- About this Journal ·
- Abstracting and Indexing ·
- Aims and Scope ·
- Article Processing Charges ·
- Articles in Press ·
- Author Guidelines ·
- Bibliographic Information ·
- Citations to this Journal ·
- Contact Information ·
- Editorial Board ·
- Editorial Workflow ·
- Free eTOC Alerts ·
- Publication Ethics ·
- Reviewers Acknowledgment ·
- Submit a Manuscript ·
- Subscription Information ·
- Table of Contents
Volume 2013 (2013), Article ID 367872, 9 pages
An Immunosensor for Pathogenic Staphylococcus aureus Based on Antibody Modified Aminophenyl-Au Electrode
1Institute of Analytical Sciences, University of Lyon, UMR CNRS 5280, 5 rue de la Doua, 69100 Villeurbanne, France
2Laboratory of Interfaces and Advanced Materials, Faculty of Sciences, University of Monastir, Avenue de l’Environnement, 5019 Monastir, Tunisia
3Laboratory of Analysis, Treatment and Valorisation of Pollutants of Environment and of Products, Faculty of Pharmacy, University of Monastir, 5019 Monastir, Tunisia
Received 8 August 2013; Accepted 9 September 2013
Academic Editors: S. Arya and E. M. Richter
Copyright © 2013 Amani Chrouda et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
- B. Kouidhi, T. Zmantar, H. Hentati, and A. Bakhrouf, “Cell surface hydrophobicity, biofilm formation, adhesives properties and molecular detection of adhesins genes in Staphylococcus aureus associated to dental caries,” Microbial Pathogenesis, vol. 49, no. 1-2, pp. 14–22, 2010.
- R. Ananthanarayan and C. K. J. Panikaran, “Diagnostic value of mannitol for sugar fermentation in S. aureus,” in Textbook of Microbiology, S. Kumar, Ed., vol. 6, pp. 178–186, 2001.
- I. Hein, A. Lehner, P. Rieck, K. Klein, E. Brandl, and M. Wagner, “Comparison of different approaches to quantify Staphylococcus aureus cells by real-time quantitative PCR and application of this technique for examination of cheese,” Applied and Environmental Microbiology, vol. 67, no. 7, pp. 3122–3126, 2001.
- R. W. Bennett, “Staphylococcal enterotoxin and its rapid identification in foods by enzyme-linked immunosorbent assay-based methodology,” Journal of Food Protection, vol. 68, no. 6, pp. 1264–1270, 2005.
- E. Leoni, G. D. Luca, P. P. Legnani, R. Sacchetti, S. Stampi, and F. Zanetti, “Legionella waterline colonization: detection of Legionella species in domestic, hotel and hospital hot water systems,” Journal of Applied Microbiology, vol. 98, no. 2, pp. 373–379, 2005.
- M. Nayak, A. Kotian, S. Marathe, and D. Chakravortty, “Detection of microorganisms using biosensors-A smarter way towards detection techniques,” Biosensors and Bioelectronics, vol. 25, no. 4, pp. 661–667, 2009.
- E. Tully, S. P. Higson, and R. O'Kennedy, “The development of a “labeless” immunosensor for the detection of Listeria monocytogenes cell surface protein, Internalin B,” Biosensors and Bioelectronics, vol. 23, no. 6, pp. 906–912, 2008.
- D. Li, Y. Feng, L. Zhou et al., “Label-free capacitive immunosensor based on quartz crystal Au electrode for rapid and sensitive detection of Escherichia coli O157:H7,” Analytica Chimica Acta, vol. 687, no. 1, pp. 89–96, 2011.
- A. Subramanian, J. Irudayaraj, and T. Ryan, “A mixed self-assembled monolayer-based surface plasmon immunosensor for detection of E. coli O157:H7,” Biosensors and Bioelectronics, vol. 21, no. 7, pp. 998–1006, 2006.
- O. Laczka, E. Baldrich, F. X. Muñoz, and F. J. Del Campo, “Detection of Escherichia coli and Salmonella typhimurium using interdigitated microelectrode capacitive immunosensors: the importance of transducer geometry,” Analytical Chemistry, vol. 80, no. 19, pp. 7239–7247, 2008.
- F. Salam and I. E. Tothill, “Detection of Salmonella typhimurium using an electrochemical immunosensor,” Biosensors and Bioelectronics, vol. 24, no. 8, pp. 2630–2636, 2009.
- V. Escamilla-Gómez, S. Campuzano, M. Pedrero, and J. M. Pingarrón, “Electrochemical immunosensor designs for the determination of Staphylococcus aureus using 3,3-dithiodipropionic acid di(N-succinimidyl ester)-modified gold electrodes,” Talanta, vol. 77, no. 2, pp. 876–881, 2008.
