About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [12,267 citations: 1–100 of 11,043 articles]

Articles published in Journal of Nanomaterials have been cited 12,267 times. The following is a list of the 11,043 articles that have cited the articles published in Journal of Nanomaterials.

  • Konrat Kerdnawee, Chompoopitch Termvidchakorn, Pacharaporn Yaisanga, Jirapat Pakchamsai, Cheewapon Chookiat, Apiluck Eiad-ua, Winadda Wongwiriyapan, Weerawut Chaiwat, Sakhon Ratchahat, Kajornsak Faungnawakij, Komkrit Suttiponparnit, and Tawatchai Charinpanitkul, “Present Advancement in Production of Carbon Nanotubes and Their Derivatives from Industrial Waste with Promising Applications,” KONA Powder and Particle Journal, 2017. View at Publisher · View at Google Scholar
  • Ahmad Mohammed Gumel, and M. S. M. Annuar, “Thermomyces lanuginosus lipase-catalyzed synthesis of natural flavor esters in a continuous flow microreactor,” 3 Biotech, vol. 6, no. 1, 2016. View at Publisher · View at Google Scholar
  • Rosamaria Lappano, Damiano Rigiracciolo, Paola De Marco, Silvia Avino, Anna Rita Cappello, Camillo Rosano, Marcello Maggiolini, and Ernestina Marianna De Francesco, “Recent Advances on the Role of G Protein-Coupled Receptors in Hypoxia-Mediated Signaling,” Aaps Journal, vol. 18, no. 2, pp. 305–310, 2016. View at Publisher · View at Google Scholar
  • Tran Van Dang, Nguyen Duc Hoa, Nguyen Van Duy, and Nguyen Van Hieu, “ Chlorine Gas Sensing Performance of On-Chip Grown ZnO, WO 3 , and SnO 2 Nanowire Sensors ,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Nianjun Yang, Siegfried R. Waldvogel, and Xin Jiang, “Electrochemistry of Carbon Dioxide on Carbon Electrodes,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Ling Dai, Viacheslav Sorkin, and Yong-Wei Zhang, “Effect of Surface Chemistry on the Mechanisms and Governing Laws of Friction and Wear,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Gasidit Panomsuwan, Nagahiro Saito, and Takahiro Ishizaki, “Nitrogen-Doped Carbon Nanoparticle–Carbon Nanofiber Composite as an Efficient Metal-Free Cathode Catalyst for Oxygen Reduction Reaction,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Arie Mulyadi, Zhe Zhang, and Yulin Deng, “Fluorine-Free Oil Absorbents Made from Cellulose Nanofibril Aerogels,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Morteza Aramesh, Amir Djalalian-Assl, Mir Massoud Aghili Yajadda, Steven Prawer, and Kostya (Ken) Ostrikov, “Thin Nanoporous Metal–Insulator–Metal Membranes,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Sai Jin Xiao, Xiao Jing Zhao, Ping Ping Hu, Zhao Jun Chu, Cheng Zhi Huang, and Li Zhang, “Highly Photoluminescent Molybdenum Oxide Quantum Dots: One-Pot Synthesis and Application in 2,4,6-Trinitrotoluene Determination,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Peng Gao, Aaron Hunter, Sherwood Benavides, Mark J. Summe, Feng Gao, and William A. Phillip, “Template Synthesis of Nanostructured Polymeric Membranes by Inkjet Printing,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Yuqiao Sun, Wen Li, Xiaoli Wu, Na Zhang, Yongnu Zhang, Songying Ouyang, Xiyong Song, Xinyu Fang, Ramakrishna Seeram, Wei Xue, Liumin He, and Wutian Wu, “Functional Self-Assembling Peptide Nanofiber Hydrogels Designed for Nerve Degeneration,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Suk-Hee Park, Min Sung Kim, Byungjun Lee, Jean Ho Park, Hye Jin Lee, Nak Kyu Lee, Noo Li Jeon, and Kahp-Yang Suh, “Creation of a Hybrid Scaffold with Dual Configuration