- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Submit a Manuscript
- Subscription Information
- Table of Contents
ISRN Physical Chemistry
Volume 2012 (2012), Article ID 724230, 11 pages
Calculation of Thermal Pressure Coefficient of Lithium Fluid by Data
Department of Chemistry, Payame Noor University, P.O. Box 19395-3697, Tehran, Iran
Received 20 September 2012; Accepted 9 October 2012
Academic Editors: F. M. Cabrerizo, H. Reis, and E. B. Starikov
Copyright © 2012 Vahid Moeini. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
For thermodynamic performance to be optimized, particular attention must be paid to the fluid’s thermal pressure coefficients and thermodynamics properties. A new analytical expression based on the statistical mechanics is derived for thermal pressure coefficients of dense fluids using the intermolecular forces theory to be valid for liquid lithium as well. The results are used to predict the parameters of some binary mixtures at different compositions and temperatures metal-nonmetal lithium fluid which agreement with experimental data. In this paper, we have used newly presented parameters of analytical expressions based on the statistical mechanics and predicted the metal-nonmetal transition for liquid lithium. The repulsion term of the effective pair potential for lithium shows well depth at 1600 K, and the position of well depth maximum is in agreement with X-ray diffraction and small-angle X-ray scattering.
Lithium and its compounds have several industrial applications, including heat-resistant glass and ceramics, high strength-to-weight alloys used in aircraft, lithiumbatteries, and lithium-ion batteries. These uses consume more than half of lithium production. Trace amounts of lithium are present in all organisms. The element serves no apparent vital biological function, since animals and plants survive in good health without it. The lithium ion Li+ administered as any of several lithium salts has proved to be useful as a mood-stabilizing drug due to neurological effects of the ion in the human body [1–3].
An important concept in physical chemistry concerns the representation of the force between two molecules by means of a potential energy function. In dense systems this is complex because a molecule in a condensed phase is at all times close to several other molecules. The total intermolecular energy is consequently large, and the properties of these states depend strongly on the nature of the intermolecular forces. When several molecules are simultaneously close to each other, their total energy is not exactly equal to the sum of the pair energies, which would be observed if each pair was isolated. Due to the fact that the relations between the external pressure and the internal pressure properties are known in principle, it is clear that the study of dense systems can provide valuable information about the intermolecular interactions. However, the relation between the intermolecular potential and the measurable properties of a fluid is quite complex. Only a few experimental methods are available for determination of the molecular interactions [4–6]. The most direct methods are relationships among several physical-chemical parameters which by the intermolecular interactions can be obtained.
A relationship that has recently been derived for dense fluids is the internal pressure regularity, which is linear with respect to for each isotherm, where is the molar density, is the internal energy, and is the molar volume . The internal pressure regularity, which was originally devised for normal dense fluids, is based on the cell theory and considers only nearest adjacent interaction. The regularity is applied well to Lennard-Jones fluids whose interaction potential can be modeled rather accurately by the (12–6) powers of inverse of the intermolecular distance. Lennard-Jones potential function suitably describes the interactions between the molecules of a fluid under the condition that it behaves as a normal fluid. The internal pressure regularity was attempted to calculate the internal pressure by modeling the average configurationally potential energy and then taking its derivative with respect to volume [7, 8].
The other work is an expression which is known as thermal pressure coefficient of dense fluids (Ar, N2, CO, CH4, C2H6, n-C4H10, iso-C4H10, C6H6, and C6H5–CH3) [9–15]. Only, experimental data have been used for the calculation of thermal pressure coefficients .
The second is a relationship to predict metal-nonmetal transitions in cesium fluid. An accurate empirical potential was found for dense cesium fluid and used to test the applicability of the theory. These theoretical predictions are in good agreement with experimental results [17–20].
The third is the internal pressure of sodium, potassium, and rubidium attempting to predict X-ray diffraction and small-angle X-ray scattering to the range where the compressibility of the interacting electron gas has been theoretically predicted to become negative. Problems have led us to try to establish a function for the accurate calculation of the internal pressure and the prediction of metal-nonmetal transition alkali metals based on the internal pressure .
