About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [169 citations: 1–100 of 167 articles]

Articles published in Journal of Materials have been cited 169 times. The following is a list of the 167 articles that have cited the articles published in Journal of Materials.

  • E. Koepf, W. Villasmil, and A. Meier, “Pilot-scale solar reactor operation and characterization for fuel production via the Zn/ZnO thermochemical cycle,” Applied Energy, vol. 165, pp. 1004–1023, 2016. View at Publisher · View at Google Scholar
  • G.M. Kim, Faizan Naeem, H.K. Kim, and H.K. Lee, “Heating and heat-dependent mechanical characteristics of CNT-embedded cementitious composites,” Composite Structures, vol. 136, pp. 162–170, 2016. View at Publisher · View at Google Scholar
  • Dost Muhammad Khan, Ayesha Kausar, and Syed M. Salman, “Fabrication and Characterization of Polyvinyl Chloride/ Poly(Styrene-Co-Maleic Anhydride) Intercalated Functional Nanobifiller-Based Composite Paper,” International Journal of Polymer Analysis and Characterization, 2016. View at Publisher · View at Google Scholar
  • Gwo-Ji Sheen, Shih-Yen Wang, and Yingchieh Yeh, “The impact of the distance-dependent promotional effect on the promotion cost sharing decision,” International Journal Of Systems Science, vol. 47, no. 3, pp. 544–560, 2016. View at Publisher · View at Google Scholar
  • H. R. Bakhsheshi-Rad, E. Hamzah, A. F. Ismail, M. Daroonparvar, M. A. M. Yajid, and M. Medraj, “Preparation and characterization of NiCrAlY/nano-YSZ/PCL composite coatings obtained by combination of atmospheric plasma spraying and dip coating on ,” Journal Of Alloys And Compounds, vol. 658, pp. 440–452, 2016. View at Publisher · View at Google Scholar
  • Yangyang Cheng, Shujie Pang, Chen Chen, and Tao Zhang, “Size-dependent enhancement of plasticity by laser surface melting in Zr55Al10Ni5Cu30 bulk metallic glass,” Journal Of Alloys And Compounds, vol. 658, pp. 49–54, 2016. View at Publisher · View at Google Scholar
  • Abu Shaid, Lijing Wang, and Rajiv Padhye, “The thermal protection and comfort properties of aerogel and PCM-coated fabric for firefighter garment,” Journal Of Industrial Textiles, vol. 45, no. 4, pp. 611–625, 2016. View at Publisher · View at Google Scholar
  • Md. D. Rahaman, Md. Dalim Mia, M.N.I. Khan, and A.K.M. Akther Hossain, “Study the effect of sintering temperature on structural, microstructural and electromagnetic properties of 10% Ca-doped Mn0.6Zn0.4Fe2O4,” Journal of Magnetism and Magnetic Materials, vol. 404, pp. 238–249, 2016. View at Publisher · View at Google Scholar
  • Yahya Mahmoodkhani, and Mary A. Wells, “Co-Extrusion Process to Produce Al–Mg Eutectic Clad Magnesium Products at Elevated Temperatures,” Journal of Materials Processing Technology, 2016. View at Publisher · View at Google Scholar
  • S. Chackrabarti, R. A. Zargar, A. Aziz, and A. K. Hafiz, “Structural and optical characteristics of transparent conducting yttrium doped ZnO films using screen printing technology,” Journal of Materials Science: Materials in Electronics, 2016. View at Publisher · View at Google Scholar
  • Salah M. Tawfik, and Nabel A. Negm, “Synthesis, characterization and evaluation of some anionic surfactants with phosphate group as a biodegradable corrosion inhibitor for carbon steel in acidic solution,” Journal of Molecular Liquids, vol. 215, pp. 185–196, 2016. View at Publisher · View at Google Scholar
