- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Annual Issues
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Reviewers Acknowledgment
- Submit a Manuscript
- Subscription Information
- Table of Contents
Journal of Nanomaterials
Volume 2012 (2012), Article ID 986454, 10 pages
doi:10.1155/2012/986454
Fabrication and Application of Iron(III)-Oxide Nanoparticle/Polydimethylsiloxane Composite Cone in Microfluidic Channels
1Department of Mechanical Engineering, National Taiwan University, Taipei 10617, Taiwan
2Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan
3Department of Civil and Environmental Engineering, National University of Kaohsiung, Kaohsiung 81148, Taiwan
Received 4 May 2012; Accepted 5 December 2012
Academic Editor: Gaurav Mago
Copyright © 2012 Cheng-Chun Huang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
Cheng-Chun Huang, Ming-Dao Wu, Dao Liang, Jiashing Yu, Po-Jen Shih, and Wen-Pin Shih, “Fabrication and Application of Iron(III)-Oxide Nanoparticle/Polydimethylsiloxane Composite Cone in Microfluidic Channels,” Journal of Nanomaterials, vol. 2012, Article ID 986454, 10 pages, 2012. doi:10.1155/2012/986454