About this Journal Submit a Manuscript Table of Contents
ISRN Organic Chemistry
Volume 2013 (2013), Article ID 526173, 6 pages
http://dx.doi.org/10.1155/2013/526173
Research Article

DABCO Catalyzed Synthesis of Xanthene Derivatives in Aqueous Media

Laboratory of Heterocycles, School of Studies in Chemistry & Biochemistry, Vikram University, Ujjain, Madhya Pradesh 456010, India

Received 25 January 2013; Accepted 14 February 2013

Academic Editors: V. P. Kukhar, G. Li, J. C. Menéndez, and Z. Wimmer

Copyright © 2013 Pradeep Paliwal et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

The reaction of 5,5-dimethylcyclohexane-1,3-dione with various heteroarylaldehydes afforded the corresponding heteroaryl substituted xanthene derivatives 1(a–f). The reaction proceeds via the initial Knoevenagel, subsequent Michael, and final heterocyclization reactions using 1,4-diazabicyclo[2.2.2]octane (DABCO) as a catalyst in aqueous media. The synthesized heteroaryl substituted xanthenes 1(a–f) reacted with malononitrile to obtain different alkylidenes 2(a–f). Short reaction time, environmentally friendly procedure, avoiding of cumbersome apparatus, and excellent yields are the main advantages of this procedure which makes it more economic than the other conventional methods.

1. Introduction

In the past few decades, the synthesis of new heterocyclic compounds has been a subject of great interest due to their wide applicability. The importance of multicomponent reactions in organic synthesis has been recognized, and considerable efforts have been focused on the design and development of one-pot procedures for the generation of libraries of heterocyclic compounds [1, 2]. Multicomponent reactions (MCRs) have emerged as an important tool for building of diverse and complex organic molecules through carbon-carbon and carbon-heteroatom bond formations taking place in tandem manner [3]. Particularly, in the last three decades a number of three- and four-component reactions have been developed [46].

Xanthene derivatives are very important heterocyclic compounds and have been widely used as dyes [7] and fluorescent materials for visualization of biomolecules and in laser technologies [8]. They have also been reported for their agricultural bactericide activity [9] and anti-inflammatory [10] and antiviral activity [11]. These compounds are also utilized as antagonists for paralyzing action of zoxazolamine and in photodynamic therapy [12]. Due to their wide range of applications, these compounds have received a great deal of attention in connection with their synthesis. A wide variety of methods for the preparation of the xanthenes have been reported [1319]. However, many of these methods are associated with several shortcomings such as long reaction times (16 h to 5 days), expensive reagents, harsh conditions, low product yields, and use of toxic organic solvents. Diazabicyclo[2.2.2]octane (DABCO) is an inexpensive, nontoxic, and commercially available catalyst that can be used in laboratory without special precautions [2022]. But, it has not been used as a catalyst in xanthene synthesis; only a few reports are therein the literature [2325]. This prompted us to develop a new synthetic method for heteroaryl substituted xanthenes using DABCO as a catalyst (see Scheme 1).

526173.sch.001
Scheme 1

With our continued interest in the synthesis of heterocyclic systems [26] and application of DABCO as a catalyst in organic synthesis [27] herein, we wish to report a facile condensation of heteroarylaldehyde, 5,5′-dimethyl-1,3-cyclohexanedione (dimedone), in the presence of catalytic amount of DABCO to produce a variety of 1,8-dioxo-octahydroxanthenes derivatives 1(a–f) (Scheme 2).

526173.sch.002
Scheme 2

2. Results and Discussion

In order to optimize the reaction conditions, the synthesis of compound 1d was used as a model reaction. Therefore, a mixture of 3-methyl thienaldehyde (1 mmol), 5,5-dimethyl cyclohexane-1,3-dione (2 mmol) in H2O was refluxed for an appropriate time as indicated by TLC using different amounts of DABCO (Table 1). The efficiency of the reaction is mainly affected by the amount of the catalyst. Traces of the product could be detected in the absence of this catalyst (entry 1), while good results were obtained in the presence of DABCO. The optimal amount of the catalyst was 10 mmol% (entry 6); the higher amount of the catalyst did not increase the yield noticeably (entry 7).

tab1
Table 1: Influence of the amounts of DABCO on the synthesis of 1d at reflux temperaturea.