  • Sansan Shuai, Enyu Guo, Qiwei Zheng, Mingyue Wang, and Tao Jing, “Characterisation of three-dimensional dendritic morphology and orientation selection of α-Mg in Mg–Ca alloy using synchrotron X-ray tomography,” Materials Characterization, vol. 111, pp. 170–176, 2016. View at Publisher · View at Google Scholar
  • Lubomír Pavelek, Vít Ladányi, Marek Nečas, Silvie Vallová, and Kamil Wichterle, “Dioxouranium complexes with pentadentate s-triazine Schiff base ligands: synthesis, crystal structure and optical properties,” Polyhedron, 2016. View at Publisher · View at Google Scholar
  • Hemlata Chhabra, Rucha Deshpande, Meghana Kanitkar, Amit Jaiswal, Vaijayanti P. Kale, and Jayesh R. Bellare, “A nano zinc oxide doped electrospun scaffold improves wound healing in a rodent model,” RSC Adv., vol. 6, no. 2, pp. 1428–1439, 2016. View at Publisher · View at Google Scholar
  • Wei Zhang, Andrew J. Bodey, Tan Sui, Winfried Kockelmann, Christoph Rau, Alexander M. Korsunsky, and Jiawei Mi, “Multi-scale Characterisation of the 3D Microstructure of a Thermally-Shocked Bulk Metallic Glass Matrix Composite,” Scientific Reports, vol. 6, pp. 18545, 2016. View at Publisher · View at Google Scholar
  • Yongwei Wang, Mo Li, and Jinwu Xu, “Toughen and harden metallic glass through designing statistical heterogeneity,” Scripta Materialia, vol. 113, pp. 10–13, 2016. View at Publisher · View at Google Scholar
  • Hyun-Cheol Kim, Hakseong Kim, Jae-Ung Lee, Han-Byeol Lee, Doo-Hua Choi, Jun-Ho Lee, Wi Hyoung Lee, Sung Ho Jhang, Bae Ho Park, Hyeonsik Cheong, Sang-Wook Lee, and Hyun-Jong Chung, “ Engineering Optical and Electronic Properties of WS 2 by Varying the Number of Layers ,” ACS Nano, pp. 150710101440008, 2015. View at Publisher · View at Google Scholar
  • Junheng Gao, Joanne Sharp, Dikai Guan, W. Mark Rainforth, and Lain Todd, “New compositional design for creating tough metallic glass composites with excellent work hardening,” Acta Materialia, vol. 86, pp. 208–215, 2015. View at Publisher · View at Google Scholar
  • I. Kaban, P. Jovari, B. Escher, D. T. Tran, G. Svensson, M. A. Webb, T. Z. Regier, V. Kokotin, B. Beuneu, T. Gemming, and J. Eckert, “Atomic structure and formation of CuZrAl bulk metallic glasses and composites,” Acta Materialia, vol. 100, pp. 369–376, 2015. View at Publisher · View at Google Scholar
  • Douglas C. Hofmann, Scott N. Roberts, and Henry Kozachkov, “Infrared thermal processing history of a Ti-based bulk metallic glass matrix composite manufactured via semi-solid forging,” Acta Materialia, vol. 95, pp. 192–200, 2015. View at Publisher · View at Google Scholar
  • V. Azeezaa, A.J. Arul Pragasam, T.G. Sunitha, P. Koteeswari, and S. Suresh, “Growth and Characterization of Non-Linear Optical Single Crystal: L-cysteine Hydrochloride Monohydrate,” Acta Physica Polonica A, vol. 128, no. 2, pp. 423–431, 2015. View at Publisher · View at Google Scholar
  • Gustavo Doubek, Ryan C. Sekol, Jinyang Li, Won-Hee Ryu, Forrest S. Gittleson, Siamak Nejati, Eric Moy, Candy Reid, Marcelo Carmo, Marcelo Linardi, Punnathat Bordeenithikasem, Emily Kinser, Yanhui Liu, Xiao Tong, Chinedum O. Osuji, Jan Schroers, Sundeep Mukherjee, and André D. Taylor, “Guided Evolution of Bulk Metallic Glass Nanostructures: A Platform for Designing 3D Electrocatalytic Surfaces,” Advanced Materials, 2015. View at Publisher · View at Google Scholar
  • Bassam Hajj, Stephane Melanson, Jean Desforges, Serge Gauvin, Dominique Chauvat, and Joseph Zyss, “Performance and Quality Characterization of the Reference MNA Nonlinear Optical Molecular Crystal by Pockels Electrooptic Confocal Microscopy,” Advanced Optical Materials, 2015. View at Publisher · View at Google Scholar
