Evaluation of Trace Metal Profile in <i>Cymbopogon validus</i> and <i>Hyparrhenia hirta</i> Used as Traditional Herbs from Environmentally Diverse Region of Komga, South Africa

Tembeni, Babalwa; Oyedeji, Opeoluwa O.; Ejidike, Ikechukwu P.; Oyedeji, Adebola O.

doi:https://doi.org/10.1155/2016/9293165

Journal of Analytical Methods in Chemistry

On this page

Abstract Introduction Materials and Methods Results and Discussion Conclusion Authors’ Contributions Acknowledgments References Copyright Related Articles

Research Article | Open Access

Volume 2016 | Article ID 9293165 | https://doi.org/10.1155/2016/9293165

Evaluation of Trace Metal Profile in Cymbopogon validus and Hyparrhenia hirta Used as Traditional Herbs from Environmentally Diverse Region of Komga, South Africa

Babalwa Tembeni,¹Opeoluwa O. Oyedeji,¹Ikechukwu P. Ejidike,¹and Adebola O. Oyedeji²

Academic Editor: Miguel de la Guardia

Received20 Apr 2016

Revised15 Jun 2016

Accepted03 Aug 2016

Published04 Oct 2016

Abstract

FAAS was used for the analysis of trace metals in fresh and dry plant parts of Cymbopogon validus and Hyparrhenia hirta species with the aim of determining the trace metals concentrations in selected traditional plants consumed in Eastern Cape, South Africa. The trace metal concentration (mg/kg) in the samples of dry Cymbopogon validus leaves (DCVL) showed Cu of ; Zn of ; Fe of ; Mn of ; Pb of mg/kg, while the samples of fresh Hyparrhenia hirta flowers (FHHF) gave Cu of ; Zn of ; Fe of ; Mn of ; Pb of mg/kg. Abundance of metal concentrations follows the order: Cu > Fe > Pb > Mn > Zn in the flower samples of Cymbopogon validus and Hyparrhenia hirta species. The concentrations of trace metals in both plant parts were below the permissible limits (PL) set by WHO. It is suggested that pharmacovigilance be carried out periodically to improve the quality, safety, and efficiency of various herbal products.

1. Introduction

Medicinal plants have played an indisputable role in the development of human race and culture, for example, religions and different ceremonies. Majority of cultures (Chinese, African, and Indian) around the world use plants directly as medicines for disease treating purposes. Medicinal plants are plants that contain substances that could be used by man because of their ability to exert a modifying benefit to the physiology of sick mammals [1] or plants that have component parts which are used as natural therapies. Virtually 80% of the populace in emerging nations depends heavily on the use of these plants/or products for primary healthcare purpose [2]. Therefore, medicinal plants are key resources in the creation of new drugs. Medicinal plants (MPs) are directly used as pharmaceuticals and/or as building blocks or starting materials for the production of semisynthetic drugs and, hence, have been playing a pivotal role in the design and development of potent therapeutic agents [3].

Medicinal plants can be used as blueprints for the production of synthetic drugs of a similar structure, for instance, the plant alkaloid Cocaine extracted from Erythroxylum coca, which has provided the chemical structure for the synthesis of Procaine and other related anaesthetics [4]. MP’s therapeutic agent discovery continues to provide novel and imperative pointers against copious pharmacological targets comprising cancer, malaria, cardiovascular diseases, and neurological disorders which are reliable source of antimicrobial compounds, thus being used as antibiotics, and because of their chemical constituents such as triterpenoids, sesquiterpenes, flavonoids, fatty acids, and alkaloids [5]. Complementary and alternative medicine has received international consideration in the last few years with an occurrence of 31.4% populace in industrialized societies, 42–69% in United States, 71% in Canada, and 90% in UK, who are consuming nutritional supplements or natural health foodstuffs (minerals, vitamins, essential fatty acids, herbal products, amino acids, traditional Chinese medicines, homeopathic medicines, and probiotics) for treatment, including eradication of ailment triggering agents, avoidance of side effects, and improving the overall quality of life [6, 7].

The species Cymbopogon validus belongs to the family Poaceae. Cymbopogon species occur in large quantities in tropics and subtropics with unlimited scattering ranging from mountains and grasslands to dry lands [8]. Its species have countless uses in pharmaceuticals, cosmetics, food and flavour, and agricultural industries. The essential oils of Cymbopogon species are in large demand worldwide due to their wide industrial uses which include raw materials for confectionery, perfumery, and pharmaceuticals [9] and these essential oils and decoction are often used as a vermifuge, emetic, antirodent, anti-infective, and antispasmodic or to treat morning sickness [8, 9]. In Eastern and Southern Africa, it is used as a thatching material [10]. The genus Hyparrhenia belongs to the family Poaceae; it is a genus of 55 grass species such as (Hyparrhenia anamesa, Hyparrhenia arrhenobasis, Hyparrhenia barteri, Hyparrhenia coleotricha, and Hyparrhenia confinis).

