About this Journal Submit a Manuscript Table of Contents
Journal of Nanomaterials
Volume 2013 (2013), Article ID 373414, 7 pages
http://dx.doi.org/10.1155/2013/373414
Research Article

Graphene Oxide Reinforced Polylactic Acid/Polyurethane Antibacterial Composites

1Key Laboratory of Mechanics on Environment and Disaster in Western China, The Ministry of Education of China, Lanzhou 730000, China
2Institute of Solid Mechanics, School of Civil Engineering and Mechanics, Lanzhou University, Lanzhou 730000, China
3School of Stomatology, Lanzhou University, Lanzhou 730000, China
4Department of Stomatology, Traditional Chinese Medicine Hospital of Gansu Province, Lanzhou 730050, China

Received 13 June 2013; Accepted 12 August 2013

Academic Editor: Xingbin Yan

Copyright © 2013 Xiaoli An et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Langer and J. P. Vacanti, “Tissue engineering,” Science, vol. 260, no. 5110, pp. 920–926, 1993. View at Scopus
  2. V. Maquet, A. R. Boccaccini, L. Pravata, I. Notingher, and R. Jérôme, “Porous poly(α-hydroxyacid)/Bioglass composite scaffolds for bone tissue engineering,” Biomaterials, vol. 25, no. 18, pp. 4185–4194, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. F. Yang, R. Murugan, S. Ramakrishna, X. Wang, Y.-X. Ma, and S. Wang, “Fabrication of nano-structured porous PLLA scaffold intended for nerve tissue engineering,” Biomaterials, vol. 25, no. 10, pp. 1891–1900, 2004. View at Publisher · View at Google Scholar · View at Scopus
  4. A. R. Boccaccini, X. Chatzistavrou, J. J. Blaker, and S. N. Nazhat, “Degradable and bioactive synthetic composite scaffolds for bone tissue engineering,” in Degradation of Implant Materials, pp. 111–137, Springer, New York, NY, USA, 2012. View at Publisher · View at Google Scholar
  5. S. Y. Ivanov, R. F. Mukhametshin, A. A. Muraev, and D. V. Solodkaya, “Synthetic materials used for the substitution of bone defects,” Annals of Oral & Maxillofacial Surgery, vol. 1, no. 1, pp. 1–4, 2013.
  6. A. Aravamudhan, D. M. Ramos, J. Nip et al., “Cellulose and collagen derived micro-nano structured scaffolds for bone tissue engineering,” Journal of Biomedical Nanotechnology, vol. 9, no. 4, pp. 719–731, 2013.
  7. C. Liu, Z. Xia, and J. T. Czernuszka, “Design and development of three-dimensional scaffolds for tissue engineering,” Chemical Engineering Research and Design, vol. 85, no. 7 A, pp. 1051–1064, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. N. Kébir, I. Campistron, A. Laguerre, J.-F. Pilard, C. Bunel, and T. Jouenne, “Use of telechelic cis-1,4-polyisoprene cationomers in the synthesis of antibacterial ionic polyurethanes and copolyurethanes bearing ammonium groups,” Biomaterials, vol. 28, no. 29, pp. 4200–4208, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. G. N. Belibasakis, T. Thurnheer, and N. Bostanci, “Infections associated with implanted dental devices,” in Biomaterials Associated Infection, pp. 249–271, Springer, New York, NY, USA, 2013. View at Publisher · View at Google Scholar
  10. A. G. Gristina, “Biomaterial-centered infection: microbial adhesion versus tissue integration,” Science, vol. 237, no. 4822, pp. 1588–1595, 1987. View at Scopus