  • Ismat Zerin Luna, Krishna Chandra Dam, A. M. Sarwaruddin Chowdhury, Md. Abdul Gafur, Nuruzzaman Khan, and Ruhul A. Khan, “Physical and Thermal Characterization of Alkali Treated Rice Husk Reinforced Polypropylene Composites,” Advances in Materials Science and Engineering, vol. 2015, pp. 1–7, 2015. View at Publisher · View at Google Scholar
  • Rodica-Cristina Voicu, Raluca Gavrila, Alexandru Cosmin Obreja, Angela-Mihaela Baracu, Adrian Dinescu, and Raluca Mueller, “Design, microfabrication and analysis of polysilicon thin layers for MEMS vibrating structures,” Analog Integrated Circuits And Signal Processing, vol. 82, no. 3, pp. 611–620, 2015. View at Publisher · View at Google Scholar
  • T. Koziel, “Estimation Of Cooling Rates In Suction Casting And Copper-Mould Casting Processes,” Archives Of Metallurgy And Materials, vol. 60, no. 2, pp. 767–771, 2015. View at Publisher · View at Google Scholar
  • Jaewoong Yoon, Wonju Jo, Dayeong Jeong, Junho Kim, Hwapyeong Jeong, and Jaesung Park, “Generation of nanovesicles with sliced cellular membrane fragments for exogenous material delivery,” Biomaterials, vol. 59, pp. 12–20, 2015. View at Publisher · View at Google Scholar
  • Andréa Bercini Martins, and Ruth Marlene Campomanes Santana, “Effect of Carboxylic Acids as Compatibilizer Agent on Mechanical Properties of Thermoplastic Starch and Polypropylene Blends,” Carbohydrate Polymers, 2015. View at Publisher · View at Google Scholar
  • Saviour A. Umoren, and Ubong M. Eduok, “Application of carbohydrate polymers as corrosion inhibitors for metal substrates in different media: A review,” Carbohydrate Polymers, 2015. View at Publisher · View at Google Scholar
  • Dimitrios G. Papageorgiou, Ian A. Kinloch, and Robert J. Young, “Graphene/elastomer nanocomposites,” Carbon, vol. 95, pp. 460–484, 2015. View at Publisher · View at Google Scholar
  • Jun Sae Han, Kwang Hyun Chung, Ravi Bollina, Kyungseop Kim, Cheeyoung Joh, Hee Seon Seo, and Seong Jin Park, “Study of Sintering Behavior of PAN-PZT using Dilatometry and Co-relation with Piezoelectric Properties,” Ceramics International, 2015. View at Publisher · View at Google Scholar
  • S. Asghar Khayatian, Ahmad Kompany, Nasser Shahtahmassebi, and A. Khorsand Zak, “Preparation and characterization of Al doped ZnO NPs/graphene nanocomposites synthesized by a facile one-step solvothermal method,” Ceramics International, 2015. View at Publisher · View at Google Scholar
  • Wanli Jiang, Dehui Xu, Bin Xiong, and Yuelin Wang, “Effects of rapid thermal annealing on LPCVD silicon nitride,” Ceramics International, 2015. View at Publisher · View at Google Scholar
  • Eleonora Santecchia, Erfan Zalnezhad, A.M.S. Hamouda, Farayi Musharavati, Marcello Cabibbo, and Stefano Spigarelli, “Wear resistance investigation of titanium nitride-based coatings,” Ceramics International, 2015. View at Publisher · View at Google Scholar
  • M. Vojnović, M. Popović, M.M. Ristić, M.D. Vićić, and G.B. Poparić, “Rate coefficients for electron impact excitation of N2,” Chemical Physics, 2015. View at Publisher · View at Google Scholar
  • Longhua Tang, Ying Wang, and Jinghong Li, “The graphene/nucleic acid nanobiointerface,” Chemical Society Reviews, vol. 44, no. 19, pp. 6954–6980, 2015. View at Publisher · View at Google Scholar