Many of these grass species are commonly acknowledged as thatching grasses [10]. They are mostly native to tropical Africa and the Mediterranean. These are annual and perennial bunch grasses. The grass grows in a variation of habitat types, including dry conditions, heavy, eroded soils, and rocky and disturbed areas [11]. The initial flavonolignans glycosides to be isolated as natural products from Hyparrhenia hirta using high performance liquid chromatography (HPLC) were the rare diastereoisomeric flavonolignans tricin 4′-O-(erythro-beta-guaiacylglyceryl)ether and tricin 4′-O-(threo-beta-guaiacylglyceryl)ether together with their 7-O-glucosides [11]. In vitro studies of flavonolignans have been established to have a wide variety of biological and pharmacological actions comprising antiallergic, antimicrobial (antifungal, antibacterial, and antiviral), anti-inflammatory, antioxidant, anticancer, and antidiarrhoea activities, alongside the capability to induce DNA mutation in the mixed lineage leukaemia gene [8, 9, 11].

Medicinal plants that are grown on polluted fields, near roadways or metal mining sites, possess greater chances of amassing heavy metals from the soil, water, and air. In general, the topography, the geochemical soil features, impurities in the soil, water, and air, and other development, transport, and storage conditions can significantly affect the properties and the quality of herbal plants and their formulations [12]. High levels of heavy metal contamination in the environment is increasing because of human activities such as agricultural practices, industrial processes, and natural causes such as weathering of rocks. Eventually, these heavy metals enter the plants through the soils and aerial fallouts and accumulate in these medicinal plants [13, 14]. The heavy metal contamination of herbal therapies is a present issue within traditional, complementary, and alternative medicines in numerous Asian, South American, and African herbal products [15, 16]. According to Khan et al. (2008), heavy metal concentrations differ in different plant parts and are influenced by whether a plant is grown in the wild or in cultivated environment [17].

In view of this, the study seeks to evaluate the levels of trace metals (iron, zinc, copper, manganese, and lead) present in different parts of the medicinal plants (Cymbopogon validus and Hyparrhenia hirta) collected from environmentally diverse region of Komga road near King William’s Town, Eastern Cape of South Africa, using flame atomic absorption spectrometry (FAAS). The medicinal plants are used for variety of biological and pharmacological activities amongst the populace.

2. Materials and Methods

2.1. Reagents and Chemicals

Analytical grade reagents, chemicals, and deionised water were utilized all through this research.

2.2. Plant Materials

Fresh and dry Cymbopogon validus and fresh and dry Hyparrhenia hirta (totally 8 samples) were collected from Komga road (roadside) near King William’s Town. Taxonomic identification of Cymbopogon validus and Hyparrhenia hirta was done by Dr. T. Dold and the specimens voucher was deposited in Selmar Schonland Herbarium Grahamstown (GRA) at Rhodes University. The voucher number was PR/Pl 03. The plant sample parts are leaves and flowers for both fresh and dry plants. The plants were then air-dried, ground to be in a powder form, and stored in fastened air tight bottles for further investigation. Trace metal analysis was carried out according to AOAC [18] using flame atomic absorption spectroscopy in four samples of the medicinal plants using wet digestion method [19].

2.3. Preparation of Extracts

All glassware and digestion vessels were soaked overnight in 20% nitric acid and washed with deionised water. Standard solutions of lead (Pb), manganese (Mn), iron (Fe), zinc (Zn), and copper (Cu) were obtained by dilution of 1000 mg/L stock solutions (Merck, Germany) with 5% nitric acid (HNO₃) solution. The standardization curve for each element was linear by plotting the measured absorbance and concentration (mg/kg) and a correlation coefficient was achieved. Accurately, 1.00 g of plant samples (pulverized) was weighed and placed into a digestion tube; 30 mL of 55% nitric acid (HNO₃) and 10 mL of 32% hydrochloric acid (HCl) in 3 : 1 mole ratio were added [20]. This mixture was heated for 3-4 hours until solubilisation of the sample was complete [20].

