- About this Journal ·
- Abstracting and Indexing ·
- Aims and Scope ·
- Annual Issues ·
- Article Processing Charges ·
- Author Guidelines ·
- Bibliographic Information ·
- Citations to this Journal ·
- Contact Information ·
- Editorial Board ·
- Editorial Workflow ·
- Free eTOC Alerts ·
- Publication Ethics ·
- Recently Accepted Articles ·
- Reviewers Acknowledgment ·
- Submit a Manuscript ·
- Subscription Information ·
- Table of Contents
Journal of Nanomaterials
Volume 2012 (2012), Article ID 386236, 9 pages
Mechanical Behavior of Nanostructured Hybrids Based on Poly(Vinyl Alcohol)/Bioactive Glass Reinforced with Functionalized Carbon Nanotubes
1Center of Nanoscience, Nanotechnology, and Innovation (CeNano) and Department of Metallurgical and Materials Engineering, Federal University of Minas Gerais, 31270-901 Belo Horizonte, MG, Brazil
2Department of Metallurgy and Material Engineering, Centro Federal de Educação Tecnológica de Minas Gerais, Avenida Amazonas 5253, Nova Suiça, 30421-169 Belo Horizonte, MG, Brazil
Received 21 August 2012; Revised 26 October 2012; Accepted 6 November 2012
Academic Editor: Tianxi Liu
Copyright © 2012 H. S. Mansur et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Citations to this Article [2 citations]
The following is the list of published articles that have cited the current article.
- Jacob Muthu, and Casian Dendere, “Functionalised Multiwall Carbon Nanotubes Strengthened GRP Hybrid Composites:Improved Properties with Optimum Fiber Content,” Composites Part B: Engineering, 2014.
- Joyce Cristina Cruz Santos, Alexandra A. P. Mansur, Virginia S. T. Ciminelli, and Herman S. Mansur, “Nanocomposites of Poly(Vinyl Alcohol)/Functionalized-Multiwall Carbon Nanotubes Conjugated With Glucose Oxidase for Potential Application as Scaffolds in Skin Wound Healing,” International Journal of Polymeric Materials and Polymeric Biomaterials, vol. 63, no. 4, pp. 185–196, 2014.