- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Submit a Manuscript
- Subscription Information
- Table of Contents
Volume 2012 (2012), Article ID 275016, 15 pages
Feedback Control in Quantum Optics: An Overview of Experimental Breakthroughs and Areas of Application
Department of Physics & Astronomy, University College London, Gower Street, London WC1E 6BT, UK
Received 15 October 2012; Accepted 19 November 2012
Academic Editors: D. Kouznetsov and A. A. Sukhorukov
Copyright © 2012 Alessio Serafini. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
We present a broad summary of research involving the application of quantum feedback control techniques to optical setups, from the early enhancement of optical amplitude squeezing to the recent stabilisation of photon number states in a microwave cavity, dwelling mostly on the latest experimental advances. Feedback control of quantum optical continuous variables, quantum nondemolition memories, feedback cooling, quantum state control, adaptive quantum measurements, and coherent feedback strategies will all be touched upon in our discussion.
Quantum control is a broad field of study, engaging the engineering, mathematics, and physical sciences communities in an effort to analyse, design, and experimentally demonstrate techniques whereby the dynamics of physical systems operating at the quantum regime is steered towards desired aims by external, time-dependent manipulation [1, 2]. The development of advanced quantum control schemes is clearly central to the areas of quantum and nanotechnologies, whenever the main focus is on the exploitation of coherent quantum effects. Prominent among classical and quantum control techniques are the so-called feedback or closed-loop techniques [2, 3], where the manipulation applied on the system at a given time depends on its state in the past. Closed-loop quantum control is particularly well suited to fight decoherence (the nemesis of quantum information processing, whereby the system quantum coherence is lost through unwanted interaction with a large macroscopic environment) and stabilise quantum resources in the face of noise. It is therefore a very promising paradigm, which is attracting considerable attention.
Due to the high degree of coherent control, to the wide availability of well-established experimental techniques, and to the relatively low technical noise and decoherence enjoyed by optical setups, the quantum optics community has been in a position to pioneer most of the quantum control techniques developed so far and is still definitely at the forefront of such research. In particular, quantum optics allows for fast and relatively efficient detections in the quantum regime, for manipulations by control fields on time scales much shorter than the system’s typical dynamical time scales, as well as for efficient input-output interfaces (as for travelling modes impinging on optical cavities). These advantages make quantum optical systems particularly well suited for the implementation of closed-loop (“feedback”) control techniques, where some (classical or quantum) information is extracted from the system and used to condition the control operations. Feedback control is, in a sense, the next step in quantum control techniques, with the remarkable possibility of stabilising specific target states in the face of decoherence and noise. Also, feedback techniques can be applied to cool a number of diverse quantum degrees of freedom, and thus to help bringing them into the quantum regime. Over the last decade, several quantum optical demonstrations of feedback techniques have been achieved, climaxing with the recent, spectacular stabilisation of photon number states in a cavity QED setup  and enhanced optical phase estimation .
Our paper will follow a combined historical-contextual order. We shall start with the introduction of some basic terminology and notions concerning quantum feedback; next, we will move on to consider the measurement-based feedback control of quantum continuous variables in general, and then specialise our treatment to the important cases of quantum memories for continuous variables and feedback cooling; we will hence hit the deep quantum regime by considering the feedback control of highly coherent systems with few quantum excitations in cavity QED and linear optics setups; we will then review advances in adaptive measurement techniques in the context of optical quantum metrology; our last stop will be to consider the notion and experimental achievements in the subarea of coherent feedback; finally, we shall include some cursory outlook on research in the area. Note that we will emphasise primarily experimental achievements with quantum optical systems and, although partial reference to the accompanying theoretical literature will be provided, no attempt will be made at a comprehensive coverage of the vast general theoretical literature on quantum feedback control. For that, the reader may refer to textbooks with a broader scope [1, 2]. Also, we shall not cover the area of molecular control by pulse-shaping driven by adaptive feedback and evolutionary algorithms, for which the reader is referred to .
2. Basic Concepts and Terminology
We introduce here the fundamental notions required for a basic understanding of feedback control in quantum systems. We will limit ourselves to defining and briefly sketching some terminology and typical issues encountered. A detailed, systematic treatment may be found in [2, 7, 8]. A good introduction to continuously monitored quantum systems, including specific applications in quantum optics (fluorescence monitoring), is given in . See also  for a very recent overview of the theory.
Ideally, a closed quantum system can be prepared in a pure state vector (adopting Dirac notation) and then evolves unitarily under the action of some hermitian Hamiltonian operator , according to ( throughout the paper). In practice, except for a few exceptions in very special situations (typically polarisation degrees of freedom over very short transmission links), quantum degrees of freedom in the lab are not described by pure states, but rather by statistical mixtures of pure states, represented as . Even if the initial state is pure, the microscopic quantum system will interact with its bulky environment where part of the quantum information will, in most cases, irreversibly leak, thus ending up in a mixed state (a statistical mixture). However, there are situations where the environment of a quantum system can be accessed and monitored, in an attempt to retrieve the quantum information leaking out of the system (just consider, for instance, the monitoring of light leaking out of a cavity to obtain information about the state inside the cavity). In some cases, as we will see, the environment interacting with the system can even be engineered and used as a “meter,” through which the quantum system can be indirectly monitored (thanks to the correlations that the environment built up with the system during their previous interaction).
Assuming, for simplicity, that the global system-environment state was separable and pure at the beginning of the evolution, one has, after a time , , where is the interaction Hamiltonian between system and environment. Now, by projectively measuring the environment in the basis , one conditionally project (upon the occurrence of outcome ) the system on the (nonnormalised) state . In other words, the state of the system is kept pure and, up to normalisation, is acted upon by the linear operator : , with probability . This simple model actually describes the most general possible quantum measurement, also known as “positive operator valued measure” (POVM) , where the environment acts as a correlated meter. If the measurement outcome is not recorded (or if such recording is not possible in practice, as is the case with most noisy environments), the system's state evolves to a mixed statistical average encompassing all possible measurement results: . Constantly measuring (i.e., “monitoring”) the environment thus prevents the mixing due to the system-environment interaction and allows one to “unravel” the open system dynamics into a set of pure state “quantum trajectories.” The unravelling, always related to a measurement process, and the ensuing quantum trajectories are key concepts in the theory of monitored open quantum systems. Notice that, while the conditioned state (after a measurement) does depend on the particular measurement chosen, the average unconditioned state must obviously be independent from such a choice and represents the deterministic open system dynamics.
The conditional evolution, being dependent on the outcome of quantum measurements, involves a fundamental probabilistic element. In order to describe such a dynamics, one has hence to define appropriate stochastic increments (if the monitoring is continuous) or “quantum jumps” [12, 13]. The evolution of the conditioned, pure states is then governed by a stochastic Schrödinger equation, involving a deterministic part and stochastic increments (governed by Ito calculus, see  for details). When averaged over all the possible realisations of the stochastic elements, the stochastic Schrödinger equation reduces to a deterministic master equation describing the evolution of the mixed state of the system. The stochastic Schrödinger equations which differ only by the choice of measurement carried out on the environment (in the system-meter picture sketched above) reduce to the same master equation, solely determined by the form of the interaction between system and environment and are said to provide different quantum unravellings of such a master equation.
This probabilistic element in the dynamics, whereby the quantum trajectories (i.e., the pure conditional states) evolve continuously but not differentiably in time, is the expression of the fundamental probabilistic nature of quantum states and is referred to as the “back-action” noise induced by the measurement process. In this context, especially in relation to quantum control, it is relevant to introduce the notion of “strength” of a quantum measurement. The strongest possible class of measurements is represented by projective measurements, where the operators defined above are projectors on a basis of orthogonal states of the system . Such measurements provide one with the maximum amount of information on the state, but are also maximally destructive in the sense that, once the measurement occurs, the system abruptly jumps to the new pure state (von Neumann postulates), often erasing the system's state before the measurement (which merely influences the probability of outcome ). The weakest conceivable measurement is instead the one where all the are multiple of the identity operator. Such a (trivial) measurement process corresponds to leaving the quantum system alone and does not reveal any information about the system (in fact, if the system state is unknown, it will still be completely unknown after the measurement), but is also clearly the measurement implying minimal disturbance. Nonprojective POVMs interpolate between these two extreme classes of measurements. In general, for a POVM, the greater the information gained about the state of the system, the greater the disturbance induced, a heuristic principle which is customarily referred to as the “information-disturbance trade-off” . For the purpose of realising measurement-based feedback control, with the typical aim of stabilising quantum states in the face of noise and decoherence, repeated “weak” measurements , where the information gain is relatively low but the state remains largely undisturbed, are typically a suitable choice.1 In the system-meter model which was briefly reviewed above, where the meter and the system interact and the meter is then projectively measured, the strength of the measurement is strictly related to the strength of the correlations between system and meter (the “environment” in the argument above). If the system and the meter are in a separable, product state, then measuring the meter does not provide one with any information whatsoever about the system, and one is reduced to the trivial weakest case. If the system and the environment are instead maximally correlated (“maximally entangled”), then a projection of the environment on a properly chosen basis will realise a nondestructive projective measurement on the system as well (a so-called “nondemolition” measurement ). Other intermediate cases (weak measurements and POVMs) can be formally obtained for other choices of the basis and other entangled states. In practice, let us notice that sometimes the feasible measurements might not be represented by rank 1 projection to start with (as would be the case for an avalanche photodiode which just distinguishes between zero photons and any positive number of photons), and these arguments must then be carefully revisited in such cases. They do, however, provide valid general guidelines to understand the central issues involved in the study of monitored quantum systems.