After cooling, the mineral solution was filtered through Whatman filter paper and volume was made to the mark with deionised water into a 25 mL volumetric flask. All the samples were analysed in triplicate using Flame Atomic Absorption Spectrophotometer (Thermo Fisher Scientific) Model Ice 3500 with Shimadzu, Wizard software. Optimized operating conditions for FAAS (Flame Atomic Absorption Spectrophotometer) of various heavy metals are recorded in Table 1. In order to ascertain the precision and accuracy of the analytical instrument, all necessary requirements were put in place during the analysis. Also, samples were duplicated as replication enhances the quality of the results. Blank and standard solutions were used to calibrate the instruments.

2.4. Statistical Analysis

All experiments were completed in triplicate for precision and accuracy of the results. Concentration of each metal was obtained from the calibration functions of each replicate and articulated in mg/kg on a dry/fresh-weight basis of the plant sample and results were reported as mean values ± standard deviation (mean ± SD). ANOVA was used for statistical analysis in the study ().

3. Results and Discussion

The atmosphere and soil have been continuously polluted with chemicals and heavy metals due to dynamic development of urbanization alongside widespread use of pesticides and fertilizers. In turn, these pollutants and heavy metals find their way to be deposited in the plant parts growing within the polluted areas and afterwards enter the human food chain via edible plant parts and/or extracts [21]. Results of analysis of five heavy metals (Pb, Mn, Fe, Zn, and Cu) analysed in leaf and flower of 8 samples of Cymbopogon validus and Hyparrhenia hirta medicinal plant species are summarized and displayed in Tables 2 and 3 and Figure 1, respectively.

(a)

(b)

(c)

(d)

(e)

The mean trace metal concentration (mg/kg) in the samples of Cymbopogon validus flowers (CVF) were found to be as follows: Cu: ; Zn: ; Fe: ; Mn: ; Pb: mg/kg; Cymbopogon validus leaves (CVL) showed the following: Cu: ; Zn: ; Fe: ; Mn: ; Pb: mg/kg, while in samples of Hyparrhenia hirta flower (HHF) the following was observed: Cu: ; Zn: ; Fe: ; Mn: ; Pb: mg/kg; Hyparrhenia hirta leaves (HHL) gave the following: Cu: ; Zn: ; Fe: ; Mn: ; Pb: mg/kg. Abundance of metal concentrations follows the following order: Cu > Fe > Pb > Mn > Zn in both flower samples of Cymbopogon validus and Hyparrhenia hirta while Cu > Pb > Fe was observed for leave samples of both medicinal plant species. The results indicate the presence of copper, lead, and iron in moderate concentrations; Zn and Mn recorded the lowest concentration in samples taken from Komga road.

Among the medicinal plant species, the average concentration of Cu was the highest in Cymbopogon validus leaves ( mg Cu/kg) followed by Hyparrhenia hirta flower ( mg Cu/kg) and the lowest concentration was found in Hyparrhenia hirta leaves for Zn ( mg Zn/kg) followed by Hyparrhenia hirta flower ( mg Zn/kg). The accumulation of metals by roots, leaves, and flowers increases with increasing available metal concentration in the biota [22]. Also, there is a relationship between the elemental profiles in the medicinal plant and their traditional remedial usage; this should be of paramount importance [23]. Contamination of traditional medicines by heavy metals is of major concern because of the toxicity, persistence, and bioaccumulative nature of such metals [24]. Even though WHO has formulated guidelines for quality assurance and control of herbal medicine, traditional practitioners lack enough knowledge which may result in medication with various types of heavy metal contamination.

High levels of copper concentrations were found in dry leaves of Cymbopogon validus mg Cu/kg; fresh flowers of Cymbopogon validus contain mg Cu/kg, followed by fresh Hyparrhenia hirta flowers mg Cu/kg and fresh Hyparrhenia hirta leaves mg Cu/kg while very low concentration was observed in dry Cymbopogon validus flowers mg Cu/kg as displayed in Figure 1(a).

Copper is one of the crucial elements for plants and animal and essential mirconutrients for neutrological syetems and nervous system myelin sheaths [25]. Various metalloenzymes that are involved in haematopoiesis, vascular and skeletal tissues, catecholamine synthesis, and structure of nervous system are related to the significance of copper [25]; however, it can be toxic at excessive levels [26]. Copper concentration regulatory limits in herbal medicines are yet to be established by WHO/FAO [27]. However, China and Singapore had established limits for copper in medicinal plants at 20 and 150 mg/kg, respectively [27]. Comparing the metal perimeters in the studied selected plant part species with those proposed by China and Singapore, it was observed that all plant part species accumulated Cu below this limit.

