About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [12,458 citations: 101–200 of 11,223 articles]

Articles published in Journal of Nanomaterials have been cited 12,458 times. The following is a list of the 11,223 articles that have cited the articles published in Journal of Nanomaterials.

  • Sweety A. Wadhwani, Utkarsha U. Shedbalkar, Richa Singh, and Balu A. Chopade, “Biogenic selenium nanoparticles: current status and future prospects,” Applied Microbiology and Biotechnology, 2016. View at Publisher · View at Google Scholar
  • R. D. Vengrenovich, B. V. Ivanskii, I. I. Panko, and V. I. Kryvetskii, “Ostwald’s ripening of single-layer carbon nanotubes,” Applied Optics, vol. 55, no. 12, pp. B4, 2016. View at Publisher · View at Google Scholar
  • Rawnaq A. Talib, M. J. Abdullah, Naser M. Ahmed, Sabah M. Mohammad, and M. Bououdina, “UV sensing of twinned ZnO–PANI composite,” Applied Physics A, vol. 122, no. 5, 2016. View at Publisher · View at Google Scholar
  • E. Ksinopoulou, A. Bakolas, and A. Moropoulou, “Modifying Si-based consolidants through the addition of colloidal nano-particles,” Applied Physics A, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • M. S. E. Hamroun, L. Guerbous, and A. Bensafi, “Luminescent spectroscopy and structural properties of Ce3+-doped low-temperature X1–Y2SiO5 material prepared by polymer-assisted sol–gel method,” Applied Physics A, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • Veera M. Boddu, and Matthew W. Brenner, “Energy dissipation in intercalated carbon nanotube forests with metal layers,” Applied Physics A-Materials Science & Processing, vol. 122, no. 2, 2016. View at Publisher · View at Google Scholar
  • Sonu Hooda, S. A. Khan, B. Satpati, D. Stange, D. Buca, M. Bala, C. Pannu, D. Kanjilal, and Debdulal Kabiraj, “Effect of ion beam parameters on engineering of nanoscale voids and their stability under post-growth annealing,” Applied Physics A-Materials Science & Processing, vol. 122, no. 3, 2016. View at Publisher · View at Google Scholar
  • Poulami Ghosh, and Ashwini K. Sharma, “Pulsed laser deposition and characterization of ZnO nanopores,” Applied Physics A-Materials Science & Processing, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • Zhaoguo Qiu, Hongya Yu, Zhongwu Liu, Dechang Zeng, and J. Ping Liu, “Effects of TiN intermediate layer on microstructure and magnetic anisotropy of FePt thin films,” Applied Physics A-Materials Science & Processing, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • Feroz A. Mir, and Khalid Mujasam Batoo, “Effect of Ni and Au ion irradiations on structural and optical properties of nanocrystalline Sb-doped SnO2 thin films,” Applied Physics A-Materials Science & Processing, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • Koppole Kamakshi, J. P. B. Silva, K. C. Sekhar, Gregory Marslin, J. Agostinho Moreira, O. Conde, A. Almeida, M. Pereira, and M. J. M. Gomes, “Influence of substrate temperature on the properties of pulsed laser deposited silver nanoparticle thin films and their application in SERS detection of bovine serum albumin,” Applied Physics B, vol. 122, no. 5, 2016. View at Publisher · View at Google Scholar
  • Jaap M. H. Kroes, Fabio Pietrucci, Kiran Chikkadi, Cosmin Roman, Christofer Hierold, and Wanda Andreoni, “The response of single-walled carbon nanotubes to NO2 and the search for a long-living adsorbed species,” Applied Physics Letters, vol. 108, no. 3, pp. 033111, 2016. View at Publisher · View at Google Scholar