The thermal pressure coefficient is one of the most important fundamental properties; it is closely related to various properties such as internal pressure, sonic velocity, the entropy of melting, isothermal compressibility, isobaric expansibility, and so on. Thus, the study of thermal pressure coefficient could provide a useful basis for understanding the nature of liquid. Since it is normally difficult to obtain the properties by thermodynamic methods and statistical mechanics methods due to the complex interactions among molecules, experimental methods attracted much attention. A lot of experimental data and correlation functions have been obtained in previous research. The thermal pressure coefficient was introduced to calculate different thermodynamic and volumetric properties for a wide range of fluids including polar, nonpolar, refrigerants, and hydrogen-bonded fluids. It has been also applied for metallic liquids mixtures and ionic liquids. The thermal pressure coefficient is used to calculate isothermal compressibility, thermal expansivity, and ultrasonic velocity of fluids. These results were applied widely in industry and would further accelerate the development of thermodynamic theory. Generally the thermal pressure coefficient may be expressed as functions of temperature and volume. Equations of state are often used to study the thermal pressure coefficient. There are two main types for calculation of the thermal pressure coefficient: one is the Virial type and its derivatives; the other is the Van der Waals type and its derivatives [22–24].
In this paper, a new analytical expression which is based on the statistical mechanics is derived for thermal pressure coefficients of dense fluids using the intermolecular forces theory extended to predict intermolecular interactions of lithium liquid. This equation works very well for all types of dense fluids, for densities greater than the Boyle density but for temperatures below twice the Boyle temperature. The regularity was originally suggested on the basis of a simple lattice-type model applied to a Lennard-Jones (12,6) fluid [25, 26]. In present paper, the new parameters of temperature dependency have been used to predict the metal-nonmetal transition of lithium metal. We also use the new parameters of temperature dependency for calculation of the thermal pressure coefficient (TPC) for liquid lithium by data. In contrast, in Section 2.1, we present a simple method that keeps first-order temperature dependency of parameters in the equation of state versus inverse temperature. Then, thermal pressure coefficient is derived by data. In Section 2.2, the empirical equations of state explicit in the Helmholtz energy as a function of density and temperature have been developed for the representation of experimental data of the thermal pressure coefficient of lithium fluid. In Section 2.3, temperature dependency of parameters has been developed to second order. In Section 2.4, temperature dependency of parameters has been developed to third order, and then thermal pressure coefficient is calculated by data in each state for lithium fluid . In Section 3, it has been shown that a gradual transition from metallic lithium to non-metallic lithium occurs when density decreases [17–21]. While the transition is occurring, a number of changes in the liquid structure happen, since the repulsion term of lithium potential energy versus temperature contains anomalous behavior, and it shows a well depth that the position of well depth maximum is the metal-nonmetal transition region of lithium. In the present paper, we also show that the repulsion branch of the effective pair potential has been used to predict this transition.
A general equation of state which has been recently used for pure dense fluids, according to which is linear with respect to , each isotherm as where is the compression factor, is the molar density, and and are the temperature-dependent parameters [26, 27]. A typical isotherm (1000 K) is shown in Figure 1, where it has been accepted that the lowest density conservatives the linear relation is equal to the Boyle density. All the liquid isotherms are found to be quite linear over almost the entire density range from the vaporization line to the freezing line. For convenience only, the molar densities and volumes have been reduced by the critical value mol·L−1. In order to find the temperature range over which the linearity holds when , we have plotted against for lithium at different temperatures. The results are summarized in Table 1, including the intercept and slope of the fitted straight line, the pressure range of the data, and the average absolute percent deviation of the calculated and predicted densities for a given pressure. Because both and are subject to experimental error, we also show the coefficient of determination , which is simply the square of the correlation coefficient. Here, should be within 0.005 of unity for a straight line to be considered a good fit. In such condition we, use the linear isotherm regularity and obtain the external pressure as:
2.1. Limitation of Analytical Equation of State by First-Order Temperature Dependency of Parameters
We first calculate pressure by equation of state of the linear isotherm regularity and then use first-order temperature dependency of parameters to get the thermal pressure coefficient for the dense fluid, where Here, and are related to the intermolecular attractive and repulsive forces, respectively, while is related to the nonideal thermal pressure, and has its usual meaning.