Nevertheless, disproportionate ingestion of Cu could lead to the rupturing of erythrocytes and nephrotoxic effects; also, its constant consumption through food crops or herbal medicines may lead to the copper damage in human beings [13] leading to arthritis, growth impairment and reproductive performance, malnutrition, irregular hair growth and depigmentation, failure of the heart, and disturbances in gastrointestinal systems [21, 28].

Zinc is an important component of the human body but its excessiveness may be a suggestion of metal poisoning and growth impedance [29]. The highest level of zinc in both species is found in dry leaves of Cymbopogon validus (2.42 mg Zn/kg) and in low concentrations as it ranges from 0.63, 0.77, and 0.95 mg Zn/kg for dry Cymbopogon validus flowers, dry Hyparrhenia hirta leaves, and fresh Cymbopogon validus flowers, respectively, as seen in Tables 2 and 3 and Figure 1(b). The order of concentration of Zn can be as follows: DCVL > FCVF > DHHL = FCVL > DHHF > FHHF > DCVF > FHHL.

In general, the obtained results revealed that the plant part species studied had concentrations lower than 50 mg/kg, the FAO/WHO permissible limit stipulated for zinc in herbal medicines [12, 30, 31]. Zinc is in a state of competition for absorption with calcium nonheme iron and copper, due to the fact that the elements are all divalent and exist in living-Willian’s series [32] and play a significant part in the synthesis, storage, and discharge of insulin [33].

The Fe concentration profile of medicinal plants part species used in the study are listed in Tables 2 and 3 and displayed in Figure 1(c). As observed from these tables, maximum level of Fe was found in dry flowers of Hyparrhenia hirta mg Fe/kg and the lowest concentration of Fe was observed in fresh Hyparrhenia hirta flowers mg Fe/kg, including fresh flower of Cymbopogon validus mg Fe/kg, dry flowers of Cymbopogon validus mg Fe/kg, fresh leaves of Cymbopogon validus containing mg Fe/kg, and dry leaves of Hyparrhenia hirta containing mg Fe/kg (Figure 1(c)).

There is no permissible limit for iron in medicinal plants established yet by WHO [32, 33]; on the other hand, the permissible limit established for Fe by FAO/WHO [34] in edible plants was 20 mg/kg. When this proposed limit is compared with the iron concentrations in the medicinal plant part species under this study, it was observed to fall below the proposed permissible limit.

Fe is an indispensable element vital for plant photosynthesis, and it is essential for consistent blood supply in human body as iron (Fe) acts as a catalytic agent [35]. It also accelerates the oxidation of protein, carbohydrates, and fats to regulate body weight, an imperative dynamic in diabetes [17].

It is worth noting that excessive iron in the body can lead to prolonged effects that may be lethal for homeostasis [36]. Toxicity of Fe exhibits an antagonistic effect on different metabolic activities and cardiovascular system [37]. On the contrary, low iron content could bring about nose bleeding, gastrointestinal infection, and myocardial infarction [38]. The concentration of lead in the samples varied slightly in Cymbopogon validus flowers, Cymbopogon validus leaves, Hyparrhenia hirta flowers, and Hyparrhenia hirta leaves with average levels of , , , and mg Pb/kg, respectively, as displayed in Figure 1(d).

The Pb levels can be found in the following order: DCVL > FHHF > FCVL > FHHL > FCVF > DHHL > DHHF > DCVF. The medicinal plant part species (flower and leaf) contained tremendously lower concentrations of Pb when compared to the permissible limit of 10 mg/kg established by WHO [31]. Lead is a nonessential element having no function in the human body or in plants, because it brings about acute and chronic poisoning and poses adverse effects on kidney, liver, and vascular and immune systems [39]. Human exposure to lead concentrations brings about reproductive dysfunction that exhibits biochemical-morphological features including decreased sperm quality, disorganized epithelia, and altered sperm morphology [21]. Constant usage of fertilizer, use of leaded gasoline, and sewage sludge are some of the major sources leading to intensification in Pb pollution in the ecosystem [7, 21].

Concentration of lead above permissible limits in medicinal plants and herbs has been reported in previous studies. Example of such is medicinal herbs in Jordan which were found to be 13.9, 13.1, and 16.9 mg Pb/kg on a dry weight basis, respectively [40]. Pb content of Gunnera perpensa, a medicinal plant from Mabandla Village, KwaZulu-Natal Province, South Africa, has been reported to have values above the permissible limit set by FAO/WHO [36] in edible plants [41]. Likewise in Egyptian and Iranian spices and medicinal plants, maximum lead levels of 14.4 and 21.7 mg/kg on a dry weight basis have been reported, respectively [42, 43].