of Aligned and Random Electrospun Fibers,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Abdel Rahman Abdel Fattah, Tahereh Majdi, Ahmed M. Abdalla, Suvojit Ghosh, and Ishwar K. Puri, “Nickel Nanoparticles Entangled in Carbon Nanotubes: Novel Ink for Nanotube Printing,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Yo Han Kwon, Matthew Huie, Dalsu Choi, Mincheol Chang, Amy C. Marschilok, Kenneth J. Takeuchi, Esther S. Takeuchi, and Elsa Reichmanis, “Towards Uniformly Dispersed Battery Electrode Composite Materials: Characteristics and Performance,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Li Yao, Luis E. Oquendo, Morgan W. Schulze, Ronald M. Lewis, Wayne L. Gladfelter, and Marc A. Hillmyer, “ Poly(cyclohexylethylene)- block -Poly(lactide) Oligomers for Ultrasmall Nanopatterning Using Atomic Layer Deposition ,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Huibin Chang, Jeffrey Luo, Amir A. Bakhtiary Davijani, An-Ting Chien, Po-Hsiang Wang, H. Clive Liu, and Satish Kumar, “Individually Dispersed Wood-Based Cellulose Nanocrystals,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Rong-Chang Zeng, Lan-yue Cui, Ke Jiang, Rui Liu, Bao-Dong Zhao, and Yu-Feng Zheng, “ In Vitro Corrosion and Cytocompatibility of a Microarc Oxidation Coating and Poly( l -lactic acid) Composite Coating on Mg–1Li–1Ca Alloy for Orthopedic Implants ,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Wessam A. Sarhan, Hassan M. E. Azzazy, and Ibrahim M. El-Sherbiny, “ Honey/Chitosan Nanofiber Wound Dressing Enriched with Allium sativum and Cleome droserifolia : Enhanced Antimicrobial and Wound Healing Activity ,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Seonmi Baek, Rajendra K. Singh, Tae-Hyun Kim, Jae-won Seo, Ueon Sang Shin, Wojciech Chrzanowski, and Hae-Won Kim, “Triple Hit with Drug Carriers: pH- and Temperature-Responsive Theranostics for Multimodal Chemo- and Photothermal Therapy and Diagnostic Applications,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Jérôme Garnier, Javier Arias-Zapata, Olivier Marconot, Sandrine Arnaud, Sophie Böhme, Cécile Girardot, Denis Buttard, and Marc Zelsmann, “ Sub-10 nm Silicon Nanopillar Fabrication Using Fast and Brushless Thermal Assembly of PS- b -PDMS Diblock Copolymer ,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Xiu-Lan Yang, Xiao-Jie Ju, Xiao-Ting Mu, Wei Wang, Rui Xie, Zhuang Liu, and Liang-Yin Chu, “Core–Shell Chitosan Microcapsules for Programmed Sequential Drug Release,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Kamolrat Metavarayuth, Pongkwan Sitasuwan, Xia Zhao, Yuan Lin, and Qian Wang, “Influence of Surface Topographical Cues on the Differentiation of Mesenchymal Stem Cells in Vitro,” ACS Biomaterials Science & Engineering, 2016. View at Publisher · View at Google Scholar
  • Graham J. Hickman, David J. Boocock, A. Graham Pockley, and Carole C. Perry, “The Importance and Clinical Relevance of Surfaces in Tissue Culture,” ACS Biomaterials Science & Engineering, 2016. View at Publisher · View at Google Scholar
  • Lianjun Liu, Yuqiu Jiang, Huilei Zhao, Jiatang Chen, Jianli Cheng, Kesong Yang, and Ying Li, “ Engineering Coexposed {001} and {101} Facets in Oxygen-Deficient TiO 2 Nanocrystals for Enhanced CO 2 Photoreduction under Visible Light ,” ACS Catalysis, pp. 1097–1108, 2016. View at Publisher · View at Google Scholar