We first derive an expression for thermal pressure coefficient using first-order temperature dependency of parameters. The final result is According to (5), the experimental value of density and value of can be used to calculate the value of thermal pressure coefficient. Figure 2 shows the experimental values of the thermal pressure coefficient versus density for Li fluid compared with the thermal pressure coefficient using the at 600 K. The thermal pressure coefficient using the model yields inaccurate results for the liquid phase. Whereas, we predict that deviation concern to be inaccurate values of . For this purpose we plot versus that its intercept shows value of . Figures 3(a) and 3(b) show plots of and versus inverse temperature for lithium, respectively. It is clear that and versus inverse temperature are not first-order .
2.2. Experimental Basis of the New Equation of State
The development of equations of state for calculating the thermodynamic properties of fluids has progressed over the years from simple cubic and virial equations of state to Beattie-Bridgeman and Benedict-Webb-Rubin (BWR) equations, then to the modified BWR (mBWR) and to the fundamental equation of state explicit in the Helmholtz energy. Although the mBWR form can be converted to the Helmholtz energy form, the latter has advantages in terms of accuracy and simplicity. Most modern wide-range, high-accuracy equations of state for pure fluid properties are fundamental equations explicit in the Helmholtz energy as a function of density and temperature. All single-phase thermodynamic properties can be calculated as derivatives of the Helmholtz energy [9–15].
In this paper, we present a simple method of the ideas and the use the thermal pressure coefficient directly in place of using an equation of state to analyze experimental data. The equation of state described in this paper is explicit in Helmholtz energy with the two independent variables density and . The dimensionless Helmholtz energy is commonly split into a part depending on the ideal gas behavior and a part which takes into account the residual fluid behavior , namely:
At a given temperature, the pressure can be determined by the Helmholtz energy  Using the general expression of the relation to the reduced Helmholtz energy and its derivatives then gives where is the reduced pressure, is the reduced density, and is the inverse reduced temperature. Both the density and the temperature are reduced with their critical values and , respectively. Since the Helmholtz energy as a function of density and temperature is one of the four fundamental forms of an equation of state, all the thermodynamic properties of a pure substance can be obtained by combining derivatives of the reduced Helmholtz energy . Here, and are defined as that finally, to derive the thermal pressure coefficient, we need only convert the to : The previous procedure leads to the equation of the thermal pressure coefficient from the reduced Helmholtz energy for real fluids:
2.3. Second-Order Temperature Dependency of Parameters
In order to solve this problem, the linear isotherm regularity equation of state in the form of truncated temperature series of and parameters has been developed to second order, and then we obtain thermal pressure coefficient . Figures 4(a) and 4(b) show plots of and parameters versus inverse temperature for lithium metal fluid. It is clear that and versus inverse temperature are near to second-order equation. Thus, we obtain extending parameters and resulted in second-order equation, as The starting point in the derivation is (2) again. By substitution of (12) in (2), we obtain the pressure for lithium metal fluid: First, second, and third temperature coefficients and their temperature derivatives were calculated from this model, and the final result is for thermal pressure coefficient to form As (14) shows, it is possible to calculate thermal pressure coefficient at each density and temperature by knowing , and . For this purpose, we have plotted extending parameters of and versus that intercept, and coefficients show the values of , and . For comparison, Figure 5 shows the experimental values of thermal pressure coefficient versus density for lithium metal fluid that are compared with thermal pressure coefficient using the and at 600 K.