Manganese is among the principal minerals associated with carbohydrate and fat metabolism [44]. The concentration of manganese in Hyparrhenia hirta and Cymbopogon validus is in an array of mg Mn/kg to mg Mn/kg for flowers of Cymbopogon validus and mg Mn/kg to mg Mn/kg for leaves of Hyparrhenia hirta as displayed in Tables 2 and 3 and Figure 1(e). The order of Mn concentration in the medicinal plant part species is as follows: FCVF > FCVL = DCVL > DHHL > FHHF > DHHF = FHHL > DCVF.

For medicinal plants, the WHO [31] limit is yet to be set for Mn; however, the permissible limit of Mn according to FAO/WHO [34] in edible plants is 2 mg/kg. In comparison of this limit with the results obtained from this study, Cymbopogon validus and Hyparrhenia hirta plant part species contain lower levels of Mn. Mtunzi and coworkers [41] reported Berkheya setifera collected from Mabandla Village, KwaZulu-Natal Province of South Africa, to accumulate Mn above the permissible limit on dry mass basis. A study by Sheded et al. [45] indicated that manganese levels in selected medicinal herbs of Egypt were in the range of 44.6 and 339 mg/kg while Jabeen et al. [46] reported a range of Mn variation with values between 32.64 mg/kg in Justicia adhatoda and 105.56 mg/kg in Achyranthes aspera on dry mass basis.

Mn is vital in regular reproductive activities and normal functioning of the central nervous system and also acts as cofactor for many enzymes. Elevated concentrations of manganese cause adverse effects mostly on the lungs and on the brain [47]. Its deficiency causes the disruption of blood supply to a part of the heart, triggering heart cells death [41]; it also causes myocardial infection, cardiovascular diseases, and disorder of bony cartilaginous growth in youngsters and leads to immunodeficiency disorder and rheumatic arthritis in adults [17, 38].

The results of FAAS analysis indicated that trace metals were present in varied concentrations in the eight samples of the traditional medicinal plant species commonly used in Eastern Cape, South Africa. The levels of trace metals in the plant species were of lower concentrations than internationally accepted permissible levels. Toxic metals accumulation varies significantly among plant species; toxic element uptake by plants is predominantly dependent on plant species and soil quality and its intrinsic controls [35]. Highly polluted locations are accountable for heavy metal accumulation in plant parts, consumed either raw or as finished herbal products [7].

4. Conclusion

Medicinal plant (MP) continues to play a crucial part, to a large extent, in the healthcare scheme of the world's populace. Fresh and dry Cymbopogon validus and Hyparrhenia hirta leaves and flowers contain trace metals: iron, copper, zinc, manganese, and lead in different degrees. The results indicate the presence of copper, lead, and iron in moderate concentrations; Zn and Mn recorded the lowest concentrations. The mineral contents in Cymbopogon validus parts for Cu and Zn are in the following order: DCVL > FCVF > FCVL > DCVF, whereas in Hyparrhenia hirta for Cu and Pb they are in the order: FHHF > FHHL > DHHF > DHHL. Comparison of the results with the defined permissible concentration limits by WHO showed that the levels of elements content in the locally available medicinal plant parts species under investigation fall below the permissible range and, hence, contribute no metal toxicity to the surrounding populace. Human health of the immediate users may not be affected by these medicinal plant part species when consumed orally or used for diet preparation. It is suggested that farming of herbal medicinal plants within the diameter closer to the vicinity of industries and high human activities be discouraged, as there might be probability of heavy metals uptake by medicinal plant parts, which will in turn end up in the food chain and finally to humans via herbs consumption. Furthermore, there should be a constant investigation into the effectiveness and safety measures of medicinal plants collected around anthropogenic activities while using the medicinal herbs for healthcare purposes.

Competing Interests

The authors declare that there is no conflict of interests concerning the publication of this paper.

Authors’ Contributions

All authors contributed to the development of the manuscript.

Acknowledgments

The authors acknowledge Govan Mbeki Research and Development Centre (GMRDC), University of Fort Hare, and NRF–Sasol Inzalo and Directorate of Research and Development, Walter Sisulu University for financial support.