After the monitoring, measurement-based feedback loops are typically closed by actuators that apply coherent quantum manipulations on the system where some parameter depends on the measurement outcome at the previous step. Ideally, such actuators act on time-scales which are fast with respect to the system dynamics (and so do the detectors).
In this paper, we will refer to state control, whenever the feedback loop is aimed at obtaining, and possibly stabilizing, a particular target state, or to optimise a given resource (like quantum correlations or purity). This is opposed to operator control, where the objective of the control procedure is to reproduce a given quantum operation on the system (irrespective of the initial state). We shall also distinguish between “measurement-based” feedback, where the system is monitored and then manipulated with operations that depend on the measurement outcome (such that the information gleaned from the system and used in its subsequent manipulation is classical) and “coherent” feedback, where the system interacts coherently with an ancillary subsystem, which is then manipulated and fed back into the system through another coherent interaction (in which case, the information extracted from the system and used in its subsequent manipulation is “quantum information”). See Figure 1 for a pictorial representation of this distinction.
3. Feedback Control of Quantum Continuous Variables
In quantum optics, the light quadratures (the quantum counterparts of electric and magnetic fields of electromagnetic waves) may be treated as canonical quantum operators and , obeying the commutation relation . Notice that this is completely equivalent to the description of a motional degree of freedom of a quantum particle in first quantisation (with and representing the position and momentum of the particle). All the quantum degrees of freedom satisfying canonical commutation relations are collectively referred to as “quantum continuous variables,” due to the continuous spectra of eigenvalues of the canonical operators (a terminology which took hold with the advent of quantum information science, where such systems are contrasted with discrete variables on finite dimensional Hilbert spaces, like two-level systems, usually known as “qubits”). Quantum continuous variables, due to their analogue nature, are not typical systems of choice for quantum computing architectures (although proposals in such a direction do exist ), but they are very interesting for quantum communication and metrology, and can be exploited, in their optical manifestation, for unconditionally secure quantum key distribution [18, 19].
It is in fact a metrological application of light fields, namely, the interferometric detection of gravitational waves, that first sparkled the quest for the production of nonclassical, squeezed states [16, 20]. Squeezed states are states where the uncertainty on one of the two canonical quadratures is reduced below the vacuum uncertainty, implying an obvious advantage for sensing and precision measurements.2 To the best of our knowledge, the earliest demonstration of measurement-based feedback control of a quantum system was achieved in a purely optical continuous variable setting, to obtain amplitude-squeezed light . In this experiment, the weak, quantum nondemolition measurement of the photon number was achieved via optical Kerr effect, and then fed back into the laser pumping rate to achieve squeezing of its fluctuation. Sub-Poissonian statistics of the final light, as well as a remarkable degree of squeezing (around 7 dB, measured from the spectral density of the photocurrent fluctuations) were thus obtained.
Such early all-optical developments, and more broadly the general interest in quantum optics and in the generation of squeezed light, motivated the establishment of a fully quantum theory of continuously monitored systems and feedback control, mainly tied to quantum optical settings and to measurement processes accessible to light fields (essentially homodyne and heterodyne detections, and their derivations). This eventually led to a theory that can be expressed in terms of quantum Langevin equations in the Heisenberg picture or “general-dyne” unravellings and stochastic Schrödinger equations in the Schrödinger picture . The first full-fledged theory of continuously monitored and feedback controlled quantum systems is due to Belavkin [22–24]. Other early theoretical treatments for quantum optical fields were developed in the eighties [25, 26]. Feedback control based on homodyne detection was studied in , while a general theory encompassing stochastic evolution equations for quantum states and quantum Langevin equations for the fields was presented in [28–30]. The most general “dyne-unravelling” was characterised in , while optimal control for linear quadratic Gaussian state control problems was shown to reduce to semidefinite programming in . An alternative approach to continuous feedback using optimal state estimation was introduced in , while the relationships between quantum and classical feedback control are further elucidated in . The theory of feedback control was extended from all-optical settings to include atoms in . Quite interestingly, the study  elaborates on the relationship between quantum error correction schemes and feedback control.
The interest in the production of squeezed light has not dwindled since the eighties. Quite on the contrary, it has been further strengthened by the clarification, in the context of continuous variable quantum information, of the relationship between squeezing, Einstein-Podolski-Rosen correlations, and quantum entanglement [37, 38]. The feedback-assisted generation of quantum squeezing by homodyne feedback had already been suggested in the early days of feedback control theory . The generation of the steady-state optical continuous variable entanglement in the framework of general-dyne unravellings was instead first considered in [40, 41], where a homodyne-based strategy was shown to enhance the performance of a parametric oscillator (see the end of Section 5 for analogous studies with discrete quantum optical variables). Such a scheme was proved to be optimal among all possible general-dyne unravellings in . More recently, these studies have been extended to incorporate thermal noise  and to consider the generation of entanglement between output travelling modes  (“out-of-loop” quantum entanglement, as opposed to “in-loop,” intracavity steady-state results). The generation of nonclassical superpositions by continuous feedback in optical settings has also been investigated . Notwithstanding the undeniable theoretical and applied appeal of squeezed light, the practical application of feedback techniques to its generation in all-optical setups has not been pursued after the aforementioned early attempt by Yamamoto et al. . This is arguably due to the fact that spontaneous parametric down conversion [46–48] has proven sufficient for most purposes so far , discouraging most experimental groups from dealing with the technical difficulties involved in the implementation of measurement-based feedback loops. As we shall see, some such setups have instead recently started to tread the path of coherent feedback control.
There are, however, two areas, quantum nondemolition atomic quantum memories and cooling of quantum mechanical oscillators, where the measurement-based feedback control of continuous variables has found favourable ground for experimental implementation.
4. Continuous Variable QND Memories
A well-known approach to the storage and retrieval of the quantum state of a travelling light field employs the collective interaction of light with atomic ensembles contained in room temperature vapour cells . Each atom in the ensemble couples to light via a well-defined optical transition, whose two levels constitute an effective two-level system (usually referred to as a “pseudo-spin,” in analogy with two-level spin electronic systems). Now, for a macroscopic number of atoms whose two levels are highly polarised (e.g., when almost all atoms are in the ground state), the collective degree of freedom defined as the sum of all the pseudospin operators is well approximated by a pair of canonical operators, by virtue of the so-called Holstein-Primakoff transformation . The continuous variable state of light crossing the cell can hence be mapped into the ensemble, and subsequently retrieved. This setup allowed for the demonstration of genuine quantum storage of coherent states , quantum teleportation between light and matter , and coherent quantum storage of squeezed and entangled states . The development of effective quantum memories is a key step towards the operation of quantum repeaters, in turn a stringent requirement on the road towards realistic, long-range quantum communication , and the optimisation of such devices has hence attracted much experimental and theoretical work [55–57].
Although the coherent interaction would already correlate the atomic ensemble with the light passing through it, the operation of these continuous variables memories is actually optimised by a measurement-based feedback loop. The formal description of this feedback scheme is rather simple and illustrates very well the action of homodyne feedback on quantum fields. It is therefore worthwhile to sketch it here (see  for details). In the QND (quantum nondemolition) regime, light interacts with the atoms in a lambda system configuration, whose excited level is adiabatically eliminated resulting in an effective “Faraday” interaction between the atomic ( and ) and light ( and ) quadratures proportional to . Such an interaction is also referred to as QND, because it would in principle allow one to monitor the atomic quadrature by measuring the light quadrature . This opportunity is in a sense exploited in the feedback loop, as we shall explain below. After one passage of the light mode through the ensemble, the Heisenberg dynamics relating the input light quadratures and and the initial atomic quadratures and to the output light quadratures and and final atomic quadratures and is described by the following equations: where is a coupling strength depending on passage time and other dynamical parameters. As apparent, only the quadrature is somehow mapped by the dynamics to an atomic quadrature, while an ideal mapping would require and (which is equivalent to perfect mapping up to an irrelevant optical phase). Since such a mapping cannot be realised with the input-output relationships above, the memory operation is improved by feedback control: the output light quadrature is monitored (through a measurement equivalent to homodyne detection), and the measurement result is then fed back as a linear driving with gain on the atomic quadrature . It can be rigorously shown that this corresponds to the operatorial transformation . By applying such a transformation on the input-output relationship for the atomic operators above, and setting , one obtains The mapping is thus effected, up to a coherent squeezing factor , and to additional noise deriving from the uncertainty on the initial atomic quadrature . The latter could be in principle reduced (typically by preliminary feedback control on the atomic ensemble [50, 58, 59]), in which case would achieve near perfect mapping.
Atomic QND memories, operating at room temperature according to the principles sketched above, surpassed the quantum threshold (beating any possible classical “measure and prepare” strategy [60–62]) in the storage of both coherent and displaced squeezed states [51, 53]. Note that feedback-assisted QND memories are an instance of operator, rather than state, control (where the ideal operation is the swap between light and atomic ensemble). This is to the best of our knowledge the only implementation of feedback assisted quantum operator control to date. In the context of quantum memories, it is worth mentioning that dedicated theoretical studies, such as , have been devoted to the suppression of dynamics by feedback control (see also , for a review on error correcting techniques for quantum memories).