2.4. Third-Order Temperature Dependency of Parameters
In another step, we test to form truncated temperature series of and parameters to third order. Figures 6(a) and 6(b) show plots of and parameters versus inverse temperature for lithium metal fluid. It is clear that and versus inverse temperature are third order The starting point in the derivation is (2) again. By substitution of (15) in (2), we obtain the pressure for lithium metal fluid: The final result is for thermal pressure coefficient to form Based on (17), to obtain thermal pressure coefficient, it is necessary to determine values , and . For this purpose, we have plotted extending parameters of and versus that intercept, and coefficients show the values of , and . In contrast, Figures 7 and 8 show the experimental values of thermal pressure coefficient versus density for liquid lithium that are compared with thermal pressure coefficient using the , , and at 600 and 1600 K, respectively.
3. Prediction of Metal-Nonmetal Transition
Lithium has the highest critical temperature of any fluid alkali metals. Therefore, it has been investigated experimentally with accurate measurements in the liquid region. These measurements involve its magnetic, electrical, structural, optical, and thermophysical properties with optimal control of temperature in the critical region. The fundamental difficulty in dealing with fluid metals is that the electronic structures of liquid and gas phases are completely different [17–21]. The electronic structure of lithium (and other molten metals) at low temperatures can be well approximated by the structure of the free electron gas, and thus the thermodynamic properties of metals can be obtained by the same cohesion mechanism of the free electron gas. Experimental data clearly represent that lithium near 1600 K (at densities larger than 58 mol·L−1) follows the nearly free electron theory of metals that considers the nuclei completely shielded by delocalized electrons, and it is in agreement with X-ray diffraction and small-angle X-ray scattering. At lower densities (58 mol·L−1), the cohesion mechanism of its atoms will be suppressed by a partial localization of electrons, and the metallic character is changed to a nonmetal kind and a gradual metal-nonmetal transition (M-NMT) occurs. Analytical equations of state are presented for fluid lithium in metal, nonmetal, and in metal-nonmetal transition states (Table 1). Equations of state for metal and nonmetal states are simple in form but the complexities of the transition state lead to a complex equation. The interatomic potential function used to describe the metal state has a soft repulsion wall, and that of the nonmetal state is the same as the potential function of the nonpolar fluid with induced dipole intermolecular interaction. Metal-nonmetal transition occurs in the liquid density range lower than 58 mol·L−1, and a temperature-dependent interaction potential function, which gradually changes from a pure metal interaction to a nonmetal interaction in the transition region. In accordance with Figure 9, the repulsion term of the linear isotherm regularity equation of state for lithium versus temperature presents well depth that the position of well depth maximum is a temperature-dependent quantity. In the transition region, position of well depth maximum represents that lithium near 1600 K and at densities larger than 58 mol·L−1 has a singularity characteristic of phase transition. In accordance with Figure 10, we have shown that the attractive term of the isotherms of against for lithium at different temperatures is not very sensitive to temperature functionality for isotherms at 600–2000 K. In accordance with these observations, we can say which repulsion term of the potential energy of the lithium metal plays the fundamental role in metal-nonmetal transition.
4. Results and Discussion
Lithium is a trace element in the human body . Think of Lithium-ion batteries, and the first things likely to come to mind are cell phones, laptop computers, and other portable electronic gadgets. No doubt about it, the low weight, small size, and large energy capacity of lithium-ion batteries relative to other battery types have helped these high-tech power packs corner the market in the portable electronics arena. These days, the batteries are being used to energize powerful electric drive systems in automobiles and motorcycles. They are also being tapped for medical and backup power services and other applications that demand a big jolt of power .
One of the most difficult problems within the context of the thermodynamics lies in the shortage for experimental data for some basic quantities such as thermal pressure coefficients which are tabulated for extremely narrow temperature ranges, normally around the ambient temperature for several types of liquids. Furthermore, the measurements of the thermal pressure coefficients made by different researchers often reveal systematic differences between their estimates. Liquids and dense fluids are usually considered to be complicated on a molecular scale, and a satisfactory theory of liquids only began to emerge in the 1960s. However, they show a number of experimental regularities, some of which have been known by theoretical basis.