References

N. R. Farnsworth and D. D. Soejarto, “Global importance of medicinal plants,” in The Conservation of Medicinal Plants, O. Akerele, V. Heywood, and H. Synge, Eds., pp. 25–51, Cambridge University Press, Cambridge, UK, 1991.
View at: Google Scholar
M. A. S. Arfin Khana, S. A. Mukul, M. S. Uddin, M. G. Kibria, and F. Sultana, “The use of medicinal plants in healthcare practices by Rohingya refugees in a degraded forest and conservation area of Bangladesh,” International Journal of Biodiversity Science & Management, vol. 5, no. 2, pp. 76–82, 2009.
View at: Publisher Site | Google Scholar
S. C. Mandal, V. Mandal, and A. K. Das, Essentials of Botanical Extraction: Principles and Applications, Academic Press, Cambridge, Mass, USA, 1st edition, 2015.
W. Rungsung, K. K. Ratha, S. Dutta, A. K. Dixit, and J. Hazra, “Secondary metabolites of plants in drugs discovery,” World Journal of Pharmaceutical Research, vol. 4, no. 7, pp. 604–613, 2015.
View at: Google Scholar
K. G. Ramawat, S. Dass, and M. Mathur, “The chemical diversity of bioactive molecules and therapeutic potential of medicinal plants,” in Herbal Drugs: Ethnomedicine to Modern Medicine, K. G. Ramawat, Ed., pp. 7–32, Springer, Berlin, Germany, 2009.
View at: Google Scholar
M. Szeto, “Coriolus versicolor extracts: relevance in cancer management,” Current Oncology, vol. 15, no. 2, pp. 41–47, 2008.
View at: Publisher Site | Google Scholar
A. Kulhari, A. Sheorayan, S. Bajar, S. Sarkar, A. Chaudhury, and R. K. Kalia, “Investigation of heavy metals in frequently utilized medicinal plants collected from environmentally diverse locations of north western India,” SpringerPlus, vol. 2, article 676, pp. 2–9, 2013.
View at: Publisher Site | Google Scholar
S. P. S. Khanuja, A. K. Shasany, A. Pawar et al., “Essential oil constituents and RAPD markers to establish species relationship in Cymbopogon Spreng. (Poaceae),” Biochemical Systematics and Ecology, vol. 33, no. 2, pp. 171–186, 2005.
View at: Publisher Site | Google Scholar
N. Lal and S. K. Awasthi, “A comparative assessment of molecular marker assays (AFLP and RAPD) for Cymbopogon Germplasm characterization,” World Journal of Pharmaceutical Research, vol. 4, no. 2, pp. 1019–1041, 2015.
View at: Google Scholar
R. N. de Almeida, M. de Fátima Agra, F. N. S. Maior, and D. P. De Sousa, “Essential oils and their constituents: anticonvulsant activity,” Molecules, vol. 16, no. 3, pp. 2726–2742, 2011.
View at: Publisher Site | Google Scholar
M. Bouaziz, N. C. Veitch, R. J. Grayer, M. S. J. Simmonds, and M. Damak, “Flavonolignans from Hyparrhenia hirta,” Phytochemistry, vol. 60, no. 5, pp. 515–520, 2002.
View at: Publisher Site | Google Scholar
R. Dghaim, S. Al Khatib, H. Rasool, and M. A. Khan, “Determination of heavy metals concentration in traditional herbs commonly consumed in the United Arab Emirates,” Journal of Environmental and Public Health, vol. 2015, Article ID 973878, 6 pages, 2015.
View at: Publisher Site | Google Scholar
J. O. Olowoyo, O. O. Okedeyi, N. M. Mkolo, G. N. Lion, and S. T. R. Mdakane, “Uptake and translocation of heavy metals by medicinal plants growing around a waste dump site in Pretoria, South Africa,” South African Journal of Botany, vol. 78, pp. 116–121, 2012.
View at: Publisher Site | Google Scholar
D. Desideri, M. A. Meli, and C. Roselli, “Determination of essential and non-essential elements in some medicinal plants by polarised X-ray fluorescence spectrometer (EDPXRF),” Microchemical Journal, vol. 95, no. 2, pp. 174–180, 2010.
View at: Publisher Site | Google Scholar
M. Saeed, N. Muhammad, H. Khan, and Zakiullah, “Assessment of heavy metal content of branded Pakistani herbal products,” Tropical Journal of Pharmaceutical Research, vol. 10, no. 4, pp. 499–506, 2011.
View at: Google Scholar
M. Rahimi, R. Farhadi, and M. Balashahri, “Effects of heavy metals on the medicinal plant,” International Journal of Agronomy and Plant Production, vol. 3, no. 4, pp. 154–158, 2012.