- F. Tan, P. H. M. Leung, Z.-B. Liu et al., “A PDMS microfluidic impedance immunosensor for E. coli O157:H7 and Staphylococcus aureus detection via antibody-immobilized nanoporous membrane,” Sensors and Actuators B, vol. 159, no. 1, pp. 328–335, 2011.
- M. Braiek, K. Bekir Rokbani, A. Chrouda et al., “An electrochemical immunosensor for detection of Staphylococcus aureus bacteria based on immobilization of antibodies on self-assembled monolayers-functionalized gold electrode,” Biosensors, vol. 2, no. 4, pp. 417–426, 2012.
- M. Delamar, R. Hitmi, J. Pinson, and J. M. Savéant, “Covalent modification of carbon surfaces by grafting of functionalized aryl radicals produced from electrochemical reduction of diazonium salts,” Journal of the American Chemical Society, vol. 114, no. 14, pp. 5883–5884, 1992.
- C. Saby, B. Ortiz, G. Y. Champagne, and D. Bélanger, “Electrochemical modification of glassy carbon electrode using aromatic diazonium salts, blocking effect of 4-nitrophenyl and 4-carboxyphenyl groups,” Langmuir, vol. 13, no. 25, pp. 6805–6813, 1997.
- J. Lyskawa and D. Bélanger, “Direct modification of a gold electrode with aminophenyl groups by electrochemical reduction of in situ generated aminophenyl monodiazonium cations,” Chemistry of Materials, vol. 18, no. 20, pp. 4755–4763, 2006.
- G. Z. Liu, T. Böcking, and J. J. Gooding, “Diazonium salts: stable monolayers on gold electrodes for sensing applications,” Journal of Electroanalytical Chemistry, vol. 600, no. 2, pp. 335–344, 2007.
- A. Adenier, M.-C. Bernard, M. M. Chehimi et al., “Covalent modification of iron surfaces by electrochemical reduction of aryldiazonium salts,” Journal of the American Chemical Society, vol. 123, no. 19, pp. 4541–4549, 2001.
- A. Chaussé, M. M. Chehimi, N. Karsi, J. Pinson, F. Podvorica, and C. Vautrin-Ul, “The electrochemical reduction of diazonium salts on iron electrodes. The formation of covalently bonded organic layers and their effect on corrosion,” Chemistry of Materials, vol. 14, no. 1, pp. 392–400, 2002.
- J. J. Gooding, “Advances in interfacial design for electrochemical biosensors and sensors: aryl diazonium salts for modifying carbon and metal electrodes,” Electroanalysis, vol. 20, no. 6, pp. 573–582, 2008.
- R. Polsky, J. C. Harper, D. R. Wheeler, and S. M. Brozik, “Multifunctional electrode arrays: towards a universal detection platform,” Electroanalysis, vol. 20, no. 6, pp. 671–679, 2008.
- A. Hayat, L. Barthelmebs, A. Sassolas, and J.-L. Marty, “An electrochemical immunosensor based on covalent immobilization of okadaic acid onto screen printed carbon electrode via diazotization-coupling reaction,” Talanta, vol. 85, no. 1, pp. 513–518, 2011.
- C. M. A. Brett, S. Kresak, T. Hianik, and A. M. O. Brett, “Studies on self-assembled alkanethiol monolayers formed at applied potential on polyerystalline gold electrodes,” Electroanalysis, vol. 15, no. 5-6, pp. 557–565, 2003.
- P. Allongue, M. Delamar, B. Desbat et al., “Covalent modification of carbon surfaces by aryl radicals generated from the electrochemical reduction of diazonium salts,” Journal of the American Chemical Society, vol. 119, no. 1, pp. 201–207, 1997.
- G. Liu, E. Luais, and J. J. Gooding, “The fabrication of stable gold nanoparticle-modified interfaces for electrochemistry,” Langmuir, vol. 27, no. 7, pp. 4176–4183, 2011.
- B. P. Corgier, A. Laurent, P. Perriat, L. J. Blum, and C. A. Marquette, “A versatile method for direct and covalent immobilization of DNA and proteins on biochips,” Angewandte Chemie International Edition, vol. 46, no. 22, pp. 4108–4110, 2007.
- A.-E. Radi, X. Muñoz-Berbel, M. Cortina-Puig, and J.-L. Marty, “A third-generation hydrogen peroxide biosensor based on horseradish peroxidase covalently immobilized on electrografted organic film on screen-printed carbon electrode,” Electroanalysis, vol. 21, no. 14, pp. 1624–1629, 2009.
- J. L. Bahr and J. M. Tour, “Highly functionalized carbon nanotubes using in situ generated diazonium compounds,” Chemistry of Materials, vol. 13, no. 11, pp. 3823–3824, 2001.
- O. A. de Fuentes, T. Ferri, M. Frasconi, V. Paolini, and R. Santucci, “Highly-ordered covalent anchoring of carbon nanotubes on electrode surfaces by diazonium salt reactions,” Angewandte Chemie, vol. 50, no. 15, pp. 3457–3461, 2011.