  • Zhantong Wang, Peng Huang, Orit Jacobson, Zhe Wang, Yijing Liu, Lisen Lin, Jing Lin, Nan Lu, Huimin Zhang, Rui Tian, Gang Niu, Gang Liu, and Xiaoyuan Chen, “Biomineralization-Inspired Synthesis of Copper Sulfide–Ferritin Nanocages as Cancer Theranostics,” ACS Nano, 2016. View at Publisher · View at Google Scholar
  • Rui Kuai, Dan Li, Y. Eugene Chen, James J. Moon, and Anna Schwendeman, “High-Density Lipoproteins: Nature’s Multifunctional Nanoparticles,” ACS Nano, 2016. View at Publisher · View at Google Scholar
  • Ferry A. A. Nugroho, Beniamino Iandolo, Jakob B. Wagner, and Christoph Langhammer, “Bottom-Up Nanofabrication of Supported Noble Metal Alloy Nanoparticle Arrays for Plasmonics,” ACS Nano, 2016. View at Publisher · View at Google Scholar
  • Jonathan James Stanley Rickard, Ian Farrer, and Pola Goldberg Oppenheimer, “Tunable Nanopatterning of Conductive Polymers via Electrohydrodynamic Lithography,” ACS Nano, 2016. View at Publisher · View at Google Scholar
  • Francesca Pietra, Luca De Trizio, Anne W. Hoekstra, Nicolas Renaud, Mirko Prato, Ferdinand C. Grozema, Patrick J. Baesjou, Rolf Koole, Liberato Manna, and Arjan J. Houtepen, “ Tuning the Lattice Parameter of In x Zn y P for Highly Luminescent Lattice-Matched Core/Shell Quantum Dots ,” ACS Nano, 2016. View at Publisher · View at Google Scholar
  • Muhammad Iqbal, Tapas K. Purkait, Greg G. Goss, James R. Bolton, Mohamed Gamal El-Din, and Jonathan G. C. Veinot, “Application of Engineered Si Nanoparticles in Light-Induced Advanced Oxidation Remediation of a Water-Borne Model Contaminant,” ACS Nano, 2016. View at Publisher · View at Google Scholar
  • Kan Fu, Shutang Chen, Jing Zhao, and Brian G. Willis, “Dielectrophoretic Assembly of Gold Nanoparticles in Nanoscale Junctions for Rapid, Miniature Chemiresistor Vapor Sensors,” ACS Sensors, 2016. View at Publisher · View at Google Scholar
  • Tizazu Mekonnen, Manjusri Misra, and Amar K. Mohanty, “ Fermented Soymeals and Their Reactive Blends with Poly(butylene adipate- co -terephthalate) in Engineering Biodegradable Cast Films for Sustainable Packaging ,” ACS Sustainable Chemistry & Engineering, 2016. View at Publisher · View at Google Scholar
  • Mu-Hsiang Hsu, Chi-Jung Chang, and Hau-Ting Weng, “ Efficient H 2 Production Using Ag 2 S-Coupled ZnO@ZnS Core–Shell Nanorods Decorated Metal Wire Mesh as an Immobilized Hierarchical Photocatalyst ,” ACS Sustainable Chemistry & Engineering, 2016. View at Publisher · View at Google Scholar
  • R. Oraon, A. De Adhikari, S. K. Tiwari, and G. C. Nayak, “Enhanced Specific Capacitance of Self-Assembled Three-Dimensional Carbon Nanotube/Layered Silicate/Polyaniline Hybrid Sandwiched Nanocomposite for Supercapacitor Applications,” ACS Sustainable Chemistry & Engineering, 2016. View at Publisher · View at Google Scholar
  • Amit Kumar Sarkar, Arka Saha, Abhrojyoti Tarafder, Asit Baran Panda, and Sagar Pal, “ Efficient Removal of Toxic Dyes via Simultaneous Adsorption and Solar Light Driven Photodegradation Using Recyclable Functionalized Amylopectin–TiO 2 –Au Nanocomposite ,” ACS Sustainable Chemistry & Engineering, 2016. View at Publisher · View at Google Scholar
  • Hanyu Zhang, Megan Frey, Criztel Navizaga, Courtney Lenzo, Julian Taborda, William Taifan, Abdolhamid Sadeghnejad, Alfredas Martynas Sviklas, and Jonas Baltrusaitis, “Dairy Wastewater for Production of Chelated Biodegradable Zn Micronutrient Fertilizers,” ACS Sustainable Chemistry & Engineering, 2016. View at Publisher · View at Google Scholar
