Copyright © 2008 P. Zhang and S. X. Ding. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

1. M. Basseville and I. Nikiforov, Detection of Abrupt Changes —Theory and Application, Prentice-Hall, Englewood Cliffs, NJ, USA, 1993.
2. J. Gertler, Fault Detection and Diagnosis in Engineering Systems, Marcel Dekker, New York, NY, USA, 1998.
3. R. Mangoubi, Robust Estimation and Failure Detection, Springer, New York, NY, USA, 1998.
4. J. Chen and R. J. Patton, Robust Model-Based Fault Diagnosis for Dynamic Systems, Kluwer Academic Publishers, Boston, Mass, USA, 1999.
5. R. J. Patton, P. M. Frank, and R. N. Clark, Issues of Fault Diagnosis for Dynamic Systems, Springer, London, UK, 2000.
6. M. Blanke, M. Kinnaert, J. Lunze, and M. Staroswiecki, Diagnosis and Fault-Tolerant Control, Springer, New York, NY, USA, 2003.
7. P. M. Frank, S. X. Ding, and T. Marcu, “Model-based fault diagnosis in technical processes,” Transactions of the Institute of Measurement and Control, vol. 22, no. 1, pp. 57–101, 2000. View at Publisher · View at Google Scholar
8. E. Y. Chow and A. S. Willsky, “Analytical redundancy and the design of robust failure detection systems,” IEEE Transactions on Automatic Control, vol. 29, pp. 603–614, 1984. View at Publisher · View at Google Scholar · View at MathSciNet
9. H. Ishii and B. Francis, Limited Data Rate in Control Systems with Networks, Springer, Berlin, Germany, 2002.
10. K. Zhou, Essential of Robust Control, Prentice-Hall, Englewood Cliffs, NJ, USA, 1998.
11. J. Wuennenberg, Observer-Based Fault Detection in Dynamic Systems, Ph.D. thesis, University of Duisburg, Duisburg, Germany, 1990.
12. S. X. Ding, E. L. Ding, T. Jeinsch, and P. Zhang, “An approach to a unifi…ed design of FDI systems,” in Proceedings of the 3rd Asian Control Conference, pp. 2812––2817, Shanghai, China, July 2000.
13. S. X. Ding, E. L. Ding, and T. Jeinsch, “A numerical approach to optimization of FDI systems,” in Proceedings of the 37th IEEE Conference on Decision and Control (CDC '98), pp. 1137––1142, Tampa, Fla, USA, December 1998. View at Publisher · View at Google Scholar
14. S. X. Ding, E. L. Ding, and T. Jeinsch, “An approach to analysis and design of observer and parity relation based FDI systems,” in Proceedings of the 14th Triennial World Congress of the International Federation of Automatic Control, pp. 37––42, Beijing, China, July 1999.
15. S. Schneider, N. Weinhold, S. X. Ding, and A. Rehm, “Parity space based FDI-scheme for vehicle lateral dynamics,” in Proceedings of the IEEE International Conference on Control Applications (CCA '05), pp. 1409––1414, Toronto, Canada, August 2005. View at Publisher · View at Google Scholar
16. X. Ding, L. Guo, and T. Jeinsch, “A characterization of parity space and its application to robust fault detection,” IEEE Transactions on Automatic Control, vol. 44, no. 2, pp. 337–343, 1999. View at Publisher · View at Google Scholar · View at MathSciNet
17. H. Ye, G. Z. Wang, S. X. Ding, and H. Y. Su, “An IIR …filter based parity space approach for fault detection,” in Proceedings of the 15th Triennial World Congress of the International Federation of Automatic Control, Barcelona, Spain, July 2002.
18. P. Zhang and S. X. Ding, “Multi-objective design of robust fault detection systems,” in Proceedings of the 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes (SAFEPROCESS '06), pp. 1453––1458, Beijing, China, August-September 2006.
19. S. X. Ding, P. Zhang, B. Huang, E. L. Ding, and P. M. Frank, “An approach to norm and statistical methods based residual evaluation,” in Proceedings of the 10th IEEE International Conference on Methods and Models in Automation and Robotics (MMAR '04), pp. 777–780, Miedzyzdroje, Poland, August-September 2004.
