About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [40 citations: 36 articles]

Articles published in Journal of Medical Engineering have been cited 40 times. The following is a list of the 36 articles that have cited the articles published in Journal of Medical Engineering.

  • Daniel Kluess, Erwin Steinhauser, Micheal Joseph, Ursula Koch, Martin Ellenrieder, Wolfram Mittelmeier, and Rainer Bader, “Laser engravings as reason for mechanical failure of titanium-alloyed total hip stems,” Archives of Orthopaedic and Trauma Surgery, 2015. View at Publisher · View at Google Scholar
  • I Mutreja, T B F Woodfield, S Sperling, V Nock, J J Evans, and M M Alkaisi, “Positive and negative bioimprinted polymeric substrates: new platforms for cell culture,” Biofabrication, vol. 7, no. 2, pp. 025002, 2015. View at Publisher · View at Google Scholar
  • Aleš Procházka, Oldřich Vyšata, Martin Vališ, Ondřej Ťupa, Martin Schätz, and Vladimír Mařík, “Bayesian classification and analysis of gait disorders using image and depth sensors of Microsoft Kinect,” Digital Signal Processing, 2015. View at Publisher · View at Google Scholar
  • John Henry Rossmeisl, Rudy T. Andriani, Thomas E. Cecere, Kevin Lahmers, Tanya LeRoith, Kurt L. Zimmerman, Denise Gibo, and Waldemar Debinski, “Frame-Based Stereotactic Biopsy of Canine Brain Masses: Technique and Clinical Results in 26 Cases,” Frontiers in Veterinary Science, vol. 2, 2015. View at Publisher · View at Google Scholar
  • Jesús Chamorro-Martínez, Pedro Manuel Martínez-Jiménez, José Manuel Soto-Hidalgo, and Alejandro León Salas, “A fuzzy approach for modelling visual texture properties,” Information Sciences, 2015. View at Publisher · View at Google Scholar
  • Robert E. Dodde, Grant H. Kruger, and Albert J. Shih, “Design of Bioimpedance Spectroscopy Instrument With Compensation Techniques for Soft Tissue Characterization,” Journal Of Medical Devices-Transactions Of The Asme, vol. 9, no. 2, 2015. View at Publisher · View at Google Scholar
  • Ammar Huneiti, and Maisa Daoud, “Content-Based Image Retrieval Using SOM and DWT,” Journal of Software Engineering and Applications, vol. 08, no. 02, pp. 51–61, 2015. View at Publisher · View at Google Scholar
  • Shenghao Wang, Huajie Han, Kun Gao, Zhili Wang, Can Zhang, Meng Yang, Zhao Wu, and Ziyu Wu, “A user-friendly LabVIEW software platform for grating based X-ray phase-contrast imaging,” Journal Of X-Ray Science And Technology, vol. 23, no. 2, pp. 189–199, 2015. View at Publisher · View at Google Scholar
  • S.M. Giannitelli, F. Basoli, P. Mozetic, P. Piva, F.N. Bartuli, F. Luciani, C. Arcuri, M. Trombetta, A. Rainer, and S. Licoccia, “Graded porous polyurethane foam: a potential scaffold for oro-maxillary bone regeneration,” Materials Science and Engineering: C, 2015. View at Publisher · View at Google Scholar
  • Joshua Panfil, Maria Campana, Alec M. Block, Matthew M. Harkenrider, Murat Surucu, John C. Roeske, and Rakesh Patel, “Markerless motion tracking of lung tumors using dual-energy fluoroscopy,” Medical Physics, vol. 42, no. 1, pp. 254–262, 2015. View at Publisher · View at Google Scholar
  • Fabian Braun, Martin Proença, Michael Rapin, Mathieu Lemay, Andy Adler, Bartłomiej Grychtol, Josep Solà, and Jean-Philippe Thiran, “Aortic blood pressure measured via EIT: investigation of different measurement settings,” Physiological Measurement, vol. 36, no. 6, pp. 1147–1159, 2015. View at Publisher · View at Google Scholar