  • B. Eren, U. Gysin, L. Marot, Th. Glatzel, R. Steiner, and E. Meyer, “Work function of few layer graphene covered nickel thin films measured with Kelvin probe force microscopy,” Applied Physics Letters, vol. 108, no. 4, pp. 041602, 2016. View at Publisher · View at Google Scholar
  • Feifei Lian, Juan P. Llinas, Zuanyi Li, David Estrada, and Eric Pop, “Thermal conductivity of chirality-sorted carbon nanotube networks,” Applied Physics Letters, vol. 108, no. 10, pp. 103101, 2016. View at Publisher · View at Google Scholar
  • Yao Gao, Yi-Jing Sun, and Tong-Yi Zhang, “Highly reliable and efficient atomic force microscopy based bending test for assessing Young's modulus of one-dimensional nanomaterials,” Applied Physics Letters, vol. 108, no. 12, pp. 123104, 2016. View at Publisher · View at Google Scholar
  • Yi-Jun Pan, Jia-Horng Lin, and Kun-Chien Chiang, “Biomedical Applications of Antibacterial Nanofiber Mats Made of Electrospinning with Wire Electrodes,” Applied Sciences, vol. 6, no. 2, pp. 46, 2016. View at Publisher · View at Google Scholar
  • Amirhosein Berendjchi, Ramin Khajavi, Ali Akbar Yousefi, and Mohammad Esmail Yazdanshenas, “Improved continuity of reduced graphene oxide on polyester fabric by use of polypyrrole to achieve a highly electro-conductive and flexible substrate,” Applied Surface Science, vol. 363, pp. 264–272, 2016. View at Publisher · View at Google Scholar
  • M. Spasova, N. Manolova, N. Markova, and I. Rashkov, “Superhydrophobic PVDF and PVDF-HFP nanofibrous mats with antibacterial and anti-biofouling properties,” Applied Surface Science, vol. 363, pp. 363–371, 2016. View at Publisher · View at Google Scholar
  • R.S. Moraes, E. Saito, D.M.G. Leite, M. Massi, and A.S. da Silva Sobrinho, “Optical, electrical and electrochemical evaluation of sputtered platinum counter electrodes for dye sensitized solar cells,” Applied Surface Science, vol. 364, pp. 229–234, 2016. View at Publisher · View at Google Scholar
  • Zilin Ni, Yanjuan Sun, Yuxin Zhang, and Fan Dong, “Fabrication, modification and application of (BiO)2CO3-based photocatalysts: A review,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Petr Vlcak, “The effect of ion irradiation and elevated temperature on the microstructure and the properties of C/W/C/B multilayer coating,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Way Foong Lim, Hock Jin Quah, Qifeng Lu, Yifei Mu, Wan Azli Wan Ismail, Bazura Abdul Rahim, Siti Rahmah Esa, Yeh Yee Kee, Ce Zhou Zhao, Zainuriah Hassan, and Kuan Yew Cheong, “Effects of rapid thermal annealing on structural, chemical, and electrical characteristics of atomic-layer deposited lanthanum doped zirconium dioxide,” Applied Surface Science, vol. 365, pp. 296–305, 2016. View at Publisher · View at Google Scholar
  • Zhe Wang, Mingchao Xing, Wenkan Fang, and Deyi Wu, “One-step synthesis of magnetite core/zirconia shell nanocomposite for high efficiency removal of phosphate from water,” Applied Surface Science, vol. 366, pp. 67–77, 2016. View at Publisher · View at Google Scholar
  • K.M. Praveen, Sabu Thomas, Yves Grohens, Miran Mozetič, Ita Junkar, Gregor Primc, and Marija Gorjanc, “Investigations of plasma induced effects on the surface properties of lignocellulosic natural coir fibres,” Applied Surface Science, vol. 368, pp. 146–156, 2016. View at Publisher · View at Google Scholar