  • So-Jung Gwak, Justin Nice, Jeremy Zhang, Benjamin Green, Christian Macks, Sooneon Bae, Ken Webb, and Jeoung Soo Lee, “Cationic, amphiphilic copolymer micelles as nucleic acid carriers for enhanced transfection in rat spinal cord,” Acta Biomaterialia, 2016. View at Publisher · View at Google Scholar
  • Jinyan Li, Dong Zhai, Fang Lv, Qingqing Yu, Hongshi Ma, Jinbo Yin, Zhengfang Yi, Mingyao Liu, Jiang Chang, and Chengtie Wu, “Preparation of copper-containing bioactive glass/eggshell membrane nanocomposites for improving angiogenesis, antibacterial activity and wound healing,” Acta Biomaterialia, 2016. View at Publisher · View at Google Scholar
  • Anil Singh, Sujeet Chaudhary, and D.K. Pandya, “High conductivity indium doped ZnO films by metal target reactive co-sputtering,” Acta Materialia, vol. 111, pp. 1–9, 2016. View at Publisher · View at Google Scholar
  • Manuela Stan, Adriana Popa, Dana Toloman, Teofil-Danut Silipas, and Dan Cristian Vodnar, “Antibacterial and Antioxidant Activities of ZnO Nanoparticles Synthesized Using Extracts of Allium sativum, Rosmarinus officinalis and Ocimum basilicum,” Acta Metallurgica Sinica (English Letters), 2016. View at Publisher · View at Google Scholar
  • Narjes Ebrahimi, Sara Rasoul-Amini, Alireza Ebrahiminezhad, Younes Ghasemi, Ahmad Gholami, and Hassan Seradj, “Comparative Study on Characteristics and Cytotoxicity of Bifunctional Magnetic-Silver Nanostructures: Synthesized Using Three Different Reducing Agents,” Acta Metallurgica Sinica (English Letters), vol. 29, no. 4, pp. 326–334, 2016. View at Publisher · View at Google Scholar
  • N.G. Debelo, F.B. Dejene, V.N. Mal'nev, T. Senbeta, B. Mesfin, and K. Roro, “Effect of Retrapping on Thermoluminescence Peak Intensities of Small Amorphous Silicon Quantum Dots,” Acta Physica Polonica A, vol. 129, no. 3, pp. 362–366, 2016. View at Publisher · View at Google Scholar
  • Sheng Qi, and Duncan Craig, “Recent developments in micro- and nanofabrication techniques for the preparation of amorphous pharmaceutical dosage forms,” Advanced Drug Delivery Reviews, 2016. View at Publisher · View at Google Scholar
  • Magdalena Kopernik, Sławomir Kąc, Maciej Gawlikowski, and Grzegorz Cios, “Mechanical, Structural, and Chemical Analysis of Athrombogenic Multilayer Wall of Ventricular Assist Device Tested in Hydrodynamic Fatigue Tests ,” Advanced Engineering Materials, 2016. View at Publisher · View at Google Scholar
  • Rui M. A. Domingues, Silvia Chiera, Pavel Gershovich, Antonella Motta, Rui L. Reis, and Manuela E. Gomes, “Enhancing the Biomechanical Performance of Anisotropic Nanofibrous Scaffolds in Tendon Tissue Engineering: Reinforcement with Cellulose Nanocrystals,” Advanced Healthcare Materials, 2016. View at Publisher · View at Google Scholar
  • Ramendra K. Pal, Ahmed A. Farghaly, Maryanne M. Collinson, Subhas C. Kundu, and Vamsi K. Yadavalli, “Photolithographic Micropatterning of Conducting Polymers on Flexible Silk Matrices,” Advanced Materials, vol. 28, no. 7, pp. 1406–1412, 2016. View at Publisher · View at Google Scholar
  • Zuo-Bin Qin, Liang Tan, Zhao-Qing Liu, Shuang Chen, Ji-Hua Qin, Jie-Jian Tang, and Nan Li, “One-pot synthesis of ultrafine TiO2 nanoparticles with enhanced thermal conductivity for nanofluid applications,” Advanced Powder Technology, 2016. View at Publisher · View at Google Scholar
  • Marcin Lemanowicz, Andrzej Gierczycki, Wojciech Kuźnik, Joanna Milczyńska, and Paweł Bulanda, “Application of thermosensitive polymers in stabilization of colloids,” Advanced Powder Technology, 2016. View at Publisher · View at Google Scholar
