About this Journal Submit a Manuscript Table of Contents
Journal of Metallurgy
Volume 2012 (2012), Article ID 290873, 7 pages
http://dx.doi.org/10.1155/2012/290873
Research Article

Effect of Mechanical Milling and Cold Pressing on Co Powder

1Department of Engineering Metallurgy, University of Johannesburg, P.O. Box 17011, Doornfontein 2028, South Africa
2Council for Scientific and Industrial Research (CSIR), Materials Science and Manufacturing, Meiring Naude Road, Brummeria, P.O. Box 395, Pretoria 0001, South Africa
3DST/CSIR Nanotechnology Innovation Centre, National Centre for Nano-Structured Materials, Council for Scientific Industrial Research, P.O. Box 395, Pretoria 0001, South Africa

Received 29 August 2011; Revised 28 October 2011; Accepted 2 November 2011

Academic Editor: Qian Zhao

Copyright © 2012 A. S. Bolokang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

A. S. Bolokang, M. J. Phasha, D. E. Motaung, and S. Bhero, “Effect of Mechanical Milling and Cold Pressing on Co Powder,” Journal of Metallurgy, vol. 2012, Article ID 290873, 7 pages, 2012. doi:10.1155/2012/290873