5. Quantum Feedback Cooling
The past ten years have seen a widespread and intense effort by the physics community to achieve ground state cooling of massive harmonic oscillators. Such a line of research, drawing its origins from gravitational wave detectors, holds considerable promise for applications in precision sensing , in the realisation of quantum memories and transducers (devices coupling different quantum degrees of freedom ), in the test of fundamental state reduction models [67, 68], and in the exploration of the quantum to classical boundary [69, 70]. The most promising avenue towards the realisation of genuine quantum behaviour with massive degrees of freedom is certainly optomechanics, a paradigm whereby a material harmonic oscillator (typically a suspended mirror) is coupled to cavity light modes, which can be used by various techniques to drain its energy out, and thus achieve cooling [71, 72]. Cooling being just a specific form of state control, where stabilisation in the presence of thermal noise is clearly desirable, its application in this context has obviously been thoroughly considered in both theory and practice. In tie with the context of this paper, we shall only restrict our discussion to active feedback control and will disregard what the opto-mechanical literature has at times referred to as “passive” feedback cooling [73, 74].3
Although similar techniques had long been mastered in the classical regime , the idea of using feedback cooling in opto-mechanics was pioneered in the late nineties , and the so-called “cold damping” technique (see Figure 2), where the velocity of the oscillator is continuously tracked by phase-sensitive homodyne measurements on the outgoing light and then a negative driving force is applied on it, simulating friction, was demonstrated soon afterwards . An overview of early approaches to feedback cooling in the opto-mechanical context may be found in , while a detailed comparison between cavity cooling and cold damping, including optimal operating regimes, may be found in . There, it is shown that cold damping is favourable in the bad cavity limit. In fact, one of the most convincing applications of cold damping to date was achieved in the cooling of a motional degree of freedom of a single trapped ion, where average occupations down to 3 excitations seem to be within reach . Such a setup enjoys the major advantage, over standard optomechanics, of not involving a cavity for light. Phase sensitive detection, analogous to homodyning, was implemented by modulating the ion's fluorescence with a retroreflecting mirror. Active control was actuated by acting on the trap electrodes, in general a notable control possibility available in ion traps [84–87]. In cavity mediated setups, cold damping of a micromechanical resonator down to 5 K was demonstrated in  and improved to 100 mK in . Soon afterwards, an oscillator of about 1 g was cooled down to the mK region by cold damping, as reported in .
Analogous techniques, employing active measurement-based feedback control and often called “parametric cooling” (where the control parameter is generally different from case to case), were also recently applied to cool cantilevers , gravitational wave detectors , electromechanical quartz resonators , and levitated micro- and nanoparticles [94, 95], although none of such systems have yet been brought into the deep quantum regime by cold damping so far. Feedback cooling and control schemes have also been proposed and studied in detail for Bose-Einstein condensates [96–98].
6. State Control by Measurement-Based Feedback in the Deep Quantum Regime
With few exceptions, the experimental achievements covered so far, while genuinely “quantum” in that they are subject to measurement back-action and act on quantum variables, operate in a semiclassical regime, where the quantum fluctuations are small with respect to the average fields. We will now move on to demonstrations in the deep quantum regime, where fields and matter are controlled down to a few quanta.
Cavity QED systems, where high finesse cavity light, typically in the microwave region, is strongly coupled with flying or trapped atoms, is arguably one of the most controllable quantum systems and has hence an outstanding pedigree in the demonstration of quantum information and control primitives [99–101].4
It should therefore come as no surprise that the first demonstration of deep quantum feedback control techniques was achieved with a cavity QED setup  (see also  for an extended study). In this early experiment, a thermal beam of Rubidium atoms was sent through a cavity weakly driven at a frequency resonant with an atomic transition, thus coupling the atoms strongly with the cavity field but keeping the maximum number of excitations inside the system very low (around two). The state was then conditioned upon the measurement of a photon leaking out of the cavity mirrors, and then actively controlled by applying a change in the driving intensity after a pre-determined time from the measurement (estimated thanks to the detailed knowledge of the atom-light dynamics). It was hence possible to demonstrate, in terms of the measured intensity correlation function, the freezing of the conditional dynamics for the duration of the control pulse, and then to subsequently resume the Rabi oscillations of the system. Although only triggered by a single measurement outcome (detection of a photon), and hence intrinsically nondeterministic, and involving a single predetermined operation (such that the only factor determined by the measurements in real time was the timing of the intensity change), this experiment was the first to single out and partially control a conditional state (a “quantum trajectory”) in the full quantum regime. Notice that the measurement is effectively weak, in that it is based on the detection of an output photon which had been previously coupled to the internal field through the mirrors. However, this experimental demonstration did not go so far as to stabilise a quantum state through feedback control.
Further advances in feedback state control have made use of qubits (two-level quantum systems) encoded in the polarisation of travelling photons. These linear optical setups have been extremely successful since the early days of quantum information, enjoying low decoherence rates and ample possibilities for coherent manipulations on single qubits. They were in fact employed in the earliest demonstrations of quantum teleportation [104, 105]. More recently, the implementation of entangling quantum gates on two such qubits has also been reported [106–108], including controlled-Z (CZ) gates, which will be relevant in what follows. In , the approximate recovery of a polarisation state after the application of a noisy channel has been demonstrated by a single shot quantum feedback procedure. The qubit was prepared in one of two possible nonorthogonal states, and underwent dephasing through a probabilistic Z gate. It was then observed by the application of an entangling CZ with another meter qubit, which was then projectively measured, thus effecting the weak measurement on the system qubit. A tuneable coherent coefficient in the initial state of the meter qubit allowed one to range from (strong) nondemolition projective measurements on the system qubit to the trivial no measurement case, spanning a whole class of dichotomic (two outcomes) POVMs in between. After the dichotomic measurement, the feedback loop was closed by applying a unitary operation whose sign was dependent on the measurement outcome (a rotation in the axis of the Bloch sphere, conditionally implemented by means of a Pockels cell). By tomographic reconstruction of the final states, this experiment showed that, in this particular setting, weak measurements outperform “do nothing” and projective measurement-based strategies in terms of average overlap between the reconstructed and initial quantum states. While not yet capable to stabilise a target state, and only applying to the single shot recovery of specific states subject to specific forms of discrete noisy channels, this demonstration constituted a remarkable advance in terms of the control demonstrated in the implementation of weak measurement processes. It should be noted that a similar scheme with qubits in a linear optical setup, based on analogous measurements by ancillary projection and feed forward, had been previously realised to obtain minimum disturbance weak measurements , whose realisation had already been envisaged in .5
For the first experimental demonstration of real-time steady state control by measurement-based feedback, we have to turn back to a cavity QED setup, one with a remarkable track record of experimental achievements over the last 20 years [4, 99, 112–114]. The experiment reported in  consists in the stabilisation, by iterated feedback loops, of a photon number (Fock) state in a superconducting microwave cavity. The meter subsystem, in this case, is represented by a beam of rubidium atoms crossing the cavity and interacting dispersively with the cavity light field, such that the global atom-cavity light state acquires phases depending on the photon number in the cavity. A subsequent phase sensitive detection of the atom then reveals partial information about the photon number in the cavity, and such information is used to steer the cavity field state to the desired number state by coupling the cavity to a classical current whose intensity and phase can be modulated to optimise the overlap with the desired target state. Although the implementation of this experiment is clearly very delicate given the high degree of coherent control demanded and requires to take several noise factors and potential imperfections into account, the idealised underlying theoretical treatment is rather simple, and worth describing in some detail (see  for a rigorous discussion). The unitary operation acting on the atom-light system during each atomic passage through the cavity is given by , where is phase determined by passage time and coupling strength, is the cavity field number operator (at the near resonant frequency), while acts on the ground () and excited () atomic states according to , . The cavity is sandwiched by an atomic Ramsey interferometer where the atomic states are coherently rotated before and after crossing the cavity, with a tuneable relative phase : assuming that the initial state of each atom is , the first auxiliary cavity turns the atomic state into . The initial global cavity light-atomic state is then given by where the initial state of the cavity is assumed to be any pure state (it is actually a coherent state in the experiment, but such a detail is irrelevant to our current argument), and stands for an eigenvector of the number operator: . The interaction during passage through the cavity entangles the state of the cavity field with that of light, giving the new global state: (with for ). In the second Ramsey cavity, the state of the atoms is rotated again, according to and (setting for simplicity ), so that the global state turns into It is now apparent that a measurement of the atom in the basis (realised by a field-ionisation detector after the Ramsey interferometer) would make the atomic state collapse into the (unnormalised) state or This can be expressed by stating that the projective measurement of the atomic meter effects the dichotomic POVM described by the operators and (where the tuneable interferometric phase , omitted for simplicity in the derivation above, has been reinstated). After each measurement, given the outcome , the quantum state in the cavity is updated as per , and a CPU-based controller estimates the value and sign of the optimal optical displacement to apply to the cavity field in order to maximise the figure of merit at each step. Here, is the target number state.
This experiment demonstrated final fidelities of about 0.8 for Fock states , , , and , reached in times of the order of 50 ms in the presence of decoherence due to photon losses and thermal photons (even in a cryogenic environment, the average number of thermal photons at the frequencies adopted is still 0.05, and hence not completely negligible). The accuracy of the experiment is still limited, first and foremost, by the limited efficiency of the atomic detectors (around 35%), as well as by the irregularities in the atomic beam (atoms might be missing every now and again). Even so, this demonstration constitutes a notable advancement on the application of feedback control to a quantum optical setup, and well exemplifies the potentialities of such control techniques. It is probably relevant to emphasize that Fock states, being deeply quantum (as opposed, for instance, to intense coherent states, whose statistics can be mimicked to a good extent by classical light), are a very desirable ingredient in the implementation of several quantum communication protocols, for instance, whenever a reliable single photon source is required [116, 117]. Fock states are also extremely fragile in the face of decoherence [113, 118, 119] (see  for a theoretical treatment of the decoherence of number states and superpositions thereof), and the quest for their generation on demand has been long and riddled with difficulties [121–124]. A feasible scheme which allows for their stabilisation in the presence of quantum noise, while still imperfect, is therefore a significant step forward in quantum state preparation and control. Such measurement-based schemes for the generation of nonclassical schemes are to be contrasted with measurement-free ones, such as those suggested in [125, 126].
