About this Journal Submit a Manuscript Table of Contents
ISRN Nanomaterials
Volume 2012 (2012), Article ID 890486, 4 pages
http://dx.doi.org/10.5402/2012/890486
Research Article

Compression Experiments on 𝜸 -Nanoparticles

1Institut für Werkstoffe, Technische Universität Braunschweig, Langer Kamp 8, 38106 Braunschweig, Germany
2Center for Integrated Nanotechnologies, Los Alamos National Laboratory, Los Alamos, NM 87545, USA
3EMPA, Swiss Federal Laboratories for Materials Science and Technology, Laboratory for Mechanics of Materials and Nanostructures, Feuerwerkerstrasse 39, 3602 Thun, Switzerland

Received 18 July 2012; Accepted 7 August 2012

Academic Editors: G. Dirras and F. Sansoz

Copyright © 2012 Andreas Landefeld et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Hoxhold and S. Büttgenbach, “Easily manageable, electrothermally actuated silicon micro gripper,” Microsystem Technologies, vol. 16, no. 8-9, pp. 1609–1617, 2010. View at Publisher · View at Google Scholar
  2. A. Landefeld and J. Rösler, “Fabrication of metallic nanocomponents by forging of Ni3Al-nanoparticles,” in MRS Proceedings, vol. 1412, 2012. View at Publisher · View at Google Scholar
  3. W. M. Mook, C. Niederberger, M. Bechelany, L. Philippe, and J. Michler, “Compression of freestanding gold nanostructures: from stochastic yield to predictable flow,” Nanotechnology, vol. 21, no. 5, 2010. View at Publisher · View at Google Scholar
  4. D. Mordehai, S. W. Lee, B. Backes, D. J. Srolovitz, W. D. Nix, and E. Rabkin, “Size effect in compression of single-crystal gold microparticles,” Acta Materialia, vol. 59, no. 13, pp. 5202–5215, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. J. R. Greer, W. C. Oliver, and W. D. Nix, “Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients,” Acta Materialia, vol. 53, pp. 1821–1830, 2005. View at Publisher · View at Google Scholar
  6. D. Kiener, W. Grosinger, G. Dehm, and R. Pippan, “A further step towards an understanding of size-dependent crystal plasticity: in situ tension experiments of miniaturized single-crystal copper samples,” Acta Materialia, vol. 56, no. 3, pp. 580–592, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. W. W. Gerberich, W. M. Mook, C. R. Perrey et al., “Superhard silicon nanospheres,” Journal of the Mechanics and Physics of Solids, vol. 51, no. 6, pp. 979–992, 2003. View at Publisher · View at Google Scholar · View at Scopus
  8. J. Rösler, D. Mukherji, K. Schock, and S. Kleindiek, “Forging of metallic nano-objects for the fabrication of submicron-size components,” Nanotechnology, vol. 18, no. 12, 2007. View at Publisher · View at Google Scholar
  9. S. W. Lee, S. M. Han, and W. D. Nix, “Uniaxial compression of fcc Au nanopillars on an MgO substrate: the effects of prestraining and annealing,” Acta Materialia, vol. 57, pp. 4404–4415, 2009. View at Publisher · View at Google Scholar
  10. J. Rösler, O. Näht, S. Jäger, F. Schmitz, and D. Mukherji, “Fabrication of nanoporous Ni-based superalloy membranes,” Acta Materialia, vol. 53, pp. 1397–1406, 2005. View at Publisher · View at Google Scholar
  11. D. Mukherji, G. Pigozzi, F. Schmitz, O. Näth, J. Rösler, and G. Kostorz, “Nano-structured materials produced from simple metallic alloys by phase separation,” Nanotechnology, vol. 16, pp. 2176–2187, 2005. View at Publisher · View at Google Scholar
  12. D. Mukherji, R. Müller, and R. Gilles, “Nanocrystalline Ni3Al-type intermetallic phase powder from Ni-base superalloys,” Nanotechnology, vol. 15, no. 5, pp. 648–657, 2004. View at Publisher · View at Google Scholar
  13. J. Schloesser, J. Rösler, and D. Mukherji, “Deformation behaviour of freestanding single-crystalline Ni3Al-based nanoparticles,” International Journal of Materials Research, vol. 102, no. 5, pp. 532–537, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. R. Maaß, L. Meza, B. Gan, S. Tin, and J. Greer, “Ultrahigh strength of dislocation-free Ni3Al Nanocubes,” Small, vol. 8, no. 12, pp. 1869–1875, 2012. View at Publisher · View at Google Scholar
  15. K. Harris, G. L. Erickson, S. L. Sikkenga, W. D. Brentnall, I. M. Aurrecoechea, and K. G. Kubarych, “Development of the rhenium containing superalloys CMSX-4 and CM186 LC for single crystal blade and directionally solidified vane applications in advanced turbine engines,” in Proceedings of the 7th International Symposium on Superalloy, K. A. Green, et al., Ed., pp. 297–306, 1992.
  16. H. Yasuda, T. Takasugi, and M. Koiwa, “Elasticity of Ni-based L12-type intermetallic compounds,” Acta Metallurgica et Materialia, vol. 40, pp. 381–387, 1992. View at Publisher · View at Google Scholar
  17. U. Bayerlein, Zur Ermittlung der Textur- und Gefügeabhängigkeit der elastischen Eigenschaften sowie der Einkristallkonstanten von Superlegierungen bei höheren Temperaturen, VDI, 1991.
  18. S. S. Brenner, “Tensile strength of whiskers,” Journal of Applied Physics, vol. 27, no. 12, pp. 1484–1491, 1956. View at Publisher · View at Google Scholar
  19. S. Shim, H. Bei, M. K. Miller, G. M. Pharr, and E. P. George, “Effects of focused ion beam milling on the compressive behavior of directionally solidified micropillars and the nanoindentation response of an electropolished surface,” Acta Materialia, vol. 57, pp. 503–510, 2009. View at Publisher · View at Google Scholar