- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Reviewers Acknowledgment
- Submit a Manuscript
- Subscription Information
- Table of Contents
Journal of Medical Engineering
Volume 2013 (2013), Article ID 265412, 9 pages
http://dx.doi.org/10.1155/2013/265412
Micromotion of Dental Implants: Basic Mechanical Considerations
1Department of Mechanical Engineering, University of Erlangen-Nuremberg, Egerlandstraße 5, 91058 Erlangen, Germany
2Department of Prosthodontics, University of Erlangen-Nuremberg, Glueckstraße 11, 91054 Erlangen, Germany
Received 13 August 2012; Accepted 23 September 2012
Academic Editor: Raju Adhikari
Copyright © 2013 Werner Winter et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
Werner Winter, Daniel Klein, and Matthias Karl, “Micromotion of Dental Implants: Basic Mechanical Considerations,” Journal of Medical Engineering, vol. 2013, Article ID 265412, 9 pages, 2013. doi:10.1155/2013/265412