  • W. Suthabanditpong, M. Tani, C. Takai, M. Fuji, R. Buntem, and T. Shirai, “Facile fabrication of light diffuser films based on hollow silica nanoparticles as fillers,” Advanced Powder Technology, 2016. View at Publisher · View at Google Scholar
  • Carmen Camacho-Ballesta, Emilio Zornoza, and Pedro Garces, “Performance of cement-based sensors with CNT for strain sensing,” Advances In Cement Research, vol. 28, no. 4, pp. 274–284, 2016. View at Publisher · View at Google Scholar
  • Justyna Łuczak, Marta Paszkiewicz, Anna Krukowska, Anna Malankowska, and Adriana Zaleska-Medynska, “Ionic liquids for nano- and microstructures preparation. Part 2: Application in synthesis,” Advances in Colloid and Interface Science, vol. 227, pp. 1–52, 2016. View at Publisher · View at Google Scholar
  • Zainal Abidin Ali, Rosiyah Yahya, Shamala Devi Sekaran, and R. Puteh, “Green Synthesis of Silver Nanoparticles Using Apple Extract and Its Antibacterial Properties,” Advances in Materials Science and Engineering, vol. 2016, pp. 1–6, 2016. View at Publisher · View at Google Scholar
  • Alireza Ebrahiminezhad, Mahboobeh Bagheri, Seyedeh-Masoumeh Taghizadeh, Aydin Berenjian, and Younes Ghasemi, “Biomimetic synthesis of silver nanoparticles using microalgal secretory carbohydrates as a novel anticancer and antimicrobial,” Advances in Natural Sciences: Nanoscience and Nanotechnology, vol. 7, no. 1, pp. 015018, 2016. View at Publisher · View at Google Scholar
  • Muhammad Usman Minhas, Mahmood Ahmad, Jamshed Anwar, and Shahzeb Khan, “Synthesis and Characterization of Biodegradable Hydrogels for Oral Delivery of 5-Fluorouracil Targeted to Colon: Screening with Preliminary In Vivo Studies,” Advances in Polymer Technology, 2016. View at Publisher · View at Google Scholar
  • Malihe Pooresmaeil, Yagoub Mansoori, Masoumeh Mirzaeinejad, and Ali Khodayari, “Efficient Removal of Methylene Blue by Novel Magnetic Hydrogel Nanocomposites of Poly(acrylic acid),” Advances in Polymer Technology, 2016. View at Publisher · View at Google Scholar
  • Ehsan Majd Faghihi, Darren Martin, Farhad Salimi, Grant Edwards, Congrong He, and Lidia Morawska, “What are the Driving Factors Influencing the Size Distribution of Airborne Synthetic Clay Particles Emitted from a Jet Milling Process?,” Aerosol And Air Quality Research, vol. 16, no. 1, pp. 25–35, 2016. View at Publisher · View at Google Scholar
  • Lin Zhao, Sungwoo Yang, Bikram Bhatia, Elise Strobach, and Evelyn N. Wang, “Modeling silica aerogel optical performance by determining its radiative properties,” AIP Advances, vol. 6, no. 2, pp. 025123, 2016. View at Publisher · View at Google Scholar
  • Dongda Zhang, Minxi Wan, Ehecatl A. del Rio-Chanona, Jianke Huang, Weiliang Wang, Yuanguang Li, and Vassilios S. Vassiliadis, “Dynamic modelling of Haematococcus pluvialis photoinduction for astaxanthin production in both attached and suspended photobioreactors,” Algal Research-Biomass Biofuels And Bioproducts, vol. 13, pp. 69–78, 2016. View at Publisher · View at Google Scholar
  • Jonathan Zinman, and Eric Zitzewitz, “Wintertime for Deceptive Advertising?,” American Economic Journal-Applied Economics, vol. 8, no. 1, pp. 177–192, 2016. View at Publisher · View at Google Scholar
  • José Martínez-Mendoza, Erika Espericueta-González, Diana Espericueta González, Gerardo Ortega-Zarzosa, and Azdrubal Lobo Guerrero, “Thermo-Stability of Natural Products Based on Chlorophyll Species Embedded in Silica Xerogel,” American Journal of Analytical Chemistry, vol. 07, no. 04, pp. 356–362, 2016. View at Publisher · View at Google Scholar