The feedback scheme of  has been further refined, utilising the same setup, in a very recent experiment . Here, the weak detection is still implemented through flying Rydberg atoms interacting with the cavity field, but the actuator is capable of changing, in real time and for variable time intervals, the form of the atom-light interaction inside the cavity, switching from dispersive to resonant couplings, and thus correcting directly for the leakage of one quantum inside the cavity due to loss (the atoms are also previously pumped in the excited state while the interaction is resonant, such that they can yield an excitation to the field). This allowed for demonstrating the stabilisation of number states up to and is, arguably, the most explicit demonstration of measurement-based quantum feedback state control to date (in that the coherent Hamiltonian control is not limited to applying additional operations, but act directly on the form of the meter-system coupling in order to counteract decoherence).
On the theoretical side, it is worth noting that schemes to achieve and preserve highly entangled steady states between internal atomic degrees of freedom, analogous to those discussed for continuous variables in Section 2, have been proposed, analysed, and extended to multipartite setups in [128–130].
7. Adaptive Measurements
Alongside their potential for the control of quantum states and operations, feedback techniques have also found application in precision measurements and quantum metrology in optical setups. It has long been known that, because of the uncertainty relations, quantum mechanics impose bounds on the attainable precision of quantum measurements . Assuming the vacuum (or ground state, for a mechanical harmonic oscillator) uncertainty as the fundamental unit of error, one obtains the so-called “standard quantum limit” to the statistical precision of a measurement process, characterised by a scaling of the precision ( being the number of “resources,” such as repetitions of the measurement). It has however also been noted that such a limit can be beaten by adopting squeezing or, more subtly, quantum entanglement, a remark that has given rise to the subfield of quantum metrology  (see also  for a more recent review). Note that, although the standard quantum limit can be beaten, the ultimate precision allowed by quantum mechanics is still bound by the so-called Heisenberg limit, which sets the ultimate scaling of on the precision compatible with the uncertainty principle.
Besides the recourse to optimised nonclassical states, it has also long been known that the adoption of feedback techniques enhances the precision of quantum measurements. The notion of “adaptive” quantum measurement was first formulated in a quantum optical setting by considering the estimate of the phase of an optical mode , where it was pointed out that a homodyne scheme where the latest estimate of the phase is fed back in real time to continuously adjust the local oscillator phase would beat a nonadaptive heterodyne strategy (the method of choice for phase estimation until then). The superiority of the adaptive homodyne scheme for optical phase estimation was experimentally demonstrated with weak coherent states in . A number of theoretical and experimental developments followed. An adaptive technique for the estimate of an interferometric phase difference was suggested in . The advantage offered in the estimate of noisy, fluctuating optical phases by adaptive strategies for coherent and (broad- and narrow-band) squeezed input states was further analysed in [137, 138]. The standard quantum limit in phase estimation was eventually beaten by using nonentangled single photon states and an algorithmic adaptive technique, which allowed essentially to reach the Heisenberg limit, as reported in . Continuous adaptive measurements were also applied to phase estimation by quantum smoothing, a “time-symmetric” postprocessing technique where the estimate at time is inferred based on both past (up until time ) and future (after time ) measurement records: such a technique allowed for a reduction by a factor 2.24 with respect to the standard quantum limit achievable by causal filtering . An adaptive interferometric scheme along the lines of  has been recently applied  to achieve phase estimation below the shot noise limit—yet another constraint implying a scaling precision in photon counting, due to the discrete nature of photons—by utilising heralded entangled states with a given number of photons (a generalisation of the NOON states, known to be optimal for phase estimation at the Heisenberg limit [132, 142]). It must be noted that such a scheme required some degree of postselection upon the final detection.
With the notable exception of , which however made use of postselection, most of the results discussed so far refer to phase sensing, where the phase to be estimated is known to lie within some given interval. The first demonstration of sub-Heisenberg phase tracking (i.e., the estimate of a completely unknown noisy optical phase), with no sort of data after processing nor theoretical compensation for imperfections, resorted to squeezed states and adaptive homodyne measurements where the phase of the local oscillator was updated in real time by Kalman filtering, which also provided the optimal estimate of the phase .6 The error on the estimate of the randomly fluctuating phase was around 15% below what could be obtained with coherent input states, an impressive achievement assuming no a priori information on the noise.
Adaptive quantum state estimation, where the objective is the reconstruction of a quantum state given a certain number of available copies, and whose efficiency was theoretically proven in , has also been very recently demonstrated in the laboratory with a linear optical setup .
Somewhat related to these developments are the demonstrations of state discrimination by adaptive measurements.7 Real-time feedback enhanced discrimination between optical coherent states was experimentally demonstrated in  while, in , adaptive measurements have been shown to beat locally optimal (i.e., optimised over single-shot measurements, see  for a theoretical discussion) strategies with single photons undergoing depolarising noise. These experiments are strictly related to the results presented in , where however a final outcome-dependent manipulation of the photons were performed, and which have hence been already discussed as cases of quantum state control (also, it must be emphasized that the experiments reported in [109, 110], while making use of a closed loop for the realisation of each individual run, are not based on properly “adaptive” detections). Broadly speaking, the key advantage offered by feedback control in the context of quantum estimation and metrology is the possibility of gaining a quantum advantage with limited recourse to fragile and elusive resources (such as NOON states). Finally, let us also draw the reader attention on an interesting systematic approach to adaptive measurements based on machine learning, introduced in .
8. Coherent Feedback Control
Measurement-based quantum feedback is based on the extraction of classical information from a quantum system to steer its subsequent control. Even when the latter is implemented through coherent manipulation, this approach is in principle suboptimal, because the quantum information contained in the system is for the most part not used to control it.8 This observation gave rise to the notion of coherent feedback control of a quantum system , which had already been envisaged in the nineties within a quantum optical scenario, under the name of “all-optical” feedback . Coherent control extracts part of the quantum information contained in the system by coherent interaction with an ancillary system; such a quantum information is subsequently coherently manipulated and then fed back to the system through coherent interaction. Notice that this approach is obviously free from measurement back-action noise on the system. Although many experiments have adopted procedures that can be partially assimilated to coherent feedback control, the first explicit demonstration of quantum state control based on a coherent feedback loop was given in an NMR setup .
In quantum optics, coherent feedback control can be typically implemented by letting the output of a cavity undergo some controlled coherent evolution and then feeding it back as a cavity input. These situations can be described by the so-called input-output formalism . A comprehensive theoretical treatment of very general multimode systems encompassing all linear canonical field transformations (also known as “Bogoliubov”, or “symplectic” transformations, including beam splitting, squeezing and phase shifting) and coherent feedback loops with finite delays based on input-output dynamics—as well as series (or cascade) connections—has been recently developed within the context of quantum quantum feedback networks [153–155], partially building on an existing approach [156, 157]. The optimisation of the production of steady-state squeezed light by coherent feedback was investigated in [157, 158], and experimentally demonstrated in , where the squeezing of an OPO (optical parametric oscillator) was enhanced from −1.64 dB to −2.20 dB by means of a coherent feedback loop where input coherent light was mixed with the OPO cavity output at a controlling beam splitter and then fed back into the OPO, in order to amplify the parametric oscillation. By considering a similar scheme, the enhancement of continuous variable optical entanglement by coherent feedback was quantitatively studied in . Very recently, it has also been shown that coherent feedback would improve the feedback cooling of mechanical oscillators [161, 162], a perspective which may open up new pathways for optomechanics (see Section 4).
Let us also mention that, over the past few years, considerable theoretical work has been devoted to the understanding of the open- and closed-loop coherent controllability of infinite dimensional bosonic systems, by [163, 164], linear , and symplectic  controllers. Such theoretical results are of direct interest to the coherent control of quantum optical setups.
The coherent control and manipulation of quantum systems is growing more and more central to quantum optics and, more broadly, to the whole physics community . In light of the promise feedback methods hold, the refinement, and extension to other fields and tasks, of the schemes designed and demonstrated so far is hence envisageable in the short and medium term. As a relevant example, feedback techniques based on strong measurements seem to be ripe for application with transmon qubits coupled to superconducting resonators (mimicking a QED system) . Outstanding opportunities are also still to be explored with coherent control strategies, such as their application to nanophotonics [169, 170].
A number of colleagues have helped the author, directly or indirectly (by collaboration on topics relevant to this paper), during the completion of this paper, among whom he would like to mention M. Barbieri, D. Vitali, F. Sciarrino, A. R. R. Carvalho, S. Mancini, and P. Barker. Special thanks go to M.G. Genoni, whose assistance at all stages of this endeavour was invaluable.
- Although it must be noted that there are strategies, based on the so-called Zeno dynamics , where repeated (strong) projective measurements have been proposed as a way to keep a state in a target pure state, without the need of any other active manipulation .
- Let us remind the reader that the variances (“uncertainties”) of canonical quadratures are constrained by the Heisenberg uncertainty principle: (in its simplest formulation).