- B. Chen, A. K. Flatt, H. Jian, J. L. Hudson, and J. M. Tour, “Molecular grafting to silicon surfaces in air using organic triazenes as stable diazonium sources and HF as a constant hydride-passivation source,” Chemistry of Materials, vol. 17, no. 19, pp. 4832–4836, 2005.
- A. J. Downard and M. J. Prince, “A simple approach to patterned protein immobilization on silicon via electrografting from diazonium salt solutions,” Langmuir, vol. 17, pp. 5581–5586, 2001.
- A.-E. Radi, X. Muñoz-Berbel, V. Lates, and J.-L. Marty, “Label-free impedimetric immunosensor for sensitive detection of ochratoxin A,” Biosensors and Bioelectronics, vol. 24, no. 7, pp. 1888–1892, 2009.
- S. Mahouche-Chergui, S. Gam-Derouich, C. Mangeney, and M. M. Chehimi, “Aryl diazonium salts: a new class of coupling agents for bonding polymers, biomacromolecules and nanoparticles to surfaces,” Chemical Society Reviews, vol. 40, no. 7, pp. 4143–4166, 2011.
- D. Bélanger and J. Pinson, “Electrografting: a powerful method for surface modification,” Chemical Society Reviews, vol. 40, no. 7, pp. 3995–4048, 2011.
- A. Adenier, E. Cabet-Deliry, A. Chaussé et al., “Grafting of aryl groups on carbon or metallic surfaces without electrochemical induction,” Chemistry of Materials, vol. 17, pp. 491–501, 2005.
- A. Ramanavicius, A. Finkelsteinas, H. Cesiulis, and A. Ramanaviciene, “Electrochemical impedance spectroscopy of polypyrrole based electrochemical immunosensor,” Bioelectrochemistry, vol. 79, no. 1, pp. 11–16, 2010.
- P. Geng, X. Zhang, W. Meng et al., “Self-assembled monolayers-based immunosensor for detection of Escherichia coli using electrochemical impedance spectroscopy,” Electrochimica Acta, vol. 53, no. 14, pp. 4663–4668, 2008.
- A.-E. Radi, X. Muñoz-Berbel, M. Cortina-Puig, and J.-L. Marty, “An electrochemical immunosensor for ochratoxin A based on immobilization of antibodies on diazonium-functionalized gold electrode,” Electrochimica Acta, vol. 54, no. 8, pp. 2180–2184, 2009.
- A. Mesnage, X. Lefevre, P. Jegou, G. Deniau, and S. Palacin, “Spontaneous grafting of diazonium salts: chemical mechanism on metallic surfaces,” Langmuir, vol. 28, pp. 11767–11778, 2012.
- P. A. Brooksby and A. J. Downard, “Electrochemical and atomic force microscopy study of carbon surface modification via diazonium reduction in aqueous and acetonitrile solutions,” Langmuir, vol. 20, no. 12, pp. 5038–5045, 2004.
- P. A. Brooksby and A. J. Downard, “Multilayer nitroazobenzene films covalently attached to carbon. An AFM and electrochemical study,” Journal of Physical Chemistry B, vol. 109, no. 18, pp. 8791–8798, 2005.
- M. Kullapere, M. Marandi, L. Matisen et al., “Blocking properties of gold electrodes modified with 4-nitrophenyl and 4-decylphenyl groups,” Journal of Solid State Electrochemistry, vol. 16, no. 2, pp. 569–578, 2012.
- A. L. Gui, G. Liu, M. Chockalingam et al., “A comparative study of electrochemical reduction of 4-nitrophenyl covalently grafted on gold and carbon,” Electroanalysis, vol. 22, no. 16, pp. 1824–1830, 2010.
- A. Chira, O.-I. Covaci, and G. L. Radu, “A comparative study of gold electrodes modification methods with aromatic compounds based on diazonium and thiol chemistry,” UPB Scientific Bulletin B, vol. 74, no. 1, pp. 183–192, 2012.
- J. Bisquert, G. Garcia-Belmonte, P. Bueno, E. Longo, and L. O. S. Bulhões, “Impedance of constant phase element (CPE)-blocked diffusion in film electrodes,” Journal of Electroanalytical Chemistry, vol. 452, no. 2, pp. 229–234, 1998.
- J. T. La Belle, K. Bhavsar, A. Fairchild et al., “A cytokine immunosensor for multiple sclerosis detection based upon label-free electrochemical impedance spectroscopy,” Biosensors and Bioelectronics, vol. 23, no. 3, pp. 428–431, 2007.
- L. G. Harris, S. J. Foster, R. G. Richards, P. Lambert, D. Stickler, and A. Eley, “An introduction to Staphylococcus aureus, and techniques for identifyingand quantifying S. aureus adhesins in relation to adhesion to biomaterials: review,” European Cells & Materials, vol. 4, pp. 39–60, 2002.