About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [55 citations: 55 articles]

Articles published in Journal of Metallurgy have been cited 55 times. The following is a list of the 55 articles that have cited the articles published in Journal of Metallurgy.

  • T. Baxevanis, A. Cox, and D. C. Lagoudas, “Micromechanics of precipitated near-equiatomic Ni-rich NiTi shape memory alloys,” Acta Mechanica, 2014. View at Publisher · View at Google Scholar
  • B. Rashkova, M. Faller, R. Pippan, and G. Dehm, “Growth mechanism of Al2Cu precipitates during in situ TEM heating of a HPT deformed Al–3wt.%Cu alloy,” Journal of Alloys and Compounds, vol. 600, pp. 43–50, 2014. View at Publisher · View at Google Scholar
  • Li Qiang, Isabel S.S. Pinto, and Zhao Youcai, “Sequential stepwise recovery of selected metals from flue dusts of secondary copper smelting,” Journal of Cleaner Production, 2014. View at Publisher · View at Google Scholar
  • Philippe F. Weck, Christopher D. Taylor, Olayinka Olatunji-Ojo, Xiang-Yang Liu, Edward Mausolf, Gordon D. Jarvinen, and Kenneth R. Czerwinski, “First-Principles and Kinetic Monte Carlo Simulation Studies of the Reactivi ty of Tc(0001), MoTc(111) and MoTc(110) Surfaces,” Journal of The Electrochemical Society, vol. 161, no. 3, pp. C83–C88, 2014. View at Publisher · View at Google Scholar
  • Janko Ferčec, Ivan Anžel, and Rebeka Rudolf, “Stress dependent electrical resistivity of orthodontic wire from the shape memory alloy NiTi,” Materials & Design, vol. 55, pp. 699–706, 2014. View at Publisher · View at Google Scholar
  • Martin Leary, Aleksandar Subic, and Mark A. Gibson, “A review of shape memory alloy research, applications and opportunities,” Materials & Design, vol. 56, pp. 1078–1113, 2014. View at Publisher · View at Google Scholar
  • Alexander Govik, Rikard Rentmeester, and Larsgunnar Nilsson, “A study of the unloading behaviour of dual phase steel,” Materials Science and Engineering: A, vol. 602, pp. 119–126, 2014. View at Publisher · View at Google Scholar
  • Adelaide Nespoli, Villiam Dallolio, Francesco Stortiero, Stefano Besseghini, Francesca Passaretti, and Elena Villa, “Design and thermo-mechanical analysis of a new NiTi shape memory alloy fixing clip,” Materials Science and Engineering: C, 2014. View at Publisher · View at Google Scholar
  • Hans-Erik Ekstrom, and Jesus Mendoza, “Tensile, Fatigue, and Creep Properties of Aluminum Heat Exchanger Tube Allo ys for Temperatures from 293 K to 573 K (20 degrees C to 300 degrees C),” Metallurgical and Materials Transactions A-Physical Metallurgy and Material, vol. 45A, no. 2, pp. 663–681, 2014. View at Publisher · View at Google Scholar
  • John Young, David Field, Ghassan Kridli, Dongsheng Li, and Hussein Zbib, “A study of the hot and cold deformation of twin-roll cast magnesium alloy A Z31,” Philosophical Magazine, vol. 94, no. 4, pp. 381–403, 2014. View at Publisher · View at Google Scholar
  • H. J. Willy, L. Z. Zhao, and G. Wang, “Predictability of bulk metallic glass forming ability using the criteria ba sed on characteristic temperatures of alloys,” Physica B-Condensed Matter, vol. 437, pp. 17–23, 2014. View at Publisher · View at Google Scholar
  • Andrea D. Muschenborn, Keith Hearon, Brent L. Volk, Jordan W. Conway, and Duncan J. Maitland, “Feasibility of Crosslinked Acrylic Shape Memory Polymer for a Thrombectomy Device,” Smart Materials Research, vol. 2014, pp. 1–12, 2014. View at Publisher · View at Google Scholar
  • Wu-Han Liu, Fuh-Sheng Shieu, and Wei-Tien Hsiao, “Enhancement of Wear and Corrosion Resistance of Iron-based Hard Coatings Deposited by High-Velocity Oxygen Fuel (HVOF) Thermal Spraying,” Surface and Coatings Technology, 2014. View at Publisher · View at Google Scholar
  • Dong Wang, Sen Hou, Yu Wang, Xiangdong Ding, Shuai Ren, Xiaobing Ren, and Yunzhi Wang, “Superelasticity of slim hysteresis over a wide temperature range by nanodomains of martensite,” Acta Materialia, 2013. View at Publisher · View at Google Scholar