  • Samira Naghdi, Babak Jaleh, and Nima Shahbazi, “Reversible wettability conversion of electrodeposited graphene oxide/titania nanocomposite coating: Investigation of surface structures,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Hamideh Sardarabadi, Seyed Mahmoud Mousavi, and Ehsan Saljoughi, “Removal of 2-propanol from water by pervaporation using poly (vinylidene fluoride) membrane filled with carbon black,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Lijuan Yan, Yaning Yan, Leilei Xu, Rongrong Ma, Fengxian Jiang, and Xiaohong Xu, “Large range localized surface plasmon resonance of Ag nanoparticles films dependent of surface morphology,” Applied Surface Science, vol. 367, pp. 563–568, 2016. View at Publisher · View at Google Scholar
  • Ceren Yilmaz, and Ugur Unal, “Effect of Zn(NO3)2 Concentration in Hydrothermal-Electrochemical Deposition on Morphology and Photoelectrochemical Properties of ZnO Nanorods,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • A. Laszczyńska, J. Winiarski, B. Szczygieł, and I. Szczygieł, “Electrodeposition and characterization of Ni-Mo-ZrO2 composite coatings,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Abdullah M. Al-Hamdi, Mika Sillanpää, Tanujjal Bora, and Joydeep Dutta, “Efficient photocatalytic degradation of phenol in aqueous solution by SnO2:Sb nanoparticles,” Applied Surface Science, vol. 370, pp. 229–236, 2016. View at Publisher · View at Google Scholar
  • Fang-Hsing Wang, and Chiao-Lu Chang, “Effect of substrate temperature on transparent conducting Al and F co-doped ZnO thin films prepared by rf magnetron sputtering,” Applied Surface Science, vol. 370, pp. 83–91, 2016. View at Publisher · View at Google Scholar
  • Vishnu Shankar Dhandapani, Ramesh Subbiah, Elangovan Thangavel, Madhankumar Arumugam, Kwideok Park, Zuhair M. Gasem, Veeravazhuthi Veeraragavan, and Dae-Eun Kim, “Tribological Properties, Corrosion Resistance and Biocompatibility of Magnetron Sputtered Titanium-Amorphous Carbon Coatings,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • S. Jegatheeswaran, S. Selvam, V. Sri Ramkumar, and M. Sundrarajan, “Facile green synthesis of silver doped fluor-hydroxyapatite/β-cyclodextrin nanocomposite in the dual acting fluorine-containing ionic liquid medium for bone substitute applications,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Salma Falah Toosi, Sona Moradi, Marzieh Ebrahimi, and Savvas G. Hatzikiriakos, “Microfabrication of polymeric surfaces with extreme wettability using hot embossing,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Chiara Zanchi, Andrea Lucotti, Matteo Tommasini, Sebastiano Trusso, Ugo de Grazia, Emilio Ciusani, and Paolo M. Ossi, “Laser tailored nanoparticle arrays to detect molecules at dilute concentration,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Reem A. Al-Alawi, Karthik Laxman, Sarim Dastgir, and Joydeep Dutta, “Role of bonding mechanisms during transfer hydrogenation reaction on heterogeneous catalysts of platinum nanoparticles supported on zinc oxide nanorods,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Marek Klein, Joanna Nadolna, Anna Gołąbiewska, Paweł Mazierski, Tomasz Klimczuk, Hynd Remita, and Adriana Zaleska-Medynska, “The effect of metal cluster deposition route on structure and photocatalytic activity of mono- and bimetallic nanoparticles supported on TiO2 by radiolytic method,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • J.K. Tripathi, T.J. Novakowski, and A. Hassanein, “Tuning surface porosity on vanadium surface by low energy He+ ion irradiation,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Zohreh Shahnavaz, Pei Meng Woi, and Yatimah Alias, “Electrochemical sensing of glucose by reduced graphene oxide-zinc ferrospinels,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Abderrahmen Merghni, Dorra Kammoun, Hajer Hentati, Sébastien Janel, Michka Popoff, Frank Lafont, Mahjoub Aouni, and Maha Mastouri, “Quantification of Staphylococcus aureus adhesion forces on various dental restorative materials using atomic force microscopy,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • R. Martinez-Cuenca, R. Mondragon, L. Hernandez, C. Segarra, J.C. Jarque, T. Hibiki, and J.E. Julia, “Forced-convective heat-transfer coefficient and pressure drop of water-based nanofluids in a horizontal pipe,” Applied Thermal Engineering, 2016. View at Publisher · View at Google Scholar