  11. P. M. Sivakumar, S. Cometa, M. Alderighi, V. Prabhawathi, M. Doble, and F. Chiellini, “Chalcone embedded polyurethanes as a biomaterial: synthesis, characterization and antibacterial adhesion,” Carbohydrate Polymers, vol. 87, no. 1, pp. 353–360, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. K. Feng, H. Sun, M. A. Bradley, E. J. Dupler, W. V. Giannobile, and P. X. Ma, “Novel antibacterial nanofibrous PLLA scaffolds,” Journal of Controlled Release, vol. 146, no. 3, pp. 363–369, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. Z.-C. Xing, W.-P. Chae, J.-Y. Baek, M.-J. Choi, Y. Jung, and I.-K. Kang, “In vitro assessment of antibacterial activity and cytocompatibility of silver-containing PHBV nanofibrous scaffolds for tissue engineering,” Biomacromolecules, vol. 11, no. 5, pp. 1248–1253, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. J. B. Lee, H. N. Park, W. K. Ko et al., “Poly(L-lactic acid)/hydroxyapatite nanocylinders as nanofibrous structure for bone tissue engineering scaffolds,” Journal of Biomedical Nanotechnology, vol. 9, no. 3, pp. 424–429, 2013.
  15. M. Yeganegi, R. A. Kandel, and J. P. Santerre, “Characterization of a biodegradable electrospun polyurethane nanofiber scaffold: mechanical properties and cytotoxicity,” Acta Biomaterialia, vol. 6, no. 10, pp. 3847–3855, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. H. Bakhshi, H. Yeganeh, and S. Mehdipour-Ataei, “Synthesis and evaluation of antibacterial polyurethane coatings made from soybean oil functionalized with dimethylphenylammonium iodide and hydroxyl groups,” Journal of Biomedical Materials Research A, vol. 101, no. 6, pp. 1599–1611, 2013.
  17. N. Fong, A. Simmons, and L. A. Poole-Warren, “Antibacterial polyurethane nanocomposites using chlorhexidine diacetate as an organic modifier,” Acta Biomaterialia, vol. 6, no. 7, pp. 2554–2561, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. A. S. Rowlands, S. A. Lim, D. Martin, and J. J. Cooper-White, “Polyurethane/poly(lactic-co-glycolic) acid composite scaffolds fabricated by thermally induced phase separation,” Biomaterials, vol. 28, no. 12, pp. 2109–2121, 2007. View at Publisher · View at Google Scholar · View at Scopus
  19. K. S. Novoselov, A. K. Geim, S. V. Morozov et al., “Electric field in atomically thin carbon films,” Science, vol. 306, no. 5696, pp. 666–669, 2004. View at Publisher · View at Google Scholar · View at Scopus
  20. M. Song, L. Yu, and Y. Wu, “Simple synthesis and enhanced performance of graphene oxide-gold composites,” Journal of Nanomaterials, vol. 2012, Article ID 135138, 5 pages, 2012. View at Publisher · View at Google Scholar
  21. J. Chen, G. Zhang, B. Luo, D. Sun, X. Yan, and Q. Xue, “Surface amorphization and deoxygenation of graphene oxide paper by Ti ion implantation,” Carbon, vol. 49, no. 9, pp. 3141–3147, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. Y. Zhu, S. Murali, W. Cai et al., “Graphene and graphene oxide: synthesis, properties, and applications,” Advanced Materials, vol. 22, no. 35, pp. 3906–3924, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. J.-W. Jiang, J.-S. Wang, and B. Li, “Young's modulus of graphene: a molecular dynamics study,” Physical Review B, vol. 80, no. 11, Article ID 113405, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. Shi, W. Fang, K. Zhang, W. Zhang, and L.-J. Li, “Photoelectrical response in single-layer graphene transistors,” Small, vol. 5, no. 17, pp. 2005–2011, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. X. Yan, J. Chen, J. Yang, Q. Xue, and P. Miele, “Fabrication of free-standing, electrochemically active, and biocompatible graphene oxide-polyaniline and graphene-polyaniline hybrid papers,” ACS Applied Materials and Interfaces, vol. 2, no. 9, pp. 2521–2529, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. Y. Xu, W. Hong, H. Bai, C. Li, and G. Shi, “Strong and ductile poly(vinyl alcohol)/graphene oxide composite films with a layered structure,” Carbon, vol. 47, no. 15, pp. 3538–3543, 2009. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. Feng, X. Zhang, Y. Shen, K. Yoshino, and W. Feng, “A mechanically strong, flexible and conductive film based on bacterial cellulose/graphene nanocomposite,” Carbohydrate Polymers, vol. 87, no. 1, pp. 644–649, 2012. View at Publisher · View at Google Scholar · View at Scopus