A work has led to try to establish a correlation function for the accurate calculation of the thermal pressure coefficients for different fluids over wide temperature and pressure ranges. The most straightforward way to derive the thermal pressure coefficient is the calculation of thermal pressure coefficient with the use of the principle of corresponding states which covers wide temperature and pressure ranges. The principle of corresponding states calls for the reduced thermal pressure at a given reduced temperature and density to be the same for all fluids. This is true, since the corresponding-states approach is appropriate for conditions of low density in which the fluid molecules are far apart and thus have little interaction. Moreover, at low density, the gas behaves ideally and its thermal pressure coefficient is temperature independent and approaches in the zero-density limit. However, as density increases, molecular interactions become increasingly important, and the principle of corresponding states fails. The leading term of this correlation function is the thermal pressure coefficient of perfect gas, in which each gas obeys the low density range. Using this condition can predict the thermal pressure coefficient of different supercritical fluids and refrigerants up to densities . It is found out “empirically” that at high densities, it is possible to apply the principle of corresponding states to different fluids according to the magnitude of their critical densities versus mol [29, 30].
A general regularity was recently reported for dense fluids, both compressed liquids () and dense supercritical fluids (). The regularity is that is linear in . The regularity was tested for 13 fluids, including nonpolar, polar, hydrogen-bonded, and quantum fluids, and found to be valid for all of them . Experimentally, the regularity holds for liquid isotherms from the vaporization line to the freezing line and for supercritical isotherms for densities greater than the Boyle density and for temperatures less than twice the Boyle temperature. The Boyle temperature, , and Boyle density, , are defined in terms of the second virial coefficient, and , where . The purpose of this paper is to examine whether the regularity extends to lithium fluid in metal, nonmetal, and in metal-nonmetal transition states. The reason for expecting it to hold for mixtures is the success of one-fluid approximations for mixtures, in which mixtures follow the same equation of state as single substances, but with parameters that depend on the mixture composition. In this paper, we derive an expression for a thermal pressure coefficient of lithium metal by extending the linear isotherm regularity . Unlike previous models, it has been shown in this paper that, thermal pressure coefficient can be obtained without employing any reduced Helmholtz energy. Only, experimental data have been used for the calculation of thermal pressure coefficient of lithium metal. Comparison of the calculated values of thermal pressure coefficient using the linear isotherm regularity with the values obtained experimentally shows the validity of the use of the linear isotherm regularity for studying thermal pressure coefficient of lithium metal. In this paper, it has been shown that the temperature dependences of the intercept and slope of using linear isotherm regularity for lithium metal are nonlinear. This problem has led us to try to obtain the expression for the thermal pressure coefficient of lithium metal using the extending of the intercept and slope of the linearity parameters versus inversion of temperature to third order. The thermal pressure coefficients predicted from this simple model are in good agreement with experimental data. The results show that the accuracy of this method is generally quite good. The resulting model predicts accurately the thermal pressure coefficients from the lower density limit at the Boyle density at the triple temperature up to about double the Boyle temperature. These problems have led us to try to establish a function for the accurate calculation of thermal pressure coefficients of the lithium fluid based on linear isotherm regularity equation of state theory. In contrast, Figures 8 and 9 show the experimental values of thermal pressure coefficient versus density for liquid lithium that are compared with thermal pressure coefficient using the , , and at 600 and 1600 K, respectively. Although all three models capture the qualitative features for lithium of liquid, only the calculated values of thermal pressure coefficient using the model produce quantitative agreement. Tables 2 and 3 present a more test of these models. Although the model yields good results for lithium of liquid, the model is able to accurately predict the thermal pressure coefficient of the liquid.