  • Dennis Halterman, Joe Guenthner, Susan Collinge, Nathaniel Butler, and David Douches, “Biotech Potatoes in the 21st Century: 20 Years Since the First Biotech Potato,” American Journal Of Potato Research, vol. 93, no. 1, pp. 1–20, 2016. View at Publisher · View at Google Scholar
  • John R. Lloyd, P. Suresh Jayasekara, and Kenneth A. Jacobson, “Characterization of polyamidoamino (PAMAM) dendrimers using in-line reversed phase LC electrospray ionization mass spectrometry,” Anal. Methods, vol. 8, no. 2, pp. 263–269, 2016. View at Publisher · View at Google Scholar
  • Bing Xia, Nan Qi, Jian Fu, and Su Liu, “A blocker-tolerant ZigBee transceiver with on-chip balun and CR/IQ/IIP2 self-calibrations for home automation,” Analog Integrated Circuits And Signal Processing, vol. 86, no. 1, pp. 11–23, 2016. View at Publisher · View at Google Scholar
  • Javier E. L. Villa, and Ronei J. Poppi, “A portable SERS method for the determination of uric acid using a paper-based substrate and multivariate curve resolution,” Analyst, vol. 141, no. 6, pp. 1966–1972, 2016. View at Publisher · View at Google Scholar
  • Zhiqin Yuan, Cho-Chun Hu, Huan-Tsung Chang, and Chao Lu, “Gold nanoparticles as sensitive optical probes,” Analyst, vol. 141, no. 5, pp. 1611–1626, 2016. View at Publisher · View at Google Scholar
  • Thomas S. Bedwell, and Michael J. Whitcombe, “Analytical applications of MIPs in diagnostic assays: future perspectives,” Analytical And Bioanalytical Chemistry, vol. 408, no. 7, pp. 1735–1751, 2016. View at Publisher · View at Google Scholar
  • Mei Lin, Junxing Huang, Dongsheng Zhang, Xingmao Jiang, Jia Zhang, Hong Yu, Yanhong Xiao, Yujuan Shi, and Ting Guo, “ Hepatoma-Targeted Radionuclide Immune Albumin Nanospheres: 131 I-antiAFPMcAb-GCV-BSA-NPs ,” Analytical Cellular Pathology, vol. 2016, pp. 1–8, 2016. View at Publisher · View at Google Scholar
  • Hiroyuki Takei, and Takayuki Okamoto, “Morphology Effects of Cap-shaped Silver Nanoparticle Films as a SERS Platform,” Analytical Sciences, vol. 32, no. 3, pp. 287–293, 2016. View at Publisher · View at Google Scholar
  • Mita Dasog, Julian Kehrle, Bernhard Rieger, and Jonathan G. C. Veinot, “Silicon Nanocrystals and Silicon-Polymer Hybrids: Synthesis, Surface Engineering, and Applications,” Angewandte Chemie-International Edition, vol. 55, no. 7, pp. 2322–2339, 2016. View at Publisher · View at Google Scholar
  • Selvaraj Mohana Roopan, “An Overview of Phytoconstituents, Biotechnological Applications, and Nutritive Aspects of Coconut (Cocos nucifera),” Applied Biochemistry and Biotechnology, 2016. View at Publisher · View at Google Scholar
  • Katherine Villa, Sebastián Murcia-López, Joan Ramón Morante, and Teresa Andreu, “An insight on the role of La in mesoporous WO3 for the photocatalytic conversion of methane into methanol,” Applied Catalysis B: Environmental, 2016. View at Publisher · View at Google Scholar
  • Evangelia Ioannidou, Alexandra Ioannidi, Zacharias Frontistis, Maria Antonopoulou, Charalampos Tselios, Dimitris Tsikritzis, Ioannis Konstantinou, Stella Kennou, Dimitris I. Kondarides, and Dionissios Mantzavinos, “Correlating the properties of hydrogenated titania to reaction kinetics and mechanism for the photocatalytic degradation of bisphenol A under solar irradiation,” Applied Catalysis B: Environmental, 2016. View at Publisher · View at Google Scholar
