. Duda, “Molecular dynamics studies of material property effects on thermal boundary conductance,” Physical Chemistry Chemical Physics, vol. 15, no. 26, pp. 11078–11087, 2013. View at Publisher · View at Google Scholar
  • A. B. Rinkevich, and D. V. Perov, “Comparative classification of flaws using ultrasonic-tomography methods and evaluation of the instantaneous frequency of echo signals,” Russian Journal Of Nondestructive Testing, vol. 49, no. 6, pp. 301–308, 2013. View at Publisher · View at Google Scholar
  • Nithin V. George, and Ganapati Panda, “Advances in active noise control: A survey, with emphasis on recent nonlinear techniques,” Signal Processing, vol. 93, no. 2, pp. 363–377, 2013. View at Publisher · View at Google Scholar
  • S. Jedari Salami, M. Sadighi, M. Shakeri, and M. Moeinfar, “An Investigation on Low Velocity Impact Response of Multilayer Sandwich Composite Structures,” The Scientific World Journal, vol. 2013, pp. 1–9, 2013. View at Publisher · View at Google Scholar
  • Radivoje B. Pesic, Aleksandar Lj. Davinic, Snezana D. Petkovic, Dragan S. Taranovic, and Danijela M. Miloradovic, “Aspects Of Volumetric Efficiency Measurement For Reciprocating Engines,” Thermal Science, vol. 17, no. 1, pp. 35–48, 2013. View at Publisher · View at Google Scholar
  • Angelo Algieri, “FLUID DYNAMIC EFFICIENCY OF A HIGH PERFORMANCE MULTI-VALVE INTERNAL COMBUST ION ENGINE DURING THE INTAKE PHASE Influence of Valve-Valve Interference Ph enomena,” Thermal Science, vol. 17, no. 1, pp. 25–34, 2013. View at Publisher · View at Google Scholar
  • Wu Hong, Fengnian Jin, Jiannan Zhou, Zhicheng Xia, Ying Xu, Lin Yang, Qing Zheng, and Hualin Fan, “Quasi-static axial compression of triangular steel tubes,” Thin-Walled Structures, vol. 62, pp. 10–17, 2013. View at Publisher · View at Google Scholar
  • Helena M. Ramos, Charlotte Teyssier, and P. Amparo López-Jiménez, “Optimization of Retention Ponds to Improve the Drainage System Elasticity for Water-Energy Nexus,” Water Resources Management, vol. 27, no. 8, pp. 2889–2901, 2013. View at Publisher · View at Google Scholar
  • Sachin Kaothekar, Ghanshyam D. Soni, and Rajendra K. Chhajlani, “Effect of neutral collision and radiative heat-loss function on self-gravitational instability of viscous thermally conducting partially-ionized plasma,” AIP Advances, vol. 2, no. 4, pp. 042191, 2012. View at Publisher · View at Google Scholar
  • M. Winkler, and G. Kress, “Influence of corrugation geometry on the substitute stiffness matrix of cor rugated laminates,” Composite Structures, vol. 94, no. 9, pp. 2827–2833, 2012. View at Publisher · View at Google Scholar
  • Abderrahmane Bensmaine, Mohammed Dahane, and Lyes Benyoucef, “A non-dominated sorting genetic algorithm based approach for optimal machines selection in reconfigurable manufacturing environment,” Computers & Industrial Engineering, 2012. View at Publisher · View at Google Scholar
  • R. F. Ganiev, O. B. Balakshin, and B. G. Kukharenko, “Flutter with limit cycle of oscillations of turbocompressor rotor blades,” Doklady Physics, vol. 57, no. 9, pp. 352–354, 2012. View at Publisher · View at Google Scholar
  • Abdelnasser Abouhnik, and Alhussein Albarbar, “Wind turbine blades condition assessment based on vibration measurements and the level of an empirically decomposed feature,” Energy Conversion and Management, vol. 64, pp. 606–613, 2012. View at Publisher · View at Google Scholar
  • M. J. Ketabdari, and H. Saghi, “A Novel Algorithm of Advection Procedure in Volume of Fluid Method to Model Free Surface Flows,” ISRN Applied Mathematics, vol. 2012, pp. 1–16, 2012. View at Publisher · View at Google Scholar
  • Sachin Kaothekar, and R. K. Chhajlani, “Effect of Radiative Heat-Loss Function and Finite Larmor Radius Corrections on Jeans Instability of Viscous Thermally Conducting Self-Gravitating Astrophysical Plasma,” ISRN Astronomy and Astrophysics, vol. 2012, pp. 1–14, 2012. View at Publisher · View at Google Scholar
  • P. Gunnasegaran, N. H. Shuaib, and M. F. Abdul Jalal, “The Effect of Geometrical Parameters on Heat Transfer Characteristics of Compact Heat Exchanger with Louvered Fins,” ISRN Thermodynamics, vol. 2012, pp. 1–10, 2012. View at Publisher · View at Google Scholar
  • Sagil James, and Murali M. Sundaram, “A Feasibility Study of Vibration-Assisted Nano-Impact Machining by Loose Abrasives Using Atomic Force Microscope,” Journal of Manufacturing Science and Engineering, vol. 134, no. 6, pp. 061014, 2012. View at Publisher · View at Google Scholar
  • P. Malekzadeh, M. R. Golbahar Haghighi, and Y. Heydarpour, “Heat Transfer Analysis Of Functionally Graded Hollow Cylinders Subjected To An Axisymmetric Moving Boundary Heat Flux,” Numerical Heat Transfer Part A-Applications, vol. 61, no. 8, pp. 614–632, 2012. View at Publisher · View at Google Scholar
  • O. V. Nemytova, A. B. Rinkevich, and D. V. Perov, “Instantaneous frequency estimation used for the classification of echo sign als from different reflectors,” Russian Journal of Nondestructive Testing, vol. 48, no. 11, pp. 649–661, 2012. View at Publisher · View at Google Scholar
  • G. Seizilles, E. Bayart, M. Adda-Bedia, and A. Boudaoud, “Bending waves in crumpled sheets,” Physical Review E, vol. 84, no. 6, 2011. View at Publisher · View at Google Scholar