The synthesized products 1(a–f) in Scheme 2 were further treated with malononitrile to obtain corresponding alkylidenes 2(a–f) by the Knoevenagel reaction. The reaction involves the attack of malononitrile on two carbonyl groups (C=O) of xanthene derivatives to form alkylidene malononitrile within 60 min. using DABCO as an organic catalyst (Scheme 3).

526173.sch.003
Scheme 3

In order to extend the range of substrates, we employed a wide range of aldehydes in the presence of 10 mmol% DABCO under similar conditions. It was found that this method is effective with a variety of substituted heteroarylaldehydes independent of the nature of the substituent on the heteroaromatic ring and obtained satisfactory results (Table 2).

tab2
Table 2: Synthesis of heteroaryl substituted xanthenes and its alkylidene derivativesa,b.

The formation of the products 1(a–f) was assumed to proceed via formation of a Knoevenagel product which on addition of 2nd molecule to give the Michael adduct intermediate was followed by cyclization reaction (Scheme 4). An α,α′-bis(arylidene)cycloalkanone A was first condensed with dimedone to afford the B on addition of 2nd molecule of dimedone; this step can be regarded as a Michael addition reaction. The intermediate B was cyclized by nucleophilic attack of the OH group on the C=C moiety and gave the expected products 1(a–f).

526173.sch.004
Scheme 4

3. Conclusion

In summary, we have reported an efficient, simple, convenient, and straightforward practical one-pot procedure for the synthesis of 1(a–f) in aqueous media. Reaction of malononitrile on the synthesized products 1(a–f) gave corresponding alkylidene derivatives 2(a–f) in good yields. All starting materials are readily available from commercial sources. Moreover, there is no need for dry solvents or protecting gas atmospheres. Using DABCO as a catalyst offers advantages including simplicity of operation, easy workup, time minimizing, and high yields of products. The procedure is very simple and can be used as an alternative to the existing procedures.

4. Experimental

4.1. General

The chemicals used in the synthesis of the octahydroxanthene-1,8-diones were obtained from the Merck and Aldrich Chemical Co. All chemicals and solvents used for the synthesis were of analytical reagent grade. Reactions were monitored by thin layer chromatography on 0.2 mm silica gel F-252 (Merck) plates. Melting points were determined by open capillary method and were uncorrected. 1H (400 MHz) and 13C (200 MHz) spectra were recorded on Bruker 3000 NMR spectrometer in CDCl3/DMSO-d6 (with TMS for 1H and CDCl3 as internal references) unless otherwise specified stated.

4.2. General Procedure for the Synthesis of Heteroaryl Substituted Xanthenes 1(a–f)

A mixture of 5-membered, heteroarylaldehyde (1 mmol), 5,5-dimethylcyclohexane-1,3-dione (2 mmol), and DABCO (10 mmol%) in H2O (20 mL) was refluxed for 30 min. The progress of the reaction was monitored by TLC. After completion of the reaction, the mixture was cooled to room temperature, and the solid was filtered off and washed with H2O. The crude product was purified by recrystallization from 95% ethanol.

4.3. General Procedure for the Synthesis of Alkylidenes 2(a–f)

A mixture of heteroaryl substituted xanthenes (1 mmol), malononitrile (2 mmol), and DABCO (10 mmol %) in H2O (20 mL) was stirred for 60 min. The progress of the reaction was monitored by TLC. After completion of the reaction, the mixture was cooled to room temperature and the solid was filtered off and washed with H2O. The crude product was purified by column chromatographic technique using hexane: ethyl acetate.

4.4. Spectral Data of Compounds

9-(Furan-2-yl)-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione (1a). 1H NMR (400 MHz, CDCl3) δ: 1.014 (s, 6H, 2×CH3), 1.084 (s, 6H, 2 × CH3), 2.235 (s, 4H, 2 × CH2), 2.425 (s, 4H, CH2), 4.941 (s, 1H, CH), 6.159–6.181 (m, 2H, Ar-H), 7.133–7.139 (d, 1H, Ar-H); IR ν: 3078 cm−1 (Ar-H), 2865 cm−1 (Aliph. C–H), 1730 cm−1 and 1673 cm−1 (C=O), 1602 cm−1 (C=C), 1180 cm−1 (C–O–C). Anal. calcd for C21H24O4: C 74.09, H 7.11; found C 74.03, H 7.07.