  • Danhua Mei, Xinbo Zhu, Chunfei Wu, Bryony Ashford, Paul T. Williams, and Xin Tu, “Plasma-photocatalytic conversion of CO2 at low temperatures: Understanding the synergistic effect of plasma-catalysis,” Applied Catalysis B-Environmental, vol. 182, pp. 525–532, 2016. View at Publisher · View at Google Scholar
  • Dimitrios A. Giannakoudakis, Javier A. Arcibar-Orozco, and Teresa J. Bandosz, “Effect of GO phase in Zn(OH)(2)/GO composite on the extent of photocatalytic reactive adsorption of mustard gas surrogate,” Applied Catalysis B-Environmental, vol. 183, pp. 37–46, 2016. View at Publisher · View at Google Scholar
  • Wenbo Wang, and Aiqin Wang, “Recent progress in dispersion of palygorskite crystal bundles for nanocomposites,” Applied Clay Science, vol. 119, pp. 18–30, 2016. View at Publisher · View at Google Scholar
  • Fatma Tomul, “The effect of ultrasonic treatment on iron-chromium pillared bentonite synthesis and catalytic wet peroxide oxidation of phenol,” Applied Clay Science, vol. 120, pp. 121–134, 2016. View at Publisher · View at Google Scholar
  • Adriana A. Silva, Bluma G. Soares, and Karim Dahmouche, “Organoclay-epoxy nanocomposites modified with polyacrylates: The effect of the clay mineral dispersion method,” Applied Clay Science, vol. 124-125, pp. 46–53, 2016. View at Publisher · View at Google Scholar
  • Jiazhuo Xie, Kun Zhang, Jianfeng Wu, Guangfeng Ren, Hongying Chen, and Jing Xu, “Bio-nanocomposite films reinforced with organo-modified layered double hydroxides: Preparation, morphology and properties,” Applied Clay Science, vol. 126, pp. 72–80, 2016. View at Publisher · View at Google Scholar
  • Yasaman Shaabani, Mohammad Sirousazar, and Farshad Kheiri, “Crosslinked swellable clay/egg white bionanocomposites,” Applied Clay Science, 2016. View at Publisher · View at Google Scholar
  • Seyedeh Sara Shafiei, Mahnaz Shavandi, Ghasem Ahangari, and Fatemeh Shokrolahi, “Electrospun layered double hydroxide/poly (ε-caprolactone) nanocomposite scaffolds for adipogenic differentiation of adipose-derived mesenchymal stem cells,” Applied Clay Science, vol. 127-128, pp. 52–63, 2016. View at Publisher · View at Google Scholar
  • R. Ben-Mansour, M.A. Habib, O.E. Bamidele, M. Basha, N.A.A. Qasem, A. Peedikakkal, T. Laoui, and M. Ali, “Carbon capture by physical adsorption: Materials, experimental investigations and numerical modeling and simulations – A review,” Applied Energy, vol. 161, pp. 225–255, 2016. View at Publisher · View at Google Scholar
  • Seung Yeop Myong, and Sang Won Jeon, “Efficient outdoor performance of esthetic bifacial a-Si:H semi-transparent PV modules,” Applied Energy, vol. 164, pp. 312–320, 2016. View at Publisher · View at Google Scholar
  • Ahmed A. Hussien, Mohd Z. Abdullah, and Moh’d A. Al-Nimr, “Single-phase heat transfer enhancement in micro/minichannels using nanofluids: Theory and applications,” Applied Energy, vol. 164, pp. 733–755, 2016. View at Publisher · View at Google Scholar
  • Jerry Chun-Wei Lin, Wensheng Gan, and Tzung-Pei Hong, “Maintaining the discovered high-utility itemsets with transaction modification,” Applied Intelligence, vol. 44, no. 1, pp. 166–178, 2016. View at Publisher · View at Google Scholar
  • Tae Jung Park, Kyoung G. Lee, and Sang Yup Lee, “Advances in microbial biosynthesis of metal nanoparticles,” Applied Microbiology And Biotechnology, vol. 100, no. 2, pp. 521–534, 2016. View at Publisher · View at Google Scholar
  • Sweety A. Wadhwani, Utkarsha U. Shedbalkar, Richa Singh, and Balu A. Chopade, “Biogenic selenium nanoparticles: current status and future prospects,” Applied Microbiology and Biotechnology, 2016. View at Publisher · View at Google Scholar
