- About this Journal ·
- Abstracting and Indexing ·
- Advance Access ·
- Aims and Scope ·
- Article Processing Charges ·
- Articles in Press ·
- Author Guidelines ·
- Bibliographic Information ·
- Citations to this Journal ·
- Contact Information ·
- Editorial Board ·
- Editorial Workflow ·
- Free eTOC Alerts ·
- Publication Ethics ·
- Reviewers Acknowledgment ·
- Submit a Manuscript ·
- Subscription Information ·
- Table of Contents
ISRN Materials Science
Volume 2014 (2014), Article ID 489487, 5 pages
Fracture Surface Analysis in Thixojoined Tool Steels
Mining and Metallurgical Engineering Department, Amirkabir University of Technology, Tehran, Iran
Received 16 November 2013; Accepted 8 January 2014; Published 23 February 2014
Academic Editors: J. F. Bartolomé and J. Foct
Copyright © 2014 A. Kalaki et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
- B. Rajasekaran, G. Mauer, R. Vaben, A. Rottger, S. Weber, and W. Theisen, “Thick tool steel coatings using HVOF spraying for wear resistance applications,” Surface and Coatings Technology, vol. 205, no. 7, pp. 2449–2454, 2010.
- M. H. Staia, Y. Pérez-Delgado, C. Sanchez, A. Castro, E. le Bourhis, and E. S. Puchi-Cabrera, “Hardness properties and high-temperature wear behavior of nitrided AISI D2 tool steel, prior and after PAPVD coating,” Wear, vol. 267, no. 9-10, pp. 1452–1461, 2009.
- J. J. Candel, V. Amigó, J. A. Ramos, and D. Busquets, “Problems in laser repair cladding a surface AISI D2 heat-treated tool steel,” Welding International, vol. 27, no. 1, pp. 10–17, 2013.
- R. Baadjou, H. Shimahara, and G. Hirt, “Automated semi-solid forging of steel components by means of thixojoining,” Solid State Phenomena, vol. 116-117, pp. 383–386, 2006.
- H. W. Liu, C. Guo, Y. Cheng, X. F. Liu, and G. Shao, “Interfacial strength and structure of stainless steel-semi-solid aluminum alloy clad metal,” Materials Letters, vol. 60, no. 2, pp. 180–184, 2006.
- B. Amin-Ahmadi and H. Aashuri, “Semisolid structure for M2 high speed steel prepared by cooling slope,” Journal of Materials Processing Technology, vol. 210, no. 12, pp. 1632–1635, 2010.
- P. Maciol, W. Zalecki, and R. Kuziak, “Results of experimental investigations of tool steel during forming in semi-solid state,” International Journal of Material Forming, vol. 3, no. 1, supplement, pp. 756–762, 2010.
- K. P. Sołek and A. Łukaszek-Sołek, “Analysis of the heating process and development of a microstructure suitable for thixoforming of steel,” International Journal of Material Forming, vol. 1, no. 1, supplement, pp. 1015–1018, 2008.
- W. Püttgen, W. Bleck, I. Seidl, R. Kopp, and C. Bertrand, “Investigation of thixoforged damper brackets made of the steel grades HS6-5-3 and 100Cr6,” Advanced Engineering Materials, vol. 7, no. 8, pp. 726–735, 2005.
- J. Lecomte-Beckers, M. Sinnaeve, and T. J. Tchuindjang, “New trends in hot strip mill roughing mills: characterization of high chromium steel and semi-HSS grades,” in Proceedings of the Iron & Steel Technology Conference, vol. 1, pp. 1771–1782, 2011.
- A. Kalaki, Flow behavior effect of steel-steel thixojoining on mechanical properties of the joints [Ph.D. thesis], Amirkabir University of Technology, Tehran, Iran, 2013.
- A. Kalaki and M. Ketabchi, “Predicting the rheological behavior of AISI D2 semi-solid steel by plastic instability approach,” American Journal of Materials Engineering and Technology, vol. 1, no. 3, pp. 41–45, 2013.