  • Linda Ansone, Maris Klavins, Maruta Jankevica, and Arturs Viksna, “Biomass sorbents for metalloid removal,” Adsorption, 2013. View at Publisher · View at Google Scholar
  • Dianyin Hu, and Rongqiao Wang, “Combined fatigue experiments on full scale turbine components,” Aircraft Engineering and Aerospace Technology, vol. 85, no. 1, pp. 4–9, 2013. View at Publisher · View at Google Scholar
  • Po-Lin Hsu, Yaxin Wang, Felipe Amaral, Jack Parker, Thomas Schmitz-Rode, Rüdiger Autschbach, and Ulrich Steinseifer, “Design Method of a Foldable Ventricular Assist Device for Minimally Invasive Implantation,” Artificial Organs, 2013. View at Publisher · View at Google Scholar
  • Linda Ansone, Maris Klavins, and Linda Eglite, “Use of peat-based sorbents for removal of arsenic compounds,” Central European Journal of Chemistry, vol. 11, no. 6, pp. 988–1000, 2013. View at Publisher · View at Google Scholar
  • Slawomir Wybraniec, Tadeusz Michalowski, Purificacion Saez-Plaza, and Maria Jose Navas, “An Overview of the Kjeldahl Method of Nitrogen Determination. Part I. Early History, Chemistry of the Procedure, and Titrimetric Finish,” Critical Reviews In Analytical Chemistry, vol. 43, no. 4, pp. 178–223, 2013. View at Publisher · View at Google Scholar
  • M. Martinez-Hernandez, A. Juarez-Hernandez, C. González-Rivera, and M.A.L. Hernandez-Rodriguez, “Bismuth segregation and crack formation on a free lead yellow brass tap,” Engineering Failure Analysis, vol. 28, pp. 63–68, 2013. View at Publisher · View at Google Scholar
  • Punita Mourya, Sitashree Banerjee, Rashmi Bala Rastogi, and Madan Mohan Singh, “Inhibition of Mild Steel Corrosion in Hydrochloric and Sulfuric Acid Media Using a Thiosemicarbazone Derivative,” Industrial & Engineering Chemistry Research, pp. 130827134202005, 2013. View at Publisher · View at Google Scholar
  • Thierry Vanherck, Guillaume Jean, Maurice Gonon, Jacques Lobry, and Francis Cambier, “Spark Plasma Sintering: Homogenization of the Compact Temperature Field for Non Conductive Materials,” International Journal of Applied Ceramic Technology, 2013. View at Publisher · View at Google Scholar
  • T. Carvalho Resende, S. Bouvier, F. Abed-Meraim, T. Balan, and S.-S. Sablin, “Dislocation-based model for the prediction of the behavior of b.c.c. materials – Grain size and strain path effects,” International Journal of Plasticity, 2013. View at Publisher · View at Google Scholar
  • A.S. Bolokang, M.J. Phasha, and S. Bhero, “Comparison of metastable phases induced by heat treatment of unmilled and milled cobalt powders,” International Journal of Refractory Metals and Hard Materials, vol. 36, pp. 111–115, 2013. View at Publisher · View at Google Scholar
  • Stefano Viscuso, and Simone Pittaccio, “Design and implementation of a portable amagnetic shape memory rotary actua tor,” Journal of Intelligent Material Systems and Structures, vol. 24, no. 4, pp. 454–472, 2013. View at Publisher · View at Google Scholar
  • Thomas Voisin, Lise Durand, Nikhil Karnatak, Sophie Le Gallet, Marc Thomas, Yannick Le Berre, Jean-François Castagné, and Alain Couret, “Temperature control during Spark Plasma Sintering and application to up-scaling and complex shaping,” Journal of Materials Processing Technology, vol. 213, no. 2, pp. 269–278, 2013. View at Publisher · View at Google Scholar
  • A. Pavia, L. Durand, F. Ajustron, V. Bley, G. Chevallier, A. Peigney, and C. Estournès, “Electro-thermal measurements and finite element method simulations of a spark plasma sintering device,” Journal of Materials Processing Technology, vol. 213, no. 8, pp. 1327–1336, 2013. View at Publisher · View at Google Scholar
  • Mohamed Sultan Mohamed Ali, Brad Bycraft, Anas Bsoul, and Kenichi Takahata, “Radio-Controlled Microactuator Based on Shape-Memory-Alloy Spiral-Coil Indu ctor,” Journal Of Microelectromechanical Systems, vol. 22, no. 2, pp. 331–338, 2013. View at Publisher · View at Google Scholar