  • R. D. Vengrenovich, B. V. Ivanskii, I. I. Panko, and V. I. Kryvetskii, “Ostwald’s ripening of single-layer carbon nanotubes,” Applied Optics, vol. 55, no. 12, pp. B4, 2016. View at Publisher · View at Google Scholar
  • E. Ksinopoulou, A. Bakolas, and A. Moropoulou, “Modifying Si-based consolidants through the addition of colloidal nano-particles,” Applied Physics A, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • M. S. E. Hamroun, L. Guerbous, and A. Bensafi, “Luminescent spectroscopy and structural properties of Ce3+-doped low-temperature X1–Y2SiO5 material prepared by polymer-assisted sol–gel method,” Applied Physics A, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • Veera M. Boddu, and Matthew W. Brenner, “Energy dissipation in intercalated carbon nanotube forests with metal layers,” Applied Physics A-Materials Science & Processing, vol. 122, no. 2, 2016. View at Publisher · View at Google Scholar
  • Sonu Hooda, S. A. Khan, B. Satpati, D. Stange, D. Buca, M. Bala, C. Pannu, D. Kanjilal, and Debdulal Kabiraj, “Effect of ion beam parameters on engineering of nanoscale voids and their stability under post-growth annealing,” Applied Physics A-Materials Science & Processing, vol. 122, no. 3, 2016. View at Publisher · View at Google Scholar
  • Poulami Ghosh, and Ashwini K. Sharma, “Pulsed laser deposition and characterization of ZnO nanopores,” Applied Physics A-Materials Science & Processing, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • Zhaoguo Qiu, Hongya Yu, Zhongwu Liu, Dechang Zeng, and J. Ping Liu, “Effects of TiN intermediate layer on microstructure and magnetic anisotropy of FePt thin films,” Applied Physics A-Materials Science & Processing, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • Feroz A. Mir, and Khalid Mujasam Batoo, “Effect of Ni and Au ion irradiations on structural and optical properties of nanocrystalline Sb-doped SnO2 thin films,” Applied Physics A-Materials Science & Processing, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • Jaap M. H. Kroes, Fabio Pietrucci, Kiran Chikkadi, Cosmin Roman, Christofer Hierold, and Wanda Andreoni, “The response of single-walled carbon nanotubes to NO2 and the search for a long-living adsorbed species,” Applied Physics Letters, vol. 108, no. 3, pp. 033111, 2016. View at Publisher · View at Google Scholar
  • B. Eren, U. Gysin, L. Marot, Th. Glatzel, R. Steiner, and E. Meyer, “Work function of few layer graphene covered nickel thin films measured with Kelvin probe force microscopy,” Applied Physics Letters, vol. 108, no. 4, pp. 041602, 2016. View at Publisher · View at Google Scholar
  • Feifei Lian, Juan P. Llinas, Zuanyi Li, David Estrada, and Eric Pop, “Thermal conductivity of chirality-sorted carbon nanotube networks,” Applied Physics Letters, vol. 108, no. 10, pp. 103101, 2016. View at Publisher · View at Google Scholar
  • Yao Gao, Yi-Jing Sun, and Tong-Yi Zhang, “Highly reliable and efficient atomic force microscopy based bending test for assessing Young's modulus of one-dimensional nanomaterials,” Applied Physics Letters, vol. 108, no. 12, pp. 123104, 2016. View at Publisher · View at Google Scholar
  • Yi-Jun Pan, Jia-Horng Lin, and Kun-Chien Chiang, “Biomedical Applications of Antibacterial Nanofiber Mats Made of Electrospinning with Wire Electrodes,” Applied Sciences, vol. 6, no. 2, pp. 46, 2016. View at Publisher · View at Google Scholar