  • Katja Zdesar Kotnik, Tatjana Robic, and Petra Golja, “Which method to use for a fast assessment of body fat percentage?,” Physiological Measurement, vol. 36, no. 7, pp. 1453–1468, 2015. View at Publisher · View at Google Scholar
  • Francesco Perdisa, Natalia Gostyńska, Alice Roffi, Giuseppe Filardo, Maurilio Marcacci, and Elizaveta Kon, “Adipose-Derived Mesenchymal Stem Cells for the Treatment of Articular Cartilage: A Systematic Review on Preclinical and Clinical Evidence,” Stem Cells International, vol. 2015, pp. 1–13, 2015. View at Publisher · View at Google Scholar
  • Tsun-Kuo Lin, “An Adaptive Vision-Based Method for Automated Inspection in Manufacturing,” Advances in Mechanical Engineering, vol. 2014, pp. 1–7, 2014. View at Publisher · View at Google Scholar
  • Salim Lahmiri, and Mounir Boukadoum, “Automated detection of circinate exudates in retina digital images using empirical mode decomposition and the entropy and uniformity of the intrinsic mode functions,” Biomedical Engineering-Biomedizinische Technik, vol. 59, no. 4, pp. 357–366, 2014. View at Publisher · View at Google Scholar
  • Phuc Pham, Khanh Hong-Thien Bui, Triet Dinh Duong, Nhan Thanh Nguyen, Thanh Duc Nguyen, Vien Tuong Le, Viet Thanh Mai, Nhan Lu-Chinh Phan, Dung Minh Le, and Ngoc Kim Ngoc, “Symptomatic knee osteoarthritis treatment using autologous adipose derived stem cells and platelet-rich plasma: a clinical study,” Biomedical Research and Therapy, vol. 1, no. 1, 2014. View at Publisher · View at Google Scholar
  • Phuc Van Pham, Ngoc Bich Vu, Nhan Lu-Chinh Phan, Dung Minh Le, Nhat Chau Truong, Nhung Hai Truong, Khanh Hong-Thien Bui, and Ngoc Kim Phan, “Good manufacturing practice-compliant isolation and culture of human adipose derived stem cells,” Biomedical Research and Therapy, vol. 1, no. 4, 2014. View at Publisher · View at Google Scholar
  • Bailin Zhang, Andres W. Morales, Ralph Peterson, Liang Tang, and Jing Yong Ye, “Label-free Detection of Cardiac Troponin I with a Photonic Crystal Biosensor,” Biosensors and Bioelectronics, 2014. View at Publisher · View at Google Scholar
  • Eduardo Zapp, Eduard Westphal, Hugo Gallardo, Bernardo de Souza, and Iolanda Cruz Vieira, “Liquid crystal and gold nanoparticles applied to electrochemical immunosensor for cardiac biomarker,” Biosensors and Bioelectronics, vol. 59, pp. 127–133, 2014. View at Publisher · View at Google Scholar
  • Torsten Lowitz, Oleg Museyko, Valerie Bousson, Willi A Kalender, Jean Denis Laredo, and Klaus Engelke, “Characterization of knee osteoarthritis-related changes in trabecular bone using texture parameters at various levels of spatial resolution—a simulation study,” BoneKEy Reports, vol. 3, pp. 615, 2014. View at Publisher · View at Google Scholar
  • Beata Letkowska, Wlodzimierz Dudzinski, and Lukasz Konat, “Fatigue fracture of cutter blade made of high-speed steel,” Case Studies in Engineering Failure Analysis, 2014. View at Publisher · View at Google Scholar
  • Juraj Brozović, Nazif Demoli, Nina Farkaš, Mato Sušić, Željko Alar, and Dragana Gabrić Pandurić, “Properties of axially loaded implant–abutment assemblies using digital holographic interferometry analysis,” Dental Materials, 2014. View at Publisher · View at Google Scholar
  • Mark Taylor, and Patrick J Prendergast, “Four decades of finite element analysis of orthopaedic devices: Where are we now and what are the opportunities?,” Journal of Biomechanics, 2014. View at Publisher · View at Google Scholar