  • Christopher D. Taylor, and Xiang-Yang Liu, “Investigation of structure and composition control over active dissolution of Fe-Tc binary metallic waste forms by off-lattice kinetic Monte Carlo sim ulation,” Journal of Nuclear Materials, vol. 434, no. 1-3, pp. 382–388, 2013. View at Publisher · View at Google Scholar
  • Marjan Bahraminasab, B.B. Sahari, K.L. Edwards, Farzam Farahmand, and Manohar Arumugam, “Aseptic loosening of femoral components – Materials engineering and design considerations,” Materials & Design, vol. 44, pp. 155–163, 2013. View at Publisher · View at Google Scholar
  • Qihang Han, Yonglin Kang, Xianmeng Zhao, Nicole Stanford, and Minghui Cai, “Suppression of Ms temperature by carbon partitioning from carbon-supersaturated ferrite to metastable austenite during intercritical annealing,” Materials & Design, vol. 51, pp. 409–414, 2013. View at Publisher · View at Google Scholar
  • R. Sundar, Harish Kumar, R. Kaul, A. H. V. Pavan, K. Ranganathan, K. S. Bindra, S. M. Oak, L. M. Kukreja, Raghu V. Prakash, and M. Kamaraj, “Studies towards development of laser peening technology for martensitic sta inless steel and titanium alloys for steam turbine applications,” Materials Science and Engineering A-Structural Materials Properties Microst, vol. 587, pp. 352–358, 2013. View at Publisher · View at Google Scholar
  • G. İpek nakaş, Arcan F. Dericioğlu, and Şakir Bor, “Monotonic and cyclic compressive behavior of superelastic tini foams processed by sintering using magnesium space holder technique,” Materials Science and Engineering: A, 2013. View at Publisher · View at Google Scholar
  • G. Rosenberg, I. Sinaiová, and Ľ. Juhar, “Effect of microstructure on mechanical properties of dual phase steels in the presence of stress concentrators,” Materials Science and Engineering: A, vol. 582, pp. 347–358, 2013. View at Publisher · View at Google Scholar
  • A. Kumar, B. Dhakal, and S. A. Padula, “The cyclic and evolutionary response to approach the attraction loops under stress controlled isothermal conditions for a multi-mechanism based multi- axial SMA model,” Mechanics Of Materials, vol. 63, pp. 21–47, 2013. View at Publisher · View at Google Scholar
  • H.J. Willy, L.Z. Zhao, G. Wang, and Z.W. Liu, “Predictability of bulk metallic glass forming ability using the criteria based on characteristic temperatures of alloys,” Physica B: Condensed Matter, 2013. View at Publisher · View at Google Scholar
  • Gauthier Jouan, Mickael Dolle, and Jean-Philippe Monchoux, “Decoupling the effects of pressure and current in spark plasma sintering: S ynthesis of CU0.9V2O5,” Solid State Ionics, vol. 236, pp. 5–10, 2013. View at Publisher · View at Google Scholar
  • Saeed N. Ghali, “Low Carbon High Nitrogen Low Nickel Stainless Steel,” Steel Research International, vol. 84, no. 5, pp. 450–456, 2013. View at Publisher · View at Google Scholar
  • R. Padma, B. Prasanna Lakshmi, M. Siva Pratap Reddy, and V. Rajagopal Reddy, “Electrical and structural properties of Ir/Ru Schottky rectifiers on n-type InGaN at different annealing temperatures,” Superlattices and Microstructures, vol. 56, pp. 64–76, 2013. View at Publisher · View at Google Scholar
  • Asmiet Ramiy, A. S. Hussein, Z. Hassan, and F. K. Yam, “A comparative study of the structural and electrical properties of n-type I nGaN epilayer grown by MBE and commercially,” Superlattices And Microstructures, vol. 60, pp. 224–230, 2013. View at Publisher · View at Google Scholar
  • Rebecca E. McMahon, Ji Ma, Stanislav V. Verkhoturov, Dany Munoz-Pinto, Ibrahim Karaman, Felix Rubitschek, Hans J. Maier, and Mariah S. Hahn, “A comparative study of the cytotoxicity and corrosion resistance of nickel–titanium and titanium–niobium shape memory alloys,” Acta Biomaterialia, vol. 8, no. 7, pp. 2863–2870, 2012. View at Publisher · View at Google Scholar
  • Linda Ansone, Linda Eglite, and Maris Klavins, “Removal Of Arsenic Compounds With Peat, Peat-Based And Synthetic Sorbents,” Ecological Chemistry and Engineering S-Chemia I Inzynieria Ekologiczna S, vol. 19, no. 4, pp. 513–531, 2012. View at Publisher · View at Google Scholar