- Such schemes, which are proving very successful, have been since understood to be equivalent to standard cavity cooling, in the sense that they use the cavity to preferentially scatter blue detuned photons, and hence extract energy from the harmonic oscillator in the process.
- Arguably, the advantages of standard QED set-ups are offset by difficulties in terms of scalability, especially with respect to integrated optical components of recent developments in the linear optical arena .
- It is also worth remarking that similar examples of single-shot “feedforward” manipulations are also employed in all forms of quantum teleportation, both with polarised photons [104, 105, 174] and in the continuous variable regime . This class of experiments, centred on the single-shot manipulation of quantum systems for the transmission of quantum information, is rather far in spirit from real-time feedback control and has hence been deemed outside the scope of the present discussion.
- A Kalman filter  is a standard recursive algorithm for classical and quantum state estimation, where the updated estimate at any time only depends on the estimate at the previous time-step and on the latest measurement result.
- By “state discrimination,” one refers to the task of distinguishing between different non-orthogonal quantum states with limited available resources (e.g., number of copies of the state). Note that no single-shot measurement can deterministically distinguish between two non-orthogonal quantum states.
- Let us remark that there exists no procedure capable of converting a single copy of an arbitrary quantum state into classical information.
- D. D'Alessandro, Introduction to Quantum Control and Dynamics, Taylor & Francis, New York, NY, USA, 2008.
- H. M. Wiseman and G. J. Milburn, Quantum Measurement and Control, Cambridge University Press, Cambridge, UK, 2010.
- K. Zhou, J. Doyle, and K. Glover, Robust and Optimal Control, Prentice-Hall, Englewood Clis, NJ, USA, 1996.
- C. Sayrin, I. Dotsenko, X. Zhou, et al., “Real-time quantum feedback prepares and stabilises photon number states,” Nature, vol. 477, p. 73, 2011.
- H. Yonezawa, D. Nakane, T. A. Wheatley et al., “Quantum-enhanced optical-phase tracking,” Science, vol. 337, no. 6101, pp. 1514–1517, 2012.
- H. Rabitz, “Focus on quantum control,” New Journal of Physics, vol. 11, Article ID 105030, 2009.
- C. W. Gardiner and P. Zoller, Quantum Noise, Springer, Berlin, Germany, 3rd edition, 2004.
- H. J. Carmichael, Statistical Methods in Quantum Optics. 2, Springer, Berlin, Germany, 2008.
- K. Jacobs and D. A. Steck, “A straightforward introduction to continuous quantum measurement,” Contemporary Physics, vol. 47, no. 5, pp. 279–303, 2006.
- L. D. Tóth, “Paradigms for quantum feedback control,” http://arxiv.org/abs/1210.0360.
- A. Peres, Quantum Theory: Concepts and Methods, vol. 57, Kluwer Academic, Dordrecht, The Netherlands, 1993.
- M. B. Plenio and P. L. Knight, “The quantum-jump approach to dissipative dynamics in quantum optics,” Reviews of Modern Physics, vol. 70, no. 1, pp. 101–144, 1998.
- H. P. Breuer, “Exact quantum jump approach to open systems in bosonic and spin baths,” Physical Review A, vol. 69, no. 2, Article ID 022115, 8 pages, 2004.
- K. Banaszek, “Fidelity balance in quantum operations,” Physical Review Letters, vol. 86, no. 7, pp. 1366–1369, 2001.
- Y. Aharonov and L. Vaidman, “Properties of a quantum system during the time interval between two measurements,” Physical Review A, vol. 41, no. 1, pp. 11–20, 1990.
- V. B. Braginsky, Y. I. Vorontsov, and K. S. Thorne, “Quantum nondemolition measurements,” Science, vol. 209, no. 445, pp. 547–557, 1980.
- N. C. Menicucci, P. Van Loock, M. Gu, C. Weedbrook, T. C. Ralph, and M. A. Nielsen, “Universal quantum computation with continuous-variable cluster states,” Physical Review Letters, vol. 97, no. 11, Article ID 110501, 4 pages, 2006.
- L. S. Braunstein and P. Van Loock, “Quantum information with continuous variables,” Reviews of Modern Physics, vol. 77, no. 2, pp. 513–577, 2005.
- J. L. O'Brien, A. Furusawa, and J. Vučković, “Photonic quantum technologies,” Nature Photonics, vol. 3, no. 12, pp. 687–695, 2009.
- D. F. Walls, “Squeezed states of light,” Nature, vol. 306, no. 5939, pp. 141–146, 1983.
- Y. Yamamoto, N. Imoto, and S. MacHida, “Amplitude squeezing in a semiconductor laser using quantum nondemolition measurement and negative feedback,” Physical Review A, vol. 33, no. 5, pp. 3243–3261, 1986.
- V. P. Belavkin, “Towards the theory of control in observable quantum systems,” http://arxiv.org/abs/quant-ph/0408003.
- V. Belavkin, “Nondemolition measurement and control in quantum dynamical systems,” in Information Complexity and Control in Quantum Physics, vol. 294, pp. 311–329, Springer, New York, NY, USA, 1987.
- V. P. Belavkin, “Eventum mechanics of quantum trajectories: continual measurements, quantum predictions and feedback control,” http://arxiv.org/abs/math-ph/0702079.
- H. A. Haus and Y. Yamamoto, “Theory of feedback-generated squeezed states,” Physical Review A, vol. 34, no. 1, pp. 270–292, 1986.
- J. H. ] Shapiro, G. Saplakoglu, S. -T. Ho, P. Kumar, B. E. A. Saleh, and M. C. Teich, “Theory of light detection in the presence of feedback,” Journal of the Optical Society of America B, vol. 4, p. 1604, 1987.
- H. M. Wiseman and G. J. Milburn, “Quantum theory of optical feedback via homodyne detection,” Physical Review Letters, vol. 70, no. 5, pp. 548–551, 1993.
- H. M. Wiseman, “Quantum theory of continuous feedback,” Physical Review A, vol. 49, no. 3, pp. 2133–2150, 1994.
- H. M. Wiseman, “Erratum: quantum theory of continuous feedback (Physical Review A (1994) 49, 3, (2133)),” Physical Review A, vol. 49, no. 6, 5159.
- H. M. Wiseman, “Erratum: quantum theory of continuous feedback [Phys. Rev. a 49, 2133 (1994)],” Physical Review A, vol. 50, no. 5, 4428.
- H. M. Wiseman and L. Diósi, “Complete parameterization, and invariance, of diffusive quantum trajectories for Markovian open systems,” Chemical Physics, vol. 268, no. 1–3, pp. 91–104, 2001.
- H. M. Wiseman and A. C. Doherty, “Optimal unravellings for feedback control in linear quantum systems,” Physical Review Letters, vol. 94, no. 7, Article ID 070405, 4 pages, 2005.
- A. C. Doherty and K. Jacobs, “Feedback control of quantum systems using continuous state estimation,” Physical Review A, vol. 60, no. 4, pp. 2700–2711, 1999.
- A. C. Doherty, S. Habib, K. Jacobs, H. Mabuchi, and S. M. Tan, “Quantum feedback control and classical control theory,” Physical Review A, vol. 62, no. 1, Article ID 012105, 13 pages, 2000.
- D. A. Steck, K. Jacobs, H. Mabuchi, T. Bhattacharya, and S. Habib, “Quantum feedback control of atomic motion in an optical cavity,” Physical Review Letters, vol. 92, no. 22, Article ID 223004, 4 pages, 2004.
- C. Ahn, A. C. Doherty, and A. J. Landahl, “Continuous quantum error correction via quantum feedback control,” Physical Review A, vol. 65, no. 4, Article ID 042301, 10 pages, 2002.
- M. M. Wolf, J. Eisert, and M. B. Plenio, “Entangling power of passive optical elements,” Physical Review Letters, vol. 90, no. 4, Article ID 047904, 4 pages, 2003.
- G. Adesso and F. Illuminati, “Entanglement in continuous-variable systems: recent advances and current perspectives,” Journal of Physics A, vol. 40, no. 28, pp. 7821–7880, 2007.
- H. M. Wiseman and G. J. Milburn, “Squeezing via feedback,” Physical Review A, vol. 49, no. 2, pp. 1350–1366, 1994.
- S. Mancini, “Markovian feedback to control continuous-variable entanglement,” Physical Review A, vol. 73, no. 1, Article ID 010304, 4 pages, 2006.
- S. Mancini and H. M. Wiseman, “Optimal control of entanglement via quantum feedback,” Physical Review A, vol. 75, no. 1, Article ID 012330, 10 pages, 2007.
- A. Serafini and S. Mancini, “Determination of maximal gaussian entanglement achievable by feedback-controlled dynamics,” Physical Review Letters, vol. 104, no. 22, Article ID 220501, 4 pages, 2010.
- M. G. Genoni, S. Mancini, and A. Serafini, “Driving linear systems to non-classical states with the help of noise,” http://arxiv.org/abs/1203.3831.
- H. I. Nurdin and N. Yamamoto, “Distributed entanglement generation between continuous-mode Gaussian fields with measurement-feedback enhancement,” Physical Review A, vol. 86, no. 2, Article ID 022337, 12 pages, 2012.
- A. Negretti, U. V. Poulsen, and K. Mølmer, “Quantum superposition state production by continuous observations and feedback,” Physical Review Letters, vol. 99, no. 22, Article ID 223601, 4 pages, 2007.
- L. A. Wu, H. J. Kimble, J. L. Hall, and H. Wu, “Generation of squeezed states by parametric down conversion,” Physical Review Letters, vol. 57, no. 20, pp. 2520–2523, 1986.