View at: Google Scholar
S. A. Khan, L. Khan, I. Hussain, K. B. Marwat, and N. Akhtar, “Profile of heavy metals in selected medicinal plants,” Pakistan Journal of Weed Sciences Research, vol. 14, no. 1-2, pp. 101–110, 2008.
View at: Google Scholar
AOAC, Official Methods of Analysis of AOAC International, AOAC International, Arlington, Va, USA, 16th edition, 1995.
A. K. Meena, P. Bansal, S. Kumar, M. M. Rao, and V. K. Garg, “Estimation of heavy metals in commonly used medicinal plants: a market basket survey,” Environmental Monitoring and Assessment, vol. 170, no. 1, pp. 657–660, 2010.
View at: Publisher Site | Google Scholar
C. W. Huie, “A review of modern sample-preparation techniques for the extraction and analysis of medicinal plants,” Analytical and Bioanalytical Chemistry, vol. 373, no. 1-2, pp. 23–30, 2002.
View at: Publisher Site | Google Scholar
I. P. Ejidike and P. C. Onianwa, “Assessment of trace metals concentration in tree barks as indicator of atmospheric pollution within Ibadan City, South-West, Nigeria,” Journal of Analytical Methods in Chemistry, vol. 2015, Article ID 243601, 8 pages, 2015.
View at: Publisher Site | Google Scholar
A. Haghighitalab, M. Karami, and E. Sadeghi, “Investigation of heavy metals with some methods on plants,” International Journal of Agriculture and Crop Sciences, vol. 6, no. 7, pp. 356–360, 2013.
View at: Google Scholar
B. Mohanta, A. Chakraborty, M. Sudarshan, R. K. Dutta, and M. Baruah, “Elemental profile in some common medicinal plants of India. Its correlation with traditional therapeutic usage,” Journal of Radioanalytical and Nuclear Chemistry, vol. 258, no. 1, pp. 175–179, 2003.
View at: Publisher Site | Google Scholar
P. Dzomba, T. Chayamiti, and E. Togarepi, “Heavy metal content of selected raw medicinal plant materials: implication for patient health,” Bulletin of Environment, Pharmacology and Life Sciences, vol. 1, no. 10, pp. 28–33, 2012.
View at: Google Scholar
J. C. Tan, D. L. Burns, and H. R. Jones, “Severe ataxia, myelopathy, and peripheral neuropathy due to acquired copper deficiency in a patient with history of gastrectomy,” Journal of Parenteral and Enteral Nutrition, vol. 30, no. 5, pp. 446–450, 2006.
View at: Publisher Site | Google Scholar
M. A. Khan, I. Ahmad, and I. U. Rahman, “Effect of environmental pollution on heavy metals content of Withania somnifera,” Journal of the Chinese Chemical Society, vol. 54, no. 2, pp. 339–343, 2007.
View at: Publisher Site | Google Scholar
B. A. Abdu, U. Adamu, O. O. Joshua, and S. M. Sani, “Heavy metals profiles and potential risk in herbal remedies produced in north western Nigeria,” International Journal of Research in Ayurveda and Pharmacy, vol. 6, no. 5, pp. 638–642, 2015.
View at: Publisher Site | Google Scholar
K. O. Soetan, C. O. Olaiya, and O. E. Oyewole, “The importance of mineral elements for humans, domestic animals and plants: a review,” African Journal of Food Science, vol. 4, no. 5, pp. 200–222, 2010.
View at: Google Scholar
K. B. Singh and S. K. Taneja, “Concentration of Zn, Cu and Mn in vegetables and meat foodstuffs commonly available in Manipur: a North Eastern State of India,” Electronic Journal of Environmental, Agricultural and Food Chemistry, vol. 9, no. 3, pp. 610–616, 2010.
View at: Google Scholar
A.-W. O. El-Rjoob, A. M. Massadeh, and M. N. Omari, “Evaluation of Pb, Cu, Zn, Cd, Ni and Fe levels in Rosmarinus officinalis labaiatae (Rosemary) medicinal plant and soils in selected zones in Jordan,” Environmental Monitoring and Assessment, vol. 140, no. 1, pp. 61–68, 2008.
View at: Publisher Site | Google Scholar
A. Shah, A. Niaz, N. Ullah et al., “Comparative study of heavy metals in soil and selected medicinal plants,” Journal of Chemistry, vol. 2013, Article ID 621265, 5 pages, 2013.
View at: Publisher Site | Google Scholar