  • Mehmet Şen, A.Osman Emiroğlu, and M.Bahattin Çelik, “CO and C3H8 oxıdatıon actıvıty of pd/ZnO nanowires/cordıerıte catalyst,” Applied Thermal Engineering, 2016. View at Publisher · View at Google Scholar
  • Weijuan Yang, Mingyue Zhou, Chen Deng, Tiao Huang, Junhu Zhou, Zhihua Wang, Jianzhong Liu, and Kefa Cen, “Experiments on n-heptane combustion with two types of catalyst layouts,” Applied Thermal Engineering, 2016. View at Publisher · View at Google Scholar
  • Amin Sabaghan, Mojtaba Edalatpour, Mohammad Charjouei Moghadam, Ehsan Roohi, and Hamid Niazmand, “Nanofluid flow and heat transfer in a microchannel with longitudinal vortex generators: two-phase numerical simulation,” Applied Thermal Engineering, 2016. View at Publisher · View at Google Scholar
  • Jin Wuk Lee, Eun-Ji Won, Hye-Min Kang, Dae-Sik Hwang, Duck-Hyun Kim, Rae-Kwon Kim, Su-Jae Lee, and Jae-Seong Lee, “Effects of multi-walled carbon nanotube (MWCNT) on antioxidant depletion, the ERK signaling pathway, and copper bioavailability in the copepod (Tigriopus japonicus),” Aquatic Toxicology, vol. 171, pp. 9–19, 2016. View at Publisher · View at Google Scholar
  • Hongxing Chen, Jinling Cao, Lixia Li, Xing Wu, Ran Bi, Paul L. Klerks, and Lingtian Xie, “Maternal transfer and reproductive effects of Cr(VI) in Japanese medaka (Oryzias latipes) under acute and chronic exposures,” Aquatic Toxicology, vol. 171, pp. 59–68, 2016. View at Publisher · View at Google Scholar
  • Li Fu, Yuhong Zheng, Aiwu Wang, Wen Cai, Bo Deng, and Zhi Zhang, “An Electrochemical Sensor Based on Reduced Graphene Oxide and ZnO Nanorods-Modified Glassy Carbon Electrode for Uric Acid Detection,” Arabian Journal For Science And Engineering, vol. 41, no. 1, pp. 135–141, 2016. View at Publisher · View at Google Scholar
  • Moataz M. Mekawy, “Fabrication and characterization of mesoporous silica nanochannels inside the channels of anodic alumina membrane,” Arabian Journal Of Chemistry, vol. 9, no. 2, pp. 269–273, 2016. View at Publisher · View at Google Scholar
  • P.C. Nagajyothi, P. Muthuraman, T.V.M. Sreekanth, Doo Hwan Kim, and Jaesool Shim, “Green synthesis: In-vitro anticancer activity of copper oxide nanoparticles against human cervical carcinoma cells,” Arabian Journal of Chemistry, 2016. View at Publisher · View at Google Scholar
  • Md Niharul Alam, Shaikh Batuta, Giasuddin Ahamed, Sreeparna Das, Debabrata Mandal, and Naznin Ara Begum, “Tailoring the catalytic activity of Au nanoparticles synthesized by a naturally occurring green multifunctional agent,” Arabian Journal of Chemistry, 2016. View at Publisher · View at Google Scholar
  • Julia Karpeta-Kaczmarek, Maria Augustyniak, and Magdalena Rost-Roszkowska, “Ultrastructure of the gut epithelium in Acheta domesticus after long-term exposure to nanodiamonds supplied with food,” Arthropod Structure & Development, 2016. View at Publisher · View at Google Scholar
  • Dilruba Albayrak, and Emine Karakus, “A novel glutamine biosensor based on zinc oxide nanorod and glutaminase enzyme from Hypocria jecorina,” Artificial Cells Nanomedicine And Biotechnology, vol. 44, no. 1, pp. 92–97, 2016. View at Publisher · View at Google Scholar