20. X. Ding and P. M. Frank, “Fault detection via factorization approach,” Systems and Control Letters, vol. 14, no. 5, pp. 431–436, 1990. View at Publisher · View at Google Scholar · View at MathSciNet
21. X. Ding and P. M. Frank, “Fault detection via optimally robust detection filters,” in Proceedings of the 28th Conference on Decision and Control (CDC '89), vol. 2, pp. 1767–1772, Tampa, Fla, USA, December 1989. View at Publisher · View at Google Scholar
22. S. X. Ding, T. Jeinsch, P. M. Frank, and E. L. Ding, “A unifi…ed approach to the optimization of fault detection systems,” International Journal of Adaptive Control and Signal Processing, vol. 14, no. 7, pp. 725–745, 2000. View at Publisher · View at Google Scholar
23. P. Zhang, S. X. Ding, G. Z. Wang, and D. H. Zhou, “An approach to fault detection of sampled-data systems,” submitted to IEEE Transactions on Automatic Control.
24. P. Zhang, S. X. Ding, G. Z. Wang, and D. H. Zhou, “Fault detection of linear discrete-time periodic systems,” IEEE Transactions on Automatic Control, vol. 50, no. 2, pp. 239–244, 2005. View at Publisher · View at Google Scholar · View at MathSciNet
25. N. Liu and K. Zhou, “Optimal and analytic solutions to robust fault detection problems,” submitted to IEEE Transactions on Automatic Control.
26. P. Zhang, S. X. Ding, G. Z. Wang, D. H. Zhou, and E. L. Ding, “An $H_{\infty }$ approach to fault detection for sampled-data systems,” in Proceedings of the American Control Conference (ACC '02), vol. 3, pp. 2196–2201, Anchorage, Alaska, USA, May 2002. View at Publisher · View at Google Scholar
27. P. Zhang, H. Ye, S. X. Ding, G. Z. Wang, and D. H. Zhou, “On the relationship between parity space and $H_2$ approaches to fault detection,” Systems and Control Letters, vol. 55, no. 2, pp. 94–100, 2006. View at Publisher · View at Google Scholar · View at MathSciNet
28. H. Ye, S. X. Ding, and G. Z. Wang, “Integrated design of fault detection systems in time-frequency domain,” IEEE Transactions on Automatic Control, vol. 47, no. 2, pp. 384–390, 2002. View at Publisher · View at Google Scholar · View at MathSciNet
29. H. Ye, G. Z. Wang, and S. X. Ding, “A new parity space approach for fault detection based on stationary wavelet transform,” IEEE Transactions on Automatic Control, vol. 49, no. 2, pp. 281–287, 2004. View at Publisher · View at Google Scholar · View at MathSciNet
30. S. X. Ding, P. M. Frank, E. L. Ding, and T. Jeinsch, “Fault detection system design based on a new trade-off strategy,” in Proceedings of the 39th IEEE Conference on Decision and Control (CDC '00), vol. 4, pp. 4144–4149, Sydney, Australia, December 2000. View at Publisher · View at Google Scholar
31. P. M. Frank and X. Ding, “Frequency domain approach to optimally robust residual generation and evaluation for model-based fault diagnosis,” Automatica, vol. 30, no. 5, pp. 789–904, 1994. View at Publisher · View at Google Scholar
32. P. Zhang, S. X. Ding, G. Z. Wang, and D. H. Zhou, “Fault detection for linear discrete-time periodic systems,” in Proceedings of the 5th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes (SAFEPROCESS '03), pp. 247–252, Washington, DC, USA.
33. M. Hou and R. J. Patton, “An LMI approach to $H_{-}$/$H_{\infty }$ fault detection observers,” in Proceedings of the UKACC International Conference on Control, vol. 1, pp. 305–310, Exeter, UK, September 1996.
34. F. Rambeaux, F. Hamelin, and D. Sauter, “Robust residual generation via LMI,” in Proceedings of the 14th Triennial World Congress of the International Federation of Automatic Control, pp. 240–246, Beijing, China, July 1999.
35. D. Henry and A. Zolghadri, “Design and analysis of robust residual generators for systems under feedback control,” Automatica, vol. 41, no. 2, pp. 251–264, 2005. View at Publisher · View at Google Scholar · View at MathSciNet
36. J. Liu, J. L. Wang, and G.-H. Yang, “An LMI approach to minimum sensitivity analysis with application to fault detection,” Automatica, vol. 41, no. 11, pp. 1995–2004, 2005. View at Publisher · View at Google Scholar · View at MathSciNet
37. R. H. Chen, D. L. Mingori, and J. L. Speyer, “Optimal stochastic fault detection filter,” Automatica, vol. 39, no. 3, pp. 377–390, 2003. View at Publisher · View at Google Scholar · View at MathSciNet
38. S. Bittanti and P. Colaneri, “Analysis of discrete-time linear periodic systems,” Control and Dynamics Systems, vol. 78, pp. 313–339, 1996.