In this paper, we have also shown that a gradual transition from metallic lithium to nonmetallic lithium occurs when density decreases. This transition occurs in the liquid density range 58 mol·L−1). An infinite system of electrons in ground state, subject to a very slowly varying external pressure, has slowly varying properties and can be described by a gradient expansion theory. However, when, there is a spatially rapidly varying with density, or there are regions in which the electron density drops to zero (e.g., electrons in covalence form), the density and other properties of the system exhibit additional spatial variations, which it is called metal-nonmetal transition. This paper deals with some general features of systems of electrons in their ground state. Our starting point is an infinite electron gas, subject to a sufficiently slowly varying external pressure, . It is well known that the structure of a dense fluid is essentially a molecular scale problem. In fact, the repulsive forces have an important role in the determination of the fluid structure, and the cohesive or attractive interactions in a fluid only define the fluid volume. The precise meaning of the metal-nonmetal transition is contained in a generalized manner in the following well-known thermodynamic equations. In conclusion, we have showed that the metal-nonmetal transition of liquid lithium metal can be explained by the repulsion term of the linear isotherm regularity equation of state, where and are the linear isotherm regularity parameters that correspond to the attraction and repulsion components of the Lennard-Jones (12–6) potential function. Analytical equations of state are presented for fluid lithium in metal, nonmetal, and in metal-nonmetal transition states. Equations of state for metal and nonmetal states are simple in form but the complexities of the transition state lead to a complex equation for repulsion term of potential energy. Thus, repulsion term for lithium versus temperature shows well depth in agreement with X-ray diffraction and small-angle X-ray scattering that the position of well depth maximum is a temperature-dependent quantity, and it also shows the metal-nonmetal transition residential [17–21].
The authors thank the Payame Noor University for financial support.
- C. Monnin and M. Dubois, “Thermodynamics of the LiOH + H2O system,” Journal of Chemical and Engineering Data, vol. 50, no. 4, pp. 1109–1113, 2005.
- F. Roehlich, F. Tepper, and R. L. Rankin, “Surface tension of four alkali metals to 1000 °C,” Journal of Chemical and Engineering Data, vol. 13, no. 4, pp. 518–521, 1968.
- W. D. Weatherford Jr., R. K. Johnston, and M. L. Valtierra, “Kinematic viscosity of liquid rubidium from 67 ° to 688 °C,” Journal of Chemical and Engineering Data, vol. 9, no. 4, pp. 520–524, 1964.
- N. Rai, J. I. Siepmann, N. E. Schultz, and R. B. Ross, “Pressure dependence of the hildebrand solubility parameter and the internal pressure: Monte Carlo simulations for external pressures up to 300 MPa,” Journal of Physical Chemistry C, vol. 111, no. 43, pp. 15634–15641, 2007.
- O. Fandiño, M. J. P. Comuñas, L. Lugo, E. R. López, and J. Fernández, “Density measurements under pressure for mixtures of pentaerythritol ester lubricants. Analysis of a density-viscosity relationship,” Journal of Chemical and Engineering Data, vol. 52, no. 4, pp. 1429–1436, 2007.
- N. Rai and E. J. Maginn, “Critical behaviour and vapour-liquid coexistence of 1-alkyl-3- methylimidazolium bis(trifluoromethylsulfonyl)amide ionic liquids via Monte Carlo simulations,” Faraday Discussions, vol. 154, pp. 53–69, 2012.
- V. Moeini, “New regularity for internal pressure of dense fluids,” Journal of Physical Chemistry B, vol. 110, no. 7, pp. 3271–3275, 2006.
- V. Moeini and M. Deilam, “Determination of molecular diameter by PVT,” ISRN Physical Chemistry, vol. 2012, Article ID 521827, 5 pages, 2012.
- R. B. Stewart and T. Jacobsen, “Thermodynamic properties of Ar from the triple point to 1200 K with pressure to 1000 MPa,” Journal of Physical and Chemical Reference Data, vol. 18, no. 2, pp. 639–798, 1989.
- R. D. Goodwin, “Carbon monoxide thermophysical properties from 68 to 1000 K at pressures to 100 MPa,” Journal of Physical and Chemical Reference Data, vol. 14, no. 4, pp. 849–933, 1985.
- R. Span and W. Wagner, “A new equation of state for carbon dioxide covering the fluid region from the triple-point temperature to 1100 K at pressures up to 800 MPa,” Journal of Physical and Chemical Reference Data, vol. 25, no. 6, pp. 1509–1596, 1996.
- R. T. Jacobsen, R. B. Stewart M, and Jahangiri, “Thermodynamic Properties of Nitrogen from the Freezing Line to 2000 K at Pressures to 1000 MPa,” Journal of Physical and Chemical Reference Data, vol. 15, no. 2, pp. 735–910, 1986.
