Fabrication and Applications of Electrospun Nanofibers

Xu, Lan; Liu, Fujuan; Wan, Yuqin; Ganji, Domiri D.; Faraz, Naeem

doi:https://doi.org/10.1155/2015/697236

Journal of Nanomaterials

On this page

Acknowledgments References Copyright Related Articles

Special Issue

Fabrication and Applications of Electrospun Nanofibers

View this Special Issue

Editorial | Open Access

Volume 2015 | Article ID 697236 | https://doi.org/10.1155/2015/697236

Fabrication and Applications of Electrospun Nanofibers

Lan Xu,¹Fujuan Liu,²Yuqin Wan,³Domiri D. Ganji,⁴and Naeem Faraz⁵

Received02 Mar 2015

Accepted02 Mar 2015

Published11 May 2015

Industrialization of nanofibers has been the hottest topic in the whole world because of the various advanced applications of nanofibers in electronic, catalytic, and hydrogen-storage systems, invisibility device (e.g., stealth plane), photonic structures, sensors, medicine, pharmacy and drug delivery, adsorption, separation, filtering, catalysis, fluid storage and transport, electrode materials, radiation protection, medical implants, cell supports, and others [1, 2]. Many highly high-tech enterprises appeared recently in China for mass production of nanofibers, for example, Nantong Bubbfil Nanotechnology Company Limited. Though the remarkable progress in nanotechnology, there are still some open problems to be solved.

(1) What Is the Definition of Nanofibers? There is a confused use of nanofibers in the open literature. What is the correct definition of nanofibers? Li and He [3] define that any materials behaving unlike their mother materials when the size of materials tends to nano/microscales and having obvious nanoeffects [4] are called nanomaterials. Nanofibers are nanomaterials that have a large length-diameter ratio.

(2) Effect of Nanoeffects of Nanofiber on Various Applications. When nanofibers are applied in various fields, many astonishing nanoeffects are predicted, for example, extremely high efficiency in reaction or permeability [4]. Majumder et al. found that liquid flow through a membrane composed of an array of aligned carbon nanotubes is 4 to 5 orders of magnitude faster than would be predicted from conventional fluid-flow theory [5].

(3) Industrialization of Nanofibers. Electrospinning is not valid for mass production of nanofibers due to its very limited throughput. The mechanism for mass production has been studied, but only few can be used in industry. The Bubbfil spinning process by Nantong Bubbfil Nanotechnology Company Limited is the most advanced nanotechnology so far, which uses polymer/melts’ bubbles instead of solutions/melts for mass production of nanofibers [6].

According to Chen equation [7], the surface tension of a spherical bubble under electrostatic field can be expressed as where is the surface tension, the radius of the bubble, the pressure difference, the electric field intensity, andthe electric charge per area.

In case the bubble size tends to nano/microscales, the surface tension is remarkably reduced that is very helpful for the electrostatic force to overcome the surface tension of bubbles for mass production of nanofibers.

This special issue addresses focus on electrospinning and nanofiber applications and special attention is paid to nanoeffects of various applications.

Acknowledgments

The work is supported by Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD), National Natural Science Foundation of China (Grant no. 11372205), Jiangsu Provincial Natural Science Foundation of China (Grant no. BK20131175), Natural Science Foundation of the Jiangsu Higher Education Institutions of China (Grant no. 14KJA130001), Suzhou Science and Technology Project (Grant no. SYG201434), Nantong Science and Technology Project (Grant no. BK2014050), and Science & Technology Pillar Program of Jiangsu Province (Grant no. BE2013072). Hereby Dr. L. Xu should thank the coeditors of this special issue, Dr. F. Liu, Dr. Y. Wan, Dr. D. D. Ganji, and Dr. N. Faraz, for their effective work in this special issue; Dr. L. Xu should also thank all reviewers for their time and effect to improve the special issue. Without their help, the success of this special issue was impossible.

Lan Xu
Fujuan Liu
Yuqin Wan
Domiri D. Ganji
Naeem Faraz

References

J.-H. He, H.-Y. Kong, R.-R. Yang et al., “Review on fiber morphology obtained by bubble electrospinning and blown bubble spinning,” Thermal Science, vol. 16, no. 5, pp. 1263–1279, 2012.
View at: Publisher Site | Google Scholar
L. Xu, Y. Wu, and Y. Liu, “Electrospun nanoporous materials: reality, potential and challenges,” Materials Science and Technology, vol. 26, no. 11, pp. 1304–1308, 2010.
View at: Publisher Site | Google Scholar
Z. B. Li and J. H. He, “When nanotechnology meets filteration: from nanofiber fabrication to biomimetic design,” Matéria (Rio de Janeiro), vol. 19, no. 4, pp. 1–3, 2014.
View at: Publisher Site | Google Scholar
J.-H. He, Y.-Q. Wan, and L. Xu, “Nano-effects, quantum-like properties in electrospun nanofibers,” Chaos, Solitons & Fractals, vol. 33, no. 1, pp. 26–37, 2007.
View at: Publisher Site | Google Scholar
M. Majumder, N. Chopra, R. Andrews, and B. J. Hinds, “Nanoscale hydrodynamics: enhanced flow in carbon nanotubes,” Nature, vol. 438, no. 7064, p. 44, 2005.
View at: Publisher Site | Google Scholar
R.-X. Chen, Y. Li, and J.-H. He, “Mini-review on Bubbfil spinning process for mass-production of nanofibers,” Matéria, vol. 19, no. 4, pp. 325–343, 2014.
View at: Publisher Site | Google Scholar
R. X. Chen, “On surface tension of a bubble under presence of electrostatic force,” Thermal Science, vol. 19, no. 1, pp. 353–355, 2015.
View at: Google Scholar

Copyright

Copyright © 2015 Lan Xu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

2289

Downloads

1300

Citations