  • Tushar Kanti Bera, “Bioelectrical Impedance Methods for Noninvasive Health Monitoring: A Review,” Journal of Medical Engineering, vol. 2014, pp. 1–28, 2014. View at Publisher · View at Google Scholar
  • Tushar Kanti Bera, Parimal Maity, Sandip Haldar, and J. Nagaraju, “A MatLAB Based Virtual Phantom for 2D Electrical Impedance Tomography (MatVP2DEIT): Studying the Medical Electrical Impedance Tomography Reconstruction in Computer,” Journal of Medical Imaging and Health Informatics, vol. 4, no. 2, pp. 147–167, 2014. View at Publisher · View at Google Scholar
  • Sally K. Gallena, Nancy Pearl Solomon, Arthur T. Johnson, Jafar Vossoughi, and Wei Tian, “Test-Retest Reliability of Respiratory Resistance Measured With the Airflow Perturbation Device,” Journal Of Speech Language And Hearing Research, vol. 57, no. 4, pp. 1323–1329, 2014. View at Publisher · View at Google Scholar
  • Tushar Kanti Bera, and J. Nagaraju, “Studies on thin film based flexible gold electrode arrays for resistivity imaging in electrical impedance tomography,” Measurement, vol. 47, pp. 264–286, 2014. View at Publisher · View at Google Scholar
  • Tushar Kanti Bera, Samir Kumar Biswas, K. Rajan, and J. Nagaraju, “Projection Error Propagation-based Regularization (PEPR) method for resistivity reconstruction in Electrical Impedance Tomography (EIT),” Measurement, vol. 49, pp. 329–350, 2014. View at Publisher · View at Google Scholar
  • Sungchul Mun, and Min-Chul Park, “Affective three-dimensional brain-computer interface created using a prism array-based display,” Optical Engineering, vol. 53, no. 12, 2014. View at Publisher · View at Google Scholar
  • Hyo Seung Park, Su Yeon Lee, Hyunsik Yoon, and Insup Noh, “Biological evaluation of micro-patterned hyaluronic acid hydrogel for bone tissue engineering,” Pure And Applied Chemistry, vol. 86, no. 12, pp. 1911–1922, 2014. View at Publisher · View at Google Scholar
  • C. -H. Liu, M. N. Skryabina, J. Li, M. Singh, E. N. Sobol, and K. V. Larin, “Measurement of the temperature dependence of Young's modulus of cartilage by phase-sensitive optical coherence elastography,” Quantum Electronics, vol. 44, no. 8, pp. 751–756, 2014. View at Publisher · View at Google Scholar
  • S.M. Heckmann, and W. Winter, “Biomechanische Aspekte bei enossalen Implantaten,” wissen kompakt, vol. 8, no. 3, pp. 37–52, 2014. View at Publisher · View at Google Scholar
  • Salim Lahmiri, “Features Extraction from High Frequency Domain for Retina Digital Images Classification,” Journal of Advances in Information Technology, vol. 4, no. 4, 2013. View at Publisher · View at Google Scholar
  • Asloob Ahmad Mudassar, and Saira Butt, “Extraction of Blood Vessels in Retinal Images Using Four Different Techniques,” Journal of Medical Engineering, vol. 2013, pp. 1–21, 2013. View at Publisher · View at Google Scholar
  • William C. W. Chen, Tea Soon Park, Iain R. Murray, Ludovic Zimmerlin, Lorenza Lazzari, Johnny Huard, and Bruno Péault, “Cellular Kinetics of Perivascular MSC Precursors,” Stem Cells International, vol. 2013, pp. 1–18, 2013. View at Publisher · View at Google Scholar
  • S. Mukherjee, S. Dhara, and P. Saha, “Enhancing the biocompatibility of Ti6Al4V implants by laser surface microtexturing: an in vitro study,” The International Journal of Advanced Manufacturing Technology, vol. 76, no. 1-4, pp. 5–15, 2013. View at Publisher · View at Google Scholar