Research Article
Influence of the Rate and Degree of Deformation on the Texture, Structure and Mechanical Properties of Steel
Table 1
Mechanical properties of the steel at various tensile rates.
| ,
mm/min | ,
MPa | ,
MPa | | | ,
MPa | ,
MPa | | | ,
% | ,
% | | | |
| | 0.1 | 174.2 | 181.1 | 1.00 | 1.00 | 277.9 | 271.9 | 0.63 | 0.66 | 52.9 | 52.3 | 1.96 | 1.34 | 1.65 | | 1.0 | 178.1 | 186.2 | 1.02 | 1.03 | 287.0 | 284.0 | 0.62 | 0.66 | 52.6 | 52.2 | 1.92 | 2.33 | 2.13 | | 60 | 205.0 | 215.9 | 1.18 | 1.19 | 302.1 | 297.3 | 0.68 | 0.73 | 47.9 | 46.5 | 1.99 | 1.81 | 1.90 | | 120 | 213.9 | 222.1 | 1.23 | 1.23 | 307.1 | 299.5 | 0.70 | 0.74 | 48.0 | 46.4 | 1.71 | 2.37 | 2.04 | | 300 | 189.8 | 191.0 | 1.09 | 1.05 | 311.0 | 307.5 | 0.61 | 0.62 | 50.5 | 50.4 | 1.92 | 2.19 | 2.05 |
|
|