3,3,6,6-Tetramethyl-9-(5-methylfuran-2-yl)-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione (1b). 1H NMR (400 MHz, CDCl3) δ: 1.039 (s, 6H, 2 × CH3), 1.109 (s, 6H, 2 × CH3), 2.109 (s, 4H, 2 × CH2), 2.551 (s, 4H, CH2), 4.832 (s, 1H, CH), 6.108–6.226 (m, 2H, Ar-H), 3.228 (s, 3H, Ar-CH3); IR ν: 3109 cm−1 (Ar-H), 2905 cm−1 (Alih. C–H), 1722 cm−1 and 1688 cm−1 (C=O), 1630 cm−1 (C=C), 1172 cm−1 (C–O–C). Anal. calcd for C22H26O4: C 74.55, H 7.39; found C 75.28, H 6.88.

3,3,6,6-Tetramethyl-9-(thiophen-2-yl)-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione (1c). 1H NMR (400 MHz, CDCl3) δ: 1.208 (s, 12H, 4 × CH3), 2.109 (s, 4H, 2 × CH2), 2.401 (s, 4H, 2 × CH2), 4.622 (s, 1H, CH), 6.554 (d, 1H, Ar-H), 6.828 (d, 1H, Ar-H), 7.298 (dd, 1H, Ar-H); IR ν: 3135 (Ar-H), 2920 cm−1 (Aliph. C–H), 1716 cm−1 (C=O), 1648 cm−1 and 1620 cm−1 (C=C), 1108 cm−1 (C–O–C). Anal. calcd for C21H24O3S: C 70.75, H 6.79, S 8.99; found C 71.33, H 6.28, S 8.49.

3,3,6,6-Tetramethyl-9-(3-methylthiophen-2-yl)-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione (1d). 1H NMR (400 MHz, CDCl3) δ: 1.100 (s, 12H, 4 × CH3), 3.035 (s, 3H, Ar-CH3), 2.281 (s, 4H, 2 × CH2), 2.544 (s, 4H, 2 × CH2), 4.875 (s, 1H, CH), 6.478 (d, 1H, Ar-H), 6.824 (d, 1H, Ar-H); IR ν: 3042 cm−1 (Ar-H), 2963 cm−1 (C–H), 1730 cm−1 (C=O), 1607 cm−1 and 1588 cm−1 (C=C), 1150 cm−1 (C–O–C). Anal. calcd for C22H26O3S: C 71.32, H 7.07, S 8.65; found C 71.28, H 7.09, S 8.69.

3,3,6,6-Tetramethyl-9-(5-methylthiophen-2-yl)-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione (1e). 1H NMR (400 MHz, CDCl3) δ: 1.288 (s, 12H, 4 × CH3), 2.988 (s, 3H, Ar-CH3), 2.448 (s, 4H, 2 × CH2), 2.722 (s, 4H, 2 × CH2), 4.658 (s, 1H, CH), 6.234 (d, 1H, Ar-H), 6.775 (d, 1H, Ar-H); IR ν: 3090 cm−1 (Ar-H), 2882 cm−1 (Aliph. C–H), 1716 cm−1 (C=O), 1632 cm−1 and 1610 cm−1 (C=C), 1148 cm−1 (C–O–C). Anal. calcd for C22H26O3S: C 71.32, H 7.07, S 8.65; found C 71.54, H 7.68, S 9.14.

3,3,6,6-Tetramethyl-9-(1H-pyrrol-2-yl)-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione (1f). 1H NMR (400 MHz, CDCl3) δ: 1.018–1.146 (m, 12H, 4 × CH3), 2.154 (br s, 8H, 4 × CH2, 5.601 (s, 1H, CH), 6.957–6.970 (s, 1H, Ar-H), 6.698–6.710 (d, 1H, Ar-H), 6.162 (dd, 1H, Ar-H), 9.570 (br s, 1H, NH); IR ν: 3397 cm−1, 3328 cm−1 (N–H), 3065 cm−1 (Ar-H), 2978v (Aliph. C–H), 1680 cm−1 (C=O), 1604 cm−1 and 1469 cm−1 (C=C), 1145 cm−1 (COC). Anal. calcd for C21H25NO3: C 74.31, H 7.42, N 4.13; found C 74.26, H 7.46, N 4.15.

