Research Article
On the Coverage Extension and Capacity Enhancement of Inband Relay Deployments in LTE-Advanced Networks
Table 2
Simulation Parameters.
| Parameter | Value | System Parameters |
| Carrier Frequency | 2 GHz | Bandwidth | 10 MHz | Highest Modulation Scheme | 64-QAM (R = 9/10) | Penetration Loss | 20 dB on eNB-UE and RN-UE links | Bandwidth Efficiency | 0.88 | SINR Efficiency | 1.25 | Thermal Noise PSD | −174 dBm/Hz | SINR lower bound | −7 dB |
| eNB Parameters |
| eNB Transmit Power | 46 dBm | eNB Elevation | 32 m | eNB Antenna Gain | 14 dBi | eNB Antenna Configuration | Tx-2, Rx-2 | eNB Noise Figure | 5 dB | eNB Antenna Pattern | (θ) = −min[12 (θ/)2, m] | = and m = 25 dB |
| UE Parameters |
| UE Antenna Configuration | Tx-1, Rx-2 | UE Antenna Gain | 0 dBi | UE Height | 1.5 m | UE Noise Figure | 9 dB |
| Relay Node Parameters |
| RN Transmit Power | 30 dBm | RN Elevation | 5 m | RN Antenna Configuration | Tx-2, Rx-2 | RN-eNB Antenna Gain | 7 dBi | RN-UE Antenna Gain | 5 dBi | RN Antenna Pattern | Omni-directional | RN Noise Figure | 5 dB |
|
|