  • Mohammad Khaledian, Faeze Jiroudhashemi, and Esmaeil Biazar, “Chitosan- and polypropylene-oriented surface modification using excimer laser and their biocompatibility study,” Artificial Cells, Nanomedicine, and Biotechnology, pp. 1–4, 2016. View at Publisher · View at Google Scholar
  • Fatemeh Gorjikhah, Farid Azizi Jalalian, Roya Salehi, Yunes Panahi, Arash Hasanzadeh, Effat Alizadeh, Abolfazl Akbarzadeh, and Soodabeh Davaran, “Preparation and characterization of PLGA-β-CD polymeric nanoparticles containing methotrexate and evaluation of their effects on T47D cell line,” Artificial Cells, Nanomedicine, and Biotechnology, pp. 1–9, 2016. View at Publisher · View at Google Scholar
  • Solmaz Maleki Dizaj, Farzaneh Lotfipour, Mohammad Barzegar-Jalali, Mohammad-Hossein Zarrintan, and Khosro Adibkia, “ Ciprofloxacin HCl-loaded calcium carbonate nanoparticles: preparation, solid state characterization, and evaluation of antimicrobial effect against Staphylococcus aureus ,” Artificial Cells, Nanomedicine, and Biotechnology, pp. 1–9, 2016. View at Publisher · View at Google Scholar
  • Mohammed B. Effat, Chili Wu, and Francesco Ciucci, “Modeling efforts in the key areas of thermal management and safety of lithium ion battery cells: a mini review,” Asia-Pacific Journal of Chemical Engineering, 2016. View at Publisher · View at Google Scholar
  • Thomas Stoerk, “Statistical corruption in Beijing's air quality data has likely ended in 2012,” Atmospheric Environment, vol. 127, pp. 365–371, 2016. View at Publisher · View at Google Scholar
  • Christine V. Moeser, Markus Meissner, Kathrin Laarmann, Katrin Olbrich, Tanya S. King-Himmelreich, Miriam C. Wolters, Gerd Geisslinger, and Ellen Niederberger, “The protein kinase IKKepsilon contributes to tumour growth and tumour pain in a melanoma model,” Biochemical Pharmacology, vol. 103, pp. 64–73, 2016. View at Publisher · View at Google Scholar
  • Carlos Enrique Escárcega-González, Irma Guadalupe Reynoso-Andeola, Fernando Jaramillo-Juárez, Haydée Martínez-Ruvalcaba, and Francisco A. Posadas del Rio, “ The Ginkgo biloba Extract Reverses the Renal Effects of Titanium Dioxide Nanoparticles in Adult Male Rats ,” Biochemistry Research International, vol. 2016, pp. 1–9, 2016. View at Publisher · View at Google Scholar
  • Camelia Ungureanu, Cristina Dumitriu, Simona Popescu, Monica Enculescu, Vlad Tofan, Marian Popescu, and Cristian Pirvu, “Enhancing antimicrobial activity of TiO2/Ti by torularhodin bioinspired surface modification,” Bioelectrochemistry, vol. 107, pp. 14–24, 2016. View at Publisher · View at Google Scholar
  • Wetra Yandi, Sophie Mieszkin, Alessio di Fino, Pierre Martin-Tanchereau, Maureen E. Callow, James A. Callow, Lyndsey Tyson, Anthony S. Clare, and Thomas Ederth, “Charged hydrophilic polymer brushes and their relevance for understanding marine biofouling,” Biofouling, vol. 32, no. 6, pp. 609–625, 2016. View at Publisher · View at Google Scholar
  • Sigrid Zobl, Willi Salvenmoser, Thorsten Schwerte, Ille C Gebeshuber, and Manfred Schreiner, “ Morpho peleides butterfly wing imprints as structural colour stamp ,” Bioinspiration & Biomimetics, vol. 11, no. 1, pp. 016006, 2016. View at Publisher · View at Google Scholar
  • Zhe Cheng, Mengshan Chi, Guangkun Li, Huizhen Chen, Yuan Sui, Hanjv Sun, Michael Wisniewski, Yongsheng Liu, and Jia Liu, “Heat shock improves stress tolerance and biocontrol performance of Rhodotorula mucilaginosa,” Biological Control, vol. 95, pp. 49–56, 2016. View at Publisher · View at Google Scholar