2,2-(3,3,6,6-Tetramethyl-9-(furan-2-yl)-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-diylidene)dimalononitrile (2a).1H NMR (400 MHz, CDCl3) δ: 1.016 (s, 6H, 2 × CH3), 1.128 (s, 6H, 2 × CH3), 2.246 (s, 4H, 2 × CH2), 2.665 (s, 4H, CH2), 4.941 (s, 1H, CH), 6.154–6.188 (m, 2H, Ar-H), 7.138–7.144 (d, 1H, Ar-H); IR ν: 3078 cm−1 (Ar-H), 2865 cm−1 (aliph. C–H), 2224 cm−1 (CN), 1716 cm−1 and 1684 cm−1 (C=O), 1620 cm−1 (C=C), 1154 cm−1 (C–O–C). Anal. calcd for C27H24N4O2: C 74.29, H 5.54, N 12.84; found C 73.82, H 5.69, N 12.09.

2,2-(3,3,6,6-Tetramethyl-9-(5-methylfuran-2-yl)-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-diylidene)dimalononitrile (2b).1H NMR (400 MHz, CDCl3) δ: 0.986 (s, 6H, 2 × CH3), 1.235 (s, 6H, 2 × CH3), 2.244 (s, 4H, 2 × CH2), 2.658 (s, 4H, CH2), 4.988 (s, 1H, CH), 6.159–6.181 (m, 2H, Ar-H), 3.286 (s, 3H, Ar-CH3); IR ν: 3058 cm−1 (Ar-H), 2944 cm−1 (Aliph. C–H), 2224 cm−1 (CN), 1714 cm−1 and 1682 cm−1 (C=O), 1622 cm−1 (C=C), 1144 cm−1 (C–O–C). Anal. calcd for C28H26N4O2: C 74.65, H 5.82, N 12.44; found C 75.11, H 6.08, N 11.88.

2,2-(3,3,6,6-Tetramethyl-9-(thiophen-2-yl)-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-diylidene)dimalononitrile (2c).1H NMR (400 MHz, CDCl3) δ: 1.029 (s, 6H, 2 × CH3), 1.208 (s, 6H, 2 × CH3), 2.248 (s, 4H, 2 × CH2), 2.659 (s, 4H, CH2), 4.745 (s, 1H, CH), 6.686–6.789 (m, 2H, Ar-H), 7.252–7.263 (d, 1H, Ar-H); IR ν: 3078 cm−1 (Ar-H), 2988 cm−1 (Aliph. C–H), 2224 cm−1 (CN), 1710 cm−1 and 1688 cm−1 (C=O), 1626 cm−1 (C=C), 1164 cm−1 (C–O–C). Anal. calcd for C27H24N4OS: C 71.65, H 5.35, N 12.84, S 7.09; found C 71.18, H 5.74, N 12.12, S 7.83.

2,2-(3,3,6,6-Tetramethyl-9-(3-methylthiophen-2-yl)- 3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-diylidene)dimalononitrile (2d).1H NMR (400 MHz, CDCl3) δ: 1.044 (s, 6H, 2 × CH3), 1.301 (s, 6H, 2 × CH3), 2.144 (s, 4H, 2 × CH2), 2.656 (s, 4H, CH2), 4.886 (s, 1H, CH), 6.136–6.172 (m, 2H, Ar-H), 3.114 (s, 3H, Ar-CH3); IR ν: 3098 cm−1 (Ar-H), 2898 cm−1 (Aliph. C–H), 2224 cm−1 (CN), 1710 cm−1 and 1682 cm−1 (C=O), 1663 cm−1 (C=C), 1156 cm−1 (C–O–C). Anal. calcd for C28H26N4OS: C 72.07, H 5.62, N 12.01, S 6.87; found C 71.12, H 5.28, N 12.84, S 7.15.

2,2-(3,3,6,6-Tetramethyl-9-(5-methylthiophen-2-yl)- 3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-diylidene)dimalononitrile (2e).1H NMR (400 MHz, CDCl3) δ: 1.022 (s, 6H, 2 × CH3), 1.308 (s, 6H, 2 × CH3), 2.224 (s, 4H, 2 × CH2), 2.538 (s, 4H, CH2), 4.908 (s, 1H, CH), 6.108–6.191 (m, 2H, Ar-H), 3.257 (s, 3H, Ar-CH3); IR ν: 3086 cm−1 (Ar-H), 2910 cm−1 (Aliph. C–H), 2224 cm−1 (CN), 1728 cm−1 and 1692 cm−1 (C=O), 1605 cm−1 (C=C), 1162 cm−1 (C–O–C). Anal. calcd for C28H26N4OS: C 72.07, H 5.62, N 12.01, S 6.87; found C 71.43, H 5.12, N 12.77, S 7.25.