- Z. Y. Ou, S. F. Pereira, and H. J. Kimble, “Realization of the Einstein-Podolsky-Rosen paradox for continuous variables in nondegenerate parametric amplification,” Applied Physics B, vol. 55, no. 3, pp. 265–278, 1992.
- Z. Y. Ou, S. F. Pereira, H. J. Kimble, and K. C. Peng, “Realization of the Einstein-Podolsky-Rosen paradox for continuous variables,” Physical Review Letters, vol. 68, no. 25, pp. 3663–3666, 1992.
- K. Hammerer, A. S. Sørensen, and E. S. Polzik, “Quantum interface between light and atomic ensembles,” Reviews of Modern Physics, vol. 82, no. 2, pp. 1041–1093, 2010.
- Z. Kurucz and K. Mølmer, “Multilevel Holstein-Primakoff approximation and its application to atomic spin squeezing and ensemble quantum memories,” Physical Review A, vol. 81, no. 3, Article ID 032314, 11 pages, 2010.
- B. Julsgaard, J. Sherson, J. I. Cirac, J. Flurášek, and E. S. Polzik, “Experimental demonstration of quantum memory for light,” Nature, vol. 432, no. 7016, pp. 482–486, 2004.
- J. F. Sherson, H. Krauter, R. K. Olsson et al., “Quantum teleportation between light and matter,” Nature, vol. 443, no. 7111, pp. 557–560, 2006.
- K. Jensen, W. Wasilewski, H. Krauter et al., “Quantum memory for entangled continuous-variable states,” Nature Physics, vol. 7, no. 1, pp. 13–16, 2011.
- C. Simon, M. Afzelius, J. Appel et al., “Quantum memories :A review based on the European integrated project Qubit Applications (QAP),” European Physical Journal D, vol. 58, no. 1, pp. 1–22, 2010.
- K. S. Choi, H. Deng, J. Laurat, and H. J. Kimble, “Mapping photonic entanglement into and out of a quantum memory,” Nature, vol. 452, no. 7183, pp. 67–71, 2008.
- A. I. Lvovsky, B. C. Sanders, and W. Tittel, “Optical quantum memory,” Nature Photonics, vol. 3, no. 12, pp. 706–714, 2009.
- H. Yadsan-Appleby and A. Serafini, “Would one rather store squeezing or entanglement in continuous variable quantum memories?” Physics Letters, Section A, vol. 375, no. 18, pp. 1864–1869, 2011.
- L. K. Thomsen, S. Mancini, and H. M. Wiseman, “Spin squeezing via quantum feedback,” Physical Review A, vol. 65, no. 6, Article ID 061801, 4 pages, 2002.
- T. Vanderbruggen, S. Bernon, A. Bertoldi, A. Landragin, and P. Bouyer, “Spin-squeezing and Dicke-state preparation by heterodyne measurement,” Physical Review A, vol. 83, no. 1, Article ID 013821, 8 pages, 2011.
- S. L. Braunstein, C. A. Fuchs, and H. J. Kimble, “Criteria for continuous-variable quantum teleportation,” Journal of Modern Optics, vol. 47, no. 2-3, pp. 267–278, 2000.
- K. Hammerer, M. M. Wolf, E. S. Polzik, and J. I. Cirac, “Quantum benchmark for storage and transmission of coherent states,” Physical Review Letters, vol. 94, no. 15, Article ID 150503, 4 pages, 2005.
- M. Owari, M. B. Plenio, E. S. Polzik, A. Serafini, and M. M. Wolf, “Squeezing the limit: quantum benchmarks for the teleportation and storage of squeezed states,” New Journal of Physics, vol. 10, Article ID 113014, 2008.
- F. Ticozzi and L. Viola, “Single-bit feedback and quantum-dynamical decoupling,” Physical Review A, vol. 74, no. 5, Article ID 052328, 11 pages, 2006.
- J. R. Wootton, “Quantum memories and error correction,” http://arxiv.org/abs/1210.3207.
- A. A. Geraci, S. B. Papp, and J. Kitching, “Short-range force detection using optically cooled levitated microspheres,” Physical Review Letters, vol. 105, no. 10, Article ID 101101, 4 pages, 2010.
- K. Stannigel, P. Rabl, A. S. Sørensen, P. Zoller, and M. D. Lukin, “Optomechanical transducers for long-distance quantum communication,” Physical Review Letters, vol. 105, no. 22, Article ID 220501, 4 pages, 2010.
- G. C. Ghirardi, A. Rimini, and T. Weber, “Unified dynamics for microscopic and macroscopic systems,” Physical Review D, vol. 34, no. 2, pp. 470–491, 1986.
- R. Penrose, “On gravity's role in quantum state reduction,” General Relativity and Gravitation, vol. 28, no. 5, pp. 581–600, 1996.
- W. Marshall, C. Simon, R. Penrose, and D. Bouwmeester, “Towards quantum superpositions of a mirror,” Physical Review Letters, vol. 91, no. 13, Article ID 130401, 4 pages, 2003.
- D. Kleckner, I. Pikovski, E. Jeffrey et al., “Creating and verifying a quantum superposition in a micro-optomechanical system,” New Journal of Physics, vol. 10, Article ID 095020, 2008.
- T. J. Kippenberg and K. J. Vahala, “Cavity optomechanics: back-action at the mesoscale,” Science, vol. 321, no. 5893, pp. 1172–1176, 2008.
- F. Marquardt and S. M. Girvin, “Optomechanics,” Physics, vol. 2, p. 40, 2009.
- S. Gigan, H. R. Böhm, M. Paternostro et al., “Self-cooling of a micromirror by radiation pressure,” Nature, vol. 444, no. 7115, pp. 67–70, 2006.
- O. Arcizet, P. F. Cohadon, T. Briant, M. Pinard, and A. Heidmann, “Radiation-pressure cooling and optomechanical instability of a micromirror,” Nature, vol. 444, no. 7115, pp. 71–74, 2006.
- D. E. Chang, C. A. Regal, S. B. Papp et al., “Cavity opto-mechanics using an optically levitated nanosphere,” Proceedings of the National Academy of Sciences of the United States of America, vol. 107, no. 3, pp. 1005–1010, 2010.
- P. F. Barker and M. N. Shneider, “Cavity cooling of an optically trapped nanoparticle,” Physical Review A, vol. 81, no. 2, Article ID 023826, 6 pages, 2010.
- O. Romero-Isart, M. L. Juan, R. Quidant, and J. I. Cirac, “Toward quantum superposition of living organisms,” New Journal of Physics, vol. 12, Article ID 033015, 2010.
- A. Ashkin and J. M. Dziedzic, “Feedback stabilization of optically levitated particles,” Applied Physics Letters, vol. 30, no. 4, pp. 202–204, 1977.
- S. Mancini, D. Vitali, and P. Tombesi, “Optomechanical cooling of a macroscopic oscillator by homodyne feedback,” Physical Review Letters, vol. 80, no. 4, pp. 688–691, 1998.
- P. F. Cohadon, A. Heidmann, and M. Pinard, “Cooling of a mirror by radiation pressure,” Physical Review Letters, vol. 83, no. 16, pp. 3174–3177, 1999.
- D. Vitali, S. Mancini, L. Ribichini, and P. Tombesi, “Mirror quiescence and high-sensitivity position measurements with feedback,” Physical Review A, vol. 65, no. 6, Article ID 063803, 9 pages, 2002.
- C. Genes, D. Vitali, P. Tombesi, S. Gigan, and M. Aspelmeyer, “Ground-state cooling of a micromechanical oscillator: comparing cold damping and cavity-assisted cooling schemes,” Physical Review A, vol. 77, no. 3, Article ID 033804, 9 pages, 2008.
- P. Bushev, D. Rotter, A. Wilson, et al., “Feedback cooling of single trapped ion,” Physical Review Letters, vol. 96, Article ID 043003, 2006.
- D. J. Heinzen and D. J. Wineland, “Quantum-limited cooling and detection of radio-frequency oscillations by laser-cooled ions,” Physical Review A, vol. 42, no. 5, pp. 2977–2994, 1990.
- A. Serafini, A. Retzker, and M. B. Plenio, “Manipulating the quantum information of the radial modes of trapped ions: linear phononics, entanglement generation, quantum state transmission and non-locality tests,” New Journal of Physics, vol. 11, Article ID 023007, 2009.
- A. Serafini, A. Retzker, and M. B. Plenio, “Generation of continuous variable squeezing and entanglement of trapped ions in time-varying potentials,” Quantum Information Processing, vol. 8, no. 6, pp. 619–630, 2009.
- K. R. Brown, C. Ospelkaus, Y. Colombe, A. C. Wilson, D. Leibfried, and D. J. Wineland, “Coupled quantized mechanical oscillators,” Nature, vol. 471, no. 7337, pp. 196–199, 2011.
- O. Arcizet, P. F. Cohadon, T. Briant et al., “High-sensitivity optical monitoring of a micromechanical resonator with a quantum-limited optomechanical sensor,” Physical Review Letters, vol. 97, no. 13, Article ID 133601, 4 pages, 2006.
- D. Kleckner and D. Bouwmeester, “Sub-kelvin optical cooling of a micromechanical resonator,” Nature, vol. 444, no. 7115, pp. 75–78, 2006.
- T. Corbitt, C. Wipf, T. Bodiya et al., “Optical dilution and feedback cooling of a gram-scale oscillator to 6.9 mK,” Physical Review Letters, vol. 99, no. 16, Article ID 160801, 4 pages, 2007.