39. P. Colaneri and V. Kucera, “The model matching problem for periodic discrete-time systems,” IEEE Transactions on Automatic Control, vol. 42, no. 10, pp. 1472–1476, 1997. View at Publisher · View at Google Scholar · View at MathSciNet
40. B. P. Lampe, M. A. Obraztsov, and E. N. Rosenwasser, “Statistical analysis of stable FDLCP systems by parametric transfer matrices,” International Journal of Control, vol. 78, no. 10, pp. 747–761, 2005. View at Publisher · View at Google Scholar · View at MathSciNet
41. S. Bittanti and P. Colaneri, “Periodic Control,” in John Wiley Encyclopaedia on Electrical and Electronic Engineering, J. Webster, Ed., vol. 16, pp. 240–253, John Wiley & Sons, New York, NY, USA, 1999.
42. S. Bittanti and P. Colaneri, “Invariant representations of discrete-time periodic systems,” Automatica, vol. 36, no. 12, pp. 1777–1793, 2000. View at Publisher · View at Google Scholar
43. M. S. Fadali and S. Gummuluri, “Robust observer-based fault detection for periodic systems,” in Proceedings of the American Control Conference (ACC '01), vol. 1, pp. 464–469, Arlington,Va, USA, June 2001. View at Publisher · View at Google Scholar
44. A. Varga, “Design of fault detection filters for periodic systems,” in Proceedings of the 43rd IEEE Conference on Decision and Control (CDC '04), pp. 4800–4805, Atlantis, Bahamas, December 2004. View at Publisher · View at Google Scholar
45. P. Zhang, S. X. Ding, and T. Jeinsch, “Study on full decoupling problem of linear periodic systems,” in Proceedings of the 16th Triennial World Congress of the International Federation of Automatic Control, Prague, Czech Republic, July 2005.
46. T. W. Chen and B. Francis, Optimal Sampled-Data Control Systems, Springer, London, UK, 1995.
47. E. Rosenwasser and B. P. Lampe, Computer Controlled Systems–Analysis and Design with Process-Orientated Models, Springer, London, UK, 2000.
48. G. M. Kranc, “Input-output analysis of multirate feedback systems,” IRE Transactions on Automatic Control, vol. 3, no. 1, pp. 21–28, 1957. View at Publisher · View at Google Scholar
49. R. E. Kalman and J. E. Bertram, “A unified approach to the theory of sampling systems,” Journal of the Franklin Institute, vol. 267, no. 5, pp. 405–436, 1959. View at Publisher · View at Google Scholar
50. R. A. Meyer and C. S. Burrus, “A unified analysis of multirate and periodically time-varying digital filters,” IEEE Transactions on Circuits and Systems, vol. 22, no. 3, pp. 162–168, 1975. View at Publisher · View at Google Scholar
51. M. Araki and T. Hagiwara, “Pole assignment by multirate sampled-data output feedback,” International Journal of Control, vol. 44, no. 6, pp. 1661–1673, 1986.
52. L. Qiu and T. W. Chen, “Multirate sampled-data systems: all $H_{\infty }$ suboptimal controllers and the minimum entropy controller,” IEEE Transactions on Automatic Control, vol. 44, no. 3, pp. 537–550, 1999. View at Publisher · View at Google Scholar · View at MathSciNet
53. S. Lall and G. Dullerud, “An LMI solution to the robust synthesis problem for multi-rate sampled-data systems,” Automatica, vol. 37, no. 12, pp. 1909–1922, 2001. View at Publisher · View at Google Scholar · View at MathSciNet
54. J. Sheng, T. W. Chen, and S. L. Shah, “Generalized predictive control for non-uniformly sampled systems,” Journal of Process Control, vol. 12, no. 8, pp. 875–885, 2002. View at Publisher · View at Google Scholar
55. G. Kreisselmeier, “On sampling without loss of observability/controllability,” IEEE Transactions on Automatic Control, vol. 44, no. 5, pp. 1021–1025, 1999. View at Publisher · View at Google Scholar · View at MathSciNet
56. W. Li, S. L. Shah, and D. Y. Xiao, “Kalman …filters for non-uniformly sampled multirate systems,” in Proceedings of the 16th Triennial World Congress of the International Federation of Automatic Control, Prague, Czech Republic, July 2005.