2,2-(3,3,6,6-Tetramethyl-9-(pyrrol-2-yl)-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-diylidene)dimalononitrile (2f).1H NMR (400 MHz, CDCl3) δ: 1.022 (s, 6H, 2 × CH3), 1.063(s, 6H, 2 × CH3), 2.268 (s, 4H, 2 × CH2), 2.569 (s, 4H, CH2), 4.858 (s, 1H, CH), 6.168–6.198 (m, 2H, Ar-H), 7.124–7.138 (d, 1H, Ar-H), 8.986 (br s, 1H, NH); IR ν: 3064 cm−1 (Ar-H), 2936 cm−1 (Aliph. C–H), 2224 cm−1 (CN), 1710 cm−1 and 1678 cm−1 (C=O), 1619 cm−1 (C=C), 1166 cm−1 (COC). Anal. calcd for C21H24O4: C 74.46, H 5.79; found C 74.12, H 6.08.

Acknowledgments

The authors are thankful to the Director of SAIF, IIT Mumbai, for spectral analysis and Dr. Asutosh K. Pandey, Department of Engineering Chemistry, Oriental University Indore (M.P.), for valuable suggestions.

References

  1. R. V. A. Orru and M. De Greef, “Recent advances in solution-phase multicomponent methodology for the synthesis of heterocyclic compounds,” Synthesis, no. 10, pp. 1471–1499, 2003. View at Scopus
  2. A. Domling, “Recent developments in isocyanide-based multicomponent reactions in applied chemistry,” Chemical Reviews, vol. 106, no. 1, pp. 17–89, 2006. View at Publisher · View at Google Scholar
  3. A. Domling and I. Ugi, “Multicomponent reactions with isocyanides,” Angewandte Chemie International Edition, vol. 39, no. 18, pp. 3168–3210, 2000. View at Publisher · View at Google Scholar
  4. J. Peng, W. Hao, X. Wang, S. Tu, N. Ma, and G. Zhang, “Microwave-assisted synthesis of pyrazolo[4,3-f]quinolin-7-one derivatives via multi-component reactions,” Chinese Journal of Chemistry, vol. 27, no. 9, pp. 1707–1710, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. L. F. Tietze, H. Evers, and E. Töpken, “A novel concept in combinatorial chemistry in solution with the advantages of solid-phase synthesis: formation of N-betaines by multicomponent domino reactions,” Angewandte Chemie International Edition, vol. 40, no. 5, pp. 903–905, 2001. View at Publisher · View at Google Scholar
  6. T. Masquelin, H. Bui, B. Brickley, G. Stephenson, J. Schwerkoske, and C. Hulme, “Sequential Ugi/Strecker reactions via microwave assisted organic synthesis: novel 3-center-4-component and 3-center-5-component multi-component reactions,” Tetrahedron Letters, vol. 47, no. 17, pp. 2989–2991, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Djandé, M. Kiendrébéogo, M. Compaoré et al., “Antioxidant potential of 4-acyl isochroman-1, 3-diones,” Research Journal of Chemical Sciences, vol. 1, no. 5, pp. 88–90, 2011.
  8. S. M. Menchen, S. C. Benson, J. Y. L. Lam et al., Patent, US, 6583168, 2003.
  9. C. G. Knight and T. Stephens, “Xanthene-dye-labelled phosphatidylethanolamines as probes of interfacial pH. Studies in phospholipid vesicles,” Biochemical Journal, vol. 258, no. 3, pp. 683–689, 1989. View at Scopus
  10. A. K. Bhattacharya and K. C. Rana, “Microwave-assisted synthesis of 14-aryl-14H-dibenzo[a.j]xanthenes catalysed by pTSA in solution and solvent-free conditions,” Mendeleev Communications, vol. 17, no. 4, pp. 247–248, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. G. Mulongo, J. Mbabazi, B. Odongkara, H. Twinomuhwezi, and G. B. Mpango, “New biologically active compounds from 1, 3-diketones,” Research Journal of Chemical Sciences, vol. 1, no. 3, pp. 102–108, 2011.
  12. Z. Karimi-Jaberi and M. M. Hashemi, “One step synthesis of 14-alkyl- or aryl-14H-dibenzo[a,j]xanthenes using sodium hydrogen sulfate as catalyst,” Monatshefte fur Chemie, vol. 139, no. 6, pp. 605–608, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. M. Seyyedhamzeh, P. Mirzaei, and A. Bazgir, “Solvent-free synthesis of aryl-14H-dibenzo[a,j]xanthenes and 1,8-dioxo-octahydro-xanthenes using silica sulfuric acid as catalyst,” Dyes and Pigments, vol. 76, no. 3, pp. 836–839, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Q. Wang and R. G. Harvey, “Synthesis of polycyclic xanthenes and furans via palladium-catalyzed cyclization of polycyclic aryltriflate esters,” Tetrahedron, vol. 58, no. 29, pp. 5927–5931, 2002. View at Publisher · View at Google Scholar · View at Scopus