- M. Poggio, C. L. Degen, H. J. Mamin, and D. Rugar, “Feedback cooling of a cantilever's fundamental mode below 5 mK,” Physical Review Letters, vol. 99, no. 1, Article ID 017201, 4 pages, 2007.
- A. Vinante, M. Bignotto, M. Bonaldi et al., “Feedback cooling of the normal modes of a massive electromechanical system to submillikelvin temperature,” Physical Review Letters, vol. 101, no. 3, Article ID 033601, 4 pages, 2008.
- J. Jahng, M. Lee, C. Stambaugh, W. Bak, and W. Jhe, “Active feedback cooling of massive electromechanical quartz resonators,” Physical Review A, vol. 84, no. 2, Article ID 022318, 5 pages, 2011.
- T. Li, S. Kheifets, and M. G. Raizen, “Millikelvin cooling of an optically trapped microsphere in vacuum,” Nature Physics, vol. 7, no. 7, pp. 527–530, 2011.
- J. Gieseler, B. Deutsch, R. Quidant, and L. Novotny, “Subkelvin parametric feedback cooling of a laser-trapped nanoparticle,” Physical Review Letters, vol. 109, no. 10, Article ID 103603, 5 pages, 2012.
- S. D. Wilson, A. R. R. Carvalho, J. J. Hope, and M. R. James, “Effects of measurement backaction in the stabilization of a Bose-Einstein condensate through feedback,” Physical Review A, vol. 76, no. 1, Article ID 013610, 6 pages, 2007.
- S. S. Szigeti, M. R. Hush, A. R. R. Carvalho, and J. J. Hope, “Continuous measurement feedback control of a Bose-Einstein condensate using phase-contrast imaging,” Physical Review A, vol. 80, no. 1, Article ID 013614, 11 pages, 2009.
- S. S. Szigeti, M. R. Hush, A. R. R. Carvalho, and J. J. Hope, “Feedback control of an interacting Bose-Einstein condensate using phase-contrast imaging,” Physical Review A, vol. 82, no. 4, Article ID 043632, 10 pages, 2010.
- J. M. Raimond, M. Brune, and S. Haroche, “Colloquium: manipulating quantum entanglement with atoms and photons in a cavity,” Reviews of Modern Physics, vol. 73, no. 3, pp. 565–582, 2001.
- R. Miller, T. E. Northup, K. M. Birnbaum, A. Boca, A. D. Boozer, and H. J. Kimble, “Trapped atoms in cavity QED: coupling quantized light and matter,” Journal of Physics B, vol. 38, no. 9, pp. S551–S565, 2005.
- H. Walther, B. T. H. Varcoe, B.-G. Englert, and Th. Becker, “Cavity quantum electrodynamics,” Reports on Progress in Physics, vol. 69, p. 1325, 2006.
- W. P. Smith, J. E. Reiner, L. A. Orozco, S. Kuhr, and H. M. Wiseman, “Capture and release of a conditional state of a cavity QED system by quantum feedback,” Physical Review Letters, vol. 89, no. 13, Article ID 133601, 4 pages, 2002.
- J. E. Reiner, W. P. Smith, L. A. Orozco, H. M. Wiseman, and J. Gambetta, “Quantum feedback in a weakly driven cavity QED system,” Physical Review A, vol. 70, no. 2, Article ID 023819, 6 pages, 2004.
- D. Bouwmeester, J. W. Pan, K. Mattle, M. Eibl, H. Weinfurter, and A. Zeilinger, “Experimental quantum teleportation,” Nature, vol. 390, no. 6660, pp. 575–579, 1997.
- D. Boschi, S. Branca, F. De Martini, L. Hardy, and S. Popescu, “Experimental realization of teleporting an unknown pure quantum state via dual classical and einstein-podolsky-rosen channels,” Physical Review Letters, vol. 80, no. 6, pp. 1121–1125, 1998.
- N. K. Langford, T. J. Weinhold, R. Prevedel, et al., “Demonstration of a simple entangling optical gate and its use in bell-state analysis,” Physical Review Letters, vol. 95, no. 21, Article ID 210504, 4 pages, 2005.
- N. Kiesel, C. Schmid, U. Weber, R. Ursin, and H. Weinfurter, “Linear optics controlled-phase gate made simple,” Physical Review Letters, vol. 95, no. 21, Article ID 210505, 4 pages, 2005.
- R. Okamoto, H. F. Hofmann, S. Takeuchi, and K. Sasaki, “Demonstration of an optical quantum controlled-NOT gate without path interference,” Physical Review Letters, vol. 95, no. 21, Article ID 210506, 4 pages, 2005.
- G. G. Gillett, R. B. Dalton, B. P. Lanyon et al., “Experimental feedback control of quantum systems using weak measurements,” Physical Review Letters, vol. 104, no. 8, Article ID 080503, 4 pages, 2010.
- F. Sciarrino, M. Ricci, F. De Martini, R. Filip, and L. M¡ta Jr., “Realization of a minimal disturbance quantum measurement,” Physical Review Letters, vol. 96, no. 2, Article ID 020408, 4 pages, 2006.
- M. G. Genoni and M. G. A. Paris, “Optimal quantum repeaters for qubits and qudits,” Physical Review A, vol. 71, no. 5, Article ID 052307, 5 pages, 2005.
- S. Gleyzes, S. Kuhr, C. Guerlin et al., “Quantum jumps of light recording the birth and death of a photon in a cavity,” Nature, vol. 446, no. 7133, pp. 297–300, 2007.
- C. Guerlin, J. Bernu, S. Deléglise et al., “Progressive field-state collapse and quantum non-demolition photon counting,” Nature, vol. 448, no. 7156, pp. 889–893, 2007.
- S. Deléglise, I. Dotsenko, C. Sayrin et al., “Reconstruction of non-classical cavity field states with snapshots of their decoherence,” Nature, vol. 455, no. 7212, pp. 510–514, 2008.
- H. Amini, A. Somaraju, I. Dotsenko, et al., “Feedback stabilization of discrete-time quantum systems subject to non-demolition measurements with imperfections and delays,” http://arxiv.org/abs/1201.1387.
- S. J. Van Enk, J. I. Cirac, and P. Zoller, “Photonic channels for quantum communication,” Science, vol. 279, no. 5348, pp. 205–208, 1998.
- H. K. Lo and H. F. Chau, “Unconditional security of quantum key distribution over arbitrarily long distances,” Science, vol. 283, no. 5410, pp. 2050–2056, 1999.
- H. Wang, M. Hofheinz, M. Ansmann, et al., “Measurement of the decay of fock states in a superconducting quantum circuit,” Physical Review Letters, vol. 101, no. 24, Article ID 240401, 4 pages, 2008.
- M. Brune, J. Bernu, C. Guerlin et al., “Process tomography of field damping and measurement of fock state lifetimes by quantum nondemolition photon counting in a cavity,” Physical Review Letters, vol. 101, no. 24, Article ID 240402, 4 pages, 2008.
- A. Serafini, S. De Siena, and F. Illuminati, “Decoherence of number states in phase-sensitive reservoirs,” Modern Physics Letters B, vol. 18, no. 14, pp. 687–695, 2004.
- B. T. H. Varcoe, S. Brattke, M. Weldinger, and H. Walther, “Preparing pure photon number states of the radiation field,” Nature, vol. 403, no. 6771, pp. 743–746, 2000.
- M. Hofheinz, E. M. Weig, M. Ansmann et al., “Generation of Fock states in a superconducting quantum circuit,” Nature, vol. 454, no. 7202, pp. 310–314, 2008.
- M. Hofheinz, H. Wang, M. Ansmann et al., “Synthesizing arbitrary quantum states in a superconducting resonator,” Nature, vol. 459, no. 7246, pp. 546–549, 2009.
- M. D. Eisaman, J. Fan, A. Migdall, and S. V. Polyakov, “Invited Review Article: single-photon sources and detectors,” Review of Scientific Instruments, vol. 82, no. 7, Article ID 071101, 25 pages, 2011.
- R. Lo Franco, G. Compagno, A. Messina, and A. Napoli, “Generating and revealing a quantum superposition of electromagnetic-field binomial states in a cavity,” Physical Review A, vol. 76, no. 1, Article ID 011804, 4 pages, 2007.
- R. Lo Franco, G. Compagno, A. Messina, and A. Napoli, “Efficient generation of N-photon binomial states and their use in quantum gates in cavity QED,” Physics Letters, Section A, vol. 374, no. 22, pp. 2235–2242, 2010.
- X. Zhou, I. Dotsenko, B. Peaudecerf et al., “Field locked to a fock state by quantum feedback with single photon corrections,” Physical Review Letters, vol. 108, no. 24, Article ID 243602, 5 pages, 2012.
- A. R. R. Carvalho and J. J. Hope, “Stabilizing entanglement by quantum-jump-based feedback,” Physical Review A, vol. 76, no. 1, Article ID 010301, 4 pages, 2007.
- A. R. R. Carvalho, A. J. S. Reid, and J. J. Hope, “Controlling entanglement by direct quantum feedback,” Physical Review A, vol. 78, no. 1, Article ID 012334, 10 pages, 2008.
- R. N. Stevenson, J. J. Hope, and A. R. R. Carvalho, “Engineering steady states using jump-based feedback for multipartite entanglement generation,” Physical Review A, vol. 84, no. 2, Article ID 022332, 8 pages, 2011.
- C. W. Helstrom, Quantum Detection and Estimation Theory, Academic Press, New York, NY, USA, 1976.