57. W. Li, Z. Han, and S. L. Shah, “Subspace identification for FDI in systems with non-uniformly sampled multirate data,” Automatica, vol. 42, no. 4, pp. 619–627, 2006. View at Publisher · View at Google Scholar · View at MathSciNet
58. P. Zhang, S. X. Ding, G. Z. Wang, and D. H. Zhou, “An FDI approach for sampled-data systems,” in Proceedings of the American Control Conference (ACC '01), vol. 4, pp. 2702–2707, Arlington, Va, USA, June 2001. View at Publisher · View at Google Scholar
59. P. Zhang, S. X. Ding, G. Z. Wang, and D. H. Zhou, “A frequency domain approach to fault detection in sampled-data systems,” Automatica, vol. 39, no. 7, pp. 1303–1307, 2003. View at Publisher · View at Google Scholar
60. P. Zhang, S. X. Ding, G. Z. Wang, and D. H. Zhou, “An approach to fault detection of sampled-data systems,” Institute of Automatic Control and Complex Systems(AKS), University of Duisburg, Duisburg, Germany, 2003.
61. N. Viswanadham and K. D. Minto, “Fault diagnosis in multirate sampled data systems,” in Proceedings of the 29th IEEE Conference on Decision and Control (CDC '90), vol. 6, pp. 3666–3671, Honolulu, Hawaii, USA, December 1990. View at Publisher · View at Google Scholar
62. M. S. Fadali and W. Liu, “Fault detection for systems with multirate sampling,” in Proceedings of the American Control Conference (ACC '98), pp. 3302––3306, Philadelphia, Pa, USA, June 1998. View at Publisher · View at Google Scholar
63. M. S. Fadali and W. Liu, “Observer-based robust fault detection for a class of multirate sampled-data linear systems,” in Proceedings of the American Control Conference (ACC '99), vol. 1, pp. 97–98, San Diego, Calif, USA, June 1999. View at Publisher · View at Google Scholar
64. M. S. Fadali and H. E. Emara-Shabaik, “Robust fault detection for a class of multirate linear systems,” in Proceedings of the American Control Conference (ACC '00), vol. 2, pp. 1210–1214, Chicago, Ill, USA, June 2000. View at Publisher · View at Google Scholar
65. P. Zhang, S. X. Ding, G. Z. Wang, and D. H. Zhou, “Fault detection for multirate sampled-data systems with time delays,” International Journal of Control, vol. 75, no. 18, pp. 1457–1471, 2002. View at Publisher · View at Google Scholar · View at MathSciNet
66. P. Zhang, S. X. Ding, G. Z. Wang, and D. H. Zhou, “Observer-based approaches to fault detection in multirate sampled-data systems,” in Proceedings of the 4th Asian Control Conference, pp. 1367–1372, Singapore, September 2002.
67. I. Izadi, Q. Zhao, and T. W. Chen, “An optimal scheme for fast rate fault detection based on multirate sampled data,” Journal of Process Control, vol. 15, no. 3, pp. 307–319, 2005. View at Publisher · View at Google Scholar
68. I. Izadi, Q. Zhao, and T. W. Chen, “An $H_{\infty }$ approach to fast rate fault detection for multirate sampled-data systems,” Journal of Process Control, vol. 16, no. 6, pp. 651–658, 2006. View at Publisher · View at Google Scholar
69. P. Zhang and S. X. Ding, “Fault detection of multirate sampled-data systems based on periodic system theory,” in Proceedings of the European Control Conference, Kos, Greece, July 2007.
70. P. Zhang, S. X. Ding, R. J. Patton, and C. Kambhampati, “Adaptive and cooperative sampling in networked control systems,” in Proceedings of the IEEE International Conference on Networking, Sensing and Control (ICNSC '07), pp. 398–403, London, UK. View at Publisher · View at Google Scholar
71. P. Zhang and S. X. Ding, “On monotonicity of a class of optimal fault detection performance vs. sampling period,” in Proceedings of the 46th IEEE Conference on Decision and Control (CDC '07), New Orleans, La, USA, December 2007.
72. S. X. Ding, P. Zhang, and E. L. Ding, “Observer-based monitoring of distributed net-worked control systems,” in Proceedings of the 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes (SAFEPROCESS '06), pp. 337–342, Beijing, China.
73. P. Zhang and S. X. Ding, “Fault detection of networked control systems with limited communication,” in Proceedings of the 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes (SAFEPROCESS '06), pp. 1135–1140, Beijing, China, August-September 2006.