  • Ravi Shrivastava, and Jagjeet Kaur, “Studies on long lasting optical properties of Eu2+ and Dy3+ doped di-barium magnesium silicate phosphors,” Chinese Chemical Letters, vol. 26, no. 9, pp. 1187–1190, 2015. View at Publisher · View at Google Scholar
  • H. Kakati, and S. M. Borah, “Study of hysteresis behavior in reactive sputtering of cylindrical magnetron plasma,” Chinese Physics B, vol. 24, no. 12, 2015. View at Publisher · View at Google Scholar
  • J.C. Outeiro, S. Campocasso, L.A. Denguir, G. Fromentin, V. Vignal, and G. Poulachon, “Experimental and numerical assessment of subsurface plastic deformation induced by OFHC copper machining,” CIRP Annals - Manufacturing Technology, 2015. View at Publisher · View at Google Scholar
  • Hassan Waqas, Muhammad Saad Salman, Asim Riaz, Naeem Riaz, and Saima Shabbir, “Unique morphologies of zinc oxide synthesized by thermal decomposition and co-precipitation routes: Ultraviolet absorption and luminescence characteri,” Crystal Research And Technology, vol. 50, no. 5, pp. 379–388, 2015. View at Publisher · View at Google Scholar
  • Ishwar Prasad Sahu, D. P. Bisen, and Nameeta Brahme, “Structural characterization and optical properties of dysprosium doped strontium calcium magnesium di-silicate phosphor by solid state reaction method,” Displays, vol. 38, pp. 68–76, 2015. View at Publisher · View at Google Scholar
  • Elena A. Erofeeva, “Dependence of Guaiacol Peroxidase Activity and Lipid Peroxidation Rate in Drooping Birch (Betula pendula Roth) and Tillet (Tilia cordata Mill) Leaf on,” Dose-Response, vol. 13, no. 2, 2015. View at Publisher · View at Google Scholar
  • Dinsefa M. Andoshe, Jong-Myeong Jeon, Soo Young Kim, and Ho Won Jang, “Two-Dimensional Transition Metal Dichalcogenide Nanomaterials for Solar Water Splitting,” Electronic Materials Letters, vol. 11, no. 3, pp. 323–335, 2015. View at Publisher · View at Google Scholar
  • Takeshi Ihara, Bjørn Petter Jelle, Tao Gao, and Arild Gustavsen, “Aerogel granule aging driven by moisture and solar radiation,” Energy and Buildings, 2015. View at Publisher · View at Google Scholar
  • Vinay Kumar Patel, and Anil Dhanola, “Influence of CaCO3, Al2O3, and TiO2 microfillers on physico-mechanical properties of Luffa cylindrica/polyester composites,” Engineering Science and Technology, an International Journal, 2015. View at Publisher · View at Google Scholar
  • Alan Paterson, Ralf Bauer, Li Li, Walter Lubeigt, and Deepak Uttamchandani, “Range Extension of a Bimorph Varifocal Micromirror Through Actuation by a Peltier Element,” Ieee Journal Of Selected Topics In Quantum Electronics, vol. 21, no. 4, 2015. View at Publisher · View at Google Scholar
  • Rajesh Parmar, J. Hooda, R. S. Kundu, R. Punia, and N. Kishore, “Optical Characterization of Zinc Modified Bismuth Silicate Glasses,” International Journal of Optics, vol. 2015, pp. 1–9, 2015. View at Publisher · View at Google Scholar
  • Almut M. Schwenke, Stephanie Hoeppener, and Ulrich S. Schubert, “Microwave synthesis of carbon nanofibers – the influence of MW irradiation power, time, and the amount of catalyst,” J. Mater. Chem. A, vol. 3, no. 47, pp. 23778–23787, 2015. View at Publisher · View at Google Scholar
  • Jianglei Fan, Jianxiu Liu, Shuxia Tian, Shen Wu, Shengyong Wang, Hongxia Gao, Jingjie Guo, Xiao Wang, Yanqing Su, and Hengzhi Fu, “Effect of solidification parameters on microstructural characteristics and mechanical properties of directionally solidified binary TiAl alloy,” Journal of Alloys and Compounds, 2015. View at Publisher · View at Google Scholar