  • Case M. van Genuchten, Susan E. A. Addy, Jasquelin Pena, and Ashok J. Gadgil, “Removing Arsenic from Synthetic Groundwater with Iron Electrocoagulation: A n Fe and As K-Edge EXAFS Study,” Environmental Science & Technology, vol. 46, no. 2, pp. 986–994, 2012. View at Publisher · View at Google Scholar
  • J. Marteau, H. Haddadi, and S. Bouvier, “Investigation of Strain Heterogeneities Between Grains in Ferritic and Ferritic-Martensitic Steels,” Experimental Mechanics, vol. 53, no. 3, pp. 427–439, 2012. View at Publisher · View at Google Scholar
  • Ryszard Rokicki, Waseem Haider, and Tadeusz Hryniewicz, “Influence of sodium hypochlorite treatment of electropolished and magnetoel ectropolished nitinol surfaces on adhesion and proliferation of MC3T3 pre-o steoblast cells,” Journal of Materials Science-Materials in Medicine, vol. 23, no. 9, pp. 2127–2139, 2012. View at Publisher · View at Google Scholar
  • Majid Tabesh, Vijay Goel, and Mohammad H. Elahinia, “Shape Memory Alloy Expandable Pedicle Screw to Enhance Fixation in Osteoporotic Bone: Primary Design and Finite Element Simulation,” Journal of Medical Devices, vol. 6, no. 3, pp. 034501, 2012. View at Publisher · View at Google Scholar
  • A. G. Rao, K. R. Ravi, B. Ramakrishnarao, V. P. Deshmukh, A. Sharma, N. Prabhu, and B. P. Kashyap, “Recrystallization Phenomena During Friction Stir Processing of Hypereutectic Aluminum-Silicon Alloy,” Metallurgical and Materials Transactions A, vol. 44, no. 3, pp. 1519–1529, 2012. View at Publisher · View at Google Scholar
  • C. Neetzel, T. Gasi, V. Ksenofontov, C. Felser, E. Ionescu, and W. Ensinger, “Electroless synthesis of lepidocrocite (γ-FeOOH) nanotubes in ion track etched polycarbonate templates,” Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 282, pp. 96–99, 2012. View at Publisher · View at Google Scholar
  • D.G. Eliopoulos, M. Economou-Eliopoulos, A. Apostolikas, and J.P. Golightly, “Geochemical features of nickel-laterite deposits from the Balkan Peninsula and Gordes, Turkey: The genetic and environmental significance of arsenic,” Ore Geology Reviews, vol. 48, pp. 413–427, 2012. View at Publisher · View at Google Scholar
  • V. Rajagopal Reddy, R. Padma, M. Siva Pratap Reddy, and C.-J. Choi, “Annealing effects on electrical, structural, and surface morphological properties of Ir/n-InGaN Schottky structures,” physica status solidi (a), vol. 209, no. 10, pp. 2027–2033, 2012. View at Publisher · View at Google Scholar
  • Jing-yuan Li, Jian-xin Xie, Jun-bing Jin, and Zhi-xiang Wang, “Microstructural evolution of AZ91 magnesium alloy during extrusion and heat treatment,” Transactions of Nonferrous Metals Society of China, vol. 22, no. 5, pp. 1028–1034, 2012. View at Publisher · View at Google Scholar
  • H. Jabbar, J. -P. Monchoux, M. Thomas, and A. Couret, “Microstructures and deformation mechanisms of a G4 TiAl alloy produced by s park plasma sintering,” Acta Materialia, vol. 59, no. 20, pp. 7574–7585, 2011. View at Publisher · View at Google Scholar
  • Houria Jabbar, Alain Couret, Lise Durand, and Jean-Philippe Monchoux, “Identification of microstructural mechanisms during densification of a TiAl alloy by spark plasma sintering,” Journal of Alloys and Compounds, vol. 509, no. 41, pp. 9826–9835, 2011. View at Publisher · View at Google Scholar
  • G. Laplanche, P. Gadaud, J. Bonneville, A. Joulain, V. Gauthier-Brunet, S. Dubois, and F. Jay, “Spark plasma sintering synthesis and mechanical spectroscopy of the ω-Al0.7Cu0.2Fe0.1 phase,” Journal of Materials Science, vol. 47, no. 1, pp. 169–175, 2011. View at Publisher · View at Google Scholar
  • Jean-Philippe Monchoux, Mickael Dolle, Patrick Rozier, and Jean Galy, “Reaction kinetics during synthesis of CuxV2O5 and AgyV2O5 by spark plasma s intering,” Solid State Ionics, vol. 182, no. 1, pp. 24–31, 2011. View at Publisher · View at Google Scholar