About this Journal Submit a Manuscript Table of Contents
ISRN Tribology
Volume 2013 (2013), Article ID 254705, 6 pages
http://dx.doi.org/10.5402/2013/254705
Research Article

Contribution to the Modelling of the Tribological Surface Transformations

1Laboratoire de Mécanique et d'Acoustique, UPR CNRS 7051, 31 Chemin Joseph-Aiguier, 13402 Marseille Cedex 20, France
2Université de Provence, 3 Place Victor Hugo, 13331 Marseille Cedex 03, France

Received 24 April 2012; Accepted 23 May 2012

Academic Editors: F. Nair, Z. Wen, and H. Xing

Copyright © 2013 G. Antoni. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. Colombié, Usure induite sous petits débattements-Identification des phénomènes [Thèse de doctorat], INSA Lyon, France, 1986.
  2. P. Blanchard, Usure induite en petits débattements: transformation tribologique superficielle d'alliages de titane [Thèse de doctorat], INSA Lyon, France, 1991.
  3. E. Sauger, Contribution à l'étude de la transformation tribologique superficielle en fretting [Thèse de doctorat], INSA Lyon, France, 1997.
  4. A. C. Sekkal, Etude des transformations tribologiques de surfaces ou TTS induites par impacts à énergie controlée [thèse de doctorat], INSA Lyon, France, 2000.
  5. W. Österle, H. Rooch, A. Pyzalla, and L. Wang, “Investigation of white etching layers on rails by optical microscopy, electron microscopy, X-ray and synchroton X-ray diffraction,” Materials Science and Engineering A, vol. 303, no. 1-2, pp. 150–157, 2001. View at Publisher · View at Google Scholar · View at Scopus
  6. W. Lojkowski, M. Djahanbakhsh, G. Bürkle, S. Gierlotka, W. Zielinski, and H. J. Fecht, “Nanostructure formation on the surface of railway tracks,” Materials Science and Engineering A, vol. 303, no. 1-2, pp. 197–208, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Pyzalla, L. Wang, E. Wild, and T. Wroblewski, “Changes in microstructure, texture and residual stresses on the surface of a rail resulting from friction and wear,” Wear, vol. 251, no. 2, pp. 901–907, 2001. View at Scopus
  8. E. Wild, L. Wang, B. Hasse, T. Wroblewski, G. Goerigk, and A. Pyzalla, “Microstructure alterations at the surface of a heavily corrugated rail with strong ripple formation,” Wear, vol. 254, no. 9, pp. 876–883, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Hiensch, J. C. O. Nielsen, and E. Verheijen, “Rail corrugation in the Netherlands—measurements and simulations,” Wear, vol. 253, no. 1-2, pp. 140–149, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. J. F. Archard and R. A. Rowntree, “The temperature of rubbing bodies; the distribution of temperatures,” Wear, vol. 128, pp. 1–17, 1988.
  11. J. Ahlström and B. Karlsson, “Microstructural evaluation and interpretation of the mechanically and thermally affected zone under railway wheel flats,” Wear, vol. 232, no. 1, pp. 1–14, 1999. View at Publisher · View at Google Scholar · View at Scopus
  12. G. Baumann, H. J. Fecht, and S. Liebelt, “Formation of white-etching layers on rail treads,” Wear, vol. 191, no. 1-2, pp. 133–140, 1996. View at Scopus
  13. Y. Jirásková, J. Svoboda, O. Schneeweiss, W. Daves, and F. D. Fischer, “Microscopic investigation of surface layers on rails,” Applied Surface Science, vol. 239, no. 2, pp. 132–141, 2005. View at Publisher · View at Google Scholar · View at Scopus
  14. G. W. Greenwood and R. H. Johnson, “The deformation of metals under small stresses during phase transformations,” in Proceedings of the Royal Society of London, vol. 293 of Mathematical and Physique Sciences, pp. 403–422, 1965.
  15. J. B. Leblond, J. Devaux, and J. C. Devaux, “Mathematical modelling of transformation plasticity in steels I: case of ideal-plastic phases,” International Journal of Plasticity, vol. 5, no. 6, pp. 551–572, 1989. View at Scopus
  16. J. B. Leblond, “Mathematical modelling of transformation plasticity in steels II: coupling with strain hardening phenomena,” International Journal of Plasticity, vol. 5, no. 6, pp. 573–591, 1989. View at Scopus
  17. J.-C. Videau, G. Cailletaud, and A. Pineau, “Modélisation des effets mécaniques des transformations de phases pour le calcul de structures,” Journal de Physique IV, vol. 4, no. 3, pp. 227–232, 1994.
  18. J.-C. Videau, G. Cailletaud, and A. Pineau, “Experimental study of the transformation-induced plasticity in a Cr-Ni-Mo-Al-Ti steel,” Journal De Physique. IV, vol. 6, no. 1, pp. 465–474, 1996. View at Scopus
  19. F. D. Fischer, G. Reisner, E. Werner, K. Tanaka, G. Cailletaud, and T. Antretter, “New view on transformation induced plasticity (TRIP),” International Journal of Plasticity, vol. 16, no. 7, pp. 723–748, 2000. View at Publisher · View at Google Scholar · View at Scopus
  20. L. Taleb and F. Sidoroff, “A micromechanical modeling of the Greenwood-Johnson mechanism in transformation induced plasticity,” International Journal of Plasticity, vol. 19, no. 10, pp. 1821–1842, 2003. View at Publisher · View at Google Scholar · View at Scopus
  21. L. Taleb and S. Petit, “New investigations on transformation induced plasticity and its interaction with classical plasticity,” International Journal of Plasticity, vol. 22, no. 1, pp. 110–130, 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. G. Antoni, T. Désoyer, and F. Lebon, “Tribological transformations of surface: a thermo-mechanical modelling,” in Proceedings of the 10th International Conference on Computational Structures Technology, p. 14, 2010, (CD-ROM).
  23. G. Antoni, Transformation tribologique de surface: une approche thermo-mécanique [Thèse de doctorat], Université de Provence, France, 2010.
  24. J. Garrigues, Fondements de la Mécanique des milieux continus, Hermés Science Publications, France, 2007.
  25. J. Lemaitre and J. L. Chaboche, Mécanique des Matériaux Solides, Dunod, France, 1996.
  26. Q. S. Nguyen, “On the elastic-plastic initial-boundary value problem and its numerical integration,” International Journal for Numerical Methods in Engineering, vol. 11, no. 5, pp. 817–832, 1977. View at Scopus
  27. J. C. Simo and R. L. Taylor, “Consistent tangent operators for rate-independent elastoplasticity,” Computer Methods in Applied Mechanics and Engineering, vol. 48, no. 1, pp. 101–118, 1985. View at Scopus