Caffeic Acid Phenethyl Ester Loaded PLGA Nanoparticles: Effect of Various Process Parameters on Reaction Yield, Encapsulation Efficiency, and Particle Size

Table 1

Various process parameters of CAPE loaded NPs.

Nanoparticle number	CAPE and PLGA amount		PVA		Solvent type
	CAPE (mg)	PLGA (mg)	(%)	mL	Aseton; (mL)	DCM; (mL)	Et-OH; (mL)
NP 1	10	100	3	4	—	1.5	0.5
NP 2	20	100	3	4	—	1.5	0.5
NP 3	30	100	3	4	—	1.5	0.5
NP 4	40	100	3	4	—	1.5	0.5
NP 5	50	100	3	4	—	1.5	0.5
NP 6	20	100	0.1	4	—	1.5	0.5
NP 7	20	100	0.5	4	—	1.5	0.5
NP 8	20	100	1	4	—	1.5	0.5
NP 9	20	100	2	4	—	1.5	0.5
NP 10	20	100	3	6	—	1.5	0.5
NP 11	20	100	3	8	—	1.5	0.5
NP 12	20	100	3	10	—	1.5	0.5
NP 13	20	100	3	20	—	1.5	0.5
NP 14	20	100	3	4	0.5	1	0.5
NP 15	20	100	3	4	0.75	0.75	0.5
NP 16	20	100	3	4	1	0.5	0.5
NP 17	20	100	3	4	1.5	—	0.5
NP 18	20	200	3	4	—	1.5	0.5
NP 19	20	300	3	4	—	1.5	0.5
NP 20	20	400	3	4	—	1.5	0.5
Optimized NP	50	100	2	4	—	1.5	0.5