Research Article
Influence of Milling Time on Structural and Microstructural Parameters of Ni50Ti50 Prepared by Mechanical Alloying Using Rietveld Analysis
Figure 6
Rietveld refinements of XRD patterns of the milled powders for (a) 1 h (GOF = 1.41), (b) 3 h (GOF = 1.45), (c) 6 h (GOF = 1.43), (d) 12 h (GOF = 1.22), (e) 24 h (GOF = 1.20), (f) 48 h (GOF = 1.19), and (g) 72 h (GOF = 1.23).
(a) |
(b) |
(c) |
(d) |
(e) |
(f) |
(g) |