- V. Giovannetti, S. Lloyd, and L. Maccone, “Quantum-enhanced measurements: beating the standard quantum limit,” Science, vol. 306, no. 5700, pp. 1330–1336, 2004.
- V. Giovannetti, S. Lloyd, and L. MacCone, “Advances in quantum metrology,” Nature Photonics, vol. 5, no. 4, pp. 222–229, 2011.
- H. M. Wiseman, “Adaptive phase measurements of optical modes: going beyond the marginal Q distribution,” Physical Review Letters, vol. 75, no. 25, pp. 4587–4590, 1995.
- M. A. Armen, J. K. Au, J. K. Stockton, A. C. Doherty, and H. Mabuchi, “Adaptive homodyne measurement of optical phase,” Physical Review Letters, vol. 89, no. 13, Article ID 133602, 4 pages, 2002.
- D. W. Berry and H. M. Wiseman, “Optimal states and almost optimal adaptive measurements for quantum interferometry,” Physical Review Letters, vol. 85, no. 24, pp. 5098–5101, 2000.
- D. W. Berry and H. M. Wiseman, “Adaptive quantum measurements of a continuously varying phase,” Physical Review A, vol. 65, no. 4, Article ID 043803, 11 pages, 2002.
- D. W. Berry and H. M. Wiseman, “Adaptive phase measurements for narrowband squeezed beams,” Physical Review A, vol. 73, no. 6, Article ID 063824, 13 pages, 2006.
- B. L. Higgins, D. W. Berry, S. D. Bartlett, H. M. Wiseman, and G. J. Pryde, “Entanglement-free Heisenberg-limited phase estimation,” Nature, vol. 450, no. 7168, pp. 393–396, 2007.
- T. A. Wheatley, D. W. Berry, H. Yonezawa et al., “Adaptive optical phase estimation using time-symmetric quantum smoothing,” Physical Review Letters, vol. 104, no. 9, Article ID 093601, 4 pages, 2010.
- G. Y. Xiang, B. L. Higgins, D. W. Berry, H. M. Wiseman, and G. J. Pryde, “Entanglement-enhanced measurement of a completely unknown optical phase,” Nature Photonics, vol. 5, no. 1, pp. 43–47, 2011.
- H. Lee, P. Kok, and J. P. Dowling, “A quantum Rosetta stone for interferometry,” Journal of Modern Optics, vol. 49, no. 14-15, pp. 2325–2338, 2002.
- A. Fujiwara, “Strong consistency and asymptotic efficiency for adaptive quantum estimation problems,” Journal of Physics A, vol. 39, no. 40, pp. 12489–12504, 2006.
- R. Okamoto, M. Iefuji, S. Oyama et al., “Experimental demonstration of adaptive quantum state estimation,” Physical Review Letters, vol. 109, no. 13, Article ID 130404, 5 pages, 2012.
- R. L. Cook, P. J. Martin, and J. M. Geremia, “Optical coherent state discrimination using a closed-loop quantum measurement,” Nature, vol. 446, no. 7137, pp. 774–777, 2007.
- B. L. Higgins, B. M. Booth, A. C. Doherty, S. D. Bartlett, H. M. Wiseman, and G. J. Pryde, “Mixed state discrimination using optimal control,” Physical Review Letters, vol. 103, no. 22, Article ID 220503, 4 pages, 2009.
- A. Acín, E. Bagan, M. Baig, Ll. Masanes, and R. Muñoz-Tapia, “Multiple-copy two-state discrimination with individual measurements,” Physical Review A, vol. 71, no. 3, Article ID 032338, p. 5, 2005.
- A. Hentschel and B. C. Sanders, “Machine learning for precise quantum measurement,” Physical Review Letters, vol. 104, no. 6, Article ID 063603, 4 pages, 2010.
- S. Lloyd, “Coherent quantum feedback,” Physical Review A, vol. 62, no. 2, pp. 022108–022101, 2000.
- H. M. Wiseman and G. J. Milburn, “All-optical versus electro-optical quantum-limited feedback,” Physical Review A, vol. 49, no. 5, pp. 4110–4125, 1994.
- R. J. Nelson, Y. Weinstein, D. Cory, and S. Lloyd, “Experimental demonstration of fully coherent quantum feedback,” Physical Review Letters, vol. 85, no. 14, pp. 3045–3048, 2000.
- M. J. Collett and C. W. Gardiner, “Squeezing of intracavity and traveling-wave light fields produced in parametric amplification,” Physical Review A, vol. 30, no. 3, pp. 1386–1391, 1984.
- J. E. Gough, R. Gohm, and M. Yanagisawa, “Linear quantum feedback networks,” Physical Review A, vol. 78, no. 6, Article ID 062104, 11 pages, 2008.
- J. Gough and M. R. James, “Quantum feedback networks: hamiltonian formulation,” Communications in Mathematical Physics, vol. 287, no. 3, pp. 1109–1132, 2009.
- J. E. Gough, M. R. James, and H. I. Nurdin, “Squeezing components in linear quantum feedback networks,” Physical Review A, vol. 81, no. 2, Article ID 023804, 15 pages, 2010.
- M. Yanagisawa and H. Kimura, “Transfer function approach to quantum control-part I: dynamics of quantum feedback systems,” IEEE Transactions on Automatic Control, vol. 48, no. 12, pp. 2107–2120, 2003.
- M. Yanagisawa and H. Kimura, “Transfer function approach to quantum control—part II: control concepts and applications,” IEEE Transactions on Automatic Control, vol. 48, no. 12, pp. 2121–2132, 2003.
- J. E. Gough and S. Wildfeuer, “Enhancement of field squeezing using coherent feedback,” Physical Review A, vol. 80, no. 4, Article ID 042107, 8 pages, 2009.
- S. Iida, M. Yukawa, H. Yonezawa, N. Yamamoto, and A. Furusawa, “Experimental demonstration of coherent feedback control on optical field squeezing,” IEEE Transactions on Automatic Control, vol. 57, no. 8, pp. 2045–2050, 2012.
- Z. Yan, X. Jia, C. Xie, and K. Peng, “Coherent feedback control of multipartite quantum entanglement for optical fields,” Physical Review A, vol. 84, no. 6, Article ID 062304, 6 pages, 2011.
- R. Hamerly and H. Mabuchi, “Advantages of coherent feedback for cooling quantum oscillators,” Physical Review Letters, vol. 109, no. 17, Article ID 173602, 5 pages, 2012.
- R. Hamerly and H. Mabuchi, “Coherent controllers for optical-feedback cooling of quantum oscillators,” http://arxiv.org/abs/1206.2688.
- M. R. James, H. I. Nurdin, and I. R. Petersen, “H∞ control of linear quantum stochastic systems,” IEEE Transactions on Automatic Control, vol. 53, no. 8, pp. 1787–1803, 2008.
- A. I. Maalouf and I. R. Petersen, “Coherent H∞ control for a class of annihilation operator linear quantum systems,” IEEE Transactions on Automatic Control, vol. 56, no. 2, pp. 309–319, 2011.
- H. I. Nurdin, M. R. James, and I. R. Petersen, “Coherent quantum LQG control,” Automatica, vol. 45, no. 8, pp. 1837–1846, 2009.
- M. G. Genoni, A. Serafini, M. S. Kim, and D. Burgarth, “Dynamical recurrence and the quantum control of coupled oscillators,” Physical Review Letters, vol. 108, no. 15, Article ID 150501, 5 pages, 2012.
- Press Release of the Swedish Royal Academy of Sciences, http://www.nobelprize.org/nobel_prizes/physics/laureates/2012/press.html.
- M. Mirrahimi, B. Huard, and M. H. Devoret, “Strong measurement and quantum feedback for persistent Rabi oscillations in circuit QED experiments,” in Proceedings of the 51st IEEE Conference on Decision and Control, 2012.
- J. Kerckhoff, H. I. Nurdin, D. S. Pavlichin, and H. Mabuchi, “Designing quantum memories with embedded control: photonic circuits for autonomous quantum error correction,” Physical Review Letters, vol. 105, no. 4, Article ID 040502, 4 pages, 2010.
- H. Mabuchi, “Coherent-feedback control strategy to suppress spontaneous switching in ultra-low power optical bistability,” http://arxiv.org/abs/1101.3461.
- B. Misra and E. C. G. Sudarshan, “The Zeno's paradox in quantum theory,” Journal of Mathematical Physics, vol. 18, no. 4, pp. 756–763, 1976.
- J. M. Raimond, P. Facchi, B. Peaudecerf et al., “Quantum Zeno dynamics of a field in a cavity,” Physical Review A, vol. 86, no. 3, Article ID 032120, 15 pages, 2012.
- A. Politi, J. C. F. Matthews, M. G. Thompson, and J. L. O'Brien, “Integrated quantum photonics,” IEEE Journal on Selected Topics in Quantum Electronics, vol. 15, no. 6, pp. 1673–1684, 2009.
- S. Giacomini, F. Sciarrino, E. Lombardi, and F. De Martini, “Active teleportation of a quantum bit,” Physical Review A, vol. 66, no. 3, Article ID 030302, 5 pages, 2002.
- A. Furusawa, J. L. Sørensen, S. L. Braunstein, C. A. Fuchs, H. J. Kimble, and E. S. Polzik, “Unconditional quantum teleportation,” Science, vol. 282, no. 5389, pp. 706–709, 1998.
- D. Simon, Optimal State Estimation: Kalman, H infiNity, and Nonlinear Approaches, Wiley, Hoboken, NJ, USA, 2006.