Research Article
Porosity Analysis of Plasma Sprayed Coating by Application of Soft Computing
Table 1
Experimental operating parameters used during plasma spraying of fly ash + quartz + ilmenite.
| Operating parameters | values |
| Plasma arc current (Amp) | 270, 300, 400 and 420 | Arc voltage (volt) | 40, 45 and 50 | Torch input power (KW) | 11, 15, 18 and 21 | Plasma gas (argon) flow rate (IPM) | 28 | Secondary gas (N2) flow rate (IPM) | 3 | Carrier gas (Ar) flow rate (IPM) | 12 | Powder feed rate (gm/min) | 12, 15 and 18 | Powder size (µm) | 40, 60, 80 and 100 | Torch-to-base distance (TBD) (mm) | 100 |
|
|