  15. G. Casiraghi, G. Casnati, M. Catellani, and M. A. A. Corina, “Convenient one-step synthesis of xanthene derivatives,” Synthesis, no. 8, pp. 564–564, 1974.
  16. S. Gupta, P. Gupta, A. Sachar, and R. L. Sharma, “Synthetic studies of some varied structural systems of biologically potent polynitrogen heteropolycyclics,” Indian Journal of Chemistry B, vol. 49, no. 9, pp. 1243–1256, 2010. View at Scopus
  17. M. H. Majid, A. Hamideh, B. Khadijeh, S. Mina, A. O. Hossein, and F. B. Fatemeh, “Solvent-free synthesis of xanthenes derivatives by preyssler type heteropolyacid,” Bulletin of Chemical Society of Ethiopia, vol. 25, no. 3, pp. 399–406, 2011.
  18. K. Muharrem, “Aldol condensation and michael addition of 4, 4-dimethylcyclohexane-1, 3-dione and aromatic aldehydes. Unconventional substituent effects,” Chinese Journal of Chemistry, vol. 29, no. 11, pp. 2355–2360, 2011. View at Publisher · View at Google Scholar
  19. A. Ilangovan, S. Malayappasamy, S. Muralidharan, and S. Maruthamuthu, “A highly efficient green synthesis of 1, 8-dioxooctahydroxanthenes,” Chemistry Central Journal, vol. 5, pp. 81–86, 2011. View at Publisher · View at Google Scholar
  20. B. Baghernejad, “4-Diazabicyclo [2,2,2] octane (DABCO) as a useful catalyst in organic synthesis,” European Journal of Chemistry, vol. 1, no. 1, pp. 54–60, 2010. View at Publisher · View at Google Scholar
  21. H. Yang, R. Tian, and Y. Li, “Organic reactions catalyzed by 1, 4-diazabicyclo [2.2.2] octane (DABCO),” Frontiers of Chemistry in China, vol. 3, no. 3, pp. 279–287, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. X. Da-Zhen, Y. Liu, S. Shi, and Y. Wang, “A simple, efficient and green procedure for Knoevenagel condensation catalyzed by [C4dabco][BF4] ionic liquid in water,” Green Chemistry, vol. 12, no. 3, pp. 514–517, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. M. Bigdeli, “Clean synthesis of 1,8-dioxooctahydroxanthenes promoted by DABCO-bromine in aqueous media,” Chinese Chemical Letters, vol. 21, no. 10, pp. 1180–1182, 2010. View at Publisher · View at Google Scholar · View at Scopus
  24. B. Saeed, R. Sorour, B. Morteza, and H. G. Jurgen, “DABCO-catalyzed efficient synthesis of naphthopyran derivatives via one-pot three-component condensation reaction at room temperature,” Synthetic Communications, vol. 38, no. 7, pp. 1078–1089, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. K. Y. Lee, J. M. Kim, and J. N. Kim, “Synthesis of 2,3,4,4a-tetrahydroxanthen-1-ones and 3,3a-dihydro-2H-cyclopenta[b]chromen-1-ones from the reaction of salicylaldehydes and 2-cyclohexen-1-one and 2-cyclopenten-1-one,” Bulletin of the Korean Chemical Society, vol. 24, no. 1, pp. 17–18, 2003. View at Scopus
  26. S. Jain, G. N. Babu, S. R. Jetti, S. Harshada, and D. Suryaprakash, “Synthesis, antitubercular and antifungal activities of heteroaryl -substituted oxirance derived from Baylis-Hillman adducts,” Medicinal Chemistry Research, vol. 21, no. 10, pp. 2744–2748, 2012. View at Publisher · View at Google Scholar
  27. S. Jain, P. Paliwal, and G. N. Babu, “DABCO promoted one-pot synthesis of dihydro pyrano(c) chromene and pyrano[2, 3-d]pyrimidine derivatives and their biological activities,” Journal of Saudi Chemical Society, 2011. View at Publisher · View at Google Scholar