  28. L. M. Veca, F. Lu, M. J. Meziani et al., “Polymer functionalization and solubilization of carbon nanosheets,” Chemical Communications, no. 18, pp. 2565–2567, 2009. View at Publisher · View at Google Scholar · View at Scopus
  29. H. J. Salavagione, M. A. Gómez, and G. Martínez, “Polymeric modification of graphene through esterification of graphite oxide and poly(vinyl alcohol),” Macromolecules, vol. 42, no. 17, pp. 6331–6334, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. Y. Chen, Y. Qi, Z. Tai, X. Yan, F. Zhu, and Q. Xue, “Preparation, mechanical properties and biocompatibility of graphene oxide/ultrahigh molecular weight polyethylene composites,” European Polymer Journal, vol. 48, no. 6, pp. 1026–1033, 2012. View at Publisher · View at Google Scholar · View at Scopus
  31. Y. Xu, H. Bai, G. Lu, C. Li, and G. Shi, “Flexible graphene films via the filtration of water-soluble noncovalent functionalized graphene sheets,” Journal of the American Chemical Society, vol. 130, no. 18, pp. 5856–5857, 2008. View at Publisher · View at Google Scholar · View at Scopus
  32. W. Hu, C. Peng, W. Luo et al., “Graphene-based antibacterial paper,” ACS Nano, vol. 4, no. 7, pp. 4317–4323, 2010. View at Publisher · View at Google Scholar · View at Scopus
  33. O. Akhavan and E. Ghaderi, “Toxicity of graphene and graphene oxide nanowalls against bacteria,” ACS Nano, vol. 4, no. 10, pp. 5731–5736, 2010. View at Publisher · View at Google Scholar · View at Scopus
  34. J. Shen, M. Shi, N. Li et al., “Facile synthesis and application of Ag-chemically converted graphene nanocomposite,” Nano Research, vol. 3, no. 5, pp. 339–349, 2010. View at Publisher · View at Google Scholar · View at Scopus
  35. D. Sarkar, J.-C. Yang, A. Sen Gupta, and S. T. Lopina, “Synthesis and characterization of L-tyrosine based polyurethanes for biomaterial applications,” Journal of Biomedical Materials Research A, vol. 90, no. 1, pp. 263–271, 2009. View at Publisher · View at Google Scholar · View at Scopus
  36. Y. Zhang, C. Wang, X. Pei, Q. Wang, and T. Wang, “Shape memory polyurethanes containing azo exhibiting photoisomerization function,” Journal of Materials Chemistry, vol. 20, no. 44, pp. 9976–9981, 2010. View at Publisher · View at Google Scholar · View at Scopus
  37. W. S. Hummers Jr. and R. E. Offeman, “Preparation of graphitic oxide,” Journal of the American Chemical Society, vol. 80, no. 6, p. 1339, 1958. View at Scopus
  38. Y. Xu, H. Bai, G. Lu, C. Li, and G. Shi, “Flexible graphene films via the filtration of water-soluble noncovalent functionalized graphene sheets,” Journal of the American Chemical Society, vol. 130, no. 18, pp. 5856–5857, 2008. View at Publisher · View at Google Scholar · View at Scopus
  39. D. R. Dreyer, S. Park, C. W. Bielawski, and R. S. Ruoff, “The chemistry of graphene oxide,” Chemical Society reviews, vol. 39, no. 1, pp. 228–240, 2010. View at Scopus
  40. X. Zhou, Y. Zhang, C. Wang et al., “Photo-fenton reaction of graphene oxide: a new strategy to prepare graphene quantum dots for dna cleavage,” ACS Nano, vol. 6, no. 8, pp. 6592–6599, 2012.
  41. A. K. Geim, “Graphene: status and prospects,” Science, vol. 324, no. 5934, pp. 1530–1534, 2009. View at Publisher · View at Google Scholar · View at Scopus
  42. D. Cai and M. Song, “Preparation of fully exfoliated graphite oxide nanoplatelets in organic solvents,” Journal of Materials Chemistry, vol. 17, no. 35, pp. 3678–3680, 2007. View at Publisher · View at Google Scholar · View at Scopus