  • Jeroen Mangelschots, Mathieu Bibian, James Gardiner, Lynne J Waddington, Yannick Van Wanseele, Ann Van Eeckhaut, Maria M Diaz Acevedo, Bruno Van Mele, Annemieke Madder, Richard Hoogenboom, and Steven Ballet, “Mixed alpha-beta peptides as a class of short amphipathic peptide hydrogelators with enhanced proteolytic stability,” Biomacromolecules, 2016. View at Publisher · View at Google Scholar
  • Seol-Ha Jeong, Young-Hag Koh, Suk-Wha Kim, Ji-Ung Park, Hyoun-Ee Kim, and Juha Song, “Strong and Biostable Hyaluronic Acid–Calcium Phosphate Nanocomposite Hydrogel via in Situ Precipitation Process,” Biomacromolecules, 2016. View at Publisher · View at Google Scholar
  • Brisa Peña, Valentina Martinelli, Mark Jeong, Susanna Bosi, Romano Lapasin, Matthew R. G. Taylor, Carlin S. Long, Robin Shandas, Daewon Park, and Luisa Mestroni, “Biomimetic Polymers for Cardiac Tissue Engineering,” Biomacromolecules, 2016. View at Publisher · View at Google Scholar
  • Evangelia Tegou, Maria Magana, Alexandra Eleni Katsogridaki, Anastasios Ioannidis, Vassilios Raptis, Sheldon Jordan, Stylianos Chatzipanagiotou, Stavros Chatzandroulis, Catia Ornelas, and George P. Tegos, “Terms of Endearment: Bacteria Meet Graphene Nanosurfaces,” Biomaterials, 2016. View at Publisher · View at Google Scholar
  • Xin Du, Xiaoyu Li, Lin Xiong, Xueji Zhang, Freddy Kleitz, and Shi Zhang Qiao, “Mesoporous silica nanoparticles with organo-bridged silsesquioxane framework as innovative platforms for bioimaging and therapeutic agent delivery,” Biomaterials, vol. 91, pp. 90–127, 2016. View at Publisher · View at Google Scholar
  • Mónica P.A. Ferreira, Sanjeev Ranjan, Alexandra M.R. Correia, Ermei M. Mäkilä, Sini M. Kinnunen, Hongbo Zhang, Mohammad-Ali Shahbazi, Patrick V. Almeida, Jarno J. Salonen, Heikki J. Ruskoaho, Anu J. Airaksinen, Jouni T. Hirvonen, and Hélder A. Santos, “In vitro and in vivo assessment of heart-homing porous silicon nanoparticles,” Biomaterials, 2016. View at Publisher · View at Google Scholar
  • Mohamed A. Abdou Mohamed, Vahid Raeesi, Patricia V. Turner, Anu Rebbapragada, Kate Banks, and Warren C.W. Chan, “A versatile plasmonic thermogel for disinfection of antimicrobial resistant bacteria,” Biomaterials, 2016. View at Publisher · View at Google Scholar
  • Cen Chen, Sumi Bang, Younghak Cho, Sahnghoon Lee, Inseop Lee, ShengMin Zhang, and Insup Noh, “Research trends in biomimetic medical materials for tissue engineering: 3D bioprinting, surface modification, nano/micro-technology and clinical aspects in tissue engineering of cartilage and bone,” Biomaterials Research, vol. 20, no. 1, 2016. View at Publisher · View at Google Scholar
  • Yvoni Kirmanidou, Margarita Sidira, Maria-Eleni Drosou, Vincent Bennani, Athina Bakopoulou, Alexander Tsouknidas, Nikolaos Michailidis, and Konstantinos Michalakis, “New Ti-Alloys and Surface Modifications to Improve the Mechanical Properties and the Biological Response to Orthopedic and Dental Implants: A Review,” BioMed Research International, vol. 2016, pp. 1–21, 2016. View at Publisher · View at Google Scholar
  • Yury N. Shkryl, Victor P. Bulgakov, Galina N. Veremeichik, Svetlana N. Kovalchuk, Valery B. Kozhemyako, Dmitrii G. Kamenev, Irina V. Semiletova, Yana O. Timofeeva, Yury A. Shchipunov, and Yury N. Kulchin, “Bioinspired enzymatic synthesis of silica nanocrystals provided by recombinant silicatein from the marine sponge Latrunculia oparinae,” Bioprocess And Biosystems Engineering, vol. 39, no. 1, pp. 53–58, 2016. View at Publisher · View at Google Scholar
  • Juan C. Alzate Marin, Alejandro H. Caravelli, and Noemi E. Zaritzky, “Nitrification and aerobic denitrification in anoxic-aerobic sequencing batch reactor,” Bioresource Technology, vol. 200, pp. 380–387, 2016. View at Publisher · View at Google Scholar