N. Sanjay, M. Tiwari, and A. Chauhan, “Elementals profile of some important medicinal plants of Uttarakhand State, India,” Report and Opinion, vol. 2, no. 6, pp. 34–36, 2010.
View at: Google Scholar
A.-M. Roussel, A. Kerkeni, N. Zouari, S. Mahjoub, J.-M. Matheau, and R. A. Anderson, “Antioxidant effects of zinc supplementation in Tunisians with type 2 diabetes mellitus,” Journal of the American College of Nutrition, vol. 22, no. 4, pp. 316–321, 2003.
View at: Publisher Site | Google Scholar
FAO/WHO, “Contaminants,” in Codex Alimentarius, vol. 17, FAO/WHO, Codex Alimentarius Commission, Rome, Italy, 1st edition, 1984.
View at: Google Scholar
A. Mahmood, S. Rashid, and R. N. Malik, “Determination of toxic heavy metals in indigenous medicinal plants used in Rawalpindi and Islamabad cities, Pakistan,” Journal of Ethnopharmacology, vol. 148, no. 1, pp. 158–164, 2013.
View at: Publisher Site | Google Scholar
D. R. Hashmi, S. Ismail, and G. H. Shaikh, “Assessment of the level of trace metals in commonly edible vegetables locally available in the markets of Karachi city,” Pakistan Journal of Botany, vol. 39, no. 3, pp. 747–751, 2007.
View at: Google Scholar
S. Martin and W. Griswold, “Human health effects of heavy metals,” in Environmental Science and Technology Briefs for Citizens, vol. 15, pp. 1–6, Centre for Hazardous Substance Research, Manhattan, Kan, USA, 2009.
View at: Google Scholar
F. U. Khan, M. U. R. Khattak, F. A. Khan, I. U. Rehman, and I. Hussain, “Analysis of heavy metals in selected medicinal plants from Dir, Swat and Peshawar Districts of Khyber Pakhtunkwa,” Journal of the Chemical Society of Pakistan, vol. 33, no. 4, pp. 495–498, 2011.
View at: Google Scholar
R. B. Hayes, “The carcinogenicity of metals in humans,” Cancer Causes and Control, vol. 8, no. 3, pp. 371–385, 1997.
View at: Publisher Site | Google Scholar
A. Alomary, E. El Jamal, I. Al-Momani, A. Attiyat, and S. Obeidat, “Pb in medicinal plants from Jordan,” Environmental Chemistry Letters, vol. 11, no. 1, pp. 55–63, 2013.
View at: Publisher Site | Google Scholar
F. Mtunzi, E. Muleya, J. Modise, A. Sipamla, and E. Dikio, “Heavy metals content of some medicinal plants from Kwazulu-Natal, South Africa,” Pakistan Journal of Nutrition, vol. 11, no. 9, pp. 757–761, 2012.
View at: Google Scholar
A. A. K. Abou-Arab and M. A. Abou Donia, “Heavy metals in egyptian spices and medicinal plants and the effect of processing on their levels,” Journal of Agricultural and Food Chemistry, vol. 48, no. 6, pp. 2300–2304, 2000.
View at: Publisher Site | Google Scholar
P. Ziarati, “Determination of contaminants in some Iranian popular herbal medicines,” Journal of Environmental & Analytical Toxicology, vol. 2, no. 1, pp. 1–3, 2012.
View at: Publisher Site | Google Scholar
M. Kirmani, S. Mohiuddin, F. Naz, I. Naqvi, and E. Zahir, “Determination of some toxic and essential trace metals in some medicinal and edible plants of Karachi city,” Journal of Basic and Applied Sciences, vol. 7, no. 2, pp. 89–95, 2011.
View at: Google Scholar
M. G. Sheded, I. D. Pulford, and A. I. Hamed, “Presence of major and trace elements in seven medicinal plants growing in the South-Eastern Desert, Egypt,” Journal of Arid Environments, vol. 66, no. 2, pp. 210–217, 2006.
View at: Publisher Site | Google Scholar
S. Jabeen, M. T. Shah, S. Khan, and M. Q. Hayat, “Determination of major and trace elements in ten important folk therapeutic plants of Haripur basin, Pakistanx,” Journal of Medicinal Plants Research, vol. 4, no. 7, pp. 559–566, 2010.
View at: Google Scholar
E. Ernst, “Toxic heavy metals and undeclared drugs in Asian herbal medicines,” Trends in Pharmacological Sciences, vol. 23, no. 3, pp. 136–139, 2002.
View at: Publisher Site | Google Scholar

Copyright

Copyright © 2016 Babalwa Tembeni et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

1144

Downloads

874

Citations