  • Debojyoti Mukherjee, B. D. Sahoo, K. D. Joshi, and Satish C. Gupta, “High pressure phase transition in Zr-Ni binary system: A first principle study,” Journal Of Alloys And Compounds, vol. 648, pp. 951–957, 2015. View at Publisher · View at Google Scholar
  • Aamir Razaq, M. H. Asif, Riffat Kalsoom, Ather Farooq Khan, M. S. Awan, S. Ishrat, and Shahid M. Ramay, “Conductive and electroactive composite paper reinforced by coating of polyaniline on lignocelluloses fibers,” Journal of Applied Polymer Science, 2015. View at Publisher · View at Google Scholar
  • Mitsuhiro Shibata, Kazuki Satoh, and Shouta Ehara, “Thermosetting bismaleimide resins generating covalent and multiple hydrogen bonds,” Journal of Applied Polymer Science, 2015. View at Publisher · View at Google Scholar
  • Rashmi Gupta, Seema Verma, Vishal Singh, and K. K. Bamzai, “Preparation, Structural, Electrical, and Ferroelectric Properties of Lead Niobate–Lead Zirconate–Lead Titanate Ternary System,” Journal of Ceramics, vol. 2015, pp. 1–12, 2015. View at Publisher · View at Google Scholar
  • Tajamal Hussain, Mira Tul Zubaida Butt, Mirza Nadeem Ahmed, Muhammad Hamid Raza, Zahoor Hussain Farooqi, Khurram Shehzad, Adnan Mujahid, and Rabia Batool, “Fabrication of Ag and Ni Nanocatalyst with Enhanced Efficiency,” Journal of Chemistry, vol. 2015, pp. 1–4, 2015. View at Publisher · View at Google Scholar
  • Zhiwen Chen, Changqing Liu, Yiping Wu, Bing An, and Longzao Zhou, “Study of Height Reduction of Sn99Cu1/Cu Solder Joints as a Result of Isothermal Aging,” Journal Of Electronic Materials, vol. 44, no. 11, pp. 4058–4064, 2015. View at Publisher · View at Google Scholar
  • Prashant Savvashe, Pravin Kadam, and Shashank Mhaske, “Effect of nano-alumina concentration on the mechanical, rheological, barrier and morphological properties of guar gum,” Journal of Food Science and Technology, 2015. View at Publisher · View at Google Scholar
  • Ashraf S. Elkady, Shaban I. Hussein, and Mohamed M. Rashad, “Structural and magnetic properties of Gd3+ ion substituted magnesium ferrite nanopowders,” Journal Of Magnetism And Magnetic Materials, vol. 385, pp. 70–76, 2015. View at Publisher · View at Google Scholar
  • Yong Lian, Jinfeng Huang, Jin Zhang, Cheng Zhang, Wen Gao, and Chao Zhao, “Effect of 0.2 and 0.5% Ti on the microstructure and mechanical properties of 13Cr supermartensitic stainless steel,” Journal Of Materials Engineering And Performance, vol. 24, no. 11, pp. 4253–4259, 2015. View at Publisher · View at Google Scholar
  • A. Pimentel, J. Rodrigues, P. Duarte, D. Nunes, F. M. Costa, T. Monteiro, R. Martins, and E. Fortunato, “Effect of solvents on ZnO nanostructures synthesized by solvothermal method assisted by microwave radiation: a photocatalytic study,” Journal of Materials Science, 2015. View at Publisher · View at Google Scholar
  • Meenakshi Dult, R.S. Kundu, Neelam Berwal, R. Punia, and N. Kishore, “Manganese Modified Structural and Optical Properties of Bismuth Silicate Glasses,” Journal of Molecular Structure, 2015. View at Publisher · View at Google Scholar
  • Claudia S. Herdocia-Lluberes, Simara Laboy-López, Stefannie Morales, Tania J. Gonzalez-Robles, José A. González-Feliciano, and Eduardo Nicolau, “Evaluation of Synthesized Nanohydroxyapatite-Nanocellulose Composites as Biocompatible Scaffolds for Applications in Bone Tissue Engineering,” Journal of Nanomaterials, vol. 2015, pp. 1–9, 2015. View at Publisher · View at Google Scholar