- B. A. Younglove and J. F. Ely, “Thermophysical properties of fluids. II. Methane, ethane, propane, isobutane, and normal butane,” Journal of Physical and Chemical Reference Data, vol. 16, no. 4, pp. 577–799, 1987.
- R. D. Goodwin, “Benzene thermophysical properties from 279 to 900 K at pressures to 1000 Bar,” Journal of Physical and Chemical Reference Data, vol. 17, no. 4, pp. 1541–1637, 1988.
- R. D. Goodwin, “Toluene thermophysical properties from 178 to 800 K at pressures to 1000 Bar,” Journal of Physical and Chemical Reference Data, vol. 18, no. 4, pp. 1565–1637, 1989.
- V. Moeini, F. Ashrafi, M. Karri, and H. Rahimi, “Calculation of thermal pressure coefficient of dense fluids using the linear isotherm regularity,” Journal of Physics Condensed Matter, vol. 20, no. 7, Article ID 075102, 2008.
- V. Moeini, “Internal pressures of lithium and cesium fluids at different emperatures,” Journal of Chemical and Engineering Data, vol. 55, no. 3, pp. 1093–1099, 2010.
- K. Mutsuda, K. Tamura, and M. Inui, “Instability of the electron gas in an expanding metal,” Physical Review Letters, vol. 98, no. 9, Article ID 096401, 4 pages, 2007.
- K. Matsuda, S. Naruse, K. Hayashi, K. Tamura, M. Inui, and Y. Kajihara, “Structural study of expanded fluid cesium,” Journal of Physics: Conference Series, vol. 98, no. 1, Article ID 012003, 2008.
- K. Tamura, K. Matsuda, and M. Inui, “Structural and electronic properties of expanding fluid metals,” Journal of Physics Condensed Matter, vol. 20, no. 11, Article ID 114102, 2008.
- V. Moeini, “Internal pressures of sodium, potassium, and rubidium fluids at different temperatures,” Journal of Chemical and Engineering Data, vol. 55, no. 12, pp. 5673–5680, 2010.
- G. A. Few and M. Rigby, “Thermal pressure coefficient and internal pressure of 2,2-dimethylpropane,” Journal of Physical Chemistry, vol. 79, no. 15, pp. 1543–1546, 1975.
- G. R. Driver and A. G. Williamson, “Thermal pressure coefficients of di-n-alkyl ethers,” Journal of Chemical and Engineering Data, vol. 17, no. 1, pp. 65–66, 1972.
- G. C. Fortune and G. N. Malcolm, “The thermal pressure coefficient and the entropy of melting at constant volume of isotactic polypropylene,” Journal of Physical Chemistry, vol. 71, no. 4, pp. 876–879, 1967.
- G. Parsafar and E. A. Mason, “Linear isotherms for dense fluids: a new regularity,” Journal of Physical Chemistry, vol. 97, no. 35, pp. 9048–9053, 1993.
- G. A. Parsafar, V. Moeini, and B. Najafi, “Pressure dependence of liquid vapor pressure: an improved Gibbs prediction,” Iranian Journal of Chemistry and Chemical Engineering, vol. 20, no. 1, pp. 37–43, 2001.
- P. V. R. Schleyer, “Lithium,” Chemical and Engineering News, vol. 81, no. 36, p. 36, 2003.
- M. Jacoby, “Lithium batteries with more muscle,” Chemical and Engineering News, vol. 84, no. 24, pp. 36–38, 2006.
- J. O. Hirschfelder, C. F. Curtiss, and R. B. Bird, Molecular Theory of Gases and Liquids, John Wiley & Sons, New York, NY, USA, 2nd edition, 1964.
- Y. Ghayeb, B. Najafi, V. Moeini, and G. Parsafar, “Calculation of the viscosity of supercritical fluids based on the modified Enskog theory,” High Temperatures—High Pressures, vol. 35-36, no. 2, pp. 217–226, 2003/2004.