  • Tevfik Aysu, M.M. Maroto-Valer, and Aimaro Sanna, “Ceria promoted deoxygenation and denitrogenation of Thalassiosira weissflogi and its model compounds by catalytic in-situ pyrolysis,” Bioresource Technology, 2016. View at Publisher · View at Google Scholar
  • Ummalyma Sabeela Beevi, Anil K. Mathew, Ashok Pandey, and Rajeev K. Sukumaran, “Harvesting of microalgal biomass: Efficient method for flocculation through pH modulation,” Bioresource Technology, 2016. View at Publisher · View at Google Scholar
  • Xianwen Kan, Tingting Zhang, Min Zhong, and Xiaojing Lu, “CD/AuNPs/MWCNTs based electrochemical sensor for quercetin dual-signal detection,” Biosensors & Bioelectronics, vol. 77, pp. 638–643, 2016. View at Publisher · View at Google Scholar
  • M. Nuzaihan M.N., U. Hashim, M.K. Md Arshad, S.R. Kasjoo, S.F.A. Rahman, A.R Ruslinda, M.F.M. Fathil, R. Adzhri, and M.M. Shahimin, “Electrical Detection of Dengue Virus (DENV) DNA Oligomer using Silicon Nanowire Biosensor with Novel Molecular Gate Control,” Biosensors and Bioelectronics, 2016. View at Publisher · View at Google Scholar
  • Shafique Pineda, Fabricio Frizera Borghi, Dong Han Seo, Samuel Yick, Malcolm Lawn, Timothy van der Laan, Zhao Jun Han, and Kostya (Ken) Ostrikov, “Multifunctional Graphene Micro-Islands: Rapid, Low-Temperature Plasma-Enabled Synthesis and Facile Integration for Bioengineering and Genosensing Applications,” Biosensors and Bioelectronics, 2016. View at Publisher · View at Google Scholar
  • Laszlo Hajba, and Andras Guttman, “The use of magnetic nanoparticles in cancer theranostics: Toward handheld diagnostic devices,” Biotechnology Advances, 2016. View at Publisher · View at Google Scholar
  • G. Brunello, S. Sivolella, R. Meneghello, L. Ferroni, C. Gardin, A. Piattelli, B. Zavan, and E. Bressan, “Powder-based 3D printing for bone tissue engineering,” Biotechnology Advances, 2016. View at Publisher · View at Google Scholar
  • T. Senthivelan, J. Kanagaraj, and R. C. Panda, “Recent Trends in Fungal Laccase for Various Industrial Applications: An Eco-friendly Approach - A Review,” Biotechnology And Bioprocess Engineering, vol. 21, no. 1, pp. 19–38, 2016. View at Publisher · View at Google Scholar
  • Nadir Ayrilmis, Young-Kyu Lee, Jin Heon Kwon, Tae-Hyung Han, and Hyun-Joong Kim, “Formaldehyde emission and VOCs from LVLs produced with three grades of urea-formaldehyde resin modified with nanocellulose,” Building And Environment, vol. 97, pp. 82–87, 2016. View at Publisher · View at Google Scholar
  • Dhanya Chandran, Lakshmi S Nair, S Balachandran, K Rajendra Babu, and M Deepa, “Band gap narrowing and photocatalytic studies of Nd3+ ion-doped SnO2 nanoparticles using solar energy,” Bulletin of Materials Science, 2016. View at Publisher · View at Google Scholar
  • Jincheng Fan, Tengfei Li, and Hang Heng, “Hydrothermal growth of ZnO nanoflowers and their photocatalyst application,” Bulletin Of Materials Science, vol. 39, no. 1, pp. 19–26, 2016. View at Publisher · View at Google Scholar
  • Purushottam Kumar Singh, Pankaj Kumar, Manowar Hussain, Alok Kumar Das, and Ganesh Chandra Nayak, “Synthesis and characterization of CuO nanoparticles using strong base electrolyte through electrochemical discharge process,” Bulletin of Materials Science, 2016. View at Publisher · View at Google Scholar
  • Naznin Sultana, and Anisah Zainal, “Cellulose acetate electrospun nanofibrous membrane: fabrication, characterization, drug loading and antibacterial properties,” Bulletin of Materials Science, 2016. View at Publisher · View at Google Scholar
