- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Annual Issues
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Reviewers Acknowledgment
- Submit a Manuscript
- Subscription Information
- Table of Contents
Journal of Nanomaterials
Volume 2012 (2012), Article ID 962073, 10 pages
doi:10.1155/2012/962073
Morphological and Structural Studies of Titanate and Titania Nanostructured Materials Obtained after Heat Treatments of Hydrothermally Produced Layered Titanate
1School of Material and Mineral Resources Engineering, Engineering Campus, University of Science, Malaysia, Seri Ampangan, Nibong Tebal, 14300 Pulau Pinang, Malaysia
2Department of Chemical Sciences, Faculty of Science and Technology, Universiti Malaysia Terengganu, 21030 Kuala Terengganu, Malaysia
3School of Chemical Engineering, Engineering Campus, University of Science, Malaysia, Seri Ampangan, Nibong Tebal, 14300 Pulau Pinang, Malaysia
Received 18 June 2012; Revised 1 September 2012; Accepted 5 September 2012
Academic Editor: Renzhi Ma
Copyright © 2012 Mohd Hasmizam Razali et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
Mohd Hasmizam Razali, Ahmad-Fauzi Mohd Noor, Abdul Rahman Mohamed, and Srimala Sreekantan, “Morphological and Structural Studies of Titanate and Titania Nanostructured Materials Obtained after Heat Treatments of Hydrothermally Produced Layered Titanate,” Journal of Nanomaterials, vol. 2012, Article ID 962073, 10 pages, 2012. doi:10.1155/2012/962073