Journal Menu
- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Annual Issues
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Reviewers Acknowledgment
- Submit a Manuscript
- Subscription Information
- Table of Contents
Journal of Nanomaterials
Volume 2012 (2012), Article ID 851753, 12 pages
doi:10.1155/2012/851753
Research Article
Analysis of Large-Strain Extrusion Machining with Different Chip Compression Ratios
School of Mechanical and Automotive Engineering, South China University of Technology, 381 Wushan Road, Tianhe District, Guangzhou 510641, China
Received 20 May 2012; Revised 12 August 2012; Accepted 12 August 2012
Academic Editor: Sheng-Rui Jian
Copyright © 2012 Wen Jun Deng et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
Wen Jun Deng, Ping Lin, Zi Chun Xie, and Qing Li, “Analysis of Large-Strain Extrusion Machining with Different Chip Compression Ratios,” Journal of Nanomaterials, vol. 2012, Article ID 851753, 12 pages, 2012. doi:10.1155/2012/851753