  • H S Raghuram, Shravan Pradeep, Subhra Dash, Rajdeep Chowdhury, and Sonal Mazumder, “Chitosan-encapsulated ZnS : M (M: Fe3+ or Mn2+) quantum dots for fluorescent labelling of sulphate-reducing bacteria,” Bulletin of Materials Science, 2016. View at Publisher · View at Google Scholar
  • Hesti Wijayanti, and Apinya Duangchan, “Effect of Nickel Promoter on Solvent-Free Sulphated Zirconia Catalyst for the Esterification of Acetic Acid with n-Butanol,” Canadian Journal Of Chemical Engineering, vol. 94, no. 1, pp. 81–88, 2016. View at Publisher · View at Google Scholar
  • Dan Li, Baoxia Liu, Fei Yang, Xing Wang, Hong Shen, and Decheng Wu, “Preparation of uniform starch microcapsules by premix membrane emulsion for controlled release of avermectin,” Carbohydrate Polymers, vol. 136, pp. 341–349, 2016. View at Publisher · View at Google Scholar
  • Nassima El Miri, Mounir El Achaby, Aziz Fihri, Mohamed Larzek, Mohamed Zahouily, Karima Abdelouahdi, Abdellatif Barakat, and Abderrahim Solhy, “Synergistic effect of cellulose nanocrystals/graphene oxide nanosheets as functional hybrid nanofiller for enhancing properties of PVA nanocomposites,” Carbohydrate Polymers, vol. 137, pp. 239–248, 2016. View at Publisher · View at Google Scholar
  • Juby K. Ajish, K.S. Ajish Kumar, S. Chattopadhyay, and Manmohan Kumar, “Glycopolymeric gel stabilized N-succinyl chitosan beads for controlled doxorubicin delivery,” Carbohydrate Polymers, 2016. View at Publisher · View at Google Scholar
  • Paula I.P. Soares, Ana Isabel Sousa, Jorge Carvalho Silva, Isabel M.M. Ferreira, Carlos M.M. Novo, and João Paulo Borges, “Chitosan-based nanoparticles as drug delivery systems for doxorubicin: optimization and modelling,” Carbohydrate Polymers, 2016. View at Publisher · View at Google Scholar
  • Jinhua Yan, Abdelrahman M. Abdelgawad, MehrezE. El-Naggar, and Orlando J. Rojas, “Antibacterial Activity of Silver Nanoparticles Synthesized In-situ by Solution Spraying onto Cellulose,” Carbohydrate Polymers, 2016. View at Publisher · View at Google Scholar
  • Caichao Wan, and Jian Li, “Cellulose aerogels functionalized with polypyrrole and silver nanoparticles: in-situ synthesis, characterization and antibacterial activity,” Carbohydrate Polymers, 2016. View at Publisher · View at Google Scholar
  • Nattakammala Janpetch, Nagahiro Saito, and Ratana Rujiravanit, “Fabrication of Bacterial Cellulose-ZnO Composite via Solution Plasma Process for Antibacterial Applications,” Carbohydrate Polymers, 2016. View at Publisher · View at Google Scholar
  • Trung Dung Dao, and Han Mo Jeong, “A Pickering emulsion route to a stearic acid/graphene core–shell composite phase change material,” Carbon, vol. 99, pp. 49–57, 2016. View at Publisher · View at Google Scholar
  • Khurram S. Munir, Yuncang Li, Ma Qian, and Cuie Wen, “Identifying and understanding the effect of milling energy on the synthesis of carbon nanotubes reinforced titanium metal matrix composites,” Carbon, vol. 99, pp. 384–397, 2016. View at Publisher · View at Google Scholar
  • Sung-Hyun Lee, Junbeom Park, Hye-Rim Kim, Taeseon Lee, Jaegeun Lee, Yong-O. Im, Cheol-Hun Lee, Hyunjung Cho, Hyeseon Lee, Chi-Hyuck Jun, Yu-Chan Ahn, In-Beum Lee, and Kun-Hong Lee, “Synthesis of carbon nanotube fibers using the direct spinning process based on Design of Experiment (DOE),” Carbon, vol. 100, pp. 647–655, 2016. View at Publisher · View at Google Scholar
  • Tianli Feng, and Xiulin Ruan, “Ultra-low thermal conductivity in graphene nanomesh,” Carbon, vol. 101, pp. 107–113, 2016. View at Publisher · View at Google Scholar