  • J. A. Adekoya, E. O. Dare, M. A. Mesubi, and N. Revaprasadu, “Polyol mediated hexadecylamine capped silver allied nanobimetallic particles and their fluxional properties,” Journal Of Physics And Chemistry Of Solids, vol. 86, pp. 155–161, 2015. View at Publisher · View at Google Scholar
  • K. Agilandeswari, and A. Ruban Kumar, “Investigation of magnetic, optical and electrical properties of La3Ba3Cu6O14 synthesized by molten flux method,” Journal of Rare Earths, vol. 33, no. 12, pp. 1341–1347, 2015. View at Publisher · View at Google Scholar
  • Christian Reus, Monika Stolar, Jeffrey Vanderkley, Johannes Nebauer, and Thomas Baumgartner, “ A Convenient N -Arylation Route for Electron-Deficient Pyridines: The Case of π-Extended Electrochromic Phosphaviologens ,” Journal of the American Chemical Society, pp. 150901124000005, 2015. View at Publisher · View at Google Scholar
  • Vidka V. Divarova, Kirila T. Stojnova, Petya V. Racheva, Vanya D. Lekova, and Atanas N. Dimitrov, “Liquid-liquid extraction of ion-association complexes of cobalt(II)-4-(2-pyridylazo)resorcinol with ditetrazolium salts,” Journal Of The Serbian Chemical Society, vol. 80, no. 2, pp. 179–186, 2015. View at Publisher · View at Google Scholar
  • Anant Vidya Nidhi, Vivek Modgil, and V. S. Rangra, “Effect of Sb substitution on thermal behaviour of Te–Se–Ge glassy system,” Journal of Thermal Analysis and Calorimetry, 2015. View at Publisher · View at Google Scholar
  • Heriberto Rodríguez-Tobías, Graciela Morales, Amelia Olivas, and Daniel Grande, “ One-Pot Formation of ZnO- graft -Poly( d , l -Lactide) Hybrid Systems via Microwave-Assisted Polymerization of d , l -Lactide in the Presence of ZnO Nanoparticles ,” Macromolecular Chemistry and Physics, 2015. View at Publisher · View at Google Scholar
  • D. I. Adebiyi, and A. P. I. Popoola, “Mitigation of abrasive wear damage of Ti-6Al-4V by laser surface alloying,” Materials & Design, vol. 74, pp. 67–75, 2015. View at Publisher · View at Google Scholar
  • Kai-Chieh Wu, Jien-Wei Yeh, and Shou-Yi Chang, “Refined microstructure and improved mechanical properties of high-ratio extruded AZ91-xSn magnesium alloy,” Materials Chemistry And Physics, vol. 162, pp. 757–763, 2015. View at Publisher · View at Google Scholar
  • Natarajan Nithya, Raman Mahalakshmi, and Suresh Sagadevan, “Investigation on Physical Properties of Semiorganic Nonlinear Optical Glycine Zinc Sulfate Single Crystal,” Materials Research-Ibero-American Journal Of Materials, vol. 18, no. 3, pp. 581–587, 2015. View at Publisher · View at Google Scholar
  • M. R. Akbarpour, M. Farvizi, D. J. Lee, H. Rezaei, and H. S. Kim, “Effect of high-pressure torsion on the microstructure and strengthening mechanisms of hot-consolidated Cu-CNT nanocomposite,” Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, vol. 638, pp. 289–295, 2015. View at Publisher · View at Google Scholar
  • Y. H. Sun, “Inverse ductile-brittle transition in metallic glasses?,” Materials Science And Technology, vol. 31, no. 6, pp. 635–650, 2015. View at Publisher · View at Google Scholar
  • C.R. García, L.A. Diaz-Torres, P. Salas, M. Guzman, and C. Angeles-Chavez, “Photoluminescent and photocatalytic properties of bismuth doped strontium aluminates blended with titanium dioxide,” Materials Science in Semiconductor Processing, 2015. View at Publisher · View at Google Scholar
  • Wanli Jiang, Dehui Xu, Shaokang Yao, Bin Xiong, and Yuelin Wang, “Effect of hyperthermal annealing on LPCVD silicon nitride,” Materials Science in Semiconductor Processing, 2015. View at Publisher · View at Google Scholar
  • Naoki Nitta, Feixiang Wu, Jung Tae Lee, and Gleb Yushin, “Li-ion battery materials: present and future,” Materials Today, vol. 18, no. 5, pp. 252–264, 2015. View at Publisher · View at Google Scholar
  • Mohammad Mezbahul-Islam, Dmytro Kevorkov, and Mamoun Medraj, “Experimental Study of the Mg-Ni-Y System at 673 K Using Diffusion Couples and Key Alloys,” Metals, vol. 5, no. 3, pp. 1746–1769, 2015. View at Publisher · View at Google Scholar
  • Ahmad Mostafa, and Mamoun Medraj, “Experimental Investigation of the Mg-Nd-Zn Isothermal Section at 300 degrees C,” Metals, vol. 5, no. 1, pp. 84–101, 2015. View at Publisher · View at Google Scholar
  • Lisa Kraemer, Karoline S. Kormout, Daria Setman, Yannick Champion, and Reinhard Pippan, “Production of Bulk Metallic Glasses by Severe Plastic Deformation,” Metals, vol. 5, no. 2, pp. 720–729, 2015. View at Publisher · View at Google Scholar
  • Z. Wu, M. F. Francis, and W. A. Curtin, “Magnesium interatomic potential for simulating plasticity and fracture phenomena,” Modelling And Simulation In Materials Science And Engineering, vol. 23, no. 1, 2015. View at Publisher · View at Google Scholar
  • Kirila T. Stojnova, Vidka V. Divarova, Petya V. Racheva, Georgi D. Daskalov, and Vanya D. Lekova, “Complex formation and liquid–liquid extraction of anionic chelate of cobalt(II)-4-(2-thiazolylazo)resorcinol with 1,4-diphenyl-3-(phenylamino)-1H-1,2,4-triazole,” Monatshefte für Chemie - Chemical Monthly, 2015. View at Publisher · View at Google Scholar
  • Douglas C Hofmann, and Scott N Roberts, “Microgravity metal processing: from undercooled liquids to bulk metallic glasses,” npj Microgravity, vol. 1, pp. 15003, 2015. View at Publisher · View at Google Scholar
  • Xunlei Zhang, Surong Fang, Yan Tan, Haijun Yan, Wei Gu, Jianhong Wang, and Zhenhua Yang, “Increased risk of developing lung cancer in Asian patients carrying the TERT rs2736098 G > A polymorphism: evidence from 3,354 cases and 3,518 control,” Oncotargets And Therapy, vol. 8, pp. 2757–2765, 2015. View at Publisher · View at Google Scholar
  • Hafsat R. Saliu, U. S. Ishiaku, M. K. Yakubu, E. G. Kolawole, S. S. Adefila, M. B. Abu Bakar, and Z. A. Moh’d Ishak, “The Effect of Epoxy Concentration and Fibre Loading on the Mechanical Properties of ABS/Epoxy-Coated Kenaf Fibre Composites,” Open Journal of Composite Materials, vol. 05, no. 02, pp. 41–48, 2015. View at Publisher · View at Google Scholar
  • Mehdi Khalili, “DCT-Arnold chaotic based watermarking using JPEG-YCbCr,” Optik, vol. 126, no. 23, pp. 4367–4371, 2015. View at Publisher · View at Google Scholar
  • R.N. Jayaprakash, and P. Sundaramoorthi, “Growth and characterization of l-alanine admixtured urea single crystal,” Optik - International Journal for Light and Electron Optics, vol. 126, no. 23, pp. 3570–3573, 2015. View at Publisher · View at Google Scholar
  • K. Sathesh Kumar, P. Srinivasan, and S. Sudhahar, “Effect of rare earth Nd+ ion on the growth, structural, spectral, optical and mechanical properties of piperidinium p-hydroxybenzoate single crystals,” Optik - International Journal for Light and Electron Optics, 2015. View at Publisher · View at Google Scholar
  • Jason De Melo, and Damu Tang, “Elevation of SIPL1 (SHARPIN) Increases Breast Cancer Risk,” Plos One, vol. 10, no. 5, 2015. View at Publisher · View at Google Scholar
  • Siva Bhaskara Rao Devireddy, and Sandhyarani Biswas, “Physical and mechanical behavior of unidirectional banana/jute fiber reinforced epoxy based hybrid composites,” Polymer Composites, 2015. View at Publisher · View at Google Scholar
  • C. Stenson, M.C. Meyer, B. Twomey, and R. Lupoi, “Particle Speed Analysis in CoBlast,” Procedia CIRP, vol. 37, pp. 77–82, 2015. View at Publisher · View at Google Scholar
  • Eleni Tsangouri, Dimitris Aggelis, and Danny Van Hemelrijck, “Quantifying thermoset polymers healing efficiency: A systematic review of mechanical testing,” Progress In Polymer Science, vol. 49-50, pp. 154–174, 2015. View at Publisher · View at Google Scholar
  • V. Divarova, K. Stojnova, P. Racheva, and V. Lekova, “Study on the complex formation of anionic chelates of Co(II)-4-(2-thiazolylazo)resorcinol with ditetrazolium cations,” Russian Journal Of Inorganic Chemistry, vol. 60, no. 11, pp. 1374–1379, 2015. View at Publisher · View at Google Scholar
  • A. T. Baryshnikova, B. F. Minaev, G. V. Baryshnikov, and Wen-Hua Sun, “Structure and spectral and luminescence properties of the trinuclear zinc complex with (E)-5-((2,6-diethylphenylimino)methyl)-2-methylquinolin-8-ol: E,” Russian Journal Of Inorganic Chemistry, vol. 60, no. 12, pp. 1560–1567, 2015. View at Publisher · View at Google Scholar
  • Lei Wang, Johannes S. Roth, Xiaojun Han, and Stephen D. Evans, “Photosynthetic Proteins in Supported Lipid Bilayers: Towards a Biokleptic Approach for Energy Capture,” Small, vol. 11, no. 27, pp. 3306–3318, 2015. View at Publisher · View at Google Scholar
  • Philip Hülsmann, and Karl-Anders Weiss, “Simulation of water ingress into PV-modules: IEC-testing versus outdoor exposure,” Solar Energy, vol. 115, pp. 347–353, 2015. View at Publisher · View at Google Scholar
  • J. B. Prasanna Kumar, G. Ramgopal, Y. S. Vidya, K. S. Anantharaju, B. Daruka Prasad, S. C. Sharma, S. C. Prashantha, H. P. Nagaswarupa, D. Kavyashree, and H. Nagabhushana, “Green synthesis of Y2O3:Dy3+ nanophosphor with enhanced photocatalytic activity,” Spectrochimica Acta Part A-Molecular And Biomolecular Spectroscopy, vol. 149, pp. 687–697, 2015. View at Publisher · View at Google Scholar
  • M. A. Mulero, J. Zapata, R. Vilar, V. Martinez, and R. Gadow, “Automated image inspection system to quantify thermal spray splat morphology,” Surface & Coatings Technology, vol. 278, pp. 1–11, 2015. View at Publisher · View at Google Scholar
  • Hejie Yang, Yimin Gao, Weichao Qin, and Yefei Li, “Microstructure and corrosion behavior of electroless Ni–P on sprayed Al–Ce coating of 3003 aluminum alloy,” Surface and Coatings Technology, 2015. View at Publisher · View at Google Scholar
  • Qin Yu, Jian Wang, Yanyao Jiang, Rodney J. McCabe, Nan Li, and Carlos N. Tome, “Twin-twin interactions in magnesium,” Acta Materialia, vol. 77, pp. 28–42, 2014. View at Publisher · View at Google Scholar
  • K. Agilandeswari, and A. Ruban Kumar, “Optical, electrical properties, characterization and synthesis of Ca2Co2O5 by sucrose assisted sol gel combustion method,” Advanced Powder Technology, vol. 25, no. 3, pp. 904–909, 2014. View at Publisher · View at Google Scholar
  • M. Saeedi Heydari, S. M. Mirkazemi, and S. Abbasi, “Influence of Co3O4, Fe2O3 and SiC on microstructure and properties of glass foam from waste cathode ray tube display panel (CRT),” Advances in Applied Ceramics, vol. 113, no. 4, pp. 234–239, 2014